Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Selection optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Fabrication and Scale-Up of Porous Polybenzimidazole (PBI) Supports for Gas Separation Composite Membranes

Industrial gas separation often uses thin film composite (TFC) membranes comprising a porous support overlaid with a single-/multi-layer gas-selective thin film. An optimal porous support should possess high surface porosity to minimize gas transport resistance and nano-sized pores to ease pore penetration occurring during the thin film coating process. Good chemical and thermal stabilities are essential to withstand the aggressive solvents and heat required for the thin film coating and curing. However, few porous membranes satisfy all these requirements. This study presents a scalable membrane formation method of making highly porous polybenzimidazole (PBI) supports via non-solvent induced phase separation. This presentation also details the scale-up fabrication of PBI supports using a custom roll-to-roll membrane casting machine.

gas separation↗

Precision Kinematic Sunyaev--Zel'dovich Measurements Across Halo Mass and Redshift with DESI DR2 and ACT DR6: Part II. Bright Galaxy Survey and Emission-Line Galaxies

We present the first high-significance spectroscopic stacked kinetic Sunyaev-Zel'dovich (kSZ) measurements of circumgalactic gas profiles for both Bright Galaxy Survey (BGS) and Emission Line Galaxy (ELG) tracers, combining DESI Data Release 2 with ACT Data Release 6. Using reconstructed line-of-sight velocities from the DESI galaxies and high-resolution ACT temperature maps, we detect the kSZ signal at high significance, reaching signal-to-noise ratios of up to $\sim$9 for BGS and $\sim$7.5 for ELGs in optimal stellar-mass selections. Together with the LRG measurements presented in Paper I, these constitute the most significant kSZ detections from any spectroscopic survey to date. We perform the analysis in both real and harmonic space, obtaining consistent results. By splitting both tracers into stellar-mass bins, we study the scaling of the kSZ amplitude with galaxy properties. Combining the kSZ measurements with ACT Data Release 6 (DR6) CMB lensing maps enables a joint calibration of the galaxy-halo connection and the gas fractions of host halos. For the BGS galaxies, we observe low gas fractions around the virial radius relative to standard expectations, likely attributable to active galactic nuclei (AGN) activity. We find some evidence for higher-mass halos retaining a larger fraction of their baryons, consistent with more efficient feedback in lower-mass systems. For the ELG sample, dominated by blue, star-forming galaxies, we provide the first detection of the gas distribution in ELG host halos. The ELGs appear to exhibit relatively high gas fractions, which points to the possibility of weaker feedback (due to e.g. low AGN and supernova feedback activity) at their mass scale. Finally, we present generalized Navarro-Frenk-White (GNFW) fits to the harmonic-space measurements, providing a compact parametrization of gas profiles for forward modeling in large-scale structure analyses.

Hadzhiyska, B. [Cambridge U.; Cambridge U., Inst. ↗

Search for Point Sources of High Energy Neutrinos with Final Data from AMANDA-II

We present a search for point sources of high energy neutrinos using 3.8 years of data recorded by AMANDA-II during 2000-2006. After reconstructing muon tracks and applying selection criteria designed to optimally retain neutrino-induced events originating in the Northern Sky, we arrive at a sample of 6595 candidate events, predominantly from atmospheric neutrinos with primary energy 100 GeV to 8 TeV. Our search of this sample reveals no indications of a neutrino point source. We place the most stringent limits to date on E{sup -2} neutrino fluxes from points in the Northern Sky, with an average upper limit of E{sup 2}{Phi}{sub {nu}{sub {mu}}+{nu}{sub {tau}}} {le} 5.2 x 10{sup -11} TeV cm{sup -2} s{sup -1} on the sum of {nu}{sub {mu}} and {nu}{sub {tau}} fluxes, assumed equal, over the energy range from 1.9 TeV to 2.5 PeV.

79 ASTRONOMY AND ASTROPHYSICS↗

Production and Engineering of Hydrogenase as a Biocatalyst for Hydrogen Fuel

Hydrogenases are fascinating redox proteins, showing tremendous promise in the utilization of hydrogen fuel as a bioelectrocatalyst. They play critical roles in both biohydrogen production and hydrogen oxidation. Specifically, the recently-established comparability of the oxidative activity of the [NiFe]-hydrogenase active site to that of the fuel cell catalyst platinum marks a significant milestone for the potential application of hydrogenase in hydrogen fuel cells to replace platinum. However, the ability of producing hydrogenase in heterologous expression hosts and the sensitivity of hydrogenases to oxygen and carbon monoxide, etc. have seriously limited the viable macroscale utilization and production of hydrogen from the renewable source. A new technology for the production of up-take hydrogenase is being developed for the utilization of hydrogenase as a hydrogen catalyst. The development of this new technology integrates knowledge of structural biology, molecular biology, and principles of metabolic engineering to produce and engineer a stable hydrogenase as a hydrogen bioelectrocatalyst. It contributes to the critical issues of “expensive noble metal catalysts (i.e., platinum) and their limited reserves threatening the long-term sustainability of a hydrogen economy”. It also provides a model to “design natural materials and enzyme catalyst” for “efficient and cost-effective technologies” for a clean and sustainable energy in 21 st century. This new technology includes 3 major components. The first component is the synthetic operons, which carry hydrogenase maturation pathways of Ralstonia eutropha. These synthetic operons are engineered to produce RH hydrogenase in the Escherichia coli strains based on our current molecular and genetic information of hydrogenase maturation mechanisms and pathways of R. eutropha. It presents the first example of producing hydrogenase in the conventional expression host using synthetic biology principles and tool kits. For the high-yield production of the hydrogenase, protein degradation pathways are altered to prevent hydrogenase degradation. This part of the new technology provides a frame work for the design of hydrogenase production pathways for desirable bioengineering purposes. The results of this work are significantly beneficial to research in the areas of enzyme fuel cells, bioelectrocatalyst production, and biohydrogen production as well as basic research in hydrogenase structure biology. The second component of the new technology includes the stable hydrogenase with the improved electrochemical and catalytic properties. With the guidance of the current information on [NiFe] hydrogenase structure, hydrogenase mutants and mutant libraries are generated using protein engineering approaches. The resulting mutants are screened for better hydrogenase stability and catalytic activities. This part of the research results in the identification of new hydrogenase mutants with improved catalytic properties, which can be used for the future studies on enzyme full cells and the catalytic mechanism of hydrogenase. The third component is the optimized production of the selected hydrogenase mutant using current fermentation and metabolic engineering strategies. Metabolic burdens and biomass is balanced using different induction conditions for the optimum production of the engineered hydrogenase in genetically engineered E. coli strains. The success of this work presents a good example of the application of modern fermentation technologies in bioelectrocatalyst production.

08 HYDROGEN↗

MO-FG-CAMPUS-TeP2-05: Optimizing Stereotactic Radiosurgery Treatment of Multiple Brain Metastasis Lesions with Individualized Rotational Arc Trajectories

Purpose: Radiosurgery of multiple (n>4) brain metastasis lesions requires 3–4 noncoplanar VMAT arcs with excessively high monitor units and long delivery time. We investigated whether an improved optimization technique would decrease the needed arc numbers and increase the delivery efficiency, while improving or maintaining the plan quality. Methods: The proposed 4pi arc space optimization algorithm consists of two steps: automatic couch angle selection followed by aperture generation for each arc with optimized control points distribution. We use a greedy algorithm to select the couch angles. Starting from a single coplanar arc plan we search through the candidate noncoplanar arcs to pick a single noncoplanar arc that will bring the best plan quality when added into the existing treatment plan. Each time, only one additional noncoplanar arc is considered making the calculation time tractable. This process repeats itself until desired number of arc is reached. The technique is first evaluated in coplanar arc delivery scheme with testing cases and then applied to noncoplanar treatments of a case with 12 brain metastasis lesions. Results: Clinically acceptable plans are created within minutes. For the coplanar testing cases the algorithm yields singlearc plans with better dose distributions than that of two-arc VMAT, simultaneously with a 12–17% reduction in the delivery time and a 14–21% reduction in MUs. For the treatment of 12 brain mets while Paddick conformity indexes of the two plans were comparable the SCG-optimization with 2 arcs (1 noncoplanar and 1 coplanar) significantly improved the conventional VMAT with 3 arcs (2 noncoplanar and 1 coplanar). Specifically V16 V10 and V5 of the brain were reduced by 11%, 11% and 12% respectively. The beam delivery time was shortened by approximately 30%. Conclusion: The proposed 4pi arc space optimization technique promises to significantly reduce the brain toxicity while greatly improving the treatment efficiency.

60 APPLIED LIFE SCIENCES↗

SU-E-T-562: Motion Tracking Optimization for Conformal Arc Radiotherapy Plans: A QUASAR Phantom Based Study

Purpose: This study is to use plan parameters optimization (Dose rate, collimator angle, couch angle, initial starting phase) to improve the performance of conformal arc radiotherapy plans with motion tracking by increasing the plan performance score (PPS). Methods: Two types of 3D conformal arc plans were created based on QUASAR respiratory motion phantom with spherical and cylindrical targets. Sinusoidal model was applied to the MLC leaves to generate motion tracking plans. A MATLAB program was developed to calculate PPS of each plan (ranges from 0–1) and optimize plan parameters. We first selected the dose rate for motion tracking plans and then used simulated annealing algorithm to search for the combination of the other parameters that resulted in the plan of the maximal PPS. The optimized motion tracking plan was delivered by Varian Truebeam Linac. In-room cameras and stopwatch were used for starting phase selection and synchronization between phantom motion and plan delivery. Gaf-EBT2 dosimetry films were used to measure the dose delivered to the target in QUASAR phantom. Dose profiles and Truebeam trajectory log files were used for plan delivery performance evaluation. Results: For spherical target, the maximal PPS (PPSsph) of the optimized plan was 0.79: (Dose rate: 500MU/min, Collimator: 90°, Couch: +10°, starting phase: 0.83π). For cylindrical target, the maximal PPScyl was 0.75 (Dose rate: 300MU/min, Collimator: 87°, starting phase: 0.97π) with couch at 0°. Differences of dose profiles between motion tracking plans (with the maximal and the minimal PPS) and 3D conformal plans were as follows: PPSsph=0.79: %ΔFWHM: 8.9%, %Dmax: 3.1%; PPSsph=0.52: %ΔFWHM: 10.4%, %Dmax: 6.1%. PPScyl=0.75: %ΔFWHM: 4.7%, %Dmax: 3.6%; PPScyl=0.42: %ΔFWHM: 12.5%, %Dmax: 9.6%. Conclusion: By achieving high plan performance score through parameters optimization, we can improve target dose conformity of motion tracking plan by decreasing total MLC leaf travel distance and leaf speed.

61 RADIATION PROTECTION AND DOSIMETRY↗

Nuclear Technology Selection and Preliminary Integration at St. Charles and Carrollton Chemical Plants

Nuclear energy is identified as a valuable candidate for decarbonizing industrial facilities as a non-emitting baseload energy source capable of dispatching energy as needed for an integrated facility. As industrial facilities are unique, analyzing what nuclear technology is the best candidate should be evaluated on a case-by-case basis. For two identified facilities of the Dow Chemical Company, an ideal mix of nuclear energy resources is calculated, and integration strategies are put forward. This research was funded through a Gateway for Accelerated Innovation in Nuclear (GAIN) Nuclear Energy Voucher, specifically seeking near-term engineering solutions for the technical issue of introducing nuclear generated energy into the Dow chemical facilities. The research is split into four main phases: background on reactors and chemical facilities, preliminary engineering analysis determining how reactor technologies may be integrated with specific facilities, site characterization and discrete hazards analysis, and finally an optimization of reactor-facility selection through the use of Framework for Optimization of ResourCes and Economics (FORCE) tools.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Omic data from evolved E. coli are consistent with computed optimal growth from genome-scale models

After hundreds of generations of mid log phase growth, Escherichia coli acquires a higher growth rate as predicted using flux balance analysis (FBA) on genome-scale metabolic models (GEMs). FBA solutions contain hundreds of variables that can be examined using omics methods. We report that 99% of active reactions from FBA optimal growth solutions are supported by transcriptomic and proteomic data. Moreover, when E. coli adapts to growth rate selective pressure, the resulting evolved strains reinforce the optimal growth predictions. Specifically, through constraint-based analysis of the proteomic and transcriptomic data, we find: 1) selective pressure for the predicted optimal growth states and a minimization of network flux; 2) suppression of genes outside of the optimal growth solutions; and 3) a trend towards usage of more efficient metabolic pathways. For processes not in GEMs, we find 4) an increase in the transcription/translation machinery and stringent response suppression, and 5) that established regulons are significantly down-regulated. Thus, differential expression supports observed growth phenotype changes, and observed expression in evolved strains is consistent with GEM computed optimal growth states.

59 BASIC BIOLOGICAL SCIENCES↗

Molecular layer deposition (MLD) modified SSZ-13 membrane for greatly enhanced H 2 separation

Zeolite membranes with high thermal stability and well-fined pores are attractive for gas separation. However, the defects are almost inevitable in zeolite membranes. Moreover, fine-tuning zeolitic pores for precise molecular separation is challenging. In this study, molecular layer deposition (MLD) was employed to deposit ultrathin microporous coating on SSZ-13 zeolite membrane. The MLD modified SSZ-13 composite membrane was highly selective for H 2 separation. With optimized MLD cycles, H 2 /N 2 and H 2 /CH 4 ideal selectivities as high as 35.6 and 427, respectively, were obtained, in strong contrast with approximately 5 for base SSZ-13 membrane. Our results suggest that MLD is a very promising technology to precisely modify the pore size of zeolite membranes, while minimizing flow through non-selective defects, for gas separation.

36 MATERIALS SCIENCE↗

Contingency Contractor Optimization Phase 3 Extension Quick Start Guide: Contingency Contractor Optimization Tool - Engineering Prototype (Release 2.3)

This Quick Start Guide is an abbreviated version of the Contingency Contractor Optimization Phase 3, User Manual for the Contingency Contractor Optimization Tool engineering prototype. It focuses on providing quick access instructions to the core activities of the two main user roles: Planning Manager and Analyst. Based on an electronic storyboard prototype developed in Phase 2, the Contingency Contractor Optimization Tool engineering prototype was refined in Phase 3 of the OSD ATL Contingency Contractor Optimization to support strategic planning for contingency contractors. The tool uses a model to optimize the total workforce mix by minimizing the combined total costs for the selected mission scenarios. The model will optimize the match of personnel types (military, DoD civilian, and contractors) and capabilities to meet the mission requirements as effectively as possible, based on risk, cost, and other requirements.

42 ENGINEERING↗

Contingency Contractor Optimization Phase 3 Extension User Manual Contingency: Contractor Optimization Tool - Engineering Prototype (Release 2.3)

This User Manual provides step-by-step instructions on the Contingency Contractor Optimization Tool's major features. Activities are organized by user role. The Contingency Contractor Optimization project is intended to address former Secretary Gates' mandate in a January 2011 memo and DoDI 3020.41 by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. Based on an electronic storyboard prototype developed in Phase 2, the Contingency Contractor Optimization Tool engineering prototype was refined in Phase 3 of the OSD ATL Contingency Contractor Optimization project to support strategic planning for contingency contractors. The planning tool uses a model to optimize the Total Force mix by minimizing the combined total costs for the selected mission scenarios. The model will optimize the match of personnel groups (military, DoD civilian, and contractors) and capabilities to meet the mission requirements as effectively as possible, based on risk, cost, and other requirements.

42 ENGINEERING↗

Contingency Contractor Optimization Phase 3 User Manual - Contingency Contractor Optimization Tool Prototype - Release 2.2

This User Manual provides step-by-step instructions on the Contingency Contractor Optimization Tool's major features. Activities are organized by user role. The Contingency Contractor Optimization project is intended to address former Secretary Gates' mandate in a January 2011 memo and DoDI 3020.41 by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. Based on an electronic storyboard prototype developed in Phase 2, the Contingency Contractor Optimization Tool engineering prototype was refined in Phase 3 of the OSD ATL Contingency Contractor Optimization project to support strategic planning for contingency contractors. The planning tool uses a model to optimize the Total Force mix by minimizing the combined total costs for the selected mission scenarios. The model will optimize the match of personnel groups (military, DoD civilian, and contractors) and capabilities to meet the mission requirements as effectively as possible, based on risk, cost, and other requirements.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Contingency Contractor Optimization Phase 3 Quick Start Guide Contingency Contractor Optimization Tool Prototype - Release 2.2

This Quick Start Guide is an abbreviated version of the Contingency Contractor Optimization Phase 3, User Manual for the Contingency Contractor Optimization Tool engineering prototype. It focuses on providing quick access instructions to the core activities of the two main user roles: Planning Manager and Analyst. Based on an electronic storyboard prototype developed in Phase 2, the Contingency Contractor Optimization Tool engineering prototype was refined in Phase 3 of the OSD ATL Contingency Contractor Optimization to support strategic planning for contingency contractors. The tool uses a model to optimize the total workforce mix by minimizing the combined total costs for the selected mission scenarios. The model will optimize the match of personnel types (military, DoD civilian, and contractors) and capabilities to meet the mission requirements as effectively as possible, based on risk, cost, and other requirements.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Contingency Contractor Optimization Engineering Prototype – Release 2.3 (Phase 3 Extension – Training Examples)

This document provides training examples to provide users practice in using the tool. Detailed instructions on how to use the tool can be found in the User Manual (SAND2015-6028).The Contingency Contractor Optimization project is intended to address former Secretary Gates’ mandate in a January 2011 memo and DoDI 3020.41 by delivering a centralized strategic planning tool that allows senior decision makers to quickly and accurately assess the impacts, risks, and mitigation strategies associated with utilizing contract support. Based on an electronic storyboard prototype developed in Phase 2, the CCOT-P engineering prototype was refined in Phase 3 of the OSD ATL Contingency Contractor Optimization project to support strategic planning for contingency contractors. CCOT-P uses a model to optimize the total workforce mix by minimizing the combined total costs for the selected mission scenarios. The model will optimize the match of personnel groups (military, DoD civilian, and contractors) and capabilities to meet the mission requirements as effectively as possible, based on risk, cost, and other requirements.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Smart Microbial Cell Technology: A high-throughput platform to optimize biocatalysts

Los Alamos National Laboratory developed an ultra-high-throughput screening platform to engineer custom biocatalysts that enhance the rate of chemical reactions critical in pharmaceuticals, renewable energy, and environmental cleanup. Current methods to find biocatalysts are slow. This platform scans genetic variations to optimize a single enzyme or microbial cell to generate a product efficiently. It selects rare mutations needed for biocatalyst optimization orders of magnitude faster than current screening methods. A custom sensor reporter gene circuit causes cells to fluoresce when they are making the target product. When coupled to flow cytometry, a million biocatalyst variants can be screened in hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Searching for Turbulent Spectra in Mutliple Spacecraft Observations

The subject of magnetohydrodynamic simulations in the 1980's, magnetic turbulence has reemerged as a favored explanation for the production of fast magnetic reconnection. Recent three-dimensional simulations reveal the formation of secondary islands that serve to shorten the current sheet and increase the accelerating electric field, while both simulations and observations witness electron holes whose collapse energizes electrons. However, little work has been done to investigate the presence of turbulent magnetic and electric field spectra in association with in situ reconnection observations in space. In this study we address this deficiency by analyzing the wavelength spectra of two reconnection events established by multiple spacecraft observations in previous publications. We apply a k-filtering analysis to determine the wave vectors. To optimize the quality of the k-filtering analysis and minimize aliasing, we select multi-spacecraft observations having optimal spacecraft tetrahedral geometry and dimensions that resolve wavelengths within the ion diffusion region. We have chosen one dayside and one nightside reconnection event each observed by the Cluster spacecraft. Spatial correlation between the reconnecting current sheet and a turbulent magnetic spectrum supports an association between turbulence and reconnection in space. The k-filtering method, a wavelet time-frequency spectrum, and a polarization analysis serve to identify wave modes associated with the turbulence. A calculation of the reconnection electric field based on the normal component of the reconnecting magnetic field provides an estimate of the reconnection rate.

Wendel, Deirdre E.↗

Low profile antennas for MSAT applications

For MSAT applications, a number of different antennas have been designed and investigated. They include low gain omnidirectional antennas and medium gain to high gain directional antennas. The latter include both portable and vehicular antennas. While portable units are desirable to be low profile and low cost, the vehicular antennas have proved to be the most challenging antenna types for the mobile satellite application. The results of our efforts in design of such antennas are described briefly. Low profile designs are emphasized in most cases, and microstrip type radiators are therefore selected. The single radiator provides low gain omnidirectional patterns and is optimized for low cost applications. It provides low gains around 2-6 dBic and is useful mostly for the data transmission. Medium to high gain antennas are developed as arrays of omnidirectional elements. Again, different designs are optimized to meet the needs of different applications. For portable units, the array configuration can be flexible and is optimized for maximum broadside gains. For vehicular units, however the configurations are desirable to be low profile, or compact, and have means for scanning the antenna beam. For simplicity, fixed beam antennas with mechanical beam scan are selected. For these antennas, as well, different designs, having low profile or compact size, are selected and optimized to meet the MSAT gain and G/T requirements.

Shafai, L.↗

Aeroelastic Tailoring Study of N+2 Low-Boom Supersonic Commercial Transport Aircraft

The Lockheed Martins N+2 Low-boom Supersonic Commercial Transport (LSCT) aircraft is optimized in this study through the use of a multidisciplinary design optimization tool developed at the NASA Armstrong Flight Research Center. A total of 111 design variables are used in the first optimization run. Total structural weight is the objective function in this optimization run. Design requirements for strength, buckling, and flutter are selected as constraint functions during the first optimization run. The MSC Nastran code is used to obtain the modal, strength, and buckling characteristics. Flutter and trim analyses are based on ZAERO code and landing and ground control loads are computed using an in-house code.

aeroelastic tailoring↗