Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RICH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

The influence of electrochemical cycling protocols on capacity loss in nickel-rich lithium-ion batteries

The transition towards electric vehicles and more sustainable transportation is dependent on lithium-ion battery (LIB) performance. Ni-rich layered transition metal oxides, such as NMC811 (LiNi 0.8 Mn 0.1 Co 0.1 O 2 ), are promising cathode candidates for LIBs due to their higher specific capacity and lower cost compared with lower Ni content materials. However, complex degradation mechanisms inhibit their use. In this work, tailored aging protocols are employed to decouple the effect of electrochemical stimuli on the degradation mechanisms in graphite/NMC811 full cells. Using these protocols, impedance measurements, and differential voltage analysis, the primary drivers for capacity fade and impedance rise are shown to be large state of charge changes combined with high upper cut-off voltage. Focused ion beam-scanning electron microscopy highlights that extensive microscale NMC particle cracking, caused by electrode manufacturing and calendering, is present prior to aging and not immediately detrimental to the gravimetric capacity and impedance. Scanning transmission electron microscopy electron energy loss spectroscopy reveals a correlation between impedance rise and the level of transition metal reduction at the surfaces of aged NMC811. The present study provides insight into the leading causes for LIB performance fading, and highlights the defining role played by the evolving properties of the cathode particle surface layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Approaching theoretical specific capacity of iron-rich lithium iron silicate using graphene-incorporation and fluorine-doping

Lithium iron silicate, Li 2 FeSiO 4 , is a promising cathode material for lithium ion batteries due to its high theoretical specific capacity, earth abundance, low cost, and environmental friendliness. The challenges of Li 2 FeSiO 4 as a practical cathode material are (1) the low electronic and ionic conductivity and (2) the low discharge voltage. The approach of incorporating graphene sheets into the nanostructure of Li 2 FeSiO 4 is used for dealing with the low conductivities while fluorine doping is intended to increase the discharge voltage. The fluorine-doped and graphene-incorporated iron-rich lithium iron silicate F-LFSO/G nanomaterials were successfully synthesized using a facile/efficient hydrothermal method with excellent performance, 328.43 mA h g -1 at 0.1C rate, approaching their theoretical specific capacity, 99% of 331 mA h g -1 . This clearly reveals that the reversible (de)lithiation of 2 Li + ions per F-LFSO has been realized as a result of these approaches. The (de)lithiation process has been studied using in operando high energy synchrotron X-ray absorption near edge spectroscopy and X-ray photoelectron spectroscopy aided by theoretical modeling, which reveals that F doping deeply changes the O electron configuration in F-LFSO, and consequently makes the Li + ion transfer easier, while the reversible redox of oxygen can be utilized to achieve high specific capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A nitrogen- and carbonyl-rich conjugated small-molecule organic cathode for high-performance sodium-ion batteries

Organic-based cathode materials have attracted considerable attention for sustainable Na-ion batteries due to their great promise to overcome the issues arising from the insertion of large Na + into the rigid structures of conventional transition-metal-containing inorganic electrodes. The structural flexibility as a result of weak intermolecular interactions and simple electron- and ion-storage mechanisms found in organic compounds ensure facile and reversible transport of Na ions. In order to address the general drawbacks of small-molecule organic electrodes such as material dissolution in commonly used organic electrolytes and poor electronic conductivity, we report the use of a nitrogen- and carbonyl-rich highly extended π-conjugated small molecule, hexaazatrianthranylene (HATA) embedded quinone (HATAQ), as a cathode for sodium-ion batteries. The unique hydrogen bonds between highly functionalized conjugated HATAQ molecules allow supramolecular graphite-like 2D layered arrangements in the solid state which help facilitate the structural stability during long-term cycling and promote charge transfer. The compound delivers a capacity as high as 460 mA h g -1 at 500 mA g -1 and an excellent capacity retention of 99% (~138 mA h g -1 ) after 5000 cycles at an extremely high rate of 60 A g -1 . The reaction kinetics and redox mechanism of the material have been elucidated by several characterization techniques together with density functional theory (DFT) studies. The insights gained in this work could pave the way for ultra-high-performance small-molecule organic cathodes for sustainable energy storage.

25 ENERGY STORAGE↗

Cycloalkane-rich sustainable aviation fuel production via hydrotreating lignocellulosic biomass-derived catalytic fast pyrolysis oils

Sustainable aviation fuel (SAF) produced from lignocellulosic biomass is emerging as an ideal alternative to conventional jet fuel for aviation sector decarbonization. Catalytic fast pyrolysis (CFP) can convert lignocellulosic biomass into relatively stable bio-oil that can be selectively transformed to various transportation fuels through hydroprocessing under conditions of different severities. In this contribution, two CFP oils produced from pine-based feedstocks over different types of catalysts (i.e., ZSM-5 and Pt/TiO 2 catalysts) were hydrotreated at 125 bar in a non-isothermal process with a maximum temperature of 385 °C over a sulfided NiMo/Al 2 O 3 catalyst to produce SAF with high cycloalkane concentrations of 89–92 wt%. Cycloalkanes are an important component of jet fuel with advantageous fuel properties, such as high energy density, low sooting, and potential for replacing aromatic hydrocarbons to provide good seal swelling properties. The hydrotreating process successfully converted 91–92% of the biogenic carbon in the CFP oil intermediates to liquid-phase hydrotreated products. Through distillation, 39–40 wt% of the hydrotreated oils were collected in the jet-fuel range as SAF fractions. The rest of the hydrotreated product could be valorized as fuels (e.g., diesel) or chemicals. The SAF fractions with oxygen contents below the detection limit (<0.01 wt%) met ASTM D7566 finished fuel blend and D4054 Tier 1 specifications with respect to density, lower heating value (LHV), volatility, flash point, and freeze point. These results indicate hydrotreating lignocellulosic biomass-derived CFP oil as a promising pathway to produce high-quality SAF rich in cycloalkanes. Continued research is required to increase the SAF yield by process improvements, such as increased CFP oil yields, and an enhanced production of SAF-range molecules via e.g., cracking of high-molecular weight compounds either during CFP or hydrotreating, as well as evaluation of a broader range of jet fuel properties and performance requirements.

09 BIOMASS FUELS↗

Revealing the structure and electronic characteristics of Te-rich threshold switching materials for high-density integration

Ovonic threshold switching (OTS) selectors play an important role in the integration of advanced three-dimensional memory. Selectors based on tellurium (Te)-containing materials exhibit significant promise due to their low threshold voltages and superior consistency. Here we have theoretically studied the structure and electronic properties of a typical OTS material, amorphous GeTe 6 , to explore the switching mechanisms using ab initio molecular dynamics simulations. The results indicate that Ge atoms tend to bond with Te atoms, forming stable chemical bonds. The Te-centered clusters are predominantly in the form of distorted octahedrons, while the Ge-centered clusters are in the form of both octahedrons and tetrahedrons. Notably, the proportion of tetrahedrons within the 4-coordinated Ge-centered clusters reaches an impressive 66.9%. These tetrahedrons are randomly dispersed throughout the simulated cell, leading to a stable amorphous configuration. The mid-gap state observed in the mobility bandgap originates from the atomic chain composed of both over-coordinated Ge and Te atoms. It is the inherent stability of the chemical environment within amorphous GeTe 6 that enables it to maintain its amorphous phase under a repeated threshold voltage, a characteristic that distinguishes it from non-OTS materials, such as amorphous tellurium. Furthermore, our findings provide an in-depth understanding of the structure and electronic characteristics of amorphous GeTe 6 , which can promote the design and application of the Te-rich threshold switching materials.

36 MATERIALS SCIENCE↗

Enhanced cycling stability of Ni-rich Li-metal cells enabled by dual vinylene carbonate and tris(trimethylsilyl)borate electrolyte additives

NMC811 (LiNi 0.8 Co 0.1 Mn 0.1 O 2 ) and other high-Ni chemistries are promising cathode candidates for high-performance electric vehicles, owing to their high energy density and reduced cobalt content. However, their long-term cycling stability is hindered by surface degradation, particularly when paired with conventional electrolytes and a lithium metal anode. Electrolyte additives represent a practical approach to enhance interfacial stability and improve overall battery performance by promoting the formation of a robust electrolyte–electrode interphase (EEI). In this study, we revisit the effects of vinylene carbonate (VC) and tris(trimethylsilyl)borate (TMSB) additives on single-crystal SC-NMC811||Li cells. While TMSB only increases the open-circuit voltage and initial overpotential, it delivers superior capacity retention at C/3 compared to cells containing only VC or a dual additive system (VC and TMSB). Notably, under fast-charging conditions (1C, 2C, and 5C), the dual-additive system significantly outperforms other formulations, achieving markedly enhanced long-term capacity retention. Comprehensive electrochemical and spectroscopic analyses reveal that the VC/TMSB dual-additive system suppresses surface transition in NMC811, mitigates structural degradation by forming a thin, LiF-deficient cathode-electrolyte interface (CEI) layer. Moreover, they promote smooth and dense Li deposition and generate a LiF-deficient solid-electrolyte interphase (SEI). Consequently, the synergistic stabilization of both the CEI and SEI effectively limits the overall cell impedance growth during extended cycling. These findings provide key insights into co-additive strategies for engineering stable interfaces in high-energy Ni-rich Li-metal batteries.

36 MATERIALS SCIENCE↗

In situ catalyst activation and regeneration enable energy-efficient high-current CO 2 reduction to ethanol-rich C 2+ mixtures

Electrochemical conversion of dissolved CO 2 in bicarbonate electrolytes, i.e., bicarbonate electrolysis, offers distinct advantages over gas diffusion electrode systems by enabling direct utilization of the CO 2 capture electrolyte while bypassing the energy-intensive CO 2 release step. However, bicarbonate electrolysis faces challenges such as CO 2 mass-transfer limitation, local pH-driven CO 2 depletion, and high cathodic potentials. The higher potential often causes catalyst surface reorganization, leading to a gradual loss of active sites and variations in selectivity during CO 2 reduction. Here, we report a directed, in situ activation and regeneration method that allows precatalysts to equilibrate under dynamic (pulsed) electrolysis conditions. We demonstrate in situ activation of a scalable Cu 2 O/Cu mesh that, under short-width (t = 4 s) pulsed electrolysis, provides stable mixed oxidation states of Cu, favoring the formation of an ethanol-rich crude mixture. The pulsed electrolysis waveform, consisting of six distinct segments, is tuned to form Cu + oxides, which are then reduced to generate local alkaline conditions favoring C–C coupling. This synergistic effect results in FEs of 73% for C2+ products and 39% for ethanol at an applied current density of −150 mA cm −2 and a cathodic potential of −1.45 V (vs. RHE). The overall half-cell energy efficiency is ∼30% for C 2+ products. The in situ Raman experiments confirm the role of pCO 2 R in dynamically regenerating Cu+-containing surface species during pulsed operation, thereby steering selectivity towards C 2+ products. A comprehensive multiscale, multiphysics model is developed to investigate the dynamic behavior of copper surface species (Cu, Cu + , and Cu 2+ ) and local microenvironmental conditions during the pCO 2 R. The results reveal that the coexistence of different copper oxidation states, especially the Cu+ intermediate, is critical in steering selectivity towards multicarbon (C 2+ ) products. The dynamic modulation of surface redox states via tailored pulsing strategies favors C–C coupling pathways by inducing localized alkaline conditions and stabilizing reactive intermediates. This work establishes a predictive modeling platform that links pulse waveform design with mechanistic insights into catalyst state evolution and product selectivity. Overall, this study provides valuable insights into the synergistic effect of in situ activation of pre-catalysts and pulsed electrolysis for higher selectivity towards C 2+ products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cannibals in the thick disk II. Radial-velocity monitoring of the young α -rich stars

Determining ages of stars for reconstructing the history of the Milky Way remains one of the most difficult tasks in astrophysics. This involves knowing when it is possible to relate the stellar mass with its age and when it is not. The young α-rich (YAR) stars present such a case in which we are still not sure about their ages because they are relatively massive, implying young ages, but their abundances are α-enhanced, which implies old ages. We report the results from new observations from a long-term radial-velocity-monitoring campaign complemented with high-resolution spectroscopy, as well as new astrometry and seismology of a sample of 41 red giants from the third version of APOKASC, which includes YAR stars. The aim is to better characterize the YAR stars in terms of binarity, mass, abundance trends, and kinematic properties. The radial velocities of HERMES, APOGEE, and Gaia were combined to determine the binary fraction among YAR stars. In combination with their mass estimate, evolutionary status, chemical composition, and kinematic properties, it allowed us to better constrain the nature of these objects. We found that stars with M < 1 M ⊙ were all single, whereas stars with M > 1 M ⊙ could be either single or binary. This is in agreement with theoretical predictions of population synthesis models. Studying their [C/N], [C/Fe], and [N/Fe], trends with mass, it became clear that many YAR stars do not follow the APOKASC stars, favoring the scenario that most of them are the product of mass transfer. Our sample further includes two likely undermassive stars, that is to say of such as low mass that they cannot have reached the red clump within the age of the Universe, unless their low mass is the signature of mass loss in previous evolutionary phases. These stars do not show signatures of currently being binaries. Both YAR and undermassive stars might show some anomalous APOGEE abundances for the elements N, Na, P, K, and Cr; although, higher-resolution optical spectroscopy might be needed to confirm these findings. Considering the significant fraction of stars that are formed in pairs and the variety of ways that makes mass transfer possible, the diversity in properties in terms of binarity, and chemistry of the YAR and undermassive stars studied here implies that most of these objects are likely not young.

79 ASTRONOMY AND ASTROPHYSICS↗

StarHorse results for spectroscopic surveys and Gaia DR3: Chrono-chemical populations in the solar vicinity, the genuine thick disk, and young alpha-rich stars

The Gaia mission has provided an invaluable wealth of astrometric data for more than a billion stars in our Galaxy. The synergy between Gaia astrometry, photometry, and spectroscopic surveys gives us comprehensive information about the Milky Way. Using the Bayesian isochrone-fitting code StarHorse, we derive distances and extinctions for more than 10 million unique stars listed in both Gaia Data Release 3 and public spectroscopic surveys: 557 559 in GALAH+ DR3, 4 531 028 in LAMOST DR7 LRS, 347 535 in LAMOST DR7 MRS, 562 424 in APOGEE DR17, 471 490 in RAVE DR6, 249 991 in SDSS DR12 (optical spectra from BOSS and SEGUE), 67 562 in the Gaia-ESO DR5 survey, and 4 211 087 in the Gaia RVS part of the Gaia DR3 release. StarHorse can increase the precision of distance and extinction measurements where Gaia parallaxes alone would be uncertain. We used StarHorse for the first time to derive stellar ages for main-sequence turnoff and subgiant branch stars, around 2.5 million stars, with age uncertainties typically around 30%; the uncertainties drop to 15% for subgiant-branch-only stars, depending on the resolution of the survey. With the derived ages in hand, we investigated the chemical-age relations. In particular, the α and neutron-capture element ratios versus age in the solar neighbourhood show trends similar to previous works, validating our ages. We used the chemical abundances from local subgiant samples of GALAH DR3, APOGEE DR17, and LAMOST MRS DR7 to map groups with similar chemical compositions and StarHorse ages, using the dimensionality reduction technique t-SNE and the clustering algorithm HDBSCAN. We identify three distinct groups in all three samples, confirmed by their kinematic properties: the genuine chemical thick disk, the thin disk, and a considerable number of young alpha-rich stars (427) that are also a part of the delivered catalogues. We confirm that the genuine thick disk’s kinematics and age properties are radically different from those of the thin disk and compatible with high-redshift (z ≈ 2) star-forming disks with high dispersion velocities. We also find a few extra chemical populations in GALAH DR3 thanks to the availability of neutron-capture element information.

79 ASTRONOMY AND ASTROPHYSICS↗

Isomer-delayed gamma-ray spectroscopy of neutron-rich 166 Tb

Here, this short paper presents the identification of a metastable, isomeric-state decay in the neutron-rich odd-odd, prolate-deformed nucleus 166 Tb. The nucleus of interest was formed using the in-flight fission of a 345 MeV per nucleon 238 U primary beam at the RIBF facility, RIKEN, Japan. Gamma-ray transitions decaying from the observed isomeric states in 166 Tb were identified using the EURICA gamma-ray spectrometer, positioned at the final focus of the BigRIPS fragments separator. The current work identifies a single discrete gamma-ray transition of energy 119 keV which de-excites an isomeric state in 166 Tb with a measured half-life of 3.5(4) μs. The multipolarity assignment for this transition is an electric dipole and is made on the basis internal conversion and decay lifetime arguments. Possible two quasi-particle Nilsson configurations for the initial and final states which are linked by this transition in 166 Tb are made on the basis of comparison with Blocked BCS Nilsson calculations, with the predicted ground state configuration for this nucleus arising from the coupling of the v(1-/2)[521] and π(3+/2) Nilsson orbitals.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonlinear causality and strong hyperbolicity of baryon-rich Israel-Stewart hydrodynamics

We present the first set of fully-nonlinear, necessary and sufficient conditions guaranteeing causal evolution of the initial data for the Israel-Stewart hydrodynamic equations with shear and bulk viscosity coupled to a nonzero baryon current. These constraints not only provide nonlinear causality: they also (a) guarantee the existence of a locally well-posed evolution of the initial data (they enforce strong hyperbolicity) when excluding the endpoints of the bounds, (b) arise from purely algebraic constraints that make no underlying symmetry assumptions on the degrees of freedom and (c) propagate the relevant symmetries of the degrees of freedom over the entire evolution of the problem. Our work enforces a mathematically rigorous foundation for future studies of viscous relativistic hydrodynamics with baryon-rich matter including neutron star mergers and heavy-ion collisions.

Cordeiro, Ian [University of Illinois Urbana-Champ↗

Decay spectroscopy in the neutron-rich Mo–Ru–Pd region

A leading challenge of nuclear-structure research is to understand the properties of nuclides of extreme isospin. Experiments at radioactive-ion-beam facilities, such as the Facility for Rare Isotope Beams in the US, may answer key questions that address diverse topics including fundamental nuclear physics, stellar nucleosynthesis and nuclear applications. The neutron-rich Mo–Ru–Pd (Z = 42 – 46) nuclides are hypothesised to exhibit triaxial-oblate deformation. We performed an experiment with the Facility for Rare Isotope Beams Decay Station initiator (FDSi) to study the structure and decay properties of nuclides in this region. Over 100 different nuclides have been identified in a preliminary analysis of the data. This work presents a first look at several examples between Rb (Z = 37) and Ag (Z = 47). Performance of the FDSi and methods developed to measure ground-state and excited-state lifetimes are presented, and plans for future work are also discussed.

Allmond, James [ORNL] (ORCID:0000000165338721)↗

Synchrotron photoionization mass spectrometry study of intermediates in fuel-rich 1,2-dimethoxyethane flame

Intermediates in a fuel-rich premixed laminar 1,2-dimethoxyethane (DME) flame are studied by molecular beam mass spectrometry combined with tunable synchrotron vacuum ultraviolet photoionization. About 30 intermediate species are identified in the present work, and their mole fraction profiles are evaluated. The experimental results show that the formations of intermediates, both hydrocarbons and oxygenated hydrocarbons, are closely linked to the structure of fuel, which is consistent with the previous reports. Species produced from H atom abstraction and beta scission of DME usually have much higher concentrations than others. The oxygen atoms in DME are considered to act as partitions of the primary intermediates; therefore farther reactions among these primary intermediates are difficult to occur, resulting in absence of most large intermediate species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Constraining the EOS of Neutron-Rich Nuclear Matter and Properties of Neutron Stars with Heavy-Ion Reactions

Heavy-ion reactions especially those induced by radioactive beams provide useful information about the density dependence of the nuclear symmetry energy, thus the Equation of State of neutron-rich nuclear matter, relevant for many astrophysical studies. The latest developments in constraining the symmetry energy at both sub- and supra-saturation densities from analyses of the isopsin diffusion and the {pi}{sup -}/{pi}{sup +} ratio in heavy-ion collisions using the IBUU04 transport model are discussed. Astrophysical ramifications of the partially constrained symmetry energy on properties of neutron star crusts, gravitational waves emitted by deformed pulsars and the w-mode oscillations of neutron stars are presented briefly.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Silicon-rich SiO{sub 2}/SiO{sub 2} multilayers: A promising material for the third generation of solar cell

Si-rich-SiO{sub 2}(SRSO)/SiO{sub 2} multilayers (MLs) have been grown by reactive magnetron sputtering. The presence of silicon nanoclusters (Si-ncls) within the SRSO sublayer and annealing temperature influence optical absorption as well as photoluminescence. The optimized annealing temperature has been found to be 1100 deg. C, which allows the recovery of defects and thus enhances photoluminescence. Four MLs with Si-ncl size ranging from 1.5 to 8 nm have been annealed using the optimized conditions and then studied by transmission measurements. Optical absorption has been modeled so that a size effect in the linear absorption coefficient alpha (in cm{sup -1}) has been evidenced and correlated with TEM observations. It is demonstrated that amorphous Si-ncl absorption is fourfold higher than that of crystalline Si-ncls.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charging effect and capacitance modulation of Ni-rich NiO thin film

In this letter, Ni-rich NiO thin film is deposited on p-type Si substrate by dc magnetron sputtering to form a metal-insulator-semiconductor structure. The charge trapping in the Ni nanocrystals (nc-Ni) embedded in NiO matrix induces a flatband voltage shift and capacitance modulation, which could be used for memory applications. The charging of nc-Ni depends on the voltage polarity, as well as the charging time and magnitude of gate voltage. The capacitance modulation can be described by an equivalent circuit model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation on the role of nitrogen in crystallization of Sb-rich phase change materials

To better understand the role of nitrogen (N) during crystallization of Sb-rich phase change materials, a study was conducted using Sb and Sb{sub 70}Te{sub 30} as host materials of N. Crystallization of the as-sputtered Sb-N films of varying N content was examined to reveal that Sb-N bonds are formed in the as-sputtered states, enhancing amorphous phase stability increasingly with N content. Crystallization appeared to proceed with irreversible dissociation of these bonds to form N{sub 2} molecules that may then exist stably during the subsequent memory operations. N{sub 2} molecules are considered to play as growth-retarding agents as demonstrated with memory operations of N-doped Sb{sub 70}Te{sub 30}.

36 MATERIALS SCIENCE↗