Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Effect of Ce{sup 3+} Ion on Structural and Hyperfine Interaction Studies of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} Ferrites: Useful for Permanent Magnet Applications

Nanoparticles of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2−x}Ce{sub x}O{sub 4} (where x = 0.0, 0.01, 0.015 and 0.02) ferrites are prepared by the modified solution combustion method using a mixture of fuels and are characterized to understand their structural, microstructural and magnetic properties. The X-ray diffraction is used to confirm the formation of a single-phase cubic spinel structure. The average crystallite sizes are calculated using the Scherrer formula and are found to be less than 50 nm. The microstructural features are obtained by the scanning electron microscopy, and the compositional analysis is done by using the energy-dispersive spectroscopy. The transmission electron microscopy (TEM) investigations show that the synthesized ferrites are made up of very fine spherical nanoparticles. The influence of a rare-earth element (Ce{sup 3+}) on the magnetic properties of the samples was studied using the Mössbauer spectroscopy. The Mössbauer spectroscopy reveals the formation of broadened Zeeman lines and quadrupole-split lines and the presence of the Fe{sup 3+} charge state at B sites in the samples. The quadrupole splitting shows that the orientation of the magnetic hyperfine field with respect to the principle axes of the electric field gradient was random. The magnetic hyperfine field values indicate that the A sites have more A-O-B superexchange interactions than the B sites. The coexistence of magnetic sextet and a doublet component on the room-temperature spectra suggests superparamagnetic properties of the nanoparticles. The low-temperature (15 K) Mössbauer spectroscopy explores the paramagnetic relaxation in the nanoparticles. The area under the sextet refers to Fe{sup 3+} concentrations in the tetrahedral and octahedral sites of the ferrite. This study confirms that the Ce{sup 3+} substitution of Fe{sup 3+} only for octahedron sites causes the decrease in Fe-O-Fe arrangement. The effect of Ce{sup 3+} doping on the magnetic properties of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} is examined from the vibrating sample magnetometry (VSM) spectra. Saturation magnetization values are decreased initially and then increased, as result of Ce{sup 3+} doping. This can be explained by Neel’s two-sub-lattice model. Further, the value of coercivity is found to be increasing with increasing Ce{sup 3+} concentration. The obtained results of M-H loop with improved coercivity (from 851 to 1039 Oe) by Ce{sup 3+} doping of Co{sub 0.5}Ni{sub 0.5}Fe{sub 2}O{sub 4} demonstrate the usefulness for permanent magnet applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructural, Magnetic, Magnetocaloric, and Electrical Properties of Ni{sub 0.4}Mg{sub 0.3}Cu{sub 0.3}Fe{sub 2}O{sub 4} Ferrite Prepared Using Sol–Gel Method

Detailed investigations of the microstructural, magnetic, magnetocaloric, and electrical properties of Ni{sub 0.4}Mg{sub 0.3}Cu{sub 0.3}Fe{sub 2}O{sub 4} ferrite synthesized by sol-gel method have been investigated. XRD pattern indicates that sample has cubic spinel structure with Fd 3-bar m symmetry. The cation distribution of the sample has been determined by Rietveld refinement. Temperature dependence of magnetization shows that sample exhibits a second-order PM to FM phase transition at the Curie temperature T{sub C} = 690 K. From the M(μ{sub 0}H,T) data, we found that the maximum entropy change |ΔS{sub M}{sup max}| reaches value of about 1.56 J kg{sup − 1} K{sup − 1} and relative cooling power (RCP) of 136 J kg{sup − 1} at μ{sub 0}H = 5 T. From electrical conductivity curves, the estimated value of the activation energy is equal to 0.349 eV. The Nequist diagram at different temperatures reveals that the grain boundary contribution is responsible to the conduction process for the studied sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Evaluation of the Nanoparticles Coated with Polyvinylpyrrolidone and Polyvinyl Chloride Nanoparticles Synthesized by Electro-deposition Method for Hyperthermia Application

Fe{sub 3}O{sub 4} nanoparticles, coated with polyvinylpyrrolidone (PVP) + polyvinyl chloride (PVC), were synthesized using cathodic electrochemical deposition (CED) technique. Physical properties of the uncoated and PVP + PVC-coated nanoparticles were investigated using several methods including X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), Fourier transform infrared (FT-IR), and AC susceptometer. In both the samples, single-phase formation in cubic spinel structure is detected in the XRD analysis. In this study, the mean crystallite size of the prepared specimens is found to be varied from 10.2 to 8.7 nm after PVP + PVC coating. The results of the FT-TR test thoroughly verified the existence of PVP/PVC layer onto the surface of the electrodeposited NPs, and magnetic results also confirmed a superparamagnetic (SPM) behavior at room temperature for both of them. Coercivity and magnetization saturation reduction have also been observed, despite having lower grain size. Also, weak magnetic interactions of inter-particle and a superspin glass-like behavior at low temperatures are confirmed. In addition, increasing of PVP + PVC content on the surface coating of the magnetic nanoparticles has decreased the inter-particle interactions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Superparamagnetic Properties and Significant Applications of Iron Oxide Nanoparticles for Astonishing Efficacy—a Review

This paper reviewed the comprehensive literature survey on the physical, chemical, and the catalytic properties and applications of iron oxide nanoparticles. In recent years, iron oxide has made a versatile progress due to its outstanding magnetic property. The average crystallite size was reported in previous literatures in the range of 10–45 nm using Scherrer’s formula. The powder morphology was found to deliberate quasi-spherical and predominantly spherical shape. The specific surface area as measured by N{sub 2} adsorption BET isotherm was reported in the range of 17.6–26.21 m{sup 2}/g. Depending on the synthesis pathway there was, an inverse or normal spinel structure could be achieved. X-ray diffraction analysis revealed the crystallite size in the range between 8 and 42 nm. Fourier transform infrared spectroscopy reported the changes in functional group, stretching vibrations in the iron oxide nanoparticles. Scanning electron microscopy analysis showed most of Fe{sub 3}O{sub 4} nanoparticles were in spherical morphology with the particle size range between 10 and 26 nm. Vibrating sample magnetometer reported the magnetization value for Fe{sub 3}O{sub 4} nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Weak Ferroelectricity and Leakage Current Behavior of Multiferroic CoCr{sub 2}O{sub 4} Nanomaterials

Multiferroic CoCr{sub 2}O{sub 4} is synthesized by low-temperature sol-gel auto combustion technique. High energy synchrotron x-ray diffraction pattern confirms the single-phase cubic structure with space group Fd3m. Average crystallite size (17.91 nm) and negative micro-strain (9.86 × 10{sup −4}) are estimated by Williamson–Hall (W-H) plot. FTIR confirms the formation of spinel metal oxide-based cobalt chromites. The strong decrease in ε′ and tan δ at higher frequency can be interpreted by Maxwell-Wagner-type interfacial polarization. Weak ferroelectricity is mainly attributed to the partial reversal of polarization. J-E characteristic reveals the Ohmic (I–V) and Child’s square law (I–V{sup 2}) behavior observed in CoCr{sub 2}O{sub 4} nanomaterials with slope value ~ 1.04 and ~ 1.6, respectively. The conduction process for the leakage current density is interpreted using the space-charge limited current (SCLC) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of Bi{sup 3+} Substitution on Structural, Morphological, and Magnetic Properties of Cobalt Ferrite Nanoparticles

In this research, the structural, morphological, and magnetic properties of Bi-doped cobalt ferrite (CoFe{sub 2-x}Bi{sub x}O{sub 4}) nanoparticles with x = 0.0, 0.05, 1, 0.15, and 0.2, prepared by the sol-gel method, were studied. In order to characterize the samples, several equipment and analyses including thermo-gravimetric and differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), Fourier transform infrared spectrometer (FT-IR), and vibrating sample magnetometer (VSM) were used. The average crystallite sizes of the prepared CoFe{sub 2-x}Bi{sub x}O{sub 4} were calculated using the Scherer, UDM, SSP, and Halder-Wagner methods. The average crystallite sizes for the samples were found in the range of 26 to 44 nm, which can be attributed to the grain growth of the particles. FT-IR spectrum showed bands in the range of 430 to 590 cm{sup −1} due to the stretching vibration of an oxygen atom and metal ions (Fe-O), confirming the formation of spinel ferrite. Surface morphology of the samples was studied using FESEM. The VSM results showed that the saturation and remanence magnetizations increased by raising the doping values up to x = 0.1. The Curie temperature of the cobalt nanoferrites was determined using Faraday’s technique. The highest Curie temperature was found to be 580 °C for the undoped sample.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Transient Oxidation of a γ-Ni-28Cr-11Al Alloy

γ-NiCrAl alloys with relatively low Al contents tend to form a layered oxide scale during the early stages of oxidation, rather than an exclusive α-A l2 O 3 scale, the so-called 'thermally grown oxide' (TGO). A layered oxide scale was established on a model γ-Ni-28Cr-11Al (at.%) alloy after isothermal oxidation for several minutes at 1100 °C. The layered scale consisted of an NiO layer at the oxide/gas interface, an inner Cr 2 O 3 layer, and an α-Al 2 O 3 layer at the oxide/alloy interface. The evolution of such an NiO/Cr 2 O 3 /Al 2 O 3 layered structure on this alloy differs from that proposed in earlier work. During heating, a Cr 2 O 3 outer layer and a discontinuous inner layer of Al 2 O 3 initially formed, with metallic Ni particles dispersed between the two layers. A rapid transformation occurred in the scale shortly after the sample reached maximum temperature (1100°C), when two (possibly coupled) phenomena occurred: (i) the inner transition alumina transformed to α-Al 2 O 3 , and (ii) Ni particles oxidized to form the outer NiO layer. Subsequently, NiO reacted with Cr 2 O 3 and Al 2 O 3 to form spinel. Continued growth of the oxide scale and development of the TGO was dominated by growth of the inner α-Al 2 O 3 layer.

36 MATERIALS SCIENCE↗

Oxidation Characteristics of Fe–18Cr–18Mn-Stainless Steel Alloys

Air oxidation studies of Fe-18Cr-18Mn stainless steels were conducted at 525°C, 625°C, and 725°C. Alloys were evaluated with respect to changes in oxidation properties as a result of interstitial additions of nitrogen and carbon and of minor solute additions of silicon, molybdenum, and nickel. Interstitial concentrations possibly had a small, positive effect on oxidation resistance. Minor solute additions significantly improved oxidation resistance but could also reduce interstitial solubility resulting in formation of chromium carbides. Loss of solute chromium resulted in a slight reduction in oxidation protection. Oxidation lasting over 500 hours produced a manganese rich, duplex oxide structure: an outer sesquioxide and an inner spinel oxide.

36 MATERIALS SCIENCE↗

Evaluation of the Mechanical Properties of Naturally Grown Multilayered Oxides Formed on HCM12A Using Small Scale Mechanical Testing

The microstructure and mechanical integrity of protective multilayered oxide films grown in liquid metal on F/M steel HCM12A was investigated utilizing Raman spectroscopy, nanoindentation and micro-cantilever testing methods. Here, the Raman spectra showed a Fe3O4 outer layer and a Cr-rich spinel structure inner layer. The nanoindentation results showed a higher hardness value for the inner layer than for the outer layer. In addition, the hardness of the diffusion layer in between the inner layer and the bulk steel was measured. Quantitative fracture properties were obtained of the steel/oxide interface and within the oxide layers utilizing microcantilever testing. Furthermore the strength and elastic properties of the multilayered oxide film were measured and it was found that the porous structure in the inner Fe–Cr oxide limits the integrity of the steel/oxide interface.

14 SOLAR ENERGY↗

Oxidation Behavior of Candidate NiCr Alloys for Engine Exhaust Valves: Part I—Effect of Minor Alloying Elements

Oxidation-induced degradation of structural materials employed as exhaust valves within internal combustion engines (ICEs) will be a relevant life-limiting mechanism, in addition to creep and mechanical fatigue, due to ever-increasing severity of operating temperatures and pressures. Ni–Cr-based alloys, which form external chromia-based scales at the relevant operating temperatures are being considered as suitable candidate materials. Thermal cycling of these alloys in water vapor-containing atmospheres, such as those present during hydrocarbon fuel combustion within ICEs, can considerably influence their oxidation behavior. Here, the role of typical alloying additions such as Mn, Si, Al and Ti on the cyclic oxidation behavior of model NiCr–X (X = Mn,Si,Al,Ti) alloys exposed in dry air and air + 10% H 2 O at 800°C and 950°C was investigated. Combined additions of Mn and Si reduced scaling rates compared to binary Ni–22Cr alloys. The presence of water vapor possibly suppressed formation of NiMnCr spinel and thereby the Cr depletion in the alloy. Combined Al and Ti additions mainly resulted in accelerated oxidation kinetics due to the Ti doping of chromia scales. More porous external scales were observed in water vapor leading to a much deeper depth of nitridation in the Ni–22Cr–Al–Ti alloys.

36 MATERIALS SCIENCE↗

Mechanical and Corrosion Response of 316SS in Supercritical CO 2

The supercritical carbon dioxide (s-CO 2 ) Brayton cycle is currently being explored as a replacement for the steam Rankine cycle due to its potential for higher efficiency and lower cycle cost. 316 stainless steel is a candidate alloy for use in s-CO 2 up to roughly 600 °C, but the mechanical effects of prolonged exposure of base and welded material in s-CO 2 have not been analyzed. The potential for carburization makes this an important concern for the implementation of 316 and similar austenitic stainless steels in the s-CO 2 environment. In this study, welded and base material of two types of 316–316L and 316H–were exposed in either s-CO 2 or argon at 550 °C or 750 °C for 1000 h. 550 °C s-CO 2 exposure yielded a thin (< 1 µm) Cr oxide with occasional nodules of duplex Fe oxide and Fe–Cr spinel that were up to 5 microns thick. However, tensile results from s-CO –2 exposure matched those of 550 °C thermal aging in Ar, indicating that no mechanically detrimental carburization occurred in either 316 variant after 1000 h exposure. Conversely, 750 °C s-CO 2 exposure produced roughly 10 × the oxide thickness, with a more substantial Fe oxide (3–5 µm) on the majority of the surface and nodules of up to 40 µm thick. In comparison to aged samples, tensile testing of 750 °C CO 2 -exposed samples revealed ductility loss attributed to carburization. As a result, projections of 316L performance in s-CO 2 indicate that mechanically detrimental carburization—equal to that shown here for 750 °C, 1000 h—will likely be present after 7–14 years of service at 550 °C.

316 stainless steel↗

Reaction Behaviors of Al-Killed Medium-Manganese Steel with Glazed MgO Refractory

In order to understand the reaction mechanism of Al-killed medium-Mn steel with glazed MgO refractory, some laboratory experiments were conducted at [1873 K (1600 °C)]. The refractory rods were glazed by four different basicity slags, and inserted into liquid steel (Mn:5.5 mass pct) for different times. The results show that MgO refractory can react with medium-Mn steel to generate (Mn, Mg)O solid solution with even (Mn, Mg)O-Al{sub 2}O{sub 3} spinel at the boundary of the refractory. When a glaze layer is formed at the edge of a MgO refractory, the glaze layer will supply inclusions into liquid steel and may act as a protection layer for the refractory. Although the glaze could also react with dissolved Mn in steel to generate MnO in both the glaze and refractory, the MnO contents in both the glaze and refractory are evidently lower than that without glaze. The reaction between glazed MgO refractory and liquid steel is influenced by the basicity of the glaze layer. High-basicity slag would hinder the generation of MnO in both the glaze and refractory. Therefore, lower-basicity glaze needs to be avoided for the steelmaking process of medium-Mn steel grades.

36 MATERIALS SCIENCE↗

Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Ti-Stabilized 18Cr Stainless Steel

Characteristics of nozzle clogging and evolution of oxide inclusion were studied by sampling the deposits of submerged entry nozzle (SEN) and the molten steel in tundish during Al-killed Ti-stabilized 18Cr stainless steelmaking process. The deposits found in the clogging of SEN were mainly composed of frozen steel and inclusions. The inclusions in the deposits and tundish were both mainly (MgO-Al{sub 2}O{sub 3}){sub rich}-CaO-TiO{sub x}. The compositions of most inclusions were Liquid+Spinel or Liquid+TiSp phase. The (MgO-Al{sub 2}O{sub 3}){sub rich}-CaO inclusions that were not effectively modified by calcium treatment could be a source of clogging. By combining both the experimental results and thermodynamic calculation, (MgO-Al{sub 2}O{sub 3}){sub rich}-TiO{sub x} inclusions (TiSp inclusions) would be formed with the decreasing temperature in steel during continuous casting, which could be transported and accumulated on the inner wall of the SEN. Increasing the calcium content in the molten steel could decrease the formation of TiSp inclusions. During continuous casting, these inclusions accumulated on the inner wall of the SEN and gradually formed porous network of clog. Molten steel would gradually solidify in the porous space of the clog due to the increased residence time of the molten steel when flowing through it. The clogging gradually increased and caused the shutdown of continuous casting.

36 MATERIALS SCIENCE↗

Effect of Grain Refining on Properties of a Cast Superaustenitic Stainless Steel

The goal of this study was to evaluate the industrial performance of cast high-alloy superaustenitic 19Cr-17Ni-6Mo stainless steel by refining the as-cast structure. A grain-refined, as-cast structure was achieved by the in situ inoculation with titanium nitrides (TiN) co-precipitated on previously formed spinel (MgAl{sub 2}O{sub 4}) inclusions, thus promoting heterogeneous nucleation of austenite during solidification. A homogenization heat treatment of the casting did not provide significant changes of the as-cast grain macrostructure in either the base or grain-refined steels. However, it was found that a combination of inoculation with heat treatment is an effective way of reducing interdendritic segregation. The industrial performance which includes the mechanical properties, corrosion resistance, and machinability was evaluated in the heat-treated condition for both base and inoculated steels. Tensile testing revealed improvements in ultimate tensile strength, ductility, and yield strength of the inoculated steel. The room-temperature impact properties exhibited a slight decrease in average impact energy but showed reduced variability in the inoculated steel compared to the base steel. The machining results showed that the inoculated steel had a slight improvement in machinability. The inoculated steel exhibited a lower corrosion rate but showed an increase in mass loss due to pitting. The changes in steel performance were linked to microstructure and nonmetallic inclusion families obtained by automated ASPEX SEM/EDX analysis.

36 MATERIALS SCIENCE↗

Influence of Two Different Salt Mixture Combinations of Na{sub 2}SO{sub 4}-NaCl-NaVO{sub 3} on Hot Corrosion Behavior of Ni-Base Superalloy Nimonic263 at 800 °C

Isothermal hot corrosion behavior of Nimonic263 alloy was studied under the influence of two different salt mixtures of 87.5 wt.% Na{sub 2}SO{sub 4} + 5 wt.% NaCl + 7.5 wt.% NaVO{sub 3} (3SM) and 74 wt.% Na{sub 2}SO{sub 4} + 21.7 wt.% NaCl + 4.3 wt.% NaVO{sub 3} (3SM-A) and also without salt mixtures up to 500 h at 800 °C. Corrosion kinetics showed that 3SM-A is more aggressive than 3SM. Multiple oxides, spinels, sulfides, vanadate compounds, and volatile compounds were observed during various hot corrosion reactions. The volatile compounds NaClO{sub 3} and CrMoO{sub 3}, and SO{sub 3} gas are attributed to the weight loss under both 3SMs. The Na{sub 2}SO{sub 4} of 3SM prevailed till 400 h, but that of 3SM-A disappeared within 5 h, as established conclusively by Raman spectra analysis. The sulfides plus internal oxide zone increased with the increased exposure duration as evident from the extensive EPMA analysis. Based on the critical analysis of corrosion kinetics and detailed microstructural characterization, fluxing and sulfidation followed by oxidation are identified as plausible hot corrosion mechanisms under both 3SMs. Besides, chlorination and high-temperature oxidation mechanisms occur under 3SM-A condition.

36 MATERIALS SCIENCE↗

High purity Mn 5 O 8 nanoparticles with a high overpotential to gas evolution reactions for high voltage aqueous sodium-ion electrochemical storage

Here, developing electrodes with high specific energy by using inexpensive manganese oxides is of great importance for aqueous electrochemical energy storage (EES) using non-Li charge carriers such as Na-or K-ions. However, the energy density of aqueous EES devices is generally limited by their narrow thermodynamic potential window (~1.23 V). In this paper, the synthesis of high purity layered Mn 5 O 8 nanoparticles through solid state thermal treatment of Mn3O4 spinel nanoparticles, resulting in a chemical formula of [Mn 2 2+ ] [Mn 3 4+ O 8 2– ], evidenced by Rietveld refinement of synchrotron- based X-ray diffraction, has been reported. The electro-kinetic analyses obtained from cyclic voltammetry measurements in half-cells have demonstrated that Mn5O8 electrode has a large overpotential (~ 0.6 V) towards gas evolution reactions, resulting in a stable potential window of 2.5 V in an aqueous electrolyte in half-cell measurements. Symmetric full-cells fabricated using Mn5O8 electrodes can be operated within a stable 3.0 V potential window for 5000 galvanostatic cycles, exhibiting a stable electrode capacity of about 103 mAh/g at a C-rate of 95 with nearly 100% coulombic efficiency and 96% energy efficiency.

25 ENERGY STORAGE↗

Magneto-structural and induction heating properties of MFe2O4 (M?=?Co, Mn, Zn) MNPs for magnetic particle hyperthermia application

The thermal decomposition approach was used for the synthesis of MFe2O4 magnetic nanoparticles (MNPs) by substituting M as Co, Mn, and Zn. The obtained MNPs were characterized for magneto-structural properties using X-Ray diffraction patterns, FTIR, Raman and Mossbauer spectroscopy techniques which confirm the formation of phase pure cubic spinel ferrite with space group Fd3m and five Raman active modes. The size, morphology, and compositional analysis was performed using HRTEM and EDX where the size of MNPs was found to be less than 10 nm that attains superparamagnetism. The magnetic hyperthermia performance of obtained MNPs was evaluated by induction heating experiments at magnetic field range 13.3 to 26.7 kAm-1. The specific absorption rate (SAR) and intrinsic loss power (ILP) values were determined at different magnetic fields within the human tolerable range and correlated with magneto-structural properties to evaluate its potential for possible magnetic particle hyperthermia therapy.

Magnetic nanoparticles, complex-decomposition, mag↗