Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Improved Electrochemical Performance of Plasma Electrolytic Oxidation Coating on Titanium in Simulated Body Fluid

The effect of plasma electrolytic oxidation (PEO) pre-treatments on corrosion behavior of titanium in simulated body fluid (SBF) is investigated. Three pre-treatments are compared, using silicate, calcium phosphate and mixed silicate and calcium phosphate (1:1) electrolytes, respectively. The resultant coatings in different compositions and morphologies were examined by high-resolution field emission scanning electron microscopy equipped with energy-dispersive spectrometer and x-ray diffraction. The PEO-treated specimens revealed distribution of coating species, mainly the titanium-rich inner coating region. However, findings show highly localized variations in composition within their crystalline structures, due to the melting and rapid solidification of the coating material in three different electrolytes. Corrosion behavior of the coatings was also examined in SBF at 37 °C by potentiodynamic polarization, revealing an improvement in corrosion resistance for mixed electrolyte compared to silicate and calcium phosphate electrolytes.

36 MATERIALS SCIENCE↗

Surface carbonation of synthetic C-S-H samples: A comparison between fresh and aged C-S-H using X-ray photoelectron spectroscopy

This paper presents a continuation of studies into silicate anion structure using X-ray photoelectron spectroscopy (XPS). A series of C-S-H samples have been prepared mechanochemically, and then stored under ambient conditions for six months. Storage led to surface carbonation, the extent of which was dependent upon the calcium/silicon ratio of the fresh sample. Carbonation arose through decalcification of the C-S-H, leading to increased silicate polymerisation. The surfaces of the most calcium-rich phases (C/S = 1.33 and 1.50) underwent complete decalcification to yield silica (possibly containing some silanol groups) and calcium carbonate. Carbonation, and hence changes in silicate anion structure, was minimal for the C-S-H phases with C/S = 0.67 and 0.75.

36 MATERIALS SCIENCE↗

From C–S–H to C–A–S–H: Experimental study and thermodynamic modelling

It has long been known that the stoichiometry of C–S–H varies with the calcium hydroxide concentration in solution. However, this issue is still far from understood. We revisit it in both experimental and modelling aspects. A careful analysis of the solubility confirms the existence of three different C–S–H phases, defined as Ca{sub 4}H{sub 4}Si{sub 5}O{sub 16}, Ca{sub 2}H{sub 2}Si{sub 2}O{sub 7} and Ca{sub 6}(HSi{sub 2}O{sub 7}){sub 2}(OH){sub 2}, respectively. The variation of the Ca/Si ratio of the three phases has been described by surface reactions: the increase of the Si content is accounted for by silicate bridging, the increase of calcium content and the surface charge are accounted for by reactions involving silanol groups via deprotonation and complexation with calcium. In the presence of Al in solution, the uptake of Al by C–S–H is experimentally observed. The Al content increases with Al concentration. C–A–S–H formation is modelled by the competition between silicate and aluminate tetrahedra for the bridging of the dimeric silicates in C–S–H.

36 MATERIALS SCIENCE↗

Characterization of alkali silica reaction gels using Raman spectroscopy

The ability of Raman spectroscopy to characterize amorphous materials makes this technique ideal to study alkali silica reaction (ASR) gels. The structure of several synthetic ASR gels was thoroughly characterized using Raman Spectroscopy. The results were validated with additional techniques such as Fourier transmission infrared spectroscopy, X-ray powder diffraction and thermogravimetric analysis. The Raman spectra were found to have two broad bands in the 800 to 1200 cm{sup −1} range and the 400 to 700 cm{sup −1} range indicating the amorphous nature of the gel. Important information regarding the silicate polymerization was deduced from both of these spectral regions. An increase in alkali content of the gels caused a depolymerization in the silicate framework which manifested in the Raman spectra as a gradual shift of predominant peaks in both regions. The trends in silicate depolymerization were in agreement with results from a NMR spectroscopy study on similar synthetic ASR gels.

36 MATERIALS SCIENCE↗

Investigation on a green olivine nano-silica source based activator in alkali activated slag-fly ash blends: Reaction kinetics, gel structure and carbon footprint

In this paper, a green olivine nano-silica is synthesized and applied as an alternative silicate source to prepare alkali activators, and a commercial waterglass based silica source is studied as a reference. The synthesis route and characterization of olivine nano-silica is presented. The effects of silicate origin and dosage on activator characteristics, reaction kinetics, gel structure and strength are investigated and the CO{sub 2} footprint is evaluated. The results show that increasing the activator modulus significantly increases the high crosslink Q contents in the alkali solution, nano-silica based ones exhibit slightly higher percentages of Q3 sites. Nano-silica based mixes exhibit comparable properties regarding the reaction intensity, chemically bound water content and strength. Gel compositions of both nano-silica and waterglass based samples are characterized in detail by using solid {sup 29}Si and {sup 27}Al MAS NMR. Moreover, replacing commercial waterglass by this alternative silicate source reduces the CO{sub 2} emission between 20.4% and 29.0%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fundamentals of alkali-silica gel formation and swelling: Condensation under influence of dissolved salts

The current theory of ASR gel formation in concrete between silicic acid anions with cations and is unable to explain the differences in concentration required for gel formation between e.g. potassium and sodium or the effect of calcium on the gel formation. In this paper, a new gelation mechanism is explained by means of a condensation between silicic acid anions. The role of salts on the ASR gel formation and gel time is described by their charge screening capacity of the silicic acid, resulting in the decreasing concentration range for gelation: Ca < Mg < Cs < Rb < K < Na < Li. A Cation Gelling Strength (CGS) is defined to assess the cation strength when different cations are present. Silica gel formation will moreover in many cases form a calcium silica precipitate rather than a gel that will be difficult to distinguish from CSH formed during hydration.

36 MATERIALS SCIENCE↗

Influence of calcium and magnesium carbonates on hydration kinetics, hydrate assemblage and microstructural development of metakaolin containing composite cements

The hydration of metakaolin composite cements containing quartz, natural limestone and dolomite rock is studied using a multi-method approach and modelling. The study demonstrates that the calcite present in limestone and dolomite rock is very reactive. Contrary, dolomite does not dissolve. Additionally to the previously reported stabilization of ettringite, the reaction of calcite introduces several changes to the mechanism of metakaolin pozzolanic reaction. Namely, the silicate and aluminate distribution among the hydrates is different. In carbonate containing samples, experimental results supported by the thermodynamic modelling suggest that the silicate mainly precipitates as low Ca/Si C-S-H and additionally the ettringite content is higher. In the case of quartz analogue, the silicates precipitate as strätlingite and C-S-H of higher Ca/Si. These changes cause lower porosity as observed by SEM-BSE and higher strength. High metakaolin reactivity results in a very dense matrix that in turn enables co-existence of phases that are thermodynamically non-compatible.

36 MATERIALS SCIENCE↗

Influence of CaO/FeO ratio on the formation mechanism and properties of alkali-activated Fe-rich slags

Highlights: • Effect of the CaO/FeO molar ratio in alkali-activated Fe-rich slags is unraveled. • Low CaO/FeO molar ratios enhance the early kinetics and compressive strength. • Reaction extent and strength further increase with higher CaO/FeO ratio after 7 days. • Fe{sup 2+}-trioctahedral layers of the binder are hydroxylated and in a silicate phase. • The final strength is determined by the influence of Ca on the reaction products. In the search for CO{sub 2} mitigating cement technologies, alkali-activated Fe-rich slags present a possible alternative. The influence of the chemical composition of the synthetic Fe-silicate slag on the reaction mechanisms is assessed by varying the CaO/FeO molar ratio. The alkali-activated Fe-rich slags consist of trioctahedral layers that are shown to be hydroxylated and in contact with silicates, in a similar way to phyllosilicate minerals. The formation of this phyllosilicate-like structure is hindered during the first days for samples with high CaO/FeO ratios, because of the partial incorporation of Ca in the trioctahedral layers. At later ages, the samples with higher CaO/FeO ratios gain in reaction extent, to exceed the reaction extent of low CaO/FeO ratios at 28 days and beyond. The increase in compressive strength is even more pronounced than the effect on the reaction extent, which underlines the importance of Ca on the inherent strength of the binding phases.

36 MATERIALS SCIENCE↗

Effect of rice husk ash-derived activator on the structural build-up of alkali activated materials

Highlights: • Filtered and unfiltered sodium silicate solutions were synthesised from RHA. • The dissolution efficiency of RHA in NaOH solution was 76.3%. • RHA-derived activator showed a structural build-up comparable to the commercial activator in AAM pastes. • The undissolved residues in the unfiltered RHA-derived activator increased the yield stress. • Comparable compressive strength and early age gel formation were observed from both commercial and RHA-derived solutions. Waste-derived sodium silicates (SSs) were synthesised from rice husk ash (RHA) to produce alkali activated materials (AAMs) using fly ash and slag as precursors. The effects of these SSs on the structural build-up were investigated by monitoring the evolution of the viscoelasticity, ultrasonic pulse waves, setting time, and infrared spectra. Two types of RHA derived SSs (filtered SS and unfiltered SS) were prepared to investigate the effect of the undissolved residue on the hardening process. The derived SS contained a large portion of monomer silicate species. The results showed that the structural build-up mechanism was comparable between the AAMs activated by the filtered SS and a commercial SS. The unfiltered SS increased the yield stress of the paste by up to 10 times. However, the residues in the unfiltered SS had insignificant impacts on the gel formation and compressive strength when using identical SiO{sub 2}/Na{sub 2}O and Na{sub 2}O/binder ratios in the mix design.

36 MATERIALS SCIENCE↗

Spherical Indentation and Implementation of S 3 /P for yield stress determination of brittle materials

Here, a mathematically transparent and robust experimental method has been developed to estimate the yield stress of brittle materials through the analysis of depth-sensing spherical indentation. Employing Hertzian contact mechanics, an elastically invariant ratio based on the simple equation S 3 / P = 6RE r 2 , (where S and P are contact stiffness and indentation load, respectively) has been derived that enables more accurate and confident determination of the transition from elastic to inelastic deformation; a transition that the yield stress dictates and represents. Using two diamond spheres with radii of 3.2 and 8.6 μm, the indentation test method and analyses are applied to two vitreous silicates: Corning's HPFS 7980® fused silica and Vitro's Starphire® soda lime silicate. The estimated yield strengths are 8.15 GPa ± 2.5% for the fused silica and 6.1 GPa ± 3.3% for the soda-lime silicate, and both were independent of indenter radius. Verification of this new experimental method is demonstrated with an as-drawn titanium by showing equivalence of measured yield stress by its spherical indentation and that from uniaxial compression testing. This method will enable easier and more confident estimation of yield stress in brittle materials - a property that historically has been elusive to measure for these materials using common laboratory mechanical test methods.

36 MATERIALS SCIENCE↗

Structure and oxide anion conductivity in Ln{sub 2}(TO{sub 4})O (Ln=La, Nd; T=Ge, Si)

Oxy-silicate and oxy-germanate, Ln{sub 2}(TO{sub 4})O (Ln=La and Nd, T=Ge and Si) compounds have been prepared. Oxy-germanates can be readily obtained as highly crystalline single phases, while, the oxy-silicates are difficult to prepare as pure phases. The crystal structure of Nd{sub 2}(SiO{sub 4})O has been studied from a joint Rietveld refinement of neutron and laboratory X-ray powder diffraction data. The electrochemical characterisation indicates that these compounds display oxide anion conductivity with p-type electronic contribution under oxidising conditions. The apparent activation energies under dry flowing nitrogen, where p-type contribution is minimised, are 0.97(1), 1.05(3) and 1.17(4) eV, for Nd{sub 2}(SiO{sub 4})O, La{sub 2}(GeO{sub 4})O and Nd{sub 2}(GeO{sub 4})O, respectively. The overall conductivities at 1173 K range from 1.2x10{sup -4} S cm{sup -1} for Nd{sub 2}(SiO{sub 4})O to 1.3x10{sup -6} S cm{sup -1} for La{sub 2}(GeO{sub 4})O. Finally, the stability of these compounds under very reducing conditions has been studied and partial degradation is reported. - Graphical abstract: Ln{sub 2}(TO{sub 4})O oxy-silicates and oxy-germanates show ionic conductivities {approx}10{sup -4} S cm{sup -1} at 1173 K with p-type electronic contribution under oxidising conditions. Furthermore, the studied materials are not stable under strongly reducing conditions as shown in the attached figure. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fluorine sites in glasses and transparent glass-ceramics of the system Na{sub 2}O/K{sub 2}O/Al{sub 2}O{sub 3}/SiO{sub 2}/BaF{sub 2}

The transparent glass-ceramics obtained in the silicate system Na{sub 2}O/K{sub 2}O/SiO{sub 2}/BaF{sub 2} show homogeneously dispersed BaF{sub 2} nano crystals with a narrow size distribution. The X-ray diffraction and the nuclear magnetic resonance spectroscopy were applied to glasses and the respective glass-ceramics in order to clarify the crystallization mechanism and the role of fluorine during crystallization. With an increasing annealing time, the concentration and also the number of crystals remain approximately constant. With an increasing annealing temperature, the crystalline fraction increases until a saturation limit is reached, while the number of crystals decreases and the size of the crystals increases. Fluoride in the glassy network occurs as Al-F-Ba, Al-F-Na and also as Ba-F structures. The latter are transformed into crystalline BaF{sub 2} and fluoride is removed from the Al-F-Ba/Na bonds. However, some fluorine is still present in the glassy phase after the crystallization. -- Graphical abstract: The X-ray diffraction and the nuclear magnetic resonance spectroscopy were applied to glasses in the silicate system Na{sub 2}O/K{sub 2}O/SiO{sub 2}/BaF{sub 2} and the respective glass-ceramics with BaF{sub 2} nano crystals in order to clarify the crystallization mechanism and the role of fluorine during crystallization. Display Omitted Research highlights: {yields} BaF{sub 2} nano crystals are precipitated from a silicate glass system. {yields} Ostwald ripening during the late stage of crystallization does not occur. {yields} Fluorine in the glass is coordinated with Ba as well as Al together with Ba or Na.{yields} In the glass-ceramics, the residual fluorine is coordinated as Al-F-Ba/Na.

36 MATERIALS SCIENCE↗

Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7}: Structural, spectroscopic and computational studies on a sorosilicate

Synthesis experiments in the system Li{sub 2}O–CaO–SiO{sub 2} resulted in the formation of single-crystals of Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7}. Structural investigations were based on single-crystal diffraction. At ambient conditions the compound has the following basic crystallographic data: hexagonal symmetry, space group P6{sub 1}22, a=5.0961(2) Å, c=41.264(2) Å, V=928.07(6) Å{sup 3}, Z=6. Structure solution was performed using direct methods. The final least-squares refinement calculations converged at a residual of R(|F|)=0.0260. From a structural point the lithium calcium silicate belongs to the group of pyrosilicates containing [Si{sub 2}O{sub 7}]-groups. Additional lithium and calcium cations are incorporated between the silicate dimers and are coordinated by four and six nearest oxygen neighbours, respectively. Each [LiO{sub 4}]-tetrahedron shares two common corners with directly neighboring tetrahedra forming zweier single-chains which are running parallel to 〈1 0 0〉 in z-levels defined by the presence of the 6{sub 1}{sup [0} {sup 0} {sup 1]}-screw axes. From the corner-sharing [LiO{sub 4}]- and [SiO{sub 4}]-moieties a three dimensional framework can be constructed. An interesting feature of this framework is the presence of an O{sup [3]}-type bridging oxygen linking three tetrahedra (one [LiO{sub 4}]- and two [SiO{sub 4}]-units). Structural similarities with other silicates are discussed in detail. The high-temperature behavior of the Si–O, Ca–O and Li–O bond distances in Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7} was investigated by in{sub -}situ single-crystal X-ray diffraction in the range between 65 and 700 °C. From the evolution of the lattice parameters, the thermal expansion tensor α{sub ij} has been determined. The structural characterization has been supplemented by micro-Raman spectroscopy. Interpretation of the spectroscopic data including the allocation of the bands to certain vibrational species has been aided by DFT-calculations. - Graphical abstract: Framework of [SiO{sub 4}]- and [LiO{sub 4}]-tetrahedra in the crystal structure of Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7}. - Highlights: • We report the crystal structure of the sorosilicate Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7} at ambient conditions. • The thermal expansion tensor as well as the evolution of the structure between 25 and 700 °C was studied. • A topological analysis of the tetrahedral framework based on [SiO{sub 4}]- and [LiO{sub 4}]-units is presented. • The crystal structure of Li{sub 2}Ca{sub 2}Si{sub 2}O{sub 7} is discussed with respect to related compounds. • Interpretation of the Raman spectra of the crystals has been aided by DFT-calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical and mineralogical characterizations of LD converter steel slags: A multi-analytical techniques approach

The use of LD converter steel slags (coming from Linz-Donawitz steelmaking process) as aggregates in road construction can in certain cases lead to dimensional damage due to a macroscopic swelling that is the consequence of chemical reactions. The aim of this study was to couple several analytical techniques in order to carefully undertake chemical and mineralogical characterizations of LD steel slags and identify the phases that are expected to be responsible for their instability. Optical microscopy, scanning electron microscopy and electron probe microanalyses revealed that LD steel slags mainly contain calcium silicates, dicalcium ferrites, iron oxides and lime. However, as a calcium silicate phase is heterogeneous, Raman microspectrometry and transmitted electron microscopy had to be used to characterize it more precisely. Results showed that lime is present under two forms in slag grains: some nodules observed in the matrix whose size ranges from 20 to 100 {mu}m and some micro-inclusions, enclosed in the heterogeneous calcium silicate phase whose size ranges from 1 to 3 {mu}m. It was also established that without the presence of magnesia, lime is expected to be the only phase responsible for LD steel slags instability. Nevertheless, the distribution of lime between nodules and micro-inclusions may play a major role and could explain that similar amounts of lime can induce different instabilities. Thus, it appears that lime content of LD steel slags is not the only parameter to explain their instability.

36 MATERIALS SCIENCE↗

The preparation of zinc silicate/ZnO particles and their use as an efficient UV absorber

Highlights: {yields} We used innovative gel-route in order to prepare zinc silicate/ZnO nano-particles. {yields} Continuous reactor was efficient for synthesizing ZnO and zinc silicate/ZnO precursors. {yields} Introduction of Si into reaction mixture influenced on particle size and their photoactivity. {yields} Prepared particles are appropriate for UV absorbers in polymers. -- Abstract: The formation of zinc silicate/ZnO particles synthesized by a two-step method and their incorporation into PMMA is presented. In the first step a segmented-flow tubular reactor was used for the continuous room-temperature preparation of a zinc silicate/Zn(OH){sub 2} gel that was thermally treated after rinsing and drying in the second step. The same preparation procedure was also employed for the synthesis of pure ZnO and pure zinc silicate particles. It was found that the presence of the zinc silicate phase significantly influenced the final particle size, decreased the degree of crystallization and reduced the particles' UV absorption capabilities. The reduced photocatalytic activity of the zinc silicate/ZnO particles indicated that the majority of ZnO crystallites were formed inside the zinc silicate matrix. The nanocomposite prepared from zinc silicate/ZnO particles (0.04 wt.%) and PMMA showed high UV shielding and at the same time sufficient transmittance in the visible-light region.

36 MATERIALS SCIENCE↗

Towards successful cleaning of chert samples for improved 10Be and 26Al measurements

In situ-produced cosmogenic 10 Be and 26 Al measurements are widely applied in geomorphological studies and in archaeology and paleoanthropology as a chronologic tool applicable to the past 5 Ma. While most of these measurements are made from concentrates of quartz, a ubiquitous and resistant mineral, it is of great interest to extend this method to other silicates and particularly to the amorphous silicates whose purification may not be as straightforward. This paper presents a cleaning procedure that has been applied on ten samples of various siliceous rocks (chert, granite and quartzolite). The aim is to monitor the 10 Be, 27 Al and 26 Al concentration evolution as a function of cleaning steps. While this protocol appears suitable for 10 Be, when measuring 26 Al careful attention should be paid to 27 Al, whose concentration should be measured regularly to ensure that a constant value is achieved and most important, allowing measuring 26 Al/ 27 Al by AMS.

36 MATERIALS SCIENCE↗

Weakening of Calcium Iridate During its Transformation from Perovskite to Post-Perovskite

The lowermost part of the Earth's mantle - the {approx}200-km-thick D{double_prime} layer - shows anomalous seismic properties, and is rheologically distinct from the rest of the lower mantle. The difference is thought to result from a phase transition from silicate perovskite to silicate post-perovskite. However, the rheology of the latter phase remains to be documented owing to experimental difficulties in reproducing pressures equivalent to those in the lowermost mantle. Here we address this problem by conducting laboratory experiments that use calcium iridate, which has been shown to be an appropriate low-pressure analogue. We find that the post-perovskite phase of this analogue is approximately five times weaker than its perovskite phase, and that it further weakens by a factor of two during the phase transformation; these are minimum estimates. If, as is likely, a similar weakening occurs in lower-mantle magnesium - silicate compositions, this could provide an explanation for the behaviour of the lowermost mantle as inferred from geophysical data.

58 GEOSCIENCES↗

X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy investigation of Al-related dipole at the HfO{sub 2}/Si interface

The presence of an ultrathin oxide layer at the high-k/SiO{sub 2} interface may result in an interfacial dipole related to the specific high-k dielectric used for the gate stacks. 1 nm HfO{sub 2}/x nmAl{sub 2}O{sub 3}/SiO{sub 2}/Si stacks with different x values (x=0, 0.4, 0.8, 1.2) have been prepared by atomic layer deposition. Using photoelectron spectroscopy, an Al-related interfacial dipole in the HfO{sub 2}/Al{sub 2}O{sub 3}/SiO{sub 2} gate stack has been identified. X-ray photoelectron spectroscopy analysis shows that the dipole is correlated with the formation of an interfacial Al-silicate. The dipole is located at the Al-silicate interface between Al{sub 2}O{sub 3} and SiO{sub 2}, and its strength increases with the increase in Al{sub 2}O{sub 3} thickness because of Al silicate growth. Such Al-related interfacial dipole should have potential applications in future positive metal-oxide-semiconductor devices.

36 MATERIALS SCIENCE↗