Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Longitudinal dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Dynamic characteristics of a two-stage variable-mass flexible missile with internal flow

A general formulation of the dynamical problems associated with powered flight of a two stage flexible, variable-mass missile with internal flow, discrete masses, and aerodynamic forces is presented. The formulation comprises six ordinary differential equations for the rigid body motion, 3n ordinary differential equations for the n discrete masses and three partial differential equations with the appropriate boundary conditions for the elastic motion. This set of equations is modified to represent a single stage flexible, variable-mass missile with internal flow and aerodynamic forces. The rigid-body motion consists then of three translations and three rotations, whereas the elastic motion is defined by one longitudinal and two flexural displacements, the latter about two orthogonal transverse axes. The differential equations are nonlinear and, in addition, they possess time-dependent coefficients due to the mass variation.

Meirovitch, L.↗

Rigorous approaches to tether dynamics in deployment and retrieval

Dynamics of tethers in a linearized analysis can be considered as the superposition of propagating waves. This approach permits a new way for the analysis of tether behavior during deployment and retrieval, where a tether is composed by a part at rest and a part subjected to propagation phenomena, with the separating section depending on time. The dependence on time of the separating section requires the analysis of the reflection of the waves travelling toward the part at rest. Such a reflection generates a reflected wave, whose characteristics are determined. The propagation phenomena of major interest in a tether are transverse waves and longitudinal waves, all mathematically modelled by the vibrating chord equations, if the tension is considered constant along the tether. An interesting problem also considered is concerned with the dependence of the tether tension from the longitudinal position, due to microgravity, and the influence of this dependence on the propagation waves.

Antona, Ettore↗

The Interplay of Humor and Team Cohesion Over Time

Team bonding and interpersonal relationships are increasingly important as we continue understanding the effects of the pandemic on team dynamics. Specifically, team cohesion, defined as having a sense of belonging and commitment towards the group, has been found to be important for key team outcomes such as performance, relationships, and productivity (Beal, Cohen, Burke, & McLendon, 2003; Bell & Marentette, 2011). Research has stressed the benefits of positive humor on cohesion, with humor creating positive emotions and decreasing social distance (e.g., Robert & Wilbanks, 2012; Robinson & Smith-Lovin, 2001; Romero & Pescosolido, 2008). However, research around the impact of negative humor on cohesion is scarce. This study aims to examine the impact of both positive and negative humor on cohesion for teams over time. The longitudinal design allows us to examine the interplay of humor and cohesion throughout a team’s lifecycle to guide relationship development and management (Romero & Pescosolido, 2008). Humor is defined as remarks recognized as amusing or funny (Martin, 2007). Positive humor can be categorized as good-natured aimed to create mutual agreement, while negative humor is defined as aggressive, hostile, and unreciprocated (Coan & Gottman, 2007). Research has concluded the many benefits of positive humor, showing it can increase open communication, social support, and create a pleasant environment (Martineau, 1972; Robinson & Smith-Lovin, 2001; Romero & Pescosolido, 2008). The Humor Wheel model suggests that positive humor is contagious due to the positive affect produced and mimicked (Lehmann-Willenbrock & Allen 2014). Research has suggested positive humor would increase over time based on the norm of reciprocity; those treated positively are likely to respond similarly (Gouldner, 1960). Multiple parties’ involvement in humor exchanges highlights the interpersonal nature of humor. Thus, long-term consequences on relationships should be considered, such as cohesion (Robert & Wilbanks, 2012). It would be instrumental to understand how humor interactions could weaken or strengthen group cohesion through relational and emotional bonds over time (Martineau, 1972; Romero & Pescosolido, 2008). Positive humor should fundamentally increase team cohesion (Mesmer-Magnus, Glew, & Viswesvaran, 2012; Walter & Baruch, 2008) by promoting group harmony, team member attractiveness, and ingroup identity (Holmes, 2006). Thus, it is expected there is a positive relationship between positive humor and team cohesion over time (hypothesis 1). Humor is not always beneficial, especially when it elicits negative emotions (Dikkers, Doosje, & de Lange, 2011). Negative humor can be used to humiliate, tease, or insult (Coan & Gottman, 2007; Collinson, 1988; Romero & Cruthirds, 2006). It tends to cause distress and damage relationships, and in turn, decrease organizational performance and production (Avolio, Howell, & Sosik, 1999; Janes & Olson, 2000; Yerkes, 2001). Research concludes negative humor may create subgroups and decrease cooperation (Romero & Arendt, 2011). Research has also indicated positive implications for negative humor under specific circumstances. Negative humor could help to solidify ingroup identity and strengthen bonds when directed outside the team (Terrion & Ashforth, 2002; Thomae & Pina, 2015). For example, sport teams may use negative humor towards their opponent before a game, which emphasizes their differences and lowers the status and power of their opponent, ultimately promoting solidarity and cohesion inside the group. For this study, it is anticipated that negative humor toward other teammates will decrease team cohesion over time due to the damage to relationships and negative affect produced (Duncan, Smeltzer, & Leap, 1990; Maples, Dupey, Torres‐Rivera, Phan, Vereen, & Garrett, 2001). We also predicted that negative humor focused on something or someone outside the team will increase cohesion by enhancing ingroup ties and creating a common identity (Thomae & Pina, 2015). Thus, the relationship between negative humor and cohesion will be moderated by the target of the humor. The relationship will be negative when the target is within the team and positive when the target is outside (hypothesis 2).

Melissa M. Vazquez↗

Analytic model for the breakup of a coasting beam with space charge in isochronous accelerators

An analytical model based on the negative mass instability is introduced in this paper to explain the formation of the breakup of a coasting beam into small clusters in isochronous machines such as the case observed by Pozdeyev and Rodriguez in a small isochronous ring. Solving Poisson's equation in both charge and vacuum regions with the longitudinal beam density perturbation, the coherent radial space charge force which decreases the transition gamma is obtained. It is found that the modified transition gamma depends on the wave number of the density perturbation, longitudinal beam density distribution, beam intensity, and beam size. By combining the longitudinal space charge force caused by the perturbation and the modified transition gamma, a dispersion relation for a monoenergetic beam is derived and evaluated for the fastest-growing instability mode in terms of the beam parameters, such as energy, bunch length, intensity, and emittance. The fastest-growing negative mass mode number, which determines not only the cluster number but also the growth rate of the instability, is proportional to the orbit radius and inversely proportional to the initial beam size. With the growth of the instability, the particles at the points of local minimum density move to the ones of local maximum density, with the transition gamma increasing. Since the growth rate depends on the longitudinal density distribution, therefore, instead of a constant growth rate, our model shows that the growth rate decreases with time. The results above can be applied to both short and long wavelength limits. As an important application of this theory, the beam breakup effect in the isochronous cyclotron CYCIAE-100 is predicted.

43 PARTICLE ACCELERATORS↗

A Process-based Model with Temperature, Water, and Lab-derived Data Improves Predictions of Daily Culex pipiens/restuans Mosquito Density

While the number of human cases of mosquito-borne diseases has increased in North America in the last decade, accurate modeling of mosquito population density has remained a challenge. Longitudinal mosquito trap data over the many years needed for model calibration, and validation is relatively rare. In particular, capturing the relative changes in mosquito abundance across seasons is necessary for predicting the risk of disease spread as it varies from year to year. We developed a discrete, semi-stochastic, mechanistic process-based mosquito population model that captures life-cycle egg, larva, pupa, adult stages, and diapause for Culex pipiens (Diptera, Culicidae) and Culex restuans (Diptera, Culicidae) mosquito populations. This model combines known models for development and survival into a fully connected age-structured model that can reproduce mosquito population dynamics. Mosquito development through these stages is a function of time, temperature, daylight hours, and aquatic habitat availability. The time-dependent parameters are informed by both laboratory studies and mosquito trap data from the Greater Toronto Area. The model incorporates city-wide water-body gauge and precipitation data as a proxy for aquatic habitat. This approach accounts for the nonlinear interaction of temperature and aquatic habitat variability on the mosquito life stages. We demonstrate that the full model predicts the yearly variations in mosquito populations better than a statistical model using the same data sources. This improvement in modeling mosquito abundance can help guide interventions for reducing mosquito abundance in mitigating mosquito-borne diseases like West Nile virus.

59 BASIC BIOLOGICAL SCIENCES↗

Low-energy phonons in Bi 2 Sr 2 CaCu 2 O 8 + δ and their possible interaction with electrons measured by inelastic neutron scattering

Electron-phonon interaction in copper oxide superconductors is still enigmatic. Strong coupling for certain optic phonons is now well established experimentally, but theoretical understanding is challenging. Scattering of electrons near the Fermi surface by the longitudinal acoustic (LA) phonons is expected from basic theory because these phonons modulate electron density. We used inelastic neutron scattering on a large single crystal sample of optimally-doped Bi 2 Sr 2 CaCu 2 O 8+δ to show that low-energy LA phonons could couple to electronic density fluctuations only at small phonon wavevectors, which naturally limits any interaction to forward scattering. Such scattering should not be pairbreaking in the case of the d-wave gap. We also found that previously reported low energy phonon spectral weight half-way to the zone boundary is consistent with conventional lattice dynamics and does not reflect incipient charge density wave (CDW).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The poleward edge of the mid-latitude trough - Its formation, orientation and dynamics

Data from the Advanced Ionospheric Sounder (AIS) deployed at Halley, Antarctica (76-deg S, 27-deg W; L = 4.2) and the Dynamics Explorer-2 spacecraft (DE-2) are used to investigate several aspects of the formation processes and dynamics of the poleward edge of the midlatitude electron density trough. These include a study of the flux and energy of charged particles precipitating into the F-region as a function of Magnetic Local Time. It is found that local energetic electron precipitation is a major source of ionization of the poleward edge in the evening sector, but only after magnetic midnight transport processes become more important. Occasionally a significant increase in the flux of conjugate photoelectrons is colocated with the poleward edge of the trough in the morning sector. The combination of AIS and DE-2 data has allowed identification of significant longitudinal structure on the poleward edge of the trough that may be the result of substorm activity. It is found that the orientation of the poleward edge of the trough and the locus of the plasmapause predicted from the 'tear-drop' model vary in rather a similar manner with local time, though no close physical link between the two features is inferred from this coincidence.

Rodger, A. S.↗

Simulations of Water Vapor in the Upper Troposphere and Lower Stratosphere

A detailed study of the water vapor budget in the upper troposphere and lower stratosphere of the "Finite Volume CCM3" (FVCCM3) model is presented. The model is based on a combination of a finite-volume dynamical core (developed by Lin and Rood) and the physical package from Version 3 of the Community Climate Model (CCM3, developed at NCAR). The model was used with a horizontal resolution of 2 by 2.5 degrees and 55 levels, with the upper boundary at 0.0lhPa and a vertical resolution of about 1.2km near the tropopause. Most results presented are from a 17-year simulation performed for the Atmospheric Model Intercomparison Project. It is shown that the model simulates a realistic thermal structure in the tropical tropopause region and that water vapor distributions are in qualitative accord with observations (which are uncertain). The longitudinal structure of the tropical atmosphere is slightly too asymmetric, compared to reasonable estimates of the truth. The processes leading to the horizontal and vertical transport of water vapor in the tropopause region are analyzed in detail. Special attention is given to the realism of horizontal transport events (the ability of the model to retain sharply defined features) and to the role of localized vertical motions in transporting air (and water vapor) between the troposphere and stratosphere. It is shown that the vertical transport of water vapor in the tropical lower stratosphere occurs at about the same rate as that observed, while in many other models this vertical transport is too fast.

Pawson, Steven↗

Aerodynamic Database Development for Mars Smart Lander Vehicle Configurations

An aerodynamic database has been generated for the Mars Smart Lander Shelf-All configuration using computational fluid dynamics (CFD) simulations. Three different CFD codes, USM3D and FELISA, based on unstructured grid technology and LAURA, an established and validated structured CFD code, were used. As part of this database development, the results for the Mars continuum were validated with experimental data and comparisons made where applicable. The validation of USM3D and LAURA with the Unitary experimental data, the use of intermediate LAURA check analyses, as well as the validation of FELISA with the Mach 6 CF(sub 4) experimental data provided a higher confidence in the ability for CFD to provide aerodynamic data in order to determine the static trim characteristics for longitudinal stability. The analyses of the noncontinuum regime showed the existence of multiple trim angles of attack that can be unstable or stable trim points. This information is needed to design guidance controller throughout the trajectory.

Bobskill, Glenn J.↗

Global sound modes in mirror traps with anisotropic pressure

Global oscillations of inhomogeneous plasma with frequencies close to the bounce frequency of ions in mirror traps have been studied. It has been shown that, in some cases, the sound can be reflected from the axial plasma inhomogeneity. The ideal magnetohydrodynamic (MHD) model with Chew-Goldberger-Low approximation has been utilized to determine conditions of existence of the standing waves in the mirror-confined plasma. Linearized wave equation for the longitudinal plasma oscillations in thin anisotropic inhomogeneous plasma with finite β has been derived. The wave equation has been treated numerically. The oscillations are studied for the case of the trap with partially filled loss-cone and the trap with sloshing ions. It has been shown that in cells of the multiple-mirror trap standing waves can exist. The frequency of the wave is of the order of the mean bounce-frequency of ions. In the trap with sloshing ions, the mode supported by the pressure of fast ions could exist. The results of oscillations observation in the experiment on the Gas Dynamic Trap have been presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Second-harmonic generation efficiency for multifrequency ytterbium-doped fibre laser radiation

The second-harmonic generation (SHG) efficiency for cw Yb-doped fibre laser radiation, which is characterised by many longitudinal modes with random phases, is compared with the SHG efficiency for amplified single-frequency Nd : YAG laser radiation in ppLN and KTP crystals, characterised by the type-I and type-IIphase matching, respectively. It is shown that the conversion efficiency into the second harmonic in the multifrequency regime for both crystals is higher by a factor of about 1.6, a value close to the calculated enhancement (2 for the Gaussian mode statistics). This difference is explained by possible deviation of the statistics of the Yb-doped fibre laser radiation from Gaussian, which is confirmed by measurements of the laser temporal dynamics. (laser optics 2012)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phonon spectra of a two-dimensional solid dusty plasma modified by two-dimensional periodic substrates

Here, phonon spectra of a two-dimensional (2D) solid dusty plasma modulated by 2D square and triangular periodic substrates are investigated using Langevin dynamical simulations. The commensurability ratio, i.e., the ratio of the number of particles to the number of potential well minima, is set to 1 or 2. The resulting phonon spectra show that propagation of waves is always suppressed due to the confinement of particles by the applied 2D periodic substrates. For a commensurability ratio of 1, the spectra indicate that all particles mainly oscillate at one specific frequency, corresponding to the harmonic oscillation frequency of one single particle inside one potential well. At a commensurability ratio of 2, the substrate allows two particles to sit inside the bottom of each potential well, and the resulting longitudinal and transverse spectra exhibit four branches in total. We find that the two moderate branches come from the harmonic oscillations of one single particle and two combined particles in the potential well. The other two branches correspond to the relative motion of the two-body structure in each potential well in the radial and azimuthal directions. The difference in the spectra between the square and triangular substrates is attributed to the anisotropy of the substrates and the resulting alignment directions of the two-body structure in each potential well.

36 MATERIALS SCIENCE↗

Nonextensive hydrodynamics of boost-invariant plasmas

We use quasiparticle anisotropic hydrodynamics to study the non-conformal and non-extensive dynamics of a system undergoing boost-invariant Bjorken expansion. To introduce nonextensivity, we use an underlying Tsallis distribution with a time-dependent nonextensivity parameter q. By taking moments of the quasiparticle Boltzmann equation in the relaxation-time approximation, we obtain dynamical equations which allow us to determine the time evolution of all microscopic parameters including q. We compare numerical solutions for bulk observables obtained using the nonextensive evolution with results obtained using quasiparticle anisotropic hydrodynamics with a Boltzmann distribution function (q → 1). We show that the evolution of the temperature, pressure ratio, and scaled energy density, are quite insensitive to which distribution function is assumed. However, we find significant differences in the early-time evolution of the bulk pressure which are observed for even small deviations from the Boltzmann distribution function. Finally, we discuss the existence of non-conformal hydrodynamic attractors for the longitudinal and transverse pressures, the bulk and shear viscous corrections, and the nonextensivity parameter q.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A three-dimensional model of co-rotating streams in the solar wind. 2: Hydrodynamic streams

Theoretical aspects of corotating solar wind dynamics on a global scale are explored by means of numerical simulations executed with a nonlinear, inviscid, adiabatic, single-fluid, three-dimensional (3-D) hydrodynamic formulation. A simple, hypothetical 3-D stream structure is defined on a source surface located at 35 solar radius and carefully documents its evolution to 1 AU under the influence of solar rotation. By manipulating the structure of this prototype configuration at the source surface, it is possible to elucidate the factors most strongly affecting stream evolution: (1) the intrinsic correlations among density, temperature, and velocity existing near the source; (2) the amplitude of the stream; (3) the longitudinal breadth of the stream; (4) the latitudinal breadth of the stream; and (5) the heliographic latitude of the centroid of the stream.

Pizzo, V. J.↗

Development of a digital automatic control law for steep glideslope capture and flare

A longitudinal digital guidance and control law for steep glideslopes using MLS (Microwave Landing System) data is developed for CTOL aircraft using modern estimation and control techniques. The control law covers the final approach phases of glideslope capture, glideslope tracking, and flare to touchdown for automatic landings under adverse weather conditions. The control law uses a constant gain Kalman filter to process MLS and body-mounted accelerometer data to form estimates of flight path errors and wind velocities including wind shear. The flight path error estimates and wind estimates are used for feedback in generating control surface commands. Results of a digital simulation of the aircraft dynamics and the guidance and control law are presented for various wind conditions.

Halyo, N.↗

Flared landing approach flying qualities. Volume 2: Appendices

An in-flight research study was conducted utilizing the USAF/Total In-Flight Simulator (TIFS) to investigate longitudinal flying qualities for the flared landing approach phase of flight. A consistent set of data were generated for: determining what kind of command response the pilot prefers/requires in order to flare and land an aircraft with precision, and refining a time history criterion that took into account all the necessary variables and the characteristics that would accurately predict flying qualities. Seven evaluation pilots participated representing NASA Langley, NASA Dryden, Calspan, Boeing, Lockheed, and DFVLR (Braunschweig, Germany). The results of the first part of the study provide guidelines to the flight control system designer, using MIL-F-8785-(C) as a guide, that yield the dynamic behavior pilots prefer in flared landings. The results of the second part provide the flying qualities engineer with a derived flying qualities predictive tool which appears to be highly accurate. This time-domain predictive flying qualities criterion was applied to the flight data as well as six previous flying qualities studies, and the results indicate that the criterion predicted the flying qualities level 81% of the time and the Cooper-Harper pilot rating, within + or - 1%, 60% of the time.

Weingarten, Norman C.↗

A finite-element-based perturbation model for the rotordynamic analysis of shrouded pump impellers: Part 2: User's guide

This report describes the computational steps involved in executing a finite-element-based perturbation model for computing the rotor dynamic coefficients of a shrouded pump impeller or a simple seal. These arise from the fluid/rotor interaction in the clearance gap. In addition to the sample cases, the computational procedure also applies to a separate category of problems referred to as the 'seal-like' category. The problem, in this case, concerns a shrouded impeller, with the exception that the secondary, or leakage, passage is totally isolated from the primary-flow passage. The difference between this and the pump problem is that the former is analytically of the simple 'seal-like' configuration, with two (inlet and exit) flow-permeable stations, while the latter constitutes a double-entry / double-discharge flow problem. In all cases, the problem is that of a rotor clearance gap. The problem here is that of a rotor excitation in the form of a cylindrical whirl around the housing centerline for a smooth annular seal. In its centered operation mode, the rotor is assumed to give rise to an axisymmetric flow field in the clearance gap. As a result, problems involving longitudinal or helical grooves, in the rotor or housing surfaces, go beyond the code capabilities. Discarding, for the moment, the pre- and post-processing phases, the bulk of the computational procedure consists of two main steps. The first is aimed at producing the axisymmetric 'zeroth-order' flow solution in the given flow domain. Detailed description of this problem, including the flow-governing equations, turbulence closure, boundary conditions, and the finite-element formulation, was covered by Baskharone and Hensel. The second main step is where the perturbation model is implemented, with the input being the centered-rotor 'zeroth-order' flow solution and a prescribed whirl frequency ratio (whirl frequency divided by the impeller speed). The computational domain, in the latter case, is treated as three dimensional, with the number of computational planes in the circumferential direction being specified a priori. The reader is reminded that the deformations in the finite elements are all infinitesimally small because the rotor eccentricity itself is a virtual displacement. This explains why we have generically termed the perturbation model the 'virtually' deformable finite-element category. The primary outcome of implementing the perturbation model is the tangential and radial components, F(sub theta)(sup *) and F(sub r)(sup *) of the fluid-exerted force on the rotor surface due to the whirling motion. Repetitive execution of the perturbation model subprogram over a sufficient range of whirl frequency ratios, and subsequent interpolation of these fluid forces, using the least-square method, finally enable the user to compute the impeller rotor dynamic coefficients of the fluid/rotor interaction. These are the direct and cross-coupled stiffness, damping, and inertia effects of the fluid/rotor interaction.

Baskharone, Erian A.↗

Development of Three-Dimensional Flow Code Package to Predict Performance and Stability of Aircraft with Leading Edge Ice Contamination

In the work reported herein, a simplified, uncoupled, zonal procedure is utilized to assess the capability of numerically simulating icing effects on a Boeing 727-200 aircraft. The computational approach combines potential flow plus boundary layer simulations by VSAERO for the un-iced aircraft forces and moments with Navier-Stokes simulations by NPARC for the incremental forces and moments due to iced components. These are compared with wind tunnel force and moment data, supplied by the Boeing Company, examining longitudinal flight characteristics. Grid refinement improved the local flow features over previously reported work with no appreciable difference in the incremental ice effect. The computed lift curve slope with and without empennage ice matches the experimental value to within 1%, and the zero lift angle agrees to within 0.2 of a degree. The computed slope of the un-iced and iced aircraft longitudinal stability curve is within about 2% of the test data. This work demonstrates the feasibility of a zonal method for the icing analysis of complete aircraft or isolated components within the linear angle of attack range. In fact, this zonal technique has allowed for the viscous analysis of a complete aircraft with ice which is currently not otherwise considered tractable.

Aircraft icing↗