Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIGNIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Biomass Recalcitrance in Willow Under Two Biological Conversion Paradigms: Enzymatic Hydrolysis and Anaerobic Digestion

Biomass recalcitrance, the inherent resistance of plants towards deconstruction, negatively affects the viability of biorefineries. This trait is not only dictated by the properties of the biomass but also by the conversion system used and its interactions with specific features of the biomass. Here, biomass recalcitrance to anaerobic digestion (AD) was assessed using a biomethanation potential (BMP) assay. Plant material (n = 94) was selected from a large population of natural Salix viminalis accessions, previously evaluated for biomass recalcitrance using hydrothermal pretreatment-enzymatic hydrolysis. Correlations between yields from the two biological conversion systems were evaluated, as well as the influence of biomass compositional features, analyzed by pyrolysis-molecular beam mass spectrometry (py-MBMS), and other biomass physical properties on conversion performance. BMP values averaged 198.0 Nml CH 4 /g biomass after 94 days, ranging from 28.6 to 245.9. S lignin and carbohydrate-derived spectral features were positively correlated with performance under both systems, whereas G lignin, p-coumaric acid, and ferulic acid-derived ions were negatively correlated with yields and rates. Most spectral features were more strongly correlated with enzymatic hydrolysis yields compared to methane production. For early-stage methane production and rate, recalcitrance factors were similar compared to enzymatic hydrolysis, with weaker correlations observed at later timepoints. The results suggest that although variation in methane potential was considerably lower than enzymatic hydrolysis yields, a reduced recalcitrance under this system will still be of importance to improve early conversion rates. Spectral features of low methane-producing samples indicate the presence of inhibitory substances, warranting further study.

59 BASIC BIOLOGICAL SCIENCES↗

Cellulose regulated lignin/cellulose-based carbon materials with hierarchical porous structure for energy storage

Lignin has gained extensive attention as an ideal carbon precursor due to its abundance and high carbon content. However, the agglomeration of lignin and additional corrosive and unrecyclable reagents in direct pyrolysis still limit the development of lignin-based porous carbons. Herein, a facile and eco-friendly strategy was proposed to fabricate hierarchical porous lignin/cellulose-based carbon materials (LCs). In the process, cellulose nanofibrils acted as the skeleton of the bio-aerogels, which supported lignin and benefit the preparation of the LCs. Moreover, the specific surface area and the graphitization degree of LCs can be regulated by varying the cellulose content. Without activation, the bio-based carbon material (LC30) had a high specific surface area of 1770 m 2 g –1 , which displayed high specific capacitance of 216.2 F g –1 at the current density of 0.5 A g –1 . The supercapacitor based on LC30 also showed outstanding energy density of 12.3 Wh kg –1 at the power density of 50 W kg –1 . The sustainable raw material, simple and harmless preparation process, and remarkable electrochemical performance enable LC30, a promising supercapacitor electrode for energy storage.

25 ENERGY STORAGE↗

Facilitating enzymatic hydrolysis with a novel guaiacol-based deep eutectic solvent pretreatment

In this work, we established a novel deep eutectic solvent (DES) using lignin-derived guaiacol as hydrogen bond donor (HBD). The sole ChCl/guaiacol system was found to be inefficient for the fractionation of wheat straw (WS), while the incorporation of trace AlCl 3 significantly facilitated the degradation of hemicellulose and lignin, resulting in a complete enzymatic digestibility of the pretreated WS. Further, this study revealed that the DES-degraded lignin was readily precipitated during the washing process, and thus hindered the enzymatic hydrolysis of poplar and bamboo (with hydrolysis yield of 42.03% and 71.67%, respectively). Alkali washing offers a possible approach to remove the precipitated lignin, after which a near 100% hydrolysis yield was also obtained for poplar and bamboo.

59 BASIC BIOLOGICAL SCIENCES↗

Investigation of Cyrene organosolv fractionation of softwood biomass and alkaline post-incubation

Cyrene organosolv fractionation effectively extracted 78% of lignin from recalcitrant softwood biomass pine at a mild temperature of 120°C. However, the enzymatic conversion of the fractionated cellulose-rich solid did not improve significantly. Alkali post-incubation of the fractionated cellulose fraction notably enhanced the glucan conversion. This phenomenon has also been observed in other organosolv processes, but how this approach transforms pretreated biomass has not yet been comprehensively investigated. In this study, small-angle X-ray scattering (SAXS) was employed to understand the structural changes in biomass during fractionation and post-incubation at the nanometer scale. Further, no lignin aggregation was found on the microfibrils, whereas the distance between the microfibrils increased after pretreatment and decreased after alkaline post-incubation. These results suggests that the Cyrene molecules remained between the microfibrils and were removed by post-incubation. In addition, the pine lignin recovered after pretreatment was characterized by NMR to understand the impact of Cyrene pretreatment on the lignin structure.

09 BIOMASS FUELS↗

The transport of monomers during lignification in plants: anything goes but how?

Lignin is a highly abundant polymer in plant cell walls that is essential for land plants’ ability to stand upright and transport water. Inside plant cells, lignin monomers, called monolignols, are made from phenylalanine via a multistep pathway. In the cell wall, monomers move freely, until they encounter stationary oxidative enzymes that determine where the lignin polymer forms. However, it remains unclear how lignin monomers are trafficked from inside the cell to the cell wall. Although multiple lines of circumstantial evidence implicate transporters, additional possible mechanisms include the diffusion of monomers across lipid bilayers and the release of monolignol glucosides stored in vacuoles. There are therefore potentially diverse and overlapping mechanisms of monolignol export.

59 BASIC BIOLOGICAL SCIENCES↗

Effects of the advanced organosolv pretreatment strategies on structural properties of woody biomass

Plants have evolved their lignocellulosic cell walls through complex structural and chemical mechanisms to protect itself against microbial attacks, which makes native lignocellulosic biomass recalcitrant to enzymatic deconstruction. Pretreatment is a crucial step in the biological conversion of biomass as it can render structural changes in the plant cell wall to reduce the biomass recalcitrance, thus enhancing its sugar release performance. There have been many efforts to develop effective pretreatment technologies to overcome the biomass recalcitrance with a primary focus on the efficient conversion of biomass carbohydrates to liquid fuels, while lignin is significantly underutilized despite its bulk amount and high-value opportunities. In this study, the effects of two recent organosolv pretreatment strategies, co-solvent enhanced lignocellulosic fractionation (CELF) and γ-Valerolactone (GVL) pretreatments, on physicochemical properties of poplar were investigated and compared with the effects of conventional ethanol organosolv pretreatment. Diverse physicochemical properties of biomass including chemical compositions, molecular weights of cellulose and lignin, aromatics and inter-unit linkages of lignin, lignin hydroxyl group contents, cellulose crystallinity, and accessible surface area of cellulose were analyzed before and after pretreatments. The results revealed how each organic solvent pretreatment system affected biomass structural characteristics and recalcitrance.

Meng, Xianzhi↗

A kinetic study of the fast micro-pyrolysis of hybrid poplar

Here, hybrid poplar from the clone DN34 was studied to determine the rate of production of bio-oil species with respect to time during the fast pyrolysis process. 300–660 ug samples were pyrolyzed using a micropyrolzer at 500 °C at very high heating rates and very short vapor residence times. Individual poplar samples were run in triplicate at discrete time points ranging from 1 to 20 s in the micropyrolzer. Several bio-oil compounds from each individual sample were analyzed using GC/MS. Select bio-oil compounds, derived from the hemicellulose, cellulose, and lignin fractions of the wood, were used to determine their rates of production from thermal degradation of the biomass. These rates were quantified using standards to determine the weight percent relative to the original raw biomass with respect to time. Pyrolysis kinetic reaction models were fit to this experimental data in order to determine suitability of each model. A first order exponential decay model for degradation of the solid biomass was fit against the data along with a six-step consecutive degradation model previously developed by our group. The experimental data suggests that compounds derived from the hemicellulose are produced at faster rates than that of the lignin or cellulose fractions of the wood, consistent with prior data from thermogravimetric analysis (TGA). When applying the first order exponential decay model, the reaction rates calculated did prove that holocellulose compounds reaction rates were approximately twice that of the lignin compounds reaction rate but did not provide the best fit. The six-step degradation model provided a better fit to all of the biooil compounds and char data, and the stoichiometric parameters derived from the model fit showed that the first three reactions involved mostly the hemicellulose derived compounds while reaction steps 4–6 released cellulose- and lignin-derived compounds.

09 BIOMASS FUELS↗

Upconversion of non-recycled MSW paper fractions into biochar via slow pyrolysis and life cycle analysis: Pathways to net negative GHG emission

This study presents an integrated and sustainable approach to valorizing non-recycled municipal solid waste (MSW), a heterogeneous and underutilized waste stream destined for landfilling, by converting it into valuable biochar resources. Specifically, we investigated the upcycling of nonrecycled paper waste based on compositional analysis into four major fractions: high cellulose, high lignin, high contamination, and high ash content papers. These fractions were then homogenized and subjected to slow pyrolysis. The high cellulose fraction (36.1 %) was the most abundant, and contained 66.7 % cellulose, while the high lignin fraction showed the highest lignin (12.1 %) and carbon content (44 %), resulting in highest energy value of 17.4 MJ kg −1 . Biochar yields ranged from 25.6 % to 35.6 %, with the high ash fraction producing the highest yield and alkalinity (pH ≈ 11.2) due to its higher mineral content. Elemental analysis revealed enhanced carbon content up to 76.9 % and reduced oxygen and hydrogen, confirming effective carbonization. The high lignin-derived biochar showed the highest aromatic carbon content (82.8 %) and greater structural stability, while contaminated and ash-rich fractions exhibited dense, low-porosity surfaces due to the presence of contaminants and minerals. Spectroscopic analysis revealed degradation of carbohydrates, disappearance of cellulose peaks and formation of aromatic and mineral derived phases. The scaled life cycle process yielded a global warming potential (GWP) of 119.3 kg CO 2 -eq per ton of dry paper waste, offset by soil carbon sequestration of − 556.41 kg CO 2 -eq, resulting in a net impact of − 427.36 kg CO 2 -eq. This represents a net carbon removal exceeding by ~186 % the emissions associated with landfilling paper waste with electricity generation.

09 BIOMASS FUELS↗

Organic amendments change soil organic C structure and microbial community but not total organic matter on sub-decadal scales

Organic C has many benefits for soil, but it is depleted by tillage and crop harvest, and especially so for biofuel crops. Accordingly, strategies such as partially retaining stover or planting a cover crop can help ameliorate the negative effect of C removal. We used a long-term field experiment to study the impacts of stover retention and planting cover crop on soil organic matter (SOM), its extractable components and the soil microbial community. SOM chemical composition characterization was determined by electrospray ionization (ESI) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sequential water, methanol (MeOH), and chloroform (CHCl3) extracts. The characteristics of the soil bacterial community were measured by phospholipid fatty acid (PLFA), real-time quantitative PCR, and 16S rRNA gene sequence. The variations in total SOM content, total microbial biomass, and bacterial population were slight among treatments, but SOM chemical compounds, arbuscular mycorrhizal fungi (AMF) biomass, and bacterial structure changed significantly, and especially so in the coupled application of stover retention and cover crop. Specifically, stover retention enriched more lignin-like compounds in soil, whereas cover crop enriched more condensed hydrocarbons, and had more compounds with an aromaticity index (AI) >0.5. The bacterial community was not altered by the cover crop, but the corn stover retention increased the relative abundances of Myxococcales (Deltaproteobacteria) and decreased that of Actinobacteria. Redundancy analysis (RDA) further unveiled that the bacterial community in the stover treatments had significantly positive association with CHCl3-extracted chemical classes, i.e. unsaturated hydrocarbon and lipid with the coupled application (stover and cover crop), and lignin and protein with the single corn stover treatment. Taken together, our study shows how different C addition practices influence the molecular composition of SOM and the structure of soil microbial communities.

Xu, Jiangbin↗

Ectopic Production of 3,4-Dihydroxybenzoate in Planta Affects Cellulose Structure and Organization

Lignocellulosic biomass is a highly sustainable and largely carbon dioxide neutral feedstock for the production of biofuels and advanced biomaterials. Although thermochemical pretreatment is typically used to increase the efficiency of cell wall deconstruction, genetic engineering of the major plant cell wall polymers, especially lignin, has shown promise as an alternative approach to reduce biomass recalcitrance. Poplar trees with reduced lignin content and altered composition were previously developed by overexpressing bacterial 3-dehydroshikimate dehydratase (QsuB) enzyme to divert carbon flux from the shikimate pathway. In this work, three transgenic poplar lines with increasing QsuB expression levels and different lignin contents were studied using small-angle neutron scattering (SANS) and wide-angle X-ray scattering (WAXS). SANS showed that although the cellulose microfibril cross-sectional dimension remained unchanged, the ordered organization of the microfibrils progressively decreased with increased QsuB expression. This was correlated with decreasing total lignin content in the QsuB lines. WAXS showed that the crystallite dimensions of cellulose microfibrils transverse to the growth direction were not affected by the QsuB expression, but the crystallite dimensions parallel to the growth direction were decreased by ~20%. Cellulose crystallinity was also decreased with increased QsuB expression, which could be related to high levels of 3,4-dihydroxybenzoate, the product of QsuB expression, disrupting microfibril crystallization. In addition, the cellulose microfibril orientation angle showed a bimodal distribution at higher QsuB expression levels. Altogether, this study provides new structural insights into the impact of ectopic synthesis of small-molecule metabolites on cellulose organization and structure that can be used for future efforts aimed at reducing biomass recalcitrance.

59 BASIC BIOLOGICAL SCIENCES↗

Increasing the Carbohydrate Output of Bamboo Using a Combinatorial Pretreatment

Bamboo represents a family of highly lignified biomass with significant resistance to cellulolytic enzyme degradation, and typically, a severe thermochemical pretreatment is needed to overcome its recalcitrance for producing fermentable sugars. Combinatorial pretreatments with a low holding temperature and low alkali dosage were investigated in this study in an attempt to remove the impediments to the accessibility of bamboo cellulose to enzymes and enable the efficient conversion of hemicellulose. Upon autohydrolysis at 180 °C, more than half of the hemicellulose (~58%) was solubilized, contributing to further delignification in the subsequent dilute alkali extraction (DAE). The solubilized hemicellulose mainly existed in the form of soluble xylan, which, after a novel endo-β-1,4-xylanase hydrolysis, generated a large amount of xylo-oligosaccharides with the xylobiose and xylotriose proportion reaching 72.99%. After the fractionation with combinatorial pretreatments, cellulose and xylose enzymatic hydrolysis yields were 73.36 and 86.98%, respectively, representing increments of 22.42 and 43.15% compared with the sole autohydrolysis process. Fluorescence microscopy (FM) and confocal Raman microscopy (CRM) images revealed that these dramatic improvements were caused by the deconstruction of the bamboo cell walls, including separation of the adjacent cell walls, removal of hemicellulose and lignin, migration and redistribution of lignin, and the increased exposure of cellulose. In addition, lignin chemical structure variations during the combinatorial pretreatment were analyzed with gel permeation chromatography (GPC), 2D HSQC NMR, and 31 P NMR, and the correlation between the lignin structure and enzymatic hydrolysis efficiency was investigated. In summary, this study highlighted the application of combinatorial pretreatments to maximize the carbohydrate output of bamboo and unveiled their mechanism that enabled the high-efficiency utilization of bamboo.

09 BIOMASS FUELS↗

Enhancing Enzyme-Mediated Hydrolysis of Mechanical Pulps by Deacetylation and Delignification

Alkaline induced deacetylation of the hemicellulose combined with subsequent mechanical refining enhanced the enzyme-mediated hydrolysis of pretreated corn stover. The addition of either NaOH (80 °C) or mild KOH (25 °C) to corn stover prior to mechanical refining led to greater than 80% deacetylation with the NaOH treatment also solubilizing low-molecular-weight lignin that was enriched in $β$-O-4 linkages with more than 25% and 13% of the total and surface lignin removed, respectively. Furthermore, the influence of deacetylation and delignification were further enhanced when NaOH was supplemented with 3% Na 2 SO 3 , resulting in 100% deacetylation, 34% delignification, and a >20% increase in the hydrolysis yield of the substrate xylan. A milder KOH treatment resulted in the retention of more than 95% of the lignin within the cellulose rich, water-insoluble fraction with no apparent change in the surface lignin. However, both methods resulted in enhanced xylan hydrolysis when treated with xylanases, suggesting that deacetylation had enhanced accessibility to the xylan present in the pretreated of corn stover. It was apparent that cellulose accessibility was also enhanced by partial delignification, as NaOH treatment resulted in a 65% and 43% increase in the Water Retention Value and Directed Orange dye adsorption, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing digestibility and ethanol yield of Populus wood via expression of an engineered monolignol 4-O-methyltransferase

Producing cellulosic biofuels and bio-based chemicals from woody biomass is impeded by the presence of lignin polymer in the plant cell wall. Manipulating the monolignol biosynthetic pathway offers a promising approach to improved processability, but often impairs plant growth and development. Here, we show that expressing an engineered 4-O-methyltransferase that chemically modifies the phenolic moiety of lignin monomeric precursors, thus preventing their incorporation into the lignin polymer, substantially alters hybrid aspens’ lignin content and structure. Woody biomass derived from the transgenic aspens shows a 62% increase in the release of simple sugars and up to a 49% increase in the yield of ethanol when the woody biomass is subjected to enzymatic digestion and yeast-mediated fermentation. Furthermore, the cell wall structural changes do not affect growth and biomass production of the trees. Our study provides a useful strategy for tailoring woody biomass for bio-based applications.

09 BIOMASS FUELS↗

Highly stable and tunable peptoid/hemin enzymatic mimetics with natural peroxidase-like activities

Abstract Developing tunable and stable peroxidase mimetics with high catalytic efficiency provides a promising opportunity to improve and expand enzymatic catalysis in lignin depolymerization. A class of peptoid-based peroxidase mimetics with tunable catalytic activity and high stability is developed by constructing peptoids and hemins into self-assembled crystalline nanomaterials. By varying peptoid side chain chemistry to tailor the microenvironment of active sites, these self-assembled peptoid/hemin nanomaterials (Pep/hemin) exhibit highly modulable catalytic activities toward two lignin model substrates 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 3,3’,5,5’-tetramethylbenzidine. Among them, a Pep/hemin complex containing the pyridyl side chain showed the best catalytic efficiency ( V max / K m = 5.81 × 10 −3 s −1 ). These Pep/hemin catalysts are highly stable; kinetics studies suggest that they follow a peroxidase-like mechanism. Moreover, they exhibit a high efficacy on depolymerization of a biorefinery lignin. Because Pep/hemin catalysts are highly robust and tunable, we expect that they offer tremendous opportunities for lignin valorization to high value products.

59 BASIC BIOLOGICAL SCIENCES↗

The occurrence of tricin and its derivatives in plants

Our understanding of the structure and biosynthetic pathway of lignin, a phenylpropanoid heteropolymer, continues to evolve, especially with the discovery of new lignin monomers/structural moieties such as monolignol acetate, hydroxycinnamyl aldehyde/alcohol, and p-hydroxybenzoate in the past decades. Recently, tricin has been reported as a component incorporated into monocot lignin. As a flavonoid compound widely distributed in herbaceous plants, tricin has been extensively studied due to its biological significance in plant growth as well as its potential for pharmaceutical importance. Tricin is biosynthesized as a constituent of plant secondary metabolites through a combination of phenylpropanoid and polyketide pathways. Tricin occurs in plants in either free or conjugated forms such as tricin-glycosides, tricin-lignans, and tricin-lignan-glycosides.The emergence of tricin covalently incorporated with lignin biopolymer implies the possible association of lignification and tricin biosynthesis. This review summarizes the occurrence of tricin and its derivatives in plants. Additionally, synthesis, potential application, and characterization of tricin are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Cellulose–hemicellulose interactions at elevated temperatures increase cellulose recalcitrance to biological conversion

It has been previously shown that cellulose-lignin droplets’ strong interactions, resulting from lignin coalescence and redisposition on cellulose surface during thermochemical pretreatments, increase cellulose recalcitrance to biological conversion, especially at commercially viable low enzyme loadings. However, information on the impact of cellulose–hemicellulose interactions on cellulose recalcitrance following relevant pretreatment conditions are scarce. Here, to investigate the effects of plausible hemicellulose precipitation and re-association with cellulose on cellulose conversion, different pretreatments were applied to pure Avicel® PH101 cellulose alone and Avicel mixed with model hemicellulose compounds followed by enzymatic hydrolysis of resulting solids at both low and high enzyme loadings. Solids produced by pretreatment of Avicel mixed with hemicelluloses (AMH) were found to contain about 2 to 14.6% of exogenous, precipitated hemicelluloses and showed a remarkably much lower digestibility (up to 60%) than their respective controls. However, the exogenous hemicellulosic residues that associated with Avicel following high temperature pretreatments resulted in greater losses in cellulose conversion than those formed at low temperatures, suggesting that temperature plays a strong role in the strength of cellulose–hemicellulose association. Molecular dynamics simulations of hemicellulosic xylan and cellulose were found to further support this temperature effect as the xylan–cellulose interactions were found to substantially increase at elevated temperatures. Furthermore, exogenous, precipitated hemicelluloses in pretreated AMH solids resulted in a larger drop in cellulose conversion than the delignified lignocellulosic biomass containing comparably much higher natural hemicellulose amounts. In conclusion, increased cellulase loadings or supplementation of cellulase with xylanases enhanced cellulose conversion for most pretreated AMH solids; however, this approach was less effective for solids containing mannan polysaccharides, suggesting stronger association of cellulose with (hetero) mannans or lack of enzymes in the mixture required to hydrolyze such polysaccharides.

59 BASIC BIOLOGICAL SCIENCES↗

Microstructure defines the electroconductive and mechanical performance of plant-derived renewable carbon fiber

A plant-derived lignin polymer has been sought-after as a low-cost carbon fiber (CF) precursor, but the underlying mechanisms defining CF performances are still elusive. This study revealed that both the electroconductive and mechanical performances of lignin-based CF were synergistically improved by enhancing the microstructures through modifying the lignin chemistry, which paved a pathway to holistically improve the lignin CF quality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗