Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A temporal/spectral analysis of small grain crops and confusion crops

Spectral data from the LANDSAT-2 satellite were used to study the growth cycles of fields of wheat, barley, alfalfa, corn, sunflowers, soybeans, rye, flax, oats, millet, grass, and hay. Signatures of pastures, trees, and idle fallow were also studied. The growth cycles were portrayed in the form of temporal plots of the greeness-brightness transformation vector applied to average channel pixel values within the fields, all of which were in three counties in North Dakota. The plots of each crop reveal characteristics which can be used in crop classification procedures.

Johnson, W. R.↗
NASA NTRS1981

Straight and chopped dc performance data for a General Electric 5BT 2366C10 motor and an EV-1 controller

Performance data on the General Electric 5BT 2366C10 series wound dc motor and EV-1 Chopper Controller is supplied for the electric vehicle manufacturer. Data is provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing shows the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 86% and 87%, regardless of temperature or mode of operation. When the chopper is utilized, maximum motor efficiency occurs when the chopper duty cycle approaches 100%.

Edie, P. C.↗
NASA NTRS1981

Straight and chopped dc performance data for a Prestolite MTC-4001 motor and a general electric EV-1 controller

Performance data on the Prestolite MTC-4001 series wound dc motor and General Electric EV-1 Chopper Controller is supplied for the electric vehicle manufacturer. Data are provided for both straight and chopped dc input to the motor, at 2 motor temperature levels. Testing was done at 6 voltage increments to the motor, and 2 voltage increments to the controller. Data results are presented in both tabular and graphical forms. Tabular information includes motor voltage and current input data, motor speed and torque output data, power data and temperature data. Graphical information includes torque-speed, motor power output-speed, torque-current, and efficiency-speed plots under the various operating conditions. The data resulting from this testing show the speed-torque plots to have the most variance with operating temperature. The maximum motor efficiency is between 76% and 82%, regardless of temperature or mode of operation.

Edie, P. C.↗
NASA NTRS1981

Analysis of starvation effects on hydrodynamic lubrication in nonconforming contacts

Numerical methods were used to determine the effects of lubricant starvation on the minimum film thickness under conditions of a hydrodynamic point contact. Starvation was effected by varying the fluid inlet level. The Reynolds boundary conditions were applied at the cavitation boundary and zero pressure was stipulated at the meniscus or inlet boundary. A minimum-fill-thickness equation as a function of both the ratio of dimensionless load to dimensionless speed and inlet supply level was determined. By comparing the film generated under the starved inlet condition with the film generated from the fully flooded inlet, an expression for the film reduction factor was obtained. Based on this factor a starvation threshold was defined as well as a critically starved inlet. The changes in the inlet pressure buildup due to changing the available lubricant supply are presented in the form of three dimensional isometric plots and also in the form of contour plots.

Brewe, D. E.↗
NASA NTRS1981

Metallic minerals, thermal histories and parent bodies of some xenolithic, ordinary chondrite meteorites

The metal grains were investigated in the hosts and lithic fragments of various petrologic types in four xenolithic chondrites using reflected-light microscopy and electron-probe analysis. The kamacite, taenite, tetrataenite, and troilite in Weston and Fayetteville have many textures; on a Wood plot of the central Ni content vs dimensions, the taenite content shows scatter if metal grains had cooled at rates of 10-1000 and 1-100 K/Myr through 700 K. In contrast, metallic minerals in Bhola and Mezo-Madaras have uniform textures and plot coherently, indicating cooling rates of 0.1 and 1 K/Myr, respectively, in the 700-600 K range. It is concluded that the host and xenoliths in these chondrites were cooled slowly after compaction; their clasts underwent peak metamorphic temperatures and slow cooling through 700 K in different environments.

Scott, E. R. D.↗
NASA NTRS1981

The formation and growth of sulfate aerosols in the stratosphere

The critical compositions, critical radii, and nucleation rates of sulfuric acid droplets formed through homogeneous heteromolecular nucleation process in the stratosphere under a variety of ambient conditions are calculated. Results are plotted as a function of H2SO4 concentration and H2O concentration so that characteristics of sulfate aerosols can be quickly estimated whenever environmental conditions are known. The effect of the uncertainty in the saturated vapor pressure of H2SO4 on the estimated properties of sulfate aerosols is elucidated. Plottings are presented that illustrate the relative importance of new particle formation by homogeneous nucleation vs growth by heteromolecular condensation on pre-existing nuclei in the stratosphere. The effects of ambient conditions, such as the concentrations of H2SO4 and H2O, the average stratospheric particle radius, and the number concentration of pre-existing nuclei on the relative importance of these two competing processes are discussed.

Yue, G. K.↗
NASA NTRS1981

Crop identification and leaf area index calculations with Landsat multitemporal data

Formulas are given to convert land-based vegetative canopy spectral reflectance measurements into Landsat digital counts in the four channels for a clear standard atmosphere. These formulas are shown to predict the curves found by plotting multitemporal Landsat trajectories. With correct interpretation, plots of channel 3 versus channel 4 Landsat data for crops are shown to yield information on both crop identification and crop leaf area index.

Chance, J. E.↗
NASA NTRS1981

Deconvolution of wide field-of-view radiometer measurements of earth-emitted radiation. II - Analysis of first year of Nimbus 6 ERB data

The theory of deconvolution considered by Smith and Green (1981) is applied to Nimbus 6 data in order to interpret the data with the maximum obtainable resolution. Attention is given to the data sample, sun-contaminated measurements, the measurement model, the deconvolution, the degree variance, the spherical harmonic coefficients, the geographical distribution of longwave radiation, time histories of zonal coefficients, and the effect of a grid system. Degree variance plots for 12 months of longwave radiation data show that the limit for a spherical harmonic representation of the Nimbus 6 wide field-of-view longwave data is 12th degree. The degree variance plots also reveal that most of the power is in the lower degree terms. Contour maps of the radiation field show the geographical distribution of earth emitted radiant exitance for each month.

Bess, T. D.↗
NASA NTRS1981

Velocity-space synthesis of ISEE-1 measurements of the three dimensional electron distribution function

A computer package which produces contour plots of the three dimensional electron distribution function measured by an electron spectrometer aboard ISEE-1 is described. Examples of the contour plots and an explanation of how to use the program, including the necessary computer code for running the program on the GSFC 360/91 computer is presented. The method by which the discrete measurements of the distribution function, given by points on the four dimensional surface are synthesized into a smooth surface in a three dimensional space which can be contoured is described. The velocity components are parallel and perpendicular to the magnetic field, respectively, in the proper frame of the electrons.

Fitzenreiter, R. J.↗
NASA NTRS1980

Consolidation of data base for Army generalized missile model

Data from plume interaction tests, nose mounted canard configuration tests, and high angle of attack tests on the Army Generalized Missile model are consolidated in a computer program which makes them readily accessible for plotting, listing, and evaluation. The program is written in FORTRAN and will run on an ordinary minicomputer. It has the capability of retrieving any coefficient from the existing DATAMAN tapes and displaying it in tabular or plotted form. Comparisons of data taken in several wind tunnels and of data with the predictions of Program MISSILE2 are also presented.

Klenke, D. J.↗
NASA NTRS1981

Atlas of absorption lines from 0 to 17 900 cm(-1)

Plots of absorption line strength versus line position for wavenumbers from 0 to 17,900 cm(-1) are shown for 20 atmospheric gases (H2O, CO2, O3, N2O, CO, CH4, O2, NO, SO2, NO2, NH3, HNO3, OH, HF, HCl, HBr, HI, ClO, OCS, H2CO). Also shown are similar plots of lower-state energy values for adsorption lines for the strongly adsorbing atmospheric gases (H2O, CO2, O3, and CH4) for wavenumbers from 0 to 5000 cm(-1).

Park, J. H.↗
NASA NTRS1982

Tolerance analysis of optical telescopes using coherent addition of wavefront errors

A near diffraction-limited telescope requires that tolerance analysis be done on the basis of system wavefront error. One method of analyzing the wavefront error is to represent the wavefront error function in terms of its Zernike polynomial expansion. A Ramsey-Korsch ray trace package, a computer program that simulates the tracing of rays through an optical telescope system, was expanded to include the Zernike polynomial expansion up through the fifth-order spherical term. An option to determine a 3 dimensional plot of the wavefront error function was also included in the Ramsey-Korsch package. Several assimulation runs were analyzed to determine the particular set of coefficients in the Zernike expansion that are effected by various errors such as tilt, decenter and despace. A 3 dimensional plot of each error up through the fifth-order spherical term was also included in the study. Tolerance analysis data are presented.

Davenport, J. W.↗
NASA NTRS1981

Investigations of medium wavelength magnetic anomalies in the Eastern Pacific using Magsat data

Processing continued on the data set covering the first three months of the mission. Orbits were selected over a specified range of longitude and latitude and those orbits falling within the geographical boundaries were stored on a disk and a listing made. To verify the quality of the data, plots were made showing altitude vs latitude, anomalous field vs latitude, and corrected anomalous field vs latitude. Results of the plotting showed that: (1) data from the first day of the mission are not usable because they are too noisy; (2) some orbits contain spikes, no doubt a processing error on the tape; (3) some orbits contain a 20 deg region in latitude, offset roughly 30 nT from the rest of the anomalous field profiles; and (4) the correlation between the adjacent orbits is poor. Even the new ring current coefficients provided with a later, corrected set of data tapes did not not yield the desired correlations.

Harrison, C. G. A.↗
NASA NTRS1982

User's guide to noise data acquisition and analysis programs for HP9845: Nicolet analyzers

A software interface package was written for use with a desktop computer and two models of single channel Fast Fourier analyzers. This software features a portable measurement and analysis system with several options. Two types of interface hardware can alternately be used in conjunction with the software. Either an IEEE-488 Bus interface or a 16-bit parallel system may be used. Two types of storage medium, either tape cartridge or floppy disc can be used with the software. Five types of data may be stored, plotted, and/or printed. The data types include time histories, narrow band power spectra, and narrow band, one-third octave band, or octave band sound pressure level. The data acquisition programming includes a front panel remote control option for the FFT analyzers. Data analysis options include choice of line type and pen color for plotting.

Mcgary, M. C.↗
NASA NTRS1982

Application of a computerized vibroacoustic data bank for random vibration criteria development

A computerized data bank system was developed for utilization of large amounts of vibration and acoustic data to formulate component random vibration design and test criteria. This system consists of a computer, graphics tablets, and a dry silver hard copier which are all desk top type hardware and occupy minimal space. Currently, the data bank contains data from the Saturn 5 and Titan 3 flight and static test programs. The vibration and acoustic data are stored in the form of power spectral density and one third octave band plots over the frequency range from 20 to 2000 Hz. The data were stored by digitizing each spectral plot by tracing with the graphics tablet. The digitized data were statistically analyzed, and the resulting 97.5 percent confidence levels were stored on tape along with the appropriate structural parameters. Standard extrapolation procedures were programmed for prediction of component random vibration test criteria for new launch vehicle and payload configurations. A user's manual is included to guide potential users through the programs.

Ferebee, R. C.↗
NASA NTRS1982

Geometry and starvation effects in hydrodynamic lubrication

Numerical methods were used to determine the effects of lubricant starvation on the minimum film thickness under conditions of a hydrodynamic point contact. Starvation was effected by varying the fluid inlet level. The Reynolds boundary conditions were applied at the cavitation boundary and zero pressure was stipulated at the meniscus or inlet boundary. A minimum-film-thickness equation as a function of both the ratio of dimensionless load to dimensionless speed and inlet supply level was determined. By comparing the film generated under the starved inlet condition with the film generated from the fully flooded inlet, an expression for the film reduction factor was obtained. Based on this factor a starvation threshold was defined as well as a critically starved inlet. The changes in the inlet pressure buildup due to changing the available lubricant supply are presented in the form of three dimensional isometric plots and also in the form of contour plots.

Brewe, D. E.↗
NASA NTRS1981

Studies of high latitude current systems using MAGSAT vector data

The magnetic disturbance fields caused by global external current systems are considered with particular emphasis on improving the understanding of the physical processes which control high latitude current systems. Following processing the MAGSAT data were routinely plotted in the Universal Time (UT) format as well as in a polar plot format. The H'D'U' coordinate system, was adopted as the standard for representing the MAGSAT residual magnetic field vectors. A data file was generated and the TPOLAR computer code was developed to determine from the orbital elements, the time, latitude, and MLT of the extremum latitude of each transpolar segment of orbit. The precision of the vector data set from MAGSAT prompted an extended exploratory phase for data analysis procedures, modeling techniques and phenomenology.

Burrows, J. R.↗
NASA NTRS1982

Evaluation of bearing mounting design and excessive wear phenomena

The effect of bearing thermal growth on the effectiveness of the bearing preload springs on the space shuttle main engine high pressure oxygen turbopump (SSME HPTOP) were examined. The SSME HPTOP turbine end bearings, preload spring, and bearing mounting design were evaluated relative to spalling, excessive ball wear, possible thermal problems, and cage delamination. The magnitude of the thermal stresses required to cause high levels of ball wear were calculated. Plots of maximum sheer stress and maximum reversing shear versus the axial load for the 57 mm SSME HPTOP bearing were created. A plot of the bearing thermal growth versus preload spring deflection was generated. It was determined that metallic wear, rather than thermal growth, caused enlargement of the contact zone between ball and races, that high fatigue-inducing shear stresses are generated under increased loads, and that at temperatures between 100 and 150 deg C, the springs bottom out and very high loads are developed in the bearing. Allowance for adequate spring movement after assembly is recommended.

Kannel, J. W.↗