Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Superconducting materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Proximity-induced superconducting gap in the quantum spin Hall edge state of monolayer WTe2

The quantum spin Hall insulator is characterized by a bandgap in the two-dimensional (2D) interior and helical 1D edge states 1 , 2 , 3 . Inducing superconductivity in the helical edge state results in a 1D topological superconductor, a highly sought-after state of matter at the core of many proposals for topological quantum computing 4 . In the present study, we report the coexistence of superconductivity and the quantum spin Hall edge state in a van der Waals heterostructure, by placing a monolayer of 1T'-WTe 2 , a quantum spin Hall insulator 1 , 2 , 3 , on a van der Waals superconductor, NbSe 2 . Using scanning tunnelling microscopy and spectroscopy (STM/STS), we demonstrate that the WTe 2 monolayer exhibits a proximity-induced superconducting gap due to the underlying superconductor and that the spectroscopic features of the quantum spin Hall edge state remain intact. Taken together, these observations provide conclusive evidence for proximity-induced superconductivity in the quantum spin Hall edge state in WTe 2 , a crucial step towards realizing 1D topological superconductivity and Majorana bound states in this van der Waals material platform.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Direct driving of electronic and phononic degrees of freedom in a honeycomb bilayer with infrared light

Here, we study theoretically AB-stacked honeycomb bilayers driven by light in resonance with an infrared phonon within a tight-binding description. We characterize the phonon properties of honeycomb bilayers with group theory and construct an electronic time-dependent tight-binding model for the system following photoexcitation in resonance with an infrared phonon. We adopt an atomically adiabatic approximation [V. Mohanty and E. J. Heller, Proc. Natl. Acad. Sci. 116, 18316 (2019)] to describe classically vibrating nuclei, but obtain the Floquet quasienergy spectrum associated with the time-dependent model exactly. We introduce a general scheme to disentangle the complex low-frequency Floquet spectrum to elucidate the relevant Floquet bands. As a prototypical example, we consider bilayer graphene. We find that light in the low-frequency regime can induce a band gap in the quasienergy spectrum in the vicinity of the $K$ points even if it is linearly polarized, in contrast with the expectations within the Born-Oppenheimer approximation and the high-frequency regime. Finally, we analyze the diabaticity of the driven electron and driven phonon processes and find contrasting effects on the autocorrelation functions at the same driving frequency: Driven phonons preserve the character of the initial state while driven electrons exhibit strong deviations within a few drive cycles. The procedure outlined here can be applied to other materials to describe the combined effects of low-frequency light on phonons and electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Slow electron-phonon relaxation controls the dynamics of the superconducting resistive transition

Here, we investigate the temporal and spatial scales of resistance fluctuations (𝑅 fluctuations) at the superconducting resistive transition accessed through voltage fluctuation measurements in thin epitaxial TiN films. This material is characterized by slow electron-phonon relaxation, which puts it far beyond the applicability range of the textbook scenario of superconducting fluctuations. The measured Lorentzian spectrum of the 𝑅 fluctuations identifies their correlation time, which is nearly constant across the transition region and has no relation to the conventional Ginzburg-Landau timescale. Instead, the correlation time coincides with the energy relaxation time determined by a combination of the electron-phonon relaxation and the relaxation via diffusion into reservoirs. Our data are quantitatively consistent with the model of spontaneous temperature fluctuations and highlight the lack of understanding of the resistive transition in materials with slow electron-phonon relaxation.

critical phenomena↗
DOE OSTI2024

Magnetic functionalization and catalytic behavior of magnetic nanoparticles during laser photochemical graphitization of polyimide

We report laser-assisted photochemical graphitization of polyimides (PIs) into functional magnetic nanocomposites using laser irradiation of PI in the presence of magnetite nanoparticles (MNPs). PI Kapton sheets covered with MNP were photochemically treated under ambient conditions using a picosecond pulsed laser (1064 nm) to obtain an electrically conductive material. Scanning electron microscopy of the treated material revealed a layered magnetic nanoparticle/graphite (MNP/graphite) nanocomposite structure. Four probe conductivity measurements indicated that the nanocomposite has an electrical conductivity of 1550 ± 60 S/m. Superconducting quantum interference device magnetometer-based magnetic characterization of the treated material revealed an anisotropic ferromagnetic response in the MNP/graphite nanocomposite compared to the isotropic response of MNP. Raman spectroscopy of the MNP/graphite nanocomposite revealed a fourfold improvement in graphitization, suppression in disorder, and decreased nitrogenous impurities compared to the graphitic material obtained from laser treatment of just PI sheets. X-ray photoelectron spectroscopy, x-ray diffraction, and energy-dispersive x-ray spectroscopy were used to delineate the phase transformations of MNP during the formation of MNP/graphite nanocomposite. Post-mortem characterization indicates a possible photocatalytic effect of MNP during MNP/graphite nanocomposite formation. Under laser irradiation, MNP transformed from the initial Fe 3 O 4 phase to γ-Fe 2 O 3 and Fe 5 C 2 phases and acted as nucleation spots to catalyze the graphitization process of PI.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Synthesis of Mg2IrH5: A potential pathway to high-Tc hydride superconductivity at ambient pressure

Following long-standing predictions associated with hydrogen, high-temperature superconductivity has recently been observed in several hydride-based materials. Nevertheless, these high-Tc phases only exist at extremely high pressures, and achieving high transition temperatures at ambient pressure remains a major challenge. Recent predictions of the complex hydride Mg2IrH6 may help overcome this challenge with calculations of high-Tc superconductivity (65K

High-temperature superconductors↗
DOE OSTI2022

Separation of Kondo lattice coherence from crystal electric field in CeIn 3 with Nd substitutions

The Ce m M n In 3m+2n (m=1,2;n=0,1) family has been one of the most studied families of heavy fermion compounds. This family has revealed many interesting low-temperature physics phenomena, like quantum critical points, heavy fermion superconductivity, and non-Fermi liquid behavior, when these materials are exposed to pressure, magnetic fields, and/or chemical substitution. In this work, we provide a thorough investigation of the Ce 1-x Nd x In 3 phase diagram through single crystal synthesis, x-ray diffraction, energy-dispersive spectroscopy, magnetic susceptibility, and electrical resistivity measurements. Previous electrical resistivity measurements on CeIn 3 reveal a broad maximum, T max ~50 K, which has been associated with the Kondo lattice coherence crossover and/or the crystal electric field depopulation effect as the 4f electrons condense from the high-energy quartet down to the ground state doublet. Our findings show that in the most disordered substitution region, x=0.4–0.5, these features disjoin to reveal two distinct broad humps in electrical resistivity measurements. Magnetic susceptibility and electrical resistivity data on Ce 1-x Nd x In 3 also reveal the antiferromagnetic ordering competition between CeIn 3 and NdIn 3 , where the T N of CeIn 3 is linearly suppressed to a critical concentration of x Nd ~0.6. This concentration is slightly lower than what was previously reported in nonmagnetically substituted Ce 1-x La x In 3 . Our magnetic susceptibility measurements and subsequent simulations show that in the CeIn 3 antiferromagnetic regime, x Nd ≤0.4, the Nd ions act as free paramagnets. The large magnitude of the associated paramagnetic response then masks the overlapping antiferromagnetic ordering signature of the Ce ions. Overall our study further sheds light on the underlying crystal electric field and Kondo lattice coherence interactions within the Ce m M n In 3m+2n family and could stimulate further studies of these systems via neutron diffraction or under applied pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

General trends of superconducting pairing and magnetic correlations in the Ruddlesden-Popper nickelate 𝑚-layered superconductors La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1

Here, we report a comprehensive theoretical analysis of the Ruddlesden-Popper layered nickelates La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 (𝑚 = 1 to 6) under pressure. These materials have recently received significant attention due to the discovery of superconductivity in some nickelates under pressure. Our results suggest that, while these Ruddlesden-Popper layered nickelates display many similarities, they also show noticeable differences. One of the common features of La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 is that the electronic states near the Fermi level are mainly contributed by Ni 3⁢𝑑 orbitals, slightly hybridized with O 2⁢𝑝 orbitals. The Ni 𝑑 3⁢𝑧 2 −𝑟 2 orbitals display bonding-antibonding, or bonding-antibonding-nonbonding, characteristic splittings, depending on the even or odd number of stacking layers 𝑚. In addition, the ratio of the in-plane interorbital hopping between 𝑑 3⁢𝑧 2 −𝑟 2 and 𝑑 𝑥 2 −𝑦 2 orbitals and in-plane intraorbital hopping between 𝑑 𝑥 2 −𝑦 2 orbitals was found to be large in La 𝑚+1 ⁢Ni 𝑚 ⁢O 3⁢𝑚+1 (𝑚 = 1 to 6), and this ratio increases from 𝑚 = 1 to 𝑚 = 6, suggesting that the in-plane hybridization will increase as the layer number 𝑚 increases. In contrast to the dominant 𝑠 ± -wave state driven by spin fluctuations in the bilayer La 3 ⁢Ni 2⁢ O 7 and trilayer La 4 ⁢Ni 3 ⁢O 10 , two nearly degenerate 𝑑 𝑥 2 −𝑦 2 -wave and 𝑠 ± -wave leading states were obtained in the four-layer stacking La 5⁢ Ni 4 ⁢O 13 and five-layer stacking La 6 ⁢Ni 5 ⁢O 16 . The leading 𝑠 ± -wave state was recovered in the six-layer material La 7 ⁢Ni 6 ⁢O 19 with slightly higher calculated pairing strength 𝜆 than that of the 𝑑 𝑥 2 −𝑦 2 -wave state. All this evidence suggests that both 𝑠 ± -wave and 𝑑 𝑥 2 −𝑦 2 -wave channels are strongly competing in the high-order niceklates based on our random-phase approximation calculations. In general, at the level of the random-phase approximation treatment, the superconducting transition temperature 𝑇 𝑐 decreases in stoichiometric bulk systems from the bilayer La 3 ⁢Ni 2 ⁢O 7 to the six-layer La 7 ⁢Ni 6 ⁢O 19 , despite the 𝑚-dependent dominant pairing. Both in-plane and out-of-plane magnetic correlations are found to be quite complex. Within the in-plane direction, we obtained the peak of the magnetic susceptibility at 𝐪 = (0.6⁢𝜋, 0.6⁢𝜋) for La 5 ⁢Ni 4 ⁢O 13 (𝑚 = 4) and La 7 ⁢Ni 6 ⁢O 19 (𝑚 = 6) and at 𝐪 = (0.7⁢𝜋, 0.7⁢𝜋) for La 6⁢ Ni 5⁢ O 16 (𝑚 = 5). Along the out-of-plane direction, four layers are coupled as ↓−↑−↑−↓ in La 5 ⁢Ni 4⁢ O 13 , five layers are coupled as ↑−↑−↓−↑−↑ in La 6 ⁢Ni 5 ⁢O 16 , and six layers are coupled as ↑−↓−↓−↑−↑−↓ in La 7 ⁢Ni 6 ⁢O 19 .

Zhang, Yang [Univ. of Tennessee, Knoxville, TN (Un↗
DOE OSTI2025

Investigation of kinetic inductance and microwave loss in thin-film TaC x N 1−x superconducting resonators

The promise of tantalum for realizing superconducting quantum devices has generated interest in its compound films, particularly nitrides. Among these, cubic-phase tantalum carbonitride (TaC x N 1−x ) offers reduced susceptibility to oxidation and a high critical temperature, yet its microwave properties remain largely unexplored. Here, in this study, we investigate plasma-enhanced atomic layer deposition of cubic-phase TaC x N 1−x thin films for superconducting microwave circuits. Structural and transport measurements reveal nanocrystalline morphology with sub-10 nm grains and superconductivity in the dirty limit. Coplanar waveguide resonators exhibit moderately high kinetic inductance (16.8 pH/sq for 30 nm films) with potential for enhancement through dimensional scaling. The films also support high internal quality factors exceeding 10 5 at 50 mK in the single-photon regime, comparable to granular aluminum. Loss analysis identifies the two-level systems as the dominant limiting mechanism, with potential for further reduction through interface engineering. These results establish atomic layer deposited TaC x N 1−x as a promising material for scalable, low-loss, high-inductance superconducting circuits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Suppression of ferromagnetic spin fluctuations in the filled skutterudite superconductor SrOs 4 As 12 revealed by As 75 NMR-NQR measurements

Motivated by the recent observation of ferromagnetic spin correlations in the filled skutterudite SrFe 4 As 12 [Q.-P. Ding et al., Phys. Rev. B 98, 155149 (2018)], we have performed 75 As nuclear magnetic resonance (NMR) and nuclear quadrupole resonance (NQR) measurements to investigate the role of magnetic fluctuations in the newly discovered isostructural superconductor SrOs 4 As 12 with a superconducting transition temperature of T c ~ 4.8 K. Here, knight shift K determined by the NQR spectrum under a small magnetic field ( ≤ 0.5 T) is nearly independent of temperature, consistent with the temperature dependence of the magnetic susceptibility. The nuclear spin-lattice relaxation rate divided by temperature, 1/T 1 T, is nearly independent of temperature above ~ 50 K and increases slightly with decreasing temperature below the temperature. The temperature dependence is reasonably explained by a simple model where a flat band structure with a small ledge near the Fermi energy is assumed. By comparing the present NMR data with those in SrFe 4 As 12 , we found that the values of | K | and 1/T 1 T in SrFe 4 As 12 are smaller than those in SrFe 4 As 12 , indicating no obvious ferromagnetic spin correlations in SrFe 4 As 12 . From the temperature dependence of 1/T 1 T in the superconducting state, an s -wave superconductivity is realized.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pseudospin Paramagnons and the Superconducting Dome in Magic Angle Twisted Bilayer Graphene

We present a theory of superconductivity in twisted bilayer graphene in which attraction is generated between electrons on the same honeycomb sublattice when the system is close to a sublattice polarization instability. The resulting Cooper pairs are spin-polarized valley singlets. Because the sublattice polarizability is mainly contributed by interband fluctuations, superconductivity occurs over a wide range of filling fraction. It is suppressed by (i) applying a sublattice polarizing field (generated by an aligned BN substrate) or (ii) changing moiré band filling to favor valley polarization. The enhanced intrasublattice attraction close to sublattice polarization instability is analogous to enhanced like-spin attraction in liquid 3 He near the melting curve and the enhanced valley-singlet repulsion close to valley-polarization instabilities is analogous to enhanced spin-singlet repulsion in metals that are close to a ferromagnetic instability. Here, we comment on the relationship between our pseudospin paramagnon model and the rich phenomenology of superconductivity in twisted bilayer and multilayer graphene.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Multiband effects on the upper critical field angular dependence of 122-family iron pnictide superconductors

Detailed measurements of the in-plane resistivity were performed in a high-quality Ba(Fe 1-x Co x ) 2 As 2 (x=0.065) single crystal, in magnetic fields up to 9 T and with different orientations θ relative to the crystal c axis. A significant ρ(T) H,θ rounding is observed just above the superconducting critical temperature T c due to Cooper pairs created by superconducting fluctuations. These data are analyzed in terms of a generalization of the Aslamazov-Larkin approach, that extends its applicability to high reduced-temperatures and magnetic fields. This method allows us to carry out a criterion-independent determination of the angular dependence of the upper critical field, H c2 (θ). In spite of the relatively small anisotropy of this compound, it is found that H c2 (θ) presents a significant deviation from the single-band 3D anisotropic Ginzburg-Landau (3D-aGL) approach, particularly for large θ (typically above ~60o). These results are interpreted in terms of the multiband nature of these materials, in contrast with other proposals for similar H c2 (θ) anomalies. Our results are also consistent with an effective anisotropy factor almost temperature independent near T c , a result that differs from the ones obtained by using a single-band model.

36 MATERIALS SCIENCE↗
NASA NTRS2013

Superconductors Enable Lower Cost MRI Systems

The future looks bright, light, and green, especially where aircraft are concerned. The division of NASA s Fundamental Aeronautics Program called the Subsonic Fixed Wing Project is aiming to reach new heights by 2025-2035, improving the efficiency and environmental impact of air travel by developing new capabilities for cleaner, quieter, and more fuel efficient aircraft. One of the many ways NASA plans to reach its aviation goals is by combining new aircraft configurations with an advanced turboelectric distributed propulsion (TeDP) system. Jeff Trudell, an engineer at Glenn Research Center, says, "The TeDP system consists of gas turbines generating electricity to power a large number of distributed motor-driven fans embedded into the airframe." The combined effect increases the effective bypass ratio and reduces drag to meet future goals. "While room temperature components may help reduce emissions and noise in a TeDP system, cryogenic superconducting electric motors and generators are essential to reduce fuel burn," says Trudell. Superconductors provide significantly higher current densities and smaller and lighter designs than room temperature equivalents. Superconductors are also able to conduct direct current without resistance (loss of energy) below a critical temperature and applied field. Unfortunately, alternating current (AC) losses represent the major part of the heat load and depend on the frequency of the current and applied field. A refrigeration system is necessary to remove the losses and its weight increases with decreasing temperature. In 2001, a material called magnesium diboride (MgB2) was discovered to be superconducting. The challenge, however, has been learning to manufacture MgB2 inexpensively and in long lengths to wind into large coils while meeting the application requirements.

Source record↗
DOE OSTI2019

Particle rotations and energy dissipation during mechanical compression of granular materials

Here, we present new in-situ measurements of particle rotations and energy dissipation during compression of 3D packings of stiff, frictional particles. Two confined, uniaxial compression tests with different degrees of lateral confinement are discussed. X-ray computed tomography and 3D X-ray diffraction were combined to provide inter-particle forces, slip and roll distances, twist angles, and energy dissipation at all inter-particle contacts. Each of these measured quantities followed exponential distributions above their respective mean values and power-law distributions below their mean values in both experiments. Changes in these distributions during experiments suggest that the quantities generally became more homogeneous with increasing overall sample stress. Contact roll and slip distances, twist angles, and energy dissipation were all more heterogeneous than inter-particle normal force magnitudes in both experiments. Energy dissipation due to inter-particle slipping accounted for 95% of the total energy dissipated in both experiments. Dissipation mechanisms at inter-particle contacts bearing more than the mean normal force were responsible for approximately 70% of each sample’s dissipated energy at each load step, even though these contacts constituted approximately 40% of the total number of contacts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Empowering 2D nanoelectronics via ferroelectricity

Introducing ferroelectricity to two-dimensional (2D) van der Waals (vdW) materials such as graphene, transition metal dichalcogenides, and black phosphorous presents a promising route for developing high-speed and low-power nanoelectronics. This Perspective reviews two actively pursued materials strategies, ferroelectric/vdW heterostructures and vdW ferroelectric materials. Finally, the topics discussed include their application potential and performance limitations as memory, logic, sensing, and optical devices, as well as the challenges and outlook of the field.

2D materials↗
DOE OSTI2019

Superconductivity in Doped Quantum Anomalous Hall Insulators

We study theoretically the superconductivity in doped quantum anomalous Hall insulators based on the Bogoliubov-de Gennes equations. The topological invariant is defined through which the phase diagram is obtained self-consistently. The energy spectrum and the excitations of the possible Majorana Fermions in each phase are discussed. The local density of states is studied. We propose that the zero energy peaks in the local density of states is not sufficient to identify the Majorana Fermions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

An On-Chip Superconducting Kinetic Inductance Fourier Transform Spectrometer for Millimeter-Wave Astronomy

An on-chip FTS consists of two waveguides coupled to long superconducting transmission lines (STLs) (similar to 620 mm) using two coupling probes. The signal propagating on one of the STLs is phase-shifted with respect to the other line with a bias current that affects the nonlinear dependence of kinetic inductance, Lk(I)of the STL material. Here we describe the design and simulation of a superconducting on-chip FTS coupled to a dual polarization W-band (90-110 GHz) waveguide. These devices have applications in ground-based and space-based millimeter-wave spectral surveys.

Fourier transform spectrometer↗
DOE OSTI2021

Evolution of non-Kramers doublets in magnetic field in PrNi 2 Cd 20 and PrPd 2 Cd 20

Praseodymium-based 1-2-20 cage compounds PrT 2 X 20 (T is generally Ti, V, Nb, Ru, Rh, Ir; and X is either Al, Zn, or Cd) provide yet another platform to study nontrivial electronic states of matter ranging from topological and magnetic orders to unconventional multipolar orders and superconductivity. In this paper, we report measurements of the electronic heat capacity in two Pr-based 1-2-20 materials: PrNi 2 Cd 20 and PrPd 2 Cd 20 . We find that the lowest-energy multiplet of the Pr 4f 2 valence configuration is a Γ 3 non-Kramers doublet and the first excited triplet is assumed to be a magnetic Γ 5 . By analyzing the dependence of the energy splitting between the ground and first excited singlet states on an external magnetic field, we found that the maximum in the heat capacity corresponding to the Schottky anomaly in PrPd 2 Cd 20 , unlike PrNi 2 Cd 20 , shows a pronounced linear dependence on an external magnetic field at higher field values. In conclusion, this effect is associated with the exchange interactions between the field-induced magnetic dipole moments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Doubling the superconducting transition temperature of ultraclean wafer-scale aluminum nanofilms

Here, we studied the role of reduced dimensionality and disorder in the superconducting properties of wafer-scale aluminum (Al) nanofilms. This new generation of ultrathin films were grown using molecular beam epitaxy and depict normal-state sheet resistance at least 20 times lower than the quantum resistance ℎ⁡/(4⁢𝑒 2 ). Defying general expectations, the superconducting transition temperature of our films increases with decreasing Al film thickness, reaching 2.4 K for a 3.5-nm-thick Al film grown on GaAs: twice that of bulk Al (1.2 K). Surface phonon softening is shown to impact superconductivity in pure ultrathin films, offering a route for materials engineering in two dimensions.

2-dimensional systems↗