Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanostructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials

Abstract Sodium‐ion technology has the potential to become the next generation of low cost and environmentally friendly electrochemical energy storage system for grid‐level applications. The low cost and abundant raw materials employed in sodium cells have driven the recent increasing interest in sodium‐ion batteries (SIBs), which appear especially appealing, since manufacturers can use the already existing production technology of lithium‐ion batteries. However, SIBs are still an early stage technology, which requires several issues affecting cell performance to be addressed. Despite the accelerated development of cathode materials, anode materials still require further investigation and optimization to reach high energy density performance. In the pursuit of high capacity anode materials, several alloying‐, conversion‐, and combined conversion–alloying‐based electrodes have been investigated. This review offers a comprehensive overview on the recent progresses toward the realization of “beyond‐insertion” anode materials. The role of nanostructuration with the associated advantages and disadvantages is presented for each class of compounds, combined with the main strategies adopted to improve the electrochemical behavior. Finally, an overview of the challenges and perspectives associated with the development of the next generation of anode materials is presented with a particular focus on the role of the electrolyte solutions and solid/electrolyte interphase.

Zhang, Huang↗

Surface-Plasmon-Assisted Photoelectrochemical Reduction of CO 2 and NO 3 – on Nanostructured Silver Electrodes

Electrochemical reduction of carbon dioxide (CO 2 ) typically suffers from low selectivity and poor reaction rates that necessitate high overpotentials, which impede its possible application for CO 2 capture, sequestration, or carbon-based fuel production. New strategies to address these issues include the utilization of photoexcited charge carriers to overcome activation barriers for reactions that produce desirable products. Here, this study demonstrates surface-plasmon-enhanced photoelectrochemical reduction of CO 2 and nitrate (NO 3 - ) on silver nanostructured electrodes. The observed photocurrent likely originates from a resonant charge transfer between the photogenerated plasmonic hot electrons and the lowest unoccupied molecular orbital (MO) acceptor energy levels of adsorbed CO 2 , NO 3 - , or their reductive intermediates. The observed differences in the resonant effects at the Ag electrode with respect to electrode potential and photon energy for CO 2 versus NO 3 - reduction suggest that plasmonic hot-carriers interact selectively with specific MO acceptor energy levels of adsorbed surface species such as CO 2 , NO 3 - , or their reductive intermediates. This unique plasmon-assisted charge generation and transfer mechanism can be used to increase yield, efficiency, and selectivity of various photoelectrochemical processes.

36 MATERIALS SCIENCE↗

Manipulating Band Structure through Reconstruction of Binary Metal Sulfide for High‐Performance Thermoelectrics in Solution‐Synthesized Nanostructured Bi 13 S 18 I 2

Abstract Reconstructing canonical binary compounds by inserting a third agent can significantly modify their electronic and phonon structures. Therefore, it has inspired the semiconductor communities in various fields. Introducing this paradigm will potentially revolutionize thermoelectrics as well. Using a solution synthesis, Bi 2 S 3 was rebuilt by adding disordered Bi and weakly bonded I. These new structural motifs and the altered crystal symmetry induce prominent changes in electrical and thermal transport, resulting in a great enhancement of the figure of merit. The as‐obtained nanostructured Bi 13 S 18 I 2 is the first non‐toxic, cost‐efficient, and solution‐processable n‐type material with z T =1.0.

Xu, Biao↗

Auxetic Two‐Dimensional Nanostructures from DNA**

Abstract Architectured materials exhibit negative Poisson's ratios and enhanced mechanical properties compared with regular materials. Their auxetic behaviors emerge from periodic cellular structures regardless of the materials used. The majority of such metamaterials are constructed by top‐down approaches and macroscopic with unit cells of microns or larger. There are also molecular auxetics including natural crystals which are not designable. There is a gap from few nanometers to microns, which may be filled by biomolecular self‐assembly. Herein, we demonstrate two‐dimensional auxetic nanostructures using DNA origami. Structural reconfigurations are performed by two‐step DNA reactions and complemented by mechanical deformation studies using molecular dynamics simulations. We find that the auxetic behaviors are mostly defined by geometrical designs, yet the properties of the materials also play an important role. From elasticity theory, we introduce design principles for auxetic DNA metamaterials.

Li, Ruixin↗

Stable Thermotropic 3D and 2D Double Gyroid Nanostructures with Sub-2-nm Feature Size from Scalable Sugar–Polyolefin Conjugates

In this study, ultra-low molecular weight disaccharide–polyolefin conjugates with cellobiose, lactose and maltose head groups and atactic polypropene tails, such as 1, undergo a series of irreversible thermotropic order–order transitions with increasing temperature to provide nanostructured phases in the sequence: lamellar (L), hexagonal perforated lamellar (HPL), double gyroid (DG) and hexagonal cylindrical (C). The DG phase displays exceptional stability at ambient temperature and features two interpenetrating sugar domain networks having a sub-2-nm strut width and a lattice parameter, a DG , of 13.1 nm. The unique stability of this DG phase extends further within ultrathin films all the way down to the two-dimensional limit of 15 nm in which film thickness, l, is now less than the surface-oriented unit cell height, h DG . In addition to raising the fundamental question of what minimally constitutes a Schoen triply periodic minimal surface and DG lattice, these results serve to establish the class of sugar–polyolefin conjugates as a new material platform for nanoscience and nanotechnology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tubular Nanostructures from Large‐Pore 2D Covalent Organic Frameworks

Abstract The synthesis of a wavy mesoporous 2D covalent organic framework (COF) with a 6‐nm hexagonal pore lattice ( Joa‐COF‐1 ) is reported. This has been achieved by the synthesis of a terpyrenyl linker of approximately 2.7 nm in length and its subsequent condensation with a 3‐connected non‐planar cata‐hexabenzocoronene. Joa‐COF‐1 exists as non‐covalent tubular domains composed of π‐stacked 4 to 5 pores in 2D COF sections that can be separated by mild sonication, resulting in a family of tubular COF nanostructures that combine a 1D morphology with accessible mesopores.

Almarza, Joaquín [POLYMAT University of the Basque↗

Nanostructured Cobalt Oxide Clusters in Mesoporous Silica as Efficient Oxygen-Evolving Catalysts

The development of integrated artificial photosynthetic systems for the direct conversion of carbon dioxide and water to fuel depends on the availability of efficient and robust catalysts for the chemical transformations. Catalysts need to exhibit turnover frequency (TOF) and density (hence size) commensurate with the solar flux at ground level (1000Wm2, airmass (AM) 1.5)[1]to avoid wasting of incidentsolar photons. For example, a catalyst with a TOF of 100 s1 requires a density of one catalytic site per square nanometer. Catalysts with lower rates or taking up a larger space will require a high-surface-area, nanostructured support that affords tens to hundreds of catalytic sites per square nanometer. Furthermore, catalysts need to operate close to the thermodynamic potential of the redox reaction so that amaximum fraction of the solar photon energy is converted to chemical energy. Stability considerations favor all-inorganic oxide materials, as does avoidance of harsh reaction conditions of pH value or temperature.

10 SYNTHETIC FUELS↗

Using Ambient Ion Beams to Write Nanostructured Patterns for Surface Enhanced Raman Spectroscopy

Electrolytic spray deposition was used to pattern surfaces with 2D metallic nanostructures. Spots that contain silver nanoparticles (AgNP) were created by landing solvated silver ions at desired locations using electrically floated masks to focus the metal ions to an area as little as 20 mm in diameter. The AgNPs formed are unprotected and their aggregates can be used for surface-enhanced Raman spectroscopy (SERS). The morphology and SERS activity of the NP structures were controlled by the surface coverage of landed silver ions. The NP structures created could be used as substrates onto which SERS samples were deposited or prepared directly on top of predeposited samples of interest. The evenly distributed hot spots in the micron-sized aggregates had an average SERS enhancement factor of 108. The surfaces showed SERS activity when using lasers of different wavelengths (532, 633, and 785 nm) and were stable in air.

Environmental Molecular Sciences Laboratory↗

Auxetic Two-Dimensional Nanostructures from DNA

Architectured materials exhibit negative Poisson's ratios and enhanced mechanical properties compared with regular materials. Their auxetic behaviors emerge from periodic cellular structures regardless of the materials used. The majority of such metamaterials are constructed by top-down approaches and macroscopic with unit cells of microns or larger. There are also molecular auxetics including natural crystals which are not designable. There is a gap from few nanometers to microns, which may be filled by biomolecular self-assembly. In this work, we demonstrate two-dimensional auxetic nanostructures using DNA origami. Structural reconfigurations are performed by two-step DNA reactions and complemented by mechanical deformation studies using molecular dynamics simulations. We find that the auxetic behaviors are mostly defined by geometrical designs, yet the properties of the materials also play an important role. From elasticity theory, we introduce design principles for auxetic DNA metamaterials.

59 BASIC BIOLOGICAL SCIENCES↗

Stable Thermotropic 3D and 2D Double Gyroid Nanostructures with Sub‐2‐nm Feature Size from Scalable Sugar–Polyolefin Conjugates

Abstract Ultra‐low molecular weight disaccharide–polyolefin conjugates with cellobiose, lactose and maltose head groups and atactic polypropene tails, such as 1 , undergo a series of irreversible thermotropic order–order transitions with increasing temperature to provide nanostructured phases in the sequence: lamellar ( L ), hexagonal perforated lamellar ( HPL ), double gyroid ( DG ) and hexagonal cylindrical ( C ). The DG phase displays exceptional stability at ambient temperature and features two interpenetrating sugar domain networks having a sub‐2‐nm strut width and a lattice parameter, a DG , of 13.1 nm. The unique stability of this DG phase extends further within ultrathin films all the way down to the two‐dimensional limit of 15 nm in which film thickness, l , is now less than the surface‐oriented unit cell height, h DG . In addition to raising the fundamental question of what minimally constitutes a Schoen triply periodic minimal surface and DG lattice, these results serve to establish the class of sugar–polyolefin conjugates as a new material platform for nanoscience and nanotechnology.

Nowak, Samantha R.↗

Tubular Nanostructures from Large‐Pore 2D Covalent Organic Frameworks

Abstract The synthesis of a wavy mesoporous 2D covalent organic framework (COF) with a 6‐nm hexagonal pore lattice ( Joa‐COF‐1 ) is reported. This has been achieved by the synthesis of a terpyrenyl linker of approximately 2.7 nm in length and its subsequent condensation with a 3‐connected non‐planar cata‐hexabenzocoronene. Joa‐COF‐1 exists as non‐covalent tubular domains composed of π‐stacked 4 to 5 pores in 2D COF sections that can be separated by mild sonication, resulting in a family of tubular COF nanostructures that combine a 1D morphology with accessible mesopores.

Almarza, Joaquín [POLYMAT University of the Basque↗

Enhancement in Oxygen Reduction Reaction Activity of Nitrogen-Doped Carbon Nanostructures in Acidic Media through Chloride-Ion Exposure

Nitrogen-doped carbon nanostructures (CNx) are promising cathode materials as catalysts for the oxygen reduction reaction (ORR) in polymer electrolyte membrane (PEM) fuel cells. Incorporation of chlorine into CN x catalysts using a facile methodology can lead to a significant improvement in the ORR activity in acidic media, as confirmed by electrochemical half-cell measurements. The chlorine-containing CN x catalyst (CN x -Cl) is synthesized by soaking CN x powder in 0.3 M HCl. The analysis of near-edge X-ray absorption fine structure spectra collected in the C K-edge region and Fourier-transform infrared spectra confirm the formation of C-Cl bonds in CN x -Cl. X-ray photoelectron spectroscopy (XPS) results reveal the presence of three distinct chlorine species in the CN x -Cl sample: (i) organic chlorine (C-Cl), (ii) anionic chloride in the positively charged environment of a pyridinium ring (N + Cl - ), and (iii) physisorbed ionic chloride. Results from temperature-programmed desorption studies under inert atmosphere corroborate the conclusions from XPS depth profiling analysis. The improvement in ORR activity after exposure of the CN x catalyst to chloride anions can be attributed to the creation of C-Cl functionalities as additional active sites. The difference in the electronegativity of C and Cl atoms results in a net positive charge on adjacent carbon sites, leading to the side-on adsorption of oxygen molecules and breakage of the O-O bond during ORR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser-Induced Self-Assembled Nanostructures on Electron-Transparent Substrates

Currently, one of the challenges in high-resolution transmission electron microscopy (TEM) studies of nanomaterials is to make contamination-free materials in a simple and time-efficient way. We demonstrate a method that combines nanosecond-pulsed laser dewetting of thin films with a film float-off technique to realize nanostructures (NSs) on electron-transparent substrates in a robust and rapid manner. NSs of metal (Ag) and bimetals (AgCo, AuCo) ranging from 20 to 150 nm are synthesized on thin carbon film deposited on mica substrates. The NS/carbon system is subsequently transferred onto TEM grids by a float-off process resulting from debonding of the carbon from mica due to their contrasting hydrophobic nature. Our process enables the fabrication of different NSs on flexible and electron-transparent substrates.

36 MATERIALS SCIENCE↗

Creation of Multi-Principal Element Alloy NiCoCr Nanostructures via Nanosecond Laser-Induced Dewetting

The multi-principal element alloy nanoparticles (MPEA NPs), a new class of nanomaterials, present a highly rewarding opportunity to explore new or vastly different functional properties than the traditional mono/bi/multimetallic nanostructures due to their unique characteristics of atomic-level homogeneous mixing of constituent elements in the nanoconfinements. Here, in this paper, the successful creation of NiCoCr nanoparticles, a well-known MPEA system is reported, using ultrafast nanosecond laser-induced dewetting of alloy thin films. Nanoparticle formation occurs by spontaneously breaking the energetically unstable thin films in a melt state under laser-induced hydrodynamic instability and subsequently accumulating in a droplet shape via surface energy minimization. While NiCoCr alloy shows a stark contrast in physical properties compared to individual metallic constituents, i.e., Ni, Co, and Cr, yet the transient nature of the laser-driven process facilitates a homogeneous distribution of the constituents (Ni, Co, and Cr) in the nanoparticles. Using high-resolution chemical analysis and scanning nanodiffraction, the environmental stability and grain arrangement in the nanoparticles are further investigated. Thermal transport simulations reveal that the ultrashort (≈100 ns) melt-state lifetime of NiCoCr during the dewetting event helps retain the constituent elements in a single-phase solid solution with homogenous distribution and opens the pathway to create the unique MPEA nanoparticles with laser-induced dewetting process.

36 MATERIALS SCIENCE↗

Scalable economic extracellular synthesis of CdS nanostructured particles by a non-pathogenic thermophile

We report microbially facilitated synthesis of cadmium sulfide (CdS) nanostructured particles (NP) using anaerobic, metal-reducing Thermoanaerobacter sp. The extracellular CdS crystallites were <10 nm in size with yields of ~3 g/L of growth medium/month with demonstrated reproducibility and scalability up to 24 L. During synthesis, Thermoanaerobacter cultures reduced thiosulfate and sulfite salts to H2S, which reacted with Cd2+ cations to produce thermodynamically favored NP in a single step at 65oC with catalytic nucleation on the cell surfaces. Photoluminescence (PL) analysis of dry CdS NP revealed an exciton-dominated PL peak at 440 nm, having a narrow full width at half maximum of 10 nm. A PL spectrum of CdS NP produced by dissimilatory sulfur reducing bacteria was dominated by features associated with radiative exciton relaxation at the surface. High reproducibility of CdS NP PL features important for scale-up conditions was confirmed from test tubes to 24L batches at a small fraction of the manufacturing cost associated with conventional inorganic NP production processes.

Moon, Ji Won↗

Photoluminescence of Gallium Phosphide-Based Nanostructures with Germanium Quantum Dots, Grown by Liquid-Phase Epitaxy

We have used liquid-phase epitaxy with pulsed substrate cooling using two structural designs to grow samples of nanoheteroepitaxial structures with Ge quantum dots in a GaP matrix on Si substrates. We have measured the photoluminescence spectra of the samples at temperatures of 77 K and 300 K with excitation by laser emission at λ = 4880 Å and 5145 Å. We draw conclusions concerning the factors influencing the spectrum and intensity of emission for nanostructures with quantum dots. It was found that in order to reduce nonradiative recombination in multilayer p–n structures, we need to create quantum dot arrays inside p and n regions rather than in the central portion of the depletion layer of the p–n junction. We show that the theoretical energies for Ge quantum dots of the calculated sizes are comparable with the energies of their photoluminescence maxima.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

ON MEASUREMENT OF CARBON CONTENT IN RETAINED AUSTENITE IN A NANOSTRUCTURED BAINITIC STEEL

In this study, the carbon content of retained austenite in a nanostructured bainitic steel was measured by atom probe tomography and compared with data derived from the austenite lattice parameter determined by X-ray diffraction. The results provide new evidence about the heterogeneous distribution of carbon in austenite, a fundamental issue controlling ductility in this type of microstructure.

36 MATERIALS SCIENCE↗