Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Electronic structure, magnetic properties, and mechanism of the insulator-metal transition in LaCoO{sub 3} taking into account strong electron correlations

The electronic structure of LaCoO{sub 3} at finite temperatures is calculated using the LDA+GTB method taking into account strong electron correlations and possible spin crossover upon an increase in temperature. Gap states revealed in the energy spectrum of LaCoO{sub 3} reduce the dielectric gap width upon heating; this allowed us to describe the insulator-metal transition observed in this compound at T = 500-600 K. The temperature dependence of the magnetic susceptibility with a peak at T Almost-Equal-To 100 K is explained by the Curie contribution from thermally excited energy levels of the Co{sup 3+} ion. At high temperatures, the Pauli contribution from a band electron is added and the total magnetization of LaCoO{sub 3} is considered as the sum M{sub tot} = M{sub loc} + M{sub band}. The second term describes the band contribution appearing as a result of the insulator-metal transition and facilitating the emergence of a high-temperature anomaly in the magnetic susceptibility of LaCoO{sub 3}.

36 MATERIALS SCIENCE↗

Effects of Heat Treatment on the Magnetic Properties of Polymer-Bound Iron Particle Cores

Spherical iron particles of three different size distributions, 6-10 micrometers in diameter, 100 mesh and 30-80 mesh, were mixed with 2.0 wt % of soluble imide and compression molded at 300 C under 131 MPa. Post-fabrication heat treatments were performed at 960 C for 6 h resulting in a significant enhancement of the permeability in low field region for all the specimens except for the one made of 30-80 mesh particles. The rate of core loss of these specimens at a magnetic induction of 5 kG measured up to 1 kHz shows a noticeable. increase after heat treatment which, along with the permeability enhancement, can be explained by the coalescence of particles forming a network of conductivity paths in the specimens. ne scanning electron micrographs taken for the 6-10 micrometer particle specimens show no evidence of heat treatment-induced grain growth. The untreated specimens show a very weak f(sup 2) -dependence of the core loss which clearly indicates a negligible contribution from the eddy current loss. In particular, an almost perfect linearity was found in the frequency dependence of the core loss of the untreated specimen made of 100 mesh iron particles.

Namkung, M.↗

Anomalous Composition-Induced Crossover in the Magnetic Properties of the Itinerant-Electron Antiferromagnet Ca 1 - x Sr x Co 2 - y As 2

We report the inference of Ying et al. [Europhys. Lett. 104, 67005 (2013)] of a composition-induced change from c-axis ordered-moment alignment in a collinear A-type antiferromagnetic (AFM) structure at small x to ab-plane alignment in an unknown AFM structure at larger x in Ca 1-x Sr x Co 2-y As 2 with the body-centered tetragonal ThCr 2 Si 2 structure is confirmed. Our major finding is an anomalous magnetic behavior in the crossover region 0.2 ≲ x ≲ 0.3 between these two phases. Also, in this region the magnetic susceptibility vs temperature χ ab (T) measured with magnetic fields H applied in the ab plane exhibit typical AFM behaviors with cusps at the Néel temperatures of ~ 65 K, whereas χ c (T) and the low-temperature isothermal magnetization M c (H) with H aligned along the c axis exhibit extremely soft ferromagneticlike behaviors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Three new homochiral coordination polymers involving two three-dimensional structural architectures: Syntheses, structures and magnetic properties

The preparations and properties of three new homochiral three-dimensional (3D) coordination polymers, [M(D-cam)(pyz)(H{sub 2}O){sub 2}]{sub n} (M=Co (1) and Ni (2); D-H{sub 2}cam=(+) D-camphoric acid; pyz=pyrazine) and [Mn{sub 2}(D-cam){sub 2}(H{sub 2}O){sub 2}] (3), under solvothermal conditions is described. Single-crystal X-ray diffraction analyses revealed that all of compounds are homochiral 3D structure. 1 and 2 are isostructural and crystallize in the trigonal space group P3{sub 2}21, while 3 crystallizes in monoclinic space group P2{sub 1}. The structure of 1 and 2 consists of metal-D-cam helical chains which are pillared with pyrazine ligands into a 3D framework structure and 3 features a 3D homochiral framework involving one-dimensional manganese-carboxylate chains that are aligned parallel to the b axis. Magnetic susceptibility data of all compounds were collected. The findings indicate that μ{sub 2}-pyrazine dominate weak antiferromagnetic coupling within 1 and 2, while 3 exhibits antiferromagnetic behavior through the carboxylate groups of D-cam ligand. -- Graphical abstract: The preparations and properties of three new homochiral three-dimensional (3D) coordination polymers, [M(D-cam)(pyz)(H{sub 2}O){sub 2}]{sub n} (M=Co (1) and Ni (2); D-H{sub 2}cam=(+) D-camphoric acid; pyz=pyrazine) and [Mn{sub 2}(D-cam){sub 2}(H{sub 2}O){sub 2}] (3), under solvothermal conditions is described. Single-crystal X-ray diffraction analyses revealed that all of compounds are homochiral 3D structure. 1 and 2 are isostructural and crystallize in the trigonal space group P3{sub 2}21, while 3 crystallizes in monoclinic space group P2{sub 1}. The structure of 1 and 2 consists of metal-D-cam helical chains which are pillared with pyrazine ligands into a 3D framework structure and 3 features a 3D homochiral framework involving one-dimensional manganese-carboxylate chains that are aligned parallel to the b axis. Magnetic susceptibility data of all compounds were collected. The findings indicate that μ{sub 2}-pyrazine dominate weak antiferromagnetic coupling within 1 and 2, while 3 exhibits antiferromagnetic behavior through the carboxylate groups of D-cam ligand. Highlights: • Three homochiral 3D coordination polymers were synthesized. • 1 and 2 are 3D structure with metal-D-cam helical chains pillared by pyrazine. • 3 shows a 3D homochiral framework involving 1D manganese-carboxylate chains. • Magnetic data analysis indicates that 1–3 exhibit weak antiferromagnetic coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical and magnetic properties modification in heavy ion irradiated nanograin NixCo(3-x)O4 films

Reactively sputtered NixCo(3-x)O4 films (x = 1.5, 1.0, and 0.75) were grown and subsequently irradiated with 5.5 MeV Si+ ions to investigate effects of lattice-site and charge state distribution. Films were characterized before and after irradiation by x-ray diffraction, x-ray photoemission spectroscopy, Rutherford backscattering spectroscopy, electric resistivity measurements, and temperature-dependent AC and DC magnetometry. Results indicate that ion irradiation induces oxygen loss, partial reduction of nickel, and an increase in both low temperature ferrimagnetism and room temperature conductivity. Frequency dependent AC magnetic susceptibility measurements indicate a spin-glass like transition at low temperature which moves to higher temperature after irradiation. Significance of the charge transfer for magnetism and conduction in a mixed spinel with Co2+, Co3+, Ni2+, and Ni3+ in tetrahedral and octahedral sites is discussed.

Environmental Molecular Sciences Laboratory↗

Structural and magnetic properties of RTiNO{sub 2} (R=Ce, Pr, Nd) perovskite nitride oxides

Neutron powder diffraction indicates that CeTiNO{sub 2} and PrTiNO{sub 2} crystallize with orthorhombic Pnma symmetry (Ce: a=5.5580(5), b=7.8369(7), and c=5.5830(4) Å; Pr: a=5.5468(5), b=7.8142(5), and c=5.5514(5) Å) as a result of a{sup –}b{sup +}a{sup –} tilting of the titanium-centered octahedra. Careful examination of the NPD data, confirms the absence of long range anion order in both compounds, while apparent superstructure reflections seen in electron diffraction patterns provide evidence for short range anion order. Inverse magnetic susceptibility plots reveal that the RTiNO{sub 2} (R=Ce, Pr, Nd) compounds are paramagnetic with Weiss constants that vary from −28 to −42 K. Effective magnetic moments for RTiNO{sub 2} (R=Ce, Pr, Nd) are 2.43 μ{sub B}, 3.63 μ{sub B}, and 3.47 μ{sub B}, respectively, in line with values expected for free rare-earth ions. Deviations from Curie–Weiss behavior that occur below 150 K for CeTiNO{sub 2} and below 30 K for NdTiNO{sub 2} are driven by magnetic anisotropy, spin–orbit coupling, and crystal field effects. - Graphical abstract: The structure and magnetism of the oxide nitride perovskites RTiNO{sub 2} (R=Ce, Pr, Nd) have been explored. The average symmetry is shown to be Pnma with a random distribution of oxide and nitride ions and a{sup −}b{sup +}a{sup −} tilting of the titanium-centered octahedra, but electron diffraction shows evidence for short range anion order. All three compounds are paramagnetic but deviations from the Curie Weiss law are seen below 150 K for R=Ce and below 30 K for R=Nd. - Highlights: • The oxide nitride perovskites RTiNO{sub 2} (R=Ce, Pr) have been prepared and their structures determined. • Diffraction measurements indicate short range cis-order of O and N, but no long range order. • Compounds are paramagnetic with Weiss constants that vary from −28 to −42 K. • CeTiO{sub 2}N and NdTiO{sub 2}N deviate from Curie–Weiss behavior below 150 and 30 K, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-temperature X-ray diffraction measurements of fluorite-related rare earth antimonates Ln{sub 3}SbO{sub 7} (Ln=Nd, Tb) and their magnetic properties

Ternary rare-earth antimonates Ln{sub 3}SbO{sub 7} (Ln=rare earths) were prepared, and their structures were determined by X-ray diffraction measurements. They crystallize in an orthorhombic superstructure of cubic fluorite (space group Cmcm for Ln=La, Pr; Ccmm for Ln=Sm–Dy), in which Ln{sup 3+} ions occupy two different crystallographic sites (the 8-coordinated and 7-coordinated). For Ln=Nd, two phases with the Cmcm and Ccmm space groups coexist at room temperature. When the temperature was increased, the Nd{sub 3}SbO{sub 7} compound transformed into a single phase with the space group Cmcm. Through magnetic susceptibility measurements, an antiferromagnetic transition was observed at 3.0 K (Ln=Nd) and 7.8 K (Ln=Tb). Analysis of the magnetic specific heat for Tb{sub 3}SbO{sub 7} indicates that the 8-coordinated Tb ions magnetically orders at 7.8 K, and with furthermore decreasing temperature, the 7-coordinated Tb ions shows antiferromagnetic ordering at 3.0 K. - Graphical abstract: Temperature dependence of the specific heat divided by temperature (C{sub p}/T) and the magnetic entropy (S{sub mag}) for Tb{sub 3}SbO{sub 7}. Two-step magnetic transition has been observed. - Highlights: • The phase transition of Nd{sub 3}SbO{sub 7} is from the Ccmm space group to the Cmcm one. • Nd{sub 3}SbO{sub 7} shows an antiferromagnetic transition at 3.0 K. • For Tb{sub 3}SbO{sub 7}, two-step magnetic transition has been observed at 7.8 and 3.0 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Alignment, and Magnetic Properties of Monodisperse Nickel Nanocubes

This Communication describes the synthesis of highly monodispersed 12 nm nickel nanocubes. The cubic shape was achieved by using trioctylphosphine and hexadecylamine surfactants under a reducing hydrogen atmosphere to favor thermodynamic growth and the stabilization of {100} facets. Varying the metal precursor to trioctylphosphine ratio was found to alter the nanoparticle size and shape from 5 nm spherical nanoparticles to 12 nm nanocubes. High-resolution transmission electron microscopy showed that the nanocubes are protected from further oxidation by a 1 nm NiO shell. Synchrotron-based X-ray diffraction techniques showed the nickel nanocubes order into [100] aligned arrays. Magnetic studies showed the nickel nanocubes have over 4 times enhancement in magnetic saturation compared to spherical superparamagnetic nickel nanoparticles.

CHEM↗

Structure and magnetic properties of Ce₃(Ni/Al/Ga)₁₁—A new phase with the La₃Al₁₁ structure type

Single crystals of Ce₃(Ni/Al/Ga)₁₁ were obtained from an Al flux reaction. Single crystals of the title compound crystallizing in the orthorhombic space group Immm (No. 71, Z = 2) with a = 436.38(14), b = 1004.5(3) and c = 1293.4(4) pm. This is a standardized unit cell of the previously published La₃Al₁₁ structure type. Wavelength dispersive microprobe provides the composition of Ce₃.₁₁₍₁₎Ni₀.₀₃₍₁₎Al₈.₉₅₍₁₎Ga₁.₉₀₍₁₎. Single crystal refinement provides the composition Ce₃Ni₀.₀₈Al₉.₁₃Ga₁.₇₈ with substitution of the Ni and Ga on the Al1 and Al4 sites with the Al2 and Al3 solely occupied by Al. Magnetic susceptibility measurements reveal antiferromagnetic ordering with T N = 4.8 K and there is no evidence for a ferromagnetic ordering that has been reported for Ce₃Al₁₁. The effective magnetic moment was found to be μ eff = 1.9μB/Ce, which is lower than the expected value for trivalent Ce (2.54μB/Ce).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, structures, and magnetic properties of cobalt(II) and nickel(II) coordination polymers based on a V-shaped ligand

Two coordination polymers [Co{sub 2}(TA)(4,4′-bipy){sub 2}(H{sub 2}O){sub 2}]·H{sub 2}O (1) and [Ni{sub 2}(TA)(4,4′-bipy){sub 2}(H{sub 2}O){sub 4}]·3H{sub 2}O (2) were prepared by hydrothermal reactions of MCl{sub 2}·6H{sub 2}O (M = Co, Ni) with a V-shaped ligand TDPA (3,3′,4,4′-thiodiphthalic anhydride) and a I-shaped N-donor co-ligand (4,4′-bipy). They were characterized by elemental analyses, thermogravinetric analyses, and magnetic behavior. As is expected, TDPA hydrolyzes into the corresponding tetra-carboxylate acid H{sub 4}TA (3,3′,4,4′-thiodiphthalic acid) during the reactions. Co{sub 2} dimer and Ni mononuclear center are connected into two-dimensional (2D) layers by H{sub 4}TA and 4,4′-bipy bridge in 1 and 2, respectively. The most amazing feature is that 1 and 2 exhibit interesting spin-canting metamagnetism and weak ferromagnetic behavior, respectively, with the critical Néel temperature of T{sub N} =4 K for 1 and T{sub N} =13 K for 2, based on variable temperature magnetic susceptibility measurements. In low mono- or dinuclear metal system, such magnetic behaviors have rare been observed. Furthermore, complex 1 will be a potential metamagnet material. - Graphical abstract: Two Co(II) and Ni(II) coordination polymers were synthesized by hydrothermal reactions from a V-shape ligand (3,3′,4,4′-thiodiphthalic anhydride) and a I-shape ligand (4,4′-bipy), which were characterized by single crystal X-ray diffraction, elemental analyses, thermogravinetric analyses, and magnetic behavior, and exhibit interesting spin-canting metamagnetism and weak ferromagnetic behavior, respectively. - Highlights: • Two Co(II) and Ni(II) coordination polymers were successfully synthesized. • Co(II) coordination polymer shows an interesting spin-canting metamagnetism. • Ni(II) coordination polymer exhibits a weak ferromagnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of (1 1 1)-oriented strain on the structure and magnetic properties of La 0.7 Sr 0.3 MnO 3 thin films

Using strain, i.e. subtle changes in lattice constant in a thin film induced by the underlying substrate, opens up intriguing new ways to control material properties. We present a study of the effects of strain on structural and ferromagnetic properties of (1 1 1) pc -oriented La 0.7 Sr 0.3 MnO 3 epitaxial thin films grown on NdGaO 3 , SrTiO 3 , and DyScO 3 substrates. (The subscript pc denotes the pseudo-cubic symmetry.) The results show that La 0.7 Sr 0.3 MnO 3 assumes a monoclinic unit cell on NdGaO 3 and DyScO 3 and a rhombohedral unit cell on SrTiO 3 . For La 0.7 Sr 0.3 MnO 3 on NdGaO 3 and DyScO 3 a uniaxial magnetic anisotropy is found, while La 0.7 Sr 0.3 MnO 3 on SrTiO 3 is magnetically isotropic. The Néel model is used to explain the anisotropy of the thin films on NdGaO 3 and SrTiO 3 , however, for La 0.7 Sr 0.3 MnO 3 on DyScO 3 the effect of octahedral rotations needs to be included through the single ion model. Finally, through examination of the Curie temperature of the strained films we suggest that (1 1 1)-strain has a different effect on the Jahn-Teller splitting of e g and t 2g electron levels than what is seen in (0 0 1) pc -oriented La 0.7 Sr 0.3 MnO 3 thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterizing physical, chemical, and magnetic properties at the nanoscale

Synchrotron light sources are extremely useful for the characterization of materials in many different research fields (including physics, chemistry, materials science, biology, medicine, geology, and cultural heritage). The evolution of technology, however, currently points toward the miniaturization of devices and molecular motors, as well as the creation (through atomic manipulation) of new materials. This brings an acute necessity for direct chemical imaging of materials, i.e., with the use of x-ray microscopy at the nanometer and atomic length scales.1, 2 Although a variety of new x-ray nanoprobes and x-ray microscopy techniques have been developed in recent years, the spatial resolution of direct chemical or magnetic contrast imaging techniques remains on the order of several nanometers. Invented in the 1980s, scanning tunneling microscopy (STM) allows a large range of materials to be viewed at the atomic level.3 STM also offers a finer degree of spatial resolution than almost any other image technique, but it is chemically ‘blind’ and thus cannot be used alone to directly identify chemical elements on a surface. For many years, researchers have attempted to solve this problem by combining STM with synchrotron x-ray excitations,4–7 and a new technique—known as synchrotron xray scanning tunneling microscopy (SX-STM)—has emerged. In this technique—which combines the chemical sensitivity of xrays with the high spatial resolution of STM—a monochromatic x-ray beam is used to illuminate a tip-sample junction, while the tip makes raster scans across the sample surface. A feedback system maintains a tip–sample separation that is typically less than 1nm. The goal is tomodulate the tunneling current through x-ray excitation and therewith obtain electronic and chemical contrast. It is difficult, however, to achieve real chemical contrast because of three serious issues. First, electrons excited by x-rays do not just tunnel into the tip, but can also be ejected from the sample and hit the sidewalls of the tip detector (which degrades the spatial resolution). Second, because photoejected electrons still provide a deceptive current signal in the far field, the STM feedback system can lift the tip out of the tunneling regime without being noticed. Last, themeasured tip current is always a convolution of the conventional tunnel current (which is related to the sample topography) and the x-ray-excited electrons (which carry the material’s chemical information).

36 MATERIALS SCIENCE↗

Synthesis, structure, and magnetic properties of magnesium bis-3,6-di-tert-butyl-о-benzosemiquinonate complexes with N-donor ligands

A series of six-coordinate magnesium bis-3,6-di-tert-butyl-о-benzosemiquinonate complexes with different N-donor ligands (2,2´-dipyridyl, 1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, pyridine, N-phenyl-1-(4-pyridinyl)methanimine) were synthesized. The molecular and crystal structures of these complexes were determined by X-ray diffraction. In the complexes with bidentate N-donor ligands, the O,O-diolate o-semiquinone ligands are cis to each other, whereas the compounds with monodentate ligands contain organic radical anions in trans positions. The specific features of magnetic exchange coupling between organic radical ligands were studied by temperature-dependent magnetic susceptibility measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal growth and magnetic properties of Ln-Mn-Al (Ln=Gd, Yb) compounds of the CaCr{sub 2}Al{sub 10} and ThMn{sub 12} structure types

We report the growth and characterization of LnMn{sub 2+x}Al{sub 10-x} (Ln=Gd, Yb) crystals adopting the CaCr{sub 2}Al{sub 10} and ThMn{sub 12} structure types. Single crystals of LnMn{sub 2+x}Al{sub 10-x} were synthesized via the self-flux method and characterized with single crystal X-ray diffraction. We compare LnMn{sub 2+x}Al{sub 10-x} compounds adopting the CaCr{sub 2}Al{sub 10} and ThMn{sub 12} structure types, and outline synthesis methods to obtain each polymorph. Magnetic susceptibility measurements show paramagnetic behavior down to 3 K for both CaCr{sub 2}Al{sub 10}- and ThMn{sub 12}-type compounds, with observed magnetic moments of 1.3{mu}{sub B} for compounds adopting the CaCr{sub 2}Al{sub 10} structure type to 4.2{mu}{sub B} for those adopting the ThMn{sub 12} structure type. Compounds of both structure type exhibit metallic resistivity, with upturns at low temperature attributed to Kondo scattering. - Graphical abstract: We report the growth and characterization of LnMn{sub 2+x}Al{sub 10-x} (Ln=Gd, Yb) crystals adopting the CaCr{sub 2}Al{sub 10} and ThMn{sub 12} structure types. Single crystals of LnMn{sub 2+x}Al{sub 10-x} were synthesized via the self-flux method and characterized with single crystal X-ray diffraction. We compare LnMn{sub 2+x}Al{sub 10-x} compounds adopting the CaCr{sub 2}Al{sub 10} and ThMn{sub 12} structure types, and outline synthesis methods to obtain each polymorph. Magnetic susceptibility measurements show paramagnetic behavior down to 3 K for both CaCr{sub 2}Al{sub 10}- and ThMn{sub 12}-type compounds, with observed magnetic moments of 1.3{mu}{sub B} for compounds adopting the CaCr{sub 2}Al{sub 10} structure type to 4.2{mu}{sub B} for those adopting the ThMn{sub 12} structure type. Compounds of both structure type exhibit metallic resistivity, with upturns at low temperature attributed to Kondo scattering. Highlights: Black-Right-Pointing-Pointer We have grown Ln (Mn,Al){sub 12} (Ln=Gd, Yb) single crystals of the ThMn{sub 12} and CaCr{sub 2}Al{sub 10} structure types by flux growth methods. Black-Right-Pointing-Pointer Synthetic parameters to stabilize two structure types are discussed. Black-Right-Pointing-Pointer Compounds exhibit metallic resistivity with Kondo upturns below 50 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron diffraction studies on structural and magnetic properties of RE{sub 2}NiGe{sub 3} (RE=La, Ce)

We report the crystallographic properties of RE{sub 2}NiGe{sub 3} (RE=La, Ce) synthesized by arc melting. Rietveld refinement on the powder neutron diffraction (ND) data suggest both compounds are isostructural and crystallize in the non-centrosymmetric Er{sub 2}RhSi{sub 3} type structure having hexagonal space group P6{sup ¯}2c. In the crystal structure of RE{sub 2}NiGe{sub 3}, two dimensional arrangements of nickel and germanium atoms lead to the formation of hexagonal layers with rare earth atoms sandwiched between them. Magnetic susceptibility measurements performed in low fields exhibit antiferromagnetic ordering in cerium compound around (T{sub o}=) 3.2 K. Neutron diffraction measurements at 2.8 K (i.e., at T<T{sub o}) neither show any change in the intensities of the diffraction lines nor indicate the appearance of any new diffraction lines in the Q-range of 0.47–7.34 Å{sup −1}, thus ruling out any long-range magnetic order. - Graphical abstract: The compounds La{sub 2}NiGe{sub 3} and Ce{sub 2}NiGe{sub 3} crystallize in the Er{sub 2}RhSi{sub 3} type. Magnetic susceptibility show antiferromagnetic ordering for Ce{sub 2}NiGe{sub 3} at 3.2 K and neutron diffraction confirms the absence of long range ordering. - Highlights: RE{sub 2}NiGe{sub 3} (RE=La, Ce) crystallize in the ordered superstructure of the AlB{sub 2} type. Magnetic susceptibility measurements exhibit antiferromagnetic ordering in Ce{sub 2}NiGe{sub 3}. Structure and magnetism of RE{sub 2}NiGe{sub 3} (RE=La, Ce) are studied by neutron diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures and magnetic properties of Ni n (n = 36-40) clusters from first-principles calculations

A genetic algorithm (GA) coupled with a tight-binding (TB) interatomic potential is used to search for the low-energy structures of medium-sized Ni n (n = 36-40) clusters. Structural candidates obtained from our GA search are further optimized with first-principles calculations. The medium-sized nickel clusters ranging from 36 to 40 atoms are found to favor the double-icosahedron-based structures with a Ni7 core (a pentagonal bipyramidal structure) except Ni38 cluster. The lowest-energy structure of Ni38 can be considered to be a magic cluster, which is a typical face-centered cubic structure with large stability and magnetic moment.

Song, W.↗