Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STALLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Flight evaluation of the DEEC secondary control air-start capability

The air-start capability of a secondary engine control (SEC) was tested for a DEEC-equipped F100 engine and installed in an F-15 airplane. Two air-start schedules were tested. The first was referred to as the group I schedule; the second or revised schedule was the group II start schedule. Using the group I start schedule, an airspeed of 300 knots was required to ensure successful 40- and 25-percent SEC-mode air starts. If N2 were less than 40 percent, a stall would occur when the start bleeds closed 40 sec after initiation of the air start. All JFS-assisted air starts were successful with the group start schedule. For the group II schedule, the time between pressurization and start-bleed closure ranged between 50 and 72 sec depending on altitude. All air starts were successful above 225 knots givin a 75-knot reduction in required airspeed for a successful air start. Spooldown air starts of 40 percent were successful at 200 knots at altitudes up to 10,650 m and at 175 knots at altitudes up to 6100 m. Idle rpm was lower than the desired 65 percent for air starts at higher altitudes and lower airspeeds. All JSF-assisted air starts were successful.

Johnson, J. B.↗

Experimental study of the separating confluent boundary-layer. Volume 2: Experimental data

An experimental low speed study of the separating confluent boundary layer on a NASA GAW-1 high lift airfoil is described. The airfoil was tested in a variety of high lift configurations comprised of leading edge slat and trailing edge flap combinations. The primary test instrumentation was a two dimensional laser velocimeter (LV) system operating in a backscatter mode. Surface pressures and corresponding LV derived boundary layer profiles are given in terms of velocity components, turbulence intensities and Reynolds shear stresses as characterizing confluent boundary layer behavior up to and beyond stall. LV derived profiles and associated boundary layer parameters and those obtained from more conventional instrumentation such as pitot static transverse, Preston tube measurements and hot-wire surveys are compared.

Braden, J. A.↗

An experimental study of the properties of surface pressure fluctuations in strong adverse pressure gradient turbulent boundary layers

Experimental data were obtained on blade self-noise generation by strong adverse-pressure-gradient attached boundary layers and by separated turbulent boundary layers that accompany stall. Two microphones were calibrated, placed in plastic housing, and installed in a wind tunnel where observations of acoustic and turbulent signals permitted decomposition of the surface pressure fluctuation signals into the propagated acoustic part and the turbulent-flow generated portion. To determine the convective wave speed of the turbulent contributions, the microphones were spaced a small distance apart in the streamwise direction and correlations were obtained. The turbulent surface pressure spectra upstream of detachment and downstream of the beginning of separation are discussed as well as measurements of turbulent velocity spectra and wavespeeds.

Simpson, R. L.↗

Experimental investigation of tangential blowing applied to a subsonic V/STOL inlet

Engine inlets for subsonic V/STOL aircraft must operate over a wide range of conditions without the severe internal flow separation that can cause sudden changes in engine thrust, excessively high fan blade stresses, and possibly core-compressor stall. An experimental investigation was conducted to evaluate the effectiveness of tangential blowing to maintain attached flow at high inlet angles of attack. The inlet had a relatively thin lip (lip contraction ratio of 1.46). Two blowing slot locations were investigated: one on the lip and the other in the diffuser. The effect of two slot heights (0.0508 and 0.152 cm) and three slot circumferential extents, the largest being 120 deg, also was investigated. The results showed that both lip and diffuser blowing were effective in maintaining attached flow at high angles of attack. However, higher angle-of-attack capability was achieved with lip blowing than with diffuser blowing. This capability was achieved with the largest slot circumferential extent and either of the two slot heights. The tests were conducted in a low-speed wind tunnel at free-stream velocities between 18 and 62 m/sec and inlet angles of attack to 110 deg.

Burley, R. R.↗

The Development of an Airborne Instrumentation Computer System for Flight Test

Instrumentation interfacing frequently requires the linking of intelligent systems together, as well as requiring the link itself to be intelligent. The airborne instrumentation computer system (AICS) was developed to address this requirement. Its small size, approximately 254 by 133 by 140 mm (10 by 51/4 by 51/2 in), standard bus, and modular board configuration give it the ability to solve instrumentation interfacing and computation problems without forcing a redesign of the entire unit. This system has been used on the F-15 aircraft digital electronic engine control (DEEC) and its follow on engine model derivative (EMD) project and in an OV-1C Mohawk aircraft stall speed warning system. The AICS is presently undergoing configuration for use on an F-104 pace aircraft and on the advanced fighter technology integration (AFTI) F-111 aircraft.

Voice synthesizer↗

Unsteady flow in turbomachinery: An overview

The importance of understanding and modeling the unsteady flow phenomena in turbomachinery is discussed. Historical events in the application and development of gas turbines for aircraft propulsion are traced. Technology advancements over the years are highlighted with focus on the compression system components. Trends in compressor research within the National Advisory Committee for Aeronautics (NACA)/National Aeronautics and Space Administration (NASA) are noted. The impact of technology advancements on the increased occurrences of unsteady flow related problems in advanced engine development programs is discussed. The impact of the new and more demanding requirements being imposed on the propulsion system to meet advanced aircraft mission needs are also noted. Brief discussions on the present day understanding and modeling capability of the unsteady flow phenomena are presented to include discussions on rotating stall, surge, flutter, forced response and noise generation.

Source record↗

Aerodynamic characteristics of 2 NASA supercritical airfoils with different maximum thickness

Transonic wind tunnel tests were conducted at Mach numbers from 0.60 to 0.81 to determine the aerodynamic characteristics of two NASA supercritical airfoils. The airfoils had maximum thicknesses of 10 and 11 percent of the chord. Normal forces and pitching moments acting on the airfoils were determined from surface static pressure measurements. Drag forces acting on the airfoils were derived from vertical variations of the total and static pressures measured across the wake. For the thinner airfoil, stall begins at approximately 0.1 higher normal-force coefficient at the higher test Mach numbers, and the drag divergence Mach number at a normal-force coefficient of 0.7 was 0.01 higher.

Harris, C. D.↗

Aerodynamic prediction I

The aerodynamic prediction methodology which is needed for rotor noise calculations is presented. Airloads and wakes, dynamic stall, compressible flow, and random loads are reviewed. The aerodynamics/acoustics interface is defined when the noise or measurements are considered. The classical approach involving a distinct separation of aerodynamic sources and acoustic propagation is the basis of most rotor noise calculations. Aeroacoustics of rotors involve unique features which are not encountered in other aerodynamic problems of rotors: (1) acoustics problems ultimately require only an order of magnitude estimate of the sound pressure field, consequently remarkably good noise predictions are obtained from very simple aerodynamic analyses; (2) aeroacoustics introduce an interest in the higher frequency aerodynamics, the deterministic aerodynamic phenomena are still low frequency, however, the high frequency noise comes from the acoustic propagation; and (3) the aerodynamic phenomena on rotors that are only of interest due to the noise they produce, are the random aerodynamic pressures on the blades.

Johnson, W.↗

Acoustic excitation: A promising new means of controlling shear layers

Techniques have long been sought for the controlled modification of turbulent shear layers, such as in jets, wakes, boundary layers, and separated flows. Relatively recently published results of laboratory experiments have established that coherent structures exist within turbulent flows. These results indicate that even apparently chaotic flow fields can contain deterministic, nonrandom elements. Even more recently published results show that deliberate acoustic excitation of these coherent structures has a significant effect on the mixing characteristics of shear layers. Therefore, we have initiated a research effort to develop both an understanding of the interaction mechanisms and the ability to use it to favorably modify various shear layers. Acoustic excitation circumvents the need for pumping significant flow rates, as required by suction or blowing. Control of flows by intentional excitation of natural flow instabilities involves new and largely unexplored phenomena and offers considerable potential for improving component performance. Nonintrusive techniques for flow field control may permit much more efficient, flexible propulsion systems and aircraft designs, including means of stall avoidance and recovery. The techniques developed may also find application in many other areas where mixing is important, such as reactors, continuous lasers, rocket engines, and fluidic devices. It is the objective of this paper to examine some potential applications of the acoustic excitation technique to various shear layer flows of practical aerospace systems.

Stone, J. R.↗

The Flight Test of an Automatic Spin Prevention System

The paper describes the flight testing of the Spin Prevention and Incidence Limiting System (SPILS) now fitted to the Tornado aircraft. The trial was carried out in parallel with the conventional stalling and spinning trial and the special aircraft equipment and test procedures were common to both trials for much of the time. The use of telemetry was of particular importance to the conduct of the trial and is considered in some detail. The paper then describes the SPILS flight testing, with and without stores, and describes the reasons for the control law modifications required to "fine tune" the performance of the system. In conclusion, consideration is given to the lessons learned from the flight trial.

P S Butcher↗

The Development of an Airborne Instrumentation Computer System for Flight Test

Instrumentation interfacing frequently requires the linking of intelligent systems together, as well as requiring the link itself to be intelligent. The airborne instrumentation computer system (AICS) was developed to address this requirement. Its small size, approximately 254 by 133 by 140 mm (10 by 51/4 by 51/2 in), standard bus, and modular board configuration give it the ability to solve instrumentation interfacing and computation problems without forcing a redesign of the entire unit. This system has been used on the F-15 aircraft digital electronic engine control (DEEC) and its follow on engine model derivative (EMD) project and in an OV-1C Mohawk aircraft stall speed warning system. The AICS is presently undergoing configuration for use on an F-104 pace aircraft and on the advanced fighter technology integration (AFTI) F-111 aircraft.

Glenn A Bever↗

Identification of quasi-steady compressor characteristics from transient data

The principal goal was to demonstrate that nonlinear compressor map parameters, which govern an in-stall response, can be identified from test data using parameter identification techniques. The tasks included developing and then applying an identification procedure to data generated by NASA LeRC on a hybrid computer. Two levels of model detail were employed. First was a lumped compressor rig model; second was a simplified turbofan model. The main outputs are the tools and procedures generated to accomplish the identification.

Nunes, K. B.↗

Time-dependent finite-difference simulation of unsteady interactive flows

The solution of the time-dependent, Reynolds-averaged, Navier-Stokes equations for unsteady, interacting flows by finite-difference algorithms is discussed. Specific examples include (1) unsteady transonic flow over a thick biconvex airfoil, (2) determination of buffet boundaries for a transonic lifting airfoil, (3) the simulation of aileron buzz and (4) dynamic stall. Algorithms considered include explicit methods, mixed (or hybrid) methods, and fully implicit methods. Consideration of time scales for computational stability, computational accuracy, and physical accuracy and the use of time-dependent adaptive meshing to realize computational efficiency are also discussed.

Deiwert, G. S.↗

Analysis of aircraft control strategies for microburst encounter

Analyses have indicated that improved control strategies could reduce the threat posed by the presence of microburst-type wind shear during aircraft takeoffs and landings. The attenuation of flight path response to microburst inputs by feedback control to elevators and throttle was studied for the cases of a jet transport and a general aviation aircraft, using longitudinal equations of motion, root locus analysis, Bode plots of altitude response to wind inputs, and nonlinear numerical simulation. Energy management relative to the airmass, a pitch-up response to the decreasing airspeed, increased phugoid mode damping, and decreased phugoid natural frequency, are found to improve microburst penetration aircraft behavior. Aircraft stall, and throttle saturation, are limiting factors in an aircraft's ability to maintain a given flight path during a microburst encounter.

Stengel, R. F.↗

Calculation of steady and oscillating airfoil flow fields via the Navier Stokes equations

A Navier-Stokes calculation procedure is applied to high Reynolds number flow about steady and unsteady airfoils. The procedure solves the ensemble averaged governing equations via a linearized block implicit (LBI) technique which in general converges to a nominal steady flow within 120 time steps. The grid used in the computation is highly stretched thus resolving the turbulent boundary layers. Calculations have been compared with data for both NACA 4412 airfoil at high incidence and an NACA 0012 airfoil oscillating in dynamic stall. In both cases, good agreement is noted between measured and calculated surface pressure distributions.

Shamroth, S. J.↗

Application of laser velocimetry to unsteady flows in large scale, high speed tunnels

The optical, seeding, and data reduction procedures which have been used in the successful application of laser velocimetry to large-scale, unsteady, transonic wind-tunnel testing are described. Flowfield measurements obtained at several facilities are presented. These results include vortex flow measurements and ensemble-averaged data obtained under conditions of vortex-shedding, dynamic stall airfoil oscillation, oscillating trailing-edge control flaps, and helicopter rotor flow fields.

Owen, F. K.↗

Measurements of self-excited rotor-blade vibrations using optical displacements

The characteristics of optical displacement spectra and their role of monitoring rotor blade vibrations are discussed. During the operation of a turbofan engine at part speed, near stall, and elevated inlet pressure and temperature, several vibratory instabilities were excited simultaneously on the first fan rotor. The torsional and bending contributions to the main flutter mode were resolved by using casing-mounted optical displacement sensors. Other instabilities in the blade deflection spectra were identified. Previously announced in STAR as N83-14523

Kurkov, A. P.↗