Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

An extremely high dielectric constant in bismuth-based pyrochlore multilayer film capacitors combined with percolative structure

The percolative film capacitor structure of Pt/Bi{sub 2}Mg{sub 2/3}Nb{sub 4/3}O{sub 7}[BMN(Ar) films deposited at pure argon atmosphere]/Pt was addressed for achievement of a high dielectric constant in the films deposited at room temperature by radio frequency magnetron sputtering. The deterioration of the leakage current characteristics in the percolative capacitor was mitigated using the multilayer films of BMN(O)/BMN(Ar)/BMN(O), where ultrathin BMN(O) films were deposited at a mixed atmosphere of argon and oxygen. An extremely high dielectric constant of 120 and a low leakage current density of 6x10{sup -6} A/cm{sup 2} at 3 V were observed in percolative BMN multilayer films as-deposited at room temperature.

36 MATERIALS SCIENCE↗

Effect of solvent polarization on the reorganization energy of electron transfer from molecular dynamics simulations

The solvent contribution {lambda}{sub s} to the reorganization energy of electron transfer can be estimated from averages of the potential energy gaps between neutral-pair and ion-pair states over an ensemble of structures generated from molecular dynamics simulations. Invoking a Marcus-type two-sphere model for charge separation and recombination in an aqueous environment, we explored the effect of a polarizable force field and noted a strong reduction of {lambda}{sub s} (by {approx}45%) compared to the corresponding value obtained with a standard nonpolarizable force field. Both types of force fields yield {lambda}{sub s} values that in agreement with the Marcus theory, vary strictly linearly with the inverse of the donor-acceptor distance; the corresponding slopes translate into appropriate effective optical dielectric constants, {epsilon}{sub {infinity}}{approx_equal}1.0{+-}0.2 for a nonpolarizable and {epsilon}{sub {infinity}}{approx_equal}1.7{+-}0.4 for a polarizable force field. The reduction in the solvent reorganization energy due to a polarizable force field translates into a scaling factor that is essentially independent of the donor-acceptor distance. The corresponding effective optical dielectric constant, {epsilon}{sub {infinity}}{approx_equal}1.80, is in excellent agreement with experiment for water.

74 ATOMIC AND MOLECULAR PHYSICS↗

Synthesis and Characterization of Lead Free (Na{sub 0.5}K{sub 0.5}){sub NbO3} Ceramics

NKN (50/50) material was synthesized in single perovskite phase by solid state reaction technique. Existence of mixed phase by XRD analysis, confirmed the MPB nature of the system. Density and grain size were found to be 4.23gm/cm{sup 3} and {approx}5.5({mu}m, respectively. Room temperature value of dielectric constant ({epsilon}{sub r}) and dielectric loss (tan{delta}) at 1 kHz were found to be 425 and 0.004, respectively and the transition temperature (T{sub c}) was found to be {approx}390 deg. C. Development of P-E hystersis loop indicated the ferroelectric nature of the material.

36 MATERIALS SCIENCE↗

Dielectric response of multiwalled carbon nanotubes as a function of applied ac-electric fields

The complex dielectric constant ({epsilon}{sup *}) is reported for multiwalled carbon nanotubes (MWCNTs) up to 10{sup 5} Hz as a function of ac-electric field amplitudes E{sub rot} (in phase and same frequency as the measurement) and E{sub ac} (different phase and fixed frequency with respect to the measurement). A slow relaxation process (mode 1) is observed, which shifts to higher frequency with increasing E{sub rot} but is independent of E{sub ac}. A fast relaxation process (mode 2) is also observed, which is independent of E{sub rot} but shifts to higher frequency with increasing E{sub ac} (opposite to that of mode 1). An ac-conductivity analysis of MWCNT reveals insights on how E{sub rot} and E{sub ac} influence the dissipation.

36 MATERIALS SCIENCE↗

Dielectric and piezoelectric properties of Bi{sub 2}O{sub 3} added (Pb,Ca,Sr)(Ti,Mn,Sb)O{sub 3} ceramics sintered at low temperature

In this study, in order to develop low temperature sintering ceramics for a thickness mode multilayer piezoelectric transformer, (Pb,Ca,Sr)(Ti,Mn,Sb)O{sub 3} ceramics were fabricated using Na{sub 2}CO{sub 3}, Li{sub 2}CO{sub 3}, MnO{sub 2}, and Bi{sub 2}O{sub 3} as sintering aids at 870, 900, and 930 deg. C. Their respective dielectric and piezoelectric properties were investigated according to the amount of Bi{sub 2}O{sub 3} addition. At the sintering temperature of 900 deg. C, the optimum value was shown for the density of 6.94 g/cm{sup 3}, thickness vibration mode electromechanical coupling factor (henceforth, k{sub t}) of 0.497, thickness vibration mode mechanical quality factor (henceforth, Q{sub mt}) of 3162, and dielectric constant (henceforth, {epsilon}{sub r}) of 209 for thickness mode multilayer piezoelectric transformer application.

36 MATERIALS SCIENCE↗

Direct Measurement of Oxygen Incorporation into Thin Film Oxides at Room Temperature Upon Ultraviolet Phton Irradiation

Minute changes in oxygen concentration in complex oxides even of the order of ~0.001% can significantly influence functional properties ranging from onset of superconductivity to colossal dielectric constant and ferroic response. In this letter, we report on direct experimental measurement of enhanced oxygen incorporation into ultra-thin oxide films at room temperature under gentle UV photon exposure. Oxygen concentration changes in nanoscale yttria-doped-zirconia (YDZ) films grown on Ge substrate were quantified using the 16O(d,p)17O nuclear reaction. The oxygen concentration was consistently ~ 3 % larger in UV irradiated YDZ films compared to as-grown YDZ films and can be kinetically controlled. Possible incorporation mechanisms are discussed. This suggests a novel approach to modulate oxygen concentration in complex oxides. There is tremendous interest in the science and applications of ultra-thin oxide films, such as electrolyte membranes for solid oxide fuel cells 1, high-dielectric constant (high-κ) oxides for metal-oxide-semiconductor (MOS) devices 2 and multi-ferroics 3. In addition, thin film oxides also serve as model systems to investigate space charge effects on carrier transport and strongly correlated phenomena such as phase transitions. An overarching problem of central importance is the controlled synthesis of oxide films and how they impact functional properties. Particularly, the role of oxygen vacancies or non-stoichiometry has been found to be crucial in this regard. Examples include large magneto resistance effect and metal-to-insulator transition introduced by reducing oxygen stoichiometry of poly crystalline La 0.67 Ba 0.33 MnOz 3 , nonsuperconducting-to-superconducting transformation by minute amount of oxygen incorporation upon annealing YBa 2 Cu 3 O 7-δ (YBCO) films 4, and blue light emission at room temperature in oxygen deficient SrTiO 3 (STO) 5, 6. These studies revealed broad spectra of properties with subtle changes (e.g., of the order of ~0.01% to introduce semiconductor-to-metal transition in SrTiO 3 in oxygen-related defects, thereby it is extremely important to develop an understanding of oxygen concentration in thin films.

30 DIRECT ENERGY CONVERSION↗

Effect of bottom electrode on dielectric property of sputtered-(Ba,Sr)TiO{sub 3} films

(Ba{sub 0.5}Sr{sub 0.5})TiO{sub 3} (BST) films were deposited on (111)Pt/TiO{sub 2}/SiO{sub 2}/Al{sub 2}O{sub 3} substrates by rf sputtering. By inserting a thin layer of SrRuO{sub 3} in between BST film and (111)Pt electrode, the BST films grew fully (111)-oriented without any other orientations. In addition, it enables us to reduce the growth temperature of BST films while keeping the dielectric constant and tunability as high as those of BST films directly deposited on Pt at higher temperatures. The dielectric loss of the films on SrRuO{sub 3}-top substrates was comparable to that on Pt-top substrates for the same level of dielectric constant. The results suggest that the SrRuO{sub 3} thin layer on (111)Pt electrode is an effective approach to growing highly crystalline BST films with (111) orientation at lower deposition temperatures.

36 MATERIALS SCIENCE↗

Thickness-modulated optical dielectric constants and band alignments of HfO{sub x}N{sub y} gate dielectrics

Thickness-modulated optical dielectric constants and band alignments of HfO{sub x}N{sub y} films grown by sputtering have been investigated by spectroscopic ellipsometry (SE) and x-ray photoelectron spectroscopy. Based on SE measurements, it has been noted that an increase in optical dielectric constant and band gap has been observed as a function of the film thickness. Analyses of thickness-dependent band alignment of the HfO{sub x}N{sub y}/Si system indicate that the valence band offset increases, but only slight change in the conduction band offset, resulting from the thickness-induced change in the structure. The suitable optical dielectric constants and band offsets relative to Si make sputtering-derived HfO{sub x}N{sub y} film a promising candidate for high-k gate dielectrics.

36 MATERIALS SCIENCE↗

Enhanced dielectric response of GeO{sub 2}-doped CaCu{sub 3}Ti{sub 4}O{sub 12} ceramics

CaCu{sub 3}Ti{sub 4}O{sub 12} ceramic samples were prepared by solid state conventional route using stoichiometric amounts of CuO, TiO{sub 2}, and CaCO{sub 3}. Afterward the material was doped with GeO{sub 2} with concentrations up to 6% by weight and sintered at 1050 deg. C for 12 h. The influence of doping on the microstructure, vibrational modes, and dielectric properties of the material was investigated by x-ray diffraction, scanning electron microscopy coupled with an energy dispersive spectrometer, and infrared and dielectric measurements between 100 Hz and 30 MHz. The materials presented huge dielectric response, which increases with doping level relative to undoped CaCu{sub 3}Ti{sub 4}O{sub 12}. The main effect of doping on the microstructure is the segregation of Cu-rich phase in the ceramic grain boundaries. Cole-Cole modeling correlates well the effects of this segregation with the relaxation parameters obtained. The intrinsic phonon contributions for the dielectric response were obtained and discussed together with the structural evolution of the system.

36 MATERIALS SCIENCE↗

Morphotropic phase boundary and electrical properties of K{sub 1-x}Na{sub x}NbO{sub 3} lead-free ceramics

Lead-free K{sub 1-x}Na{sub x}NbO{sub 3} ceramics with x=0.48-0.54 were prepared by a conventional solid-state reaction method to investigate the influence of the K/Na ratio on phase structures and electrical properties. The results suggest that a typical morphotropic phase boundary exists at x=0.52-0.525, separating the monoclinic and orthorhombic phases. The sample with the composition near x=0.52 shows the maximum values of the piezoelectric constant (d{sub 33}=160 pC/N) and the electromechanical coupling coefficient (k{sub t}=47%). The results provide a helpful guidance to consider the optimal ratio of K to Na for designing and developing new (K,Na)NbO{sub 3}-based ceramics.

36 MATERIALS SCIENCE↗

Phase transitions and the temperature dependence of the dielectric properties in tetragonally strained barium strontium titanate films

The dielectric properties of sputter-deposited Ba{sub 1-x}Sr{sub x}TiO{sub 3} (BST) thin films on (001) MgO substrates with in-plane or out-of-plane tetragonal lattice structure distortions were characterized as a function of temperature. A temperature-dependent interpolation calibration technique was developed for increased efficiency of the microwave measurements. The BST films showed significant differences in the ferroelectric phase transition due to lattice distortions with a strong temperature dependence of the in-plane dielectric behavior for films under tensile strain and a weak temperature dependence for films under compressive strain. The experimental data agreed well with theoretical modeling of the BST film strain effect based on Devonshire's theory.

36 MATERIALS SCIENCE↗

Low temperature perovskite crystallization of highly tunable dielectric Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} thick films deposited by ion beam sputtering on platinized silicon substrates

Ba{sub 0.7}Sr{sub 0.3}TiO{sub 3} (BST) thick films with thickness up to 1 {mu}m were deposited on Pt-coated silicon substrates by ion beam sputtering, followed by an annealing treatment. It is demonstrated that pure well-crystallized perovskite phase could be obtained in thick BST films by a low temperature process (535 deg. C). The BST thick films show highly tunable dielectric properties with tunability (at 800 kV/cm) up to 51.0% and 66.2%, respectively, for the 0.5 and 1 {mu}m thick films. The relationship between strains and dielectric properties was systematically investigated in the thick films. The results suggest that a comparatively larger tensile thermal in-plane strain (0.15%) leads to the degradation in dielectric properties of the 0.5 {mu}m thick film; besides, strong defect-related inhomogeneous strains ({approx}0.3%) make the dielectric peaks smearing and broadening in the thick films, which, however, preferably results in high figure-of-merit factors over a wide operating temperature range. Moreover, the leakage current behavior in the BST thick films was found to be dominated by the space-charge-limited-current mechanism, irrespective of the film thickness.

36 MATERIALS SCIENCE↗

A phenomenological thermodynamic potential for potassium niobate

A phenomenological thermodynamic potential in form of an eight-order polynomial of the Landau-Ginsburg-Devonshire (LGD) expansion has been determined for a bulk potassium niobate (KNbO3) single crystal. Such potential is tested by calculating the structural and ferroelectric properties including polarizations, dielectric constants, lattice constants, and phase transition temperatures as well as their shifts under the hydrostatic pressure. The fitted LGD energy expansion coefficients can be used in the phase-field model to explain and predict ferroelectric properties of the bulk and thin film KNbO3.

36 MATERIALS SCIENCE↗

Phase coexistence and high electrical properties in (K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} piezoelectric ceramics

(K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} lead-free piezoelectric ceramics were produced by conventional solid-state reaction method. The effects of K/Na ratio on the phase transitional behavior, Raman spectrum, microstructure, and dielectric, piezoelectric, and ferroelectric properties of the ceramics have been investigated. The phase structure of the ceramics undergoes a transition from orthorhombic to tetragonal phase with increasing x. A double-degenerate symmetric O-Nb-O stretching vibration v{sub 1} and a triply degenerate symmetric O-Nb-O bending vibration v{sub 5} are detected as relatively strong scattering in the Raman spectra. The peak shifts of v{sub 5} and v{sub 1} modes all have a discontinuity with x between 0.42 and 0.46, which may suggest the coexistence of orthorhombic and tetragonal phases in this range. Properly modifying x reduces the sintering temperature, promotes the grain growth behavior, and improves the density of the ceramics. The polymorphic phase transition (at T{sub o-t}) is shifted to near room temperature by increasing x to 0.44 (K/Na ratio of about 0.85:1), and the coexistence of orthorhombic and tetragonal phases in the ceramics at x=0.44 results in the optimized electrical properties (d{sub 33}=291 pC/N, k{sub p}=0.54, {epsilon}{sub r}=1167, tan {delta}=0.018, T{sub o-t}=35 deg. C, T{sub C}=351 deg. C, P{sub r}=27.65 {mu}C/cm{sup 2}, and E{sub c}=8.63 kV/cm). The results show that the equal K/Na ratio is not an essential condition in obtaining optimized electrical properties in (K{sub x}Na{sub 0.96-x}Li{sub 0.04})(Nb{sub 0.85}Ta{sub 0.15})O{sub 3} ceramics.

36 MATERIALS SCIENCE↗

Effects of Eu substituting positions and concentrations on luminescent, dielectric, and magnetic properties of SrTiO{sub 3} ceramics

The structural, luminescent, dielectric, and magnetic properties of multifunction Eu{sup 3+}-doped SrTiO{sub 3} (STO) ceramics were investigated at room temperature. Three different charge compensation mechanisms were realized by substituting Eu ion at different sites. It was found that the multifunction properties of the samples strongly depended on the substituting positions of Eu ion. Compared with Eu substitution at Sr or Ti site samples, the photoluminescence intensities and dielectric constant of both Sr and Ti sites substituted samples were obviously enhanced, mainly ascribed to the small lattice distortion and unique charge compensation mechanism. A linear magnetization-magnetic field behavior revealed the paramagnetic nature of the Eu{sup 3+} doped STO and was sensitive to the Eu doping concentrations.

36 MATERIALS SCIENCE↗

Ultralow dielectric losses in pyrochlore films of the PbO-MgO-Nb{sub 2}O{sub 5}-TiO{sub 2} system

(1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} (PMNT) (with x=0.1) thin films were prepared on Pt-coated silicon substrates by radio-frequency magnetron sputtering and postdeposition annealing method. A well-crystallized pyrochlore phase structure, which started to nucleate and grow at 450-500 deg. C, was formed in the PMNT thin films. These pyrochlore-structured PMNT thin films show ultralow dielectric losses with a typical loss tangent as low as 0.001, accompanied by a relatively high dielectric constant ({epsilon}{sub r}=176). Such an extremely low dielectric loss, having never been obtained in thin films of perovskite PMNT, is probably ascribed to the specific structural feature of pyrochlore phase, chemically different from its perovskite counterpart, and ascribed to the avoidance of the polar domain-related losses.

36 MATERIALS SCIENCE↗

Effect of orthorhombic distortion on dielectric and piezoelectric properties of CaBi{sub 4}Ti{sub 4}O{sub 15} ceramics

High temperature bismuth layered piezoelectric and ferroelectric ceramics of CaBi{sub 4}Ti{sub 4}O{sub 15} (CBT) have been prepared using the solid state route. The formation of single phase material with orthorhombic structure was verified from x-ray diffraction and Raman spectroscopy. The orthorhombic distortion present in the CBT ceramic sintered at 1200 deg. C was found to be maximum. A sharp phase transition from ferroelectric to paraelectric was observed in the temperature dependent dielectric studies of all CBT ceramics. The Curie's temperature (T{sub c}=790 deg. C) was found to be independent of measured frequency. The behavior of ac conductivity as a function of frequency (100 Hz-1 MHz) at low temperatures (<500 deg. C) follows the power law and is attributed to hopping conduction. The presence of large orthorhombic distortion in the CBT ceramic sintered at 1200 deg. C results in high dielectric constant, low dielectric loss, and high piezoelectric coefficient (d{sub 33}). The observed results indicate the important role of orthorhombic distortion in determining the improved property of multicomponent ferroelectric material.

36 MATERIALS SCIENCE↗

Electron transport properties of irradiated polyimide thin films in single track regime

We have prepared a suite of polyimide thin films containing spatially separated one-dimensional conductive-nanowires by ion-beam irradiation exhibiting temperature dependent electrical resistance consistent with thermally activated electron hopping with activation energies about 1 eV arising from localized states spatially distributed along the ion tracks. Dielectric measurements showed the formation of high dielectric constant interphase regions surrounding each ion track generated during the irradiation process, responsible for space-charge accumulation which influences electron transport within the ion tracks. This behavior suggests a role for space-charge effects and dielectric properties in this interphase region in the control of electron transport within single track nanowires.

36 MATERIALS SCIENCE↗