Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Enhanced Geothermal System Potential for Sites on the Eastern Snake River Plain, Idaho

The Snake River volcanic province overlies a thermal anomaly that extends deep into the mantle and represents one of the highest heat flow provinces in North America (Blackwell and Richards, 2004). This makes the Snake River Plain (SRP) one of the most under-developed and potentially highest producing geothermal districts in the United States. Elevated heat flow is typically highest along the margins of the topographic SRP and lowest along the axis of the plain, where thermal gradients are suppressed by the Snake River aquifer. Beneath this aquifer, however, thermal gradients rise again and may tap even higher heat flows associated with the intrusion of mafic magmas into the mid-crustal sill complex (e.g., Blackwell, 1989).

15 GEOTHERMAL ENERGY↗

Muon Tomography of Deep Reservoirs

Imaging subsurface geological formations, oil and gas reservoirs, mineral deposits, cavities or magma chambers under active volcanoes has been for many years a major quest of geophysicists and geologists. Since these objects cannot be observed directly, different indirect geophysical methods have been developed. They are all based on variations of certain physical properties of the subsurface that can be detected from the ground surface or from boreholes. Electrical resistivity, seismic wave’s velocities and density are certainly the most used properties. If we look at density, indirect estimates of density distributions are performed currently by seismic reflection methods - since the velocity of seismic waves depend also on density - but they are expensive and discontinuous in time. Direct estimates of density are performed using gravimetric data looking at variations of the gravity field induced by the density variations at depth but this is not sufficiently accurate. A new imaging technique using cosmic-ray muon detectors has emerged during the last decade and muon tomography - or muography - promises to provide, for the first time, a complete and precise image of the density distribution in the subsurface. Further, this novel approach has the potential to become a direct, real-time, and low-cost method for monitoring fluid displacement in subsurface reservoirs.

borehole detector↗

Multi-area Grid Metrics Analyzer

The MAGMA software package is a package created in the R scripting language that reads a SQL database and outputs tables and figures of important data. The SQL database is created by another R package called “rplexos” and uses the .zip solution file output by PLEXOS, which is commercially available production cost modeling software.

Source record↗

Provisional Conceptual Model of the Camas Prairie (ID) Geothermal System from Play Fairway Analysis

Camas Prairie, Idaho, is an EW-trending structural graben that lies north of the Snake River Plain hotspot track. It is bounded on the north by the Idaho Batholith, and on the south by the Mount Bennett Hills. This region was investigated by the SRP Geothermal Play Fairway Analysis team, which included focused geologic, geochemical, and geophysical studies. The Camas Prairie geothermal system resource is indicated by warm springs and wells, geophysical analysis of buried faults and basins, mapped faults, structural analysis of all faults and lineaments, high 3He/4He, cation and multicomponent geothermometry, and the occurrence of young basalt vents and lava flows along the range front. Our provisional conceptual model includes the following components: (1) High permeability is indicated by the confluence of intersecting faults, including the major range front system and The Pothole fault system, with releasing bends as deduced from detailed field studies, and the presence of springs along mapped structural features; (2) High heat is inferred to result from mid- to shallow crustal sills, as evidenced by the location of vents along the range front; the youngest dated vent is 692 ka, but 2 ka vents lie to NW; (3) an effective seal is indicated by magnetotelluric studies, which suggest a clay seal over the prospective target area that is likely a result of hydrothermal alteration. This model is similar to that proposed for the western SRP but is less energetic due to the smaller volume of magma inferred. It is also similar to Basin-and-Range geothermal systems, but differs by including a distinct magmatic heat component.

15 GEOTHERMAL ENERGY↗

Porting the Nonlinear Optimization Library HiOp to Accelerator-Based Hardware Architectures

While interior point method has been the centerpiece of nonlinear programming tools used in science and engineering, its reliance on linear solvers that can tackle sparse symmetric indefinite and highly ill-conditioned problems made it difficult to implement it effectively on hardware accelerators. HiOp optimization package attempts to provide an implementation of the interior point method suitable for hardware accelerators by compressing the original sparse problem to produce an underlying linear problem that is dense and of manageable size. Implementations of dense linear solvers are more mature and utilize hardware accelerators better than their sparse counterparts. There is a number of important domain problems, such as optimal power flow analysis for power grids, where the sparse problem can be effectively compressed and deploying dense linear solver within the interior point method can improve performance. Here we describe a portable implementation of HiOp optimization engine, which uses a linear solver from Magma library and runs entirely on hardware accelerators. To compress the problem, HiOp uses customized mixed dense-sparse linear algebra. All HiOp kernels are implemented using Umpire and RAJA portability libraries. We describe details of the implementation and discuss trade-offs between performance, portability and development cost.

97 MATHEMATICS AND COMPUTING↗

Tectonic versus volcanic origin of the summit depression at Medicine Lake Volcano, California

Medicine Lake Volcano is a Quaternary shield volcano located in a tectonically complex and active zone at the transition between the Basin and Range Province and the Cascade Range of the Pacific Province. The volcano is topped by a 7x12 km elliptical depression surrounded by a discontinuous constructional ring of basaltic to rhyolitic lava flows. This thesis explores the possibility that the depression may have formed due to regional extension (rift basin) or dextral shear (pull-apart basin) rather than through caldera collapse and examines the relationship between regional tectonics and localized volcanism. Existing data consisting of temperature and magnetotelluric surveys, alteration mineral studies, and core logging were compiled and supplemented with additional core logging, field observations, and fault striae studies in paleomagnetically oriented core samples. These results were then synthesized with regional fault data from existing maps and databases. Faulting patterns near the caldera, extension directions derived from fault striae P and T axes, and three-dimensional temperature and alteration mineral models are consistent with slip across arcuate ring faults related to magma chamber deflation during flank eruptions and/or a pyroclastic eruption at about 180 ka. These results are not consistent with a rift or pull-apart basin. Limited subsidence can be attributed to the relatively small volume of ash-flow tuff released by the only known major pyroclastic eruption and is inconsistent with the observed topographic relief. The additional relief can be explained by constructional volcanism. Striae from unoriented and oriented core, augmented by striae measurements in outcrop suggest that Walker Lane dextral shear, which can be reasonably projected from the southeast, has probably propagated into the Medicine Lake area. Most volcanic vents across Medicine Lake Volcano strike north-south, suggesting they are controlled by crustal weakness related to Basin and Range extension. Interaction of dextral shear, Basin and Range extension, and the zone of crustal weakness expressed as the Mount Shasta-Medicine Lake volcanic highland controlled the location and initiation of Medicine Lake Volcano at about 500 ka.

15 GEOTHERMAL ENERGY↗

Tungsten isotopes and the origin of the Moon

Here, the giant impact model of lunar origin predicts that the Moon mainly consists of impactor material. As a result, the Moon is expected to be isotopically distinct from the Earth, but it is not. To account for this unexpected isotopic similarity of the Earth and Moon, several solutions have been proposed, including (i) post-giant impact Earth–Moon equilibration, (ii) alternative models that make the Moon predominantly out of proto-Earth mantle, and (iii) formation of the Earth and Moon from an isotopically homogeneous disk reservoir. Here we use W isotope systematics of lunar samples to distinguish between these scenarios. We report high-precision 182 W data for several low-Ti and high-Ti mare basalts, as well as for Mg-suite sample 77215, and lunar meteorite Kalahari 009, which complement data previously obtained for KREEP-rich samples. In addition, we utilize high-precision Hf isotope and Ta/W ratio measurements to empirically quantify the superimposed effects of secondary neutron capture on measured 182 W compositions. Our results demonstrate that there are no resolvable radiogenic 182 W variations within the Moon, implying that the Moon differentiated later than 70 Ma after Solar System formation. In addition, we find that samples derived from different lunar sources have indistinguishable 182 W excesses, confirming that the Moon is characterized by a small, uniform ~+26 parts-per-million excess in 182 W over the present-day bulk silicate Earth. This 182W excess is most likely caused by disproportional late accretion to the Earth and Moon, and after considering this effect, the pre-late veneer bulk silicate Earth and the Moon have indistinguishable 182 W compositions. Mixing calculations demonstrate that this Earth–Moon 182 W similarity is an unlikely outcome of the giant impact, which regardless of the amount of impactor material incorporated into the Moon should have generated a significant 182 W excess in the Moon. Consequently, our results imply that post-giant impact processes might have modified 182 W, leading to the similar 182 W compositions of the pre-late veneer Earth's mantle and the Moon.

58 GEOSCIENCES↗

The timing of lunar solidification and mantle overturn recorded in ferroan anorthosite 62237

Ferroan anorthosite suite (FAS) rocks are widely interpreted to represent primordial lunar crust. Despite their importance in pinpointing the timing of lunar crust formation, robust chronological investigations for this rock type are scarce. Here, we report the Ar-Ar, Rb-Sr, and Sm-Nd isotopic systematics for the FAS troctolitic anorthosite 62237. The Ar-Ar isotopic system has been reset by a thermal event at 3710 ± 48 Ma, and the Rb-Sr isotopic systematics has been disturbed such that a Rb-Sr isochron age cannot be determined. However, an internal isochron for the Sm-Nd isotopic system has yielded an age of 4350 ± 73 Ma (MSWD = 2.0) with an initial ε 143 Nd CHUR of -0.53 ± 0.26. The mineral and whole-rock fractions of 62237 plot on the same internal isochron as FAS sample 60025. The combined datasets define an age of 4372 ± 35 Ma (MSWD = 4.0) with an initial ε 143 Nd CHUR of -0.17 ± 0.22. Literature Sm-Nd data for FAS and Mg-suite whole-rocks also plot on the 60025-62237 isochron. The coherence of data from both FAS and Mg-suite rocks examined thus far suggests that both rock suites formed contemporaneously from identical, or nearly identical, sources. In addition, the concordance of FAS and Mg-suite ages suggests that primordial crust solidification either involved both magmatic suites, or that Mg-suite magmatism was contemporaneous with FAS magmatism within resolution of the Sm-Nd chronometer. The ages for FAS and Mg-suite also coincide with the formation ages of the mare basalt source regions and urKREEP. Ferroan anorthosite suite rocks and urKREEP are thought to represent primordial LMO solidification products, whereas Mg-suite and the mare basalt source regions are argued to represent mixtures of various LMO crystallization products that were formed during density-driven overturn of the LMO. The concordance of ages implies that the 4372 ± 35 Ma Sm-Nd isochron records the age of mantle overturn, and that overturn occurred during, or shortly after, solidification of the LMO.

58 GEOSCIENCES↗

A collective trigger for widespread planetesimal formation revealed by accretion ages

The formation of planetesimals was an integral part of the cascading series of processes that built the terrestrial planets. To illuminate planetesimal formation, here we develop a refined thermal evolution model to calculate the formation ages of meteorite parent planetesimals. This model includes chemical reactions and phase changes during heating, as well as natural variations in the proportions of the constituent phases of these planetesimals. We find that the parent bodies of non-carbonaceous (NC) and carbonaceous (CC) iron meteorites start forming at very similar times ( ∼ 0.95 Myr after calcium-aluminium-rich inclusion [CAI] formation) and occupy overlapping time windows. NC and CC chondrite parent bodies formed later during non-overlapping periods. We combine these ages with proportions of isotopic end-members we recover from mixing models to construct records of motion throughout the protoplanetary disk. These records argue that NC and CC material traversed the barrier in the disk after ∼ 0.95 Myr after CAI formation. The onset of this motion coincided with planetesimal formation, indicating that the phenomenon that drove motion also triggered planetesimal formation. We argue that this feature also served as the semi-permeable barrier in the disk. Although its identity is uncertain, the effects this phenomenon had on the timing of planetesimal formation and motion through the disk can now serve as constraints on models of disk evolution. Models that reproduce these effects would elucidate the nature and implications of this phenomenon, which is key to unlocking a holistic model of terrestrial planet building.

Astronomy and AstroPhysics↗

IUPAC-IUGS recommendation on the half-lives of 147 Sm and 146 Sm

In this paper, the IUPAC-IUGS joint Task Group “Isotopes in Geosciences” recommends a value of (106.25 ± 0.38) Ga for the half-life of 147 Sm, and a corresponding decay constant λ 147 = (6.524 ± 0.024) × 10 –12 a –1 , both with a coverage factor k = 2. For the extinct radionuclide 146 Sm two very different half-lives are used in the scientific community ( c . 68 and 103 Ma), to such a degree that no consensus value can be endorsed at present by the Task Group. Pending dedicated re-investigations it is recommended that papers using the 146 Sm decay to quantify the cosmo/geological evolution of (extra)terrestrial samples perform a twin set of calculations using both proposed half-lives.

146Sm↗

The formation and evolution of the Moon’s crust inferred from the Sm-Nd isotopic systematics of highlands rocks

Ages determined for magnesian and ferroan anorthosite crustal rock suites overlap, suggesting they formed contemporaneously about 4.3–4.5 Ga. A notable exception is the Sm-Nd age previously determined on Mg-suite gabbronorite 67667 which is at least 100 Ma younger than the youngest ferroan anorthosite. New chronologic measurements of 67667 presented here yield concordant Sm-Nd and Rb-Sr mineral isochron ages of 4349 ± 31 Ma and 4368 ± 67 Ma, suggesting the sample is older than previous estimates. Furthermore, a whole rock Sm-Nd isochron of Mg-suite rocks from the Apollo 14, 15, 16, and 17 landing sites yields an age of 4348 ± 25 Ma, indicating that Mg-suite magmatism was widespread and roughly contemporaneous on the lunar nearside. Here, analysis of Sm-Nd internal isochron ages confirms that Mg-suite magmatism was restricted to a period between about 4.33 and 4.35 Ga at the Apollo 14, 15, 16, and 17 landing sites and was synchronous with magmatism at the Apollo 16 site associated with the ferroan anorthosite suite between 4.35 and 4.37 Ga. Magnesian- and ferroan anorthosite suite rocks with ages younger than ~4.33 Ga appear to have experienced slow cooling in the deep lunar interior, so that the ages record when the samples cooled below the closure temperature of the Sm-Nd isotopic system and not the time they crystallized.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting methane accumulations generated from humic Carboniferous coals in the Donbas fold belt (Ukraine)

The numerical modeling of the Ukrainian part of the Donbas fold belt indicates that the coalification pattern was controlled mainly by the maximum burial depth of coal seams and the heat flow (HF) (40-75 mW/m{sup 2}) during the Permian. The coalification pattern was overprinted by magmatic events during the Late Permian in the south syncline (150 mW/m{sup 2}) and during the Permian-Triassic in the north of the Krasnoarmeisk region (120 mW/m{sup 2}). The coalification pattern shows a strong increase in vitrinite reflectance values toward the east and southeastern parts of the study area likely caused by (1) an eastward increase in burial depth, (2) a probable eastward increase in HF, and, (3) probable magmatic activity. An increase in total erosion toward the eastern and southeastern parts was also observed with a maximum erosional amount of approximately 8 km (5 mi) in the southeastern part of the study area. The basin modeling of this area predicts that the main phase of hydrocarbon generation occurred during the Carboniferous-Early Permian subsidence. The magmatic events that occurred during the Permian-Triassic caused renewed pulses of hydrocarbon generation. A large amount of the generated hydrocarbons was lost to the surface because of a lack of seals. However, the numerical simulation predicts accumulations of about 2 tcf (57 billion m{sup 3}) of methane generated from Carboniferous coals in the south and main synclines, where Lower Permian seal rocks are preserved. Finally, this study provides data on methane resources along the northern flank

01 COAL, LIGNITE, AND PEAT↗

Newberry Volcano magnetotelluric impedance data

This submission includes all magnetotelluric (MT) transfer functions acquired during the 2014 EGS stimulation at Newberry Volcano in central Oregon as well as previously acquired MT data for the overall volcano. Plots of all data are provided (including forward response from a model used in a publication now in review in G-cubed). Also included is a kmz file giving all station locations.

3D↗