Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMEDIATE STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Excitation functions for (p,x) reactions of niobium in the energy range of E p = 40–90 MeV

In this paper, a stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory’s Isotope Production Facility, to investigate the 93 Nb(p,4n) 90 Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for nat Nb(p,x) and nat Cu(p,x) reactions between 40–90 MeV, as well as 5 independent measurements of isomer branching ratios, are reported. These are useful in medical and basic science radionuclide productions at intermediate energies. The nat Cu(p,x) 56 Co, nat Cu(p,x) 62 Zn, and nat Cu(p,x) 65 Zn reactions were used to determine proton fluence, and all activities were quantified using HPGe spectrometry. Variance minimization techniques were employed to reduce systematic uncertainties in proton energy and fluence, improving the reliability of these measurements. The measured cross sections are shown to be in excellent agreement with literature values, and have been measured with improved precision compared with previous measurements. This work also reports the first measurement of the nat Nb(p,x) 82m Rb reaction, and of the independent cross sections for nat Cu(p,x) 52g Mn and nat Nb(p,x) 85g Y in the 40–90 MeV region. The effects of nat Si(p,x) 22,24 Na contamination, arising from silicone adhesive in the Kapton tape used to encapsulate the aluminum monitor foils, is also discussed as a cautionary note to future stacked-target cross section measurements. Finally, a priori predictions of the reaction modeling codes CoH, EMPIRE, and TALYS are compared with experimentally measured values and used to explore the differences between codes for the nat Nb(p,x) and nat Cu(p,x) reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

tert -Butyl peroxy radical: ground and first excited state energetics and fundamental frequencies

Alkylperoxy radicals (RO 2 ˙) are key intermediates in combustion and atmospheric oxidation processes. As such, reliable detection and monitoring of these radicals can provide a wealth of information about the underlying chemistry. The tert-butyl peroxy radical is the archetypal tertiary peroxy radical, yet its vibrational spectroscopy is largely unexplored. To aid in future experimental investigations, we have performed high-level theoretical studies of the fundamental vibrational frequencies of the ground- and first excited states. A conformer search on both electronic surfaces reveals single minimum-energy structures. We predict an à 2 A' ← X 2 A" adiabatic excitation energy of 7738 cm -1 via focal point analysis, approximating the CCSDT(Q)/CBS level of theory. This excitation energy agrees to within 17 cm -1 of the most accurate experimental measurement. We compute CCSD(T) fundamental vibrational frequencies via second-order vibrational perturbation theory (VPT2), using a hybrid force field in which the quadratic (cubic/quartic) force constants are evaluated with the ANO1 (ANO0) basis set. Anharmonic resonance polyads are treated with the VPT2 + K effective Hamiltonian approach. Among the predicted fundamental frequencies, the ground state O–O stretch, excited state O–O stretch, and excited state C–O–O bend fundamentals are predicted at 1138, 959, and 490 cm -1 , respectively. Basis set sensitivity is found to be particularly great for the O–O stretches, similar to what has already been noted in smaller, unbranched peroxy radicals. Exempting these O–O stretches, agreement with the available experimental fundamentals is generally good (±10 cm -1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ensembles of Metastable States Govern Heterogeneous Catalysis on Dynamic Interfaces

Heterogeneous catalysis is at the heart of chemical industry. Being able to tune and design efficient catalysts for processes of interest is of an utmost importance, and for this, the molecular-level understanding of heterogeneous catalysts is the first step, and indeed a prime focus of the modern catalysis research. For a long time, a single most thermodynamically stable structure of the catalytic interface attained in reaction conditions had been envisioned as the reactive phase. However, some catalytic interfaces continue to undergo structural dynamics in the steady state, triggered by high temperatures, pressures, and binding and changing reagents. Among particularly dynamic interfaces are such widely-used catalysts as crystalline and amorphous surfaced supporting (sub-)nano metallic clusters. Recently, it became clear that this dynamic fluxionality causes the supported clusters to populate many distinct structural and stoichiometric states in catalytic conditions. Hence, the catalytic interface should be viewed as an evolving statistical ensemble of many (not one) structures. As such, every member in the ensemble contributes to the properties of the catalyst differently, and in proportion to its probability to be populated. This new notion flips the established paradigm and calls for new theory, modeling approaches, operando measurements, and updated design strategies. The statistical ensemble nature of surface-supported sub-nano cluster catalysts can be exemplified by oxide-supported and adsorbate-covered Pt, Pd, Cu, CuPd clusters, catalytic toward oxidative and non-oxidative dehydrogenation. They have access to a variety of 3D and quasi-2D shapes. The compositions of their thermal ensembles are dependent on the cluster size, leading to size-specific catalytic activities and the famous “every atom counts” phenomenon. The support and adsorbates affect catalyst structures, and state of the reacting species causes the ensemble to change in every reaction intermediate. The most stable member of the ensemble dominates the thermodynamic properties of the corresponding intermediate, whereas the kinetics can be determined by more active but less populated metastable catalyst states, and that suggests that many earlier studies might have overlooked the actual active sites. Both effects depend on the relative time-scales of catalyst restructuring and reaction dynamics. The catalyst may routinely operate off-equilibrium. Ensemble phenomena lead to surprising exceptions from established rules of catalysis, such as scaling relations, and Arrhenius behavior. Catalyst deactivation is also an ensemble property, and its extent of mitigation can be predicted through the new paradigm. These findings were enabled by advances in theory, such as global optimization and subsequent utilization of multiple local minima, and pathways sampling, as well as operando catalyst characterization. The fact that the per-site and per-species resolution is needed for the description and predicting of catalyst properties gives theory the central role in catalysis research, as most experiments provide ensemble-average information and cannot detect the crucial minority species that may be responsible for the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quasistationary resonances induced by intense infrared fields in HD{sup +} and their decay

The nature of a few low-lying laser-induced resonances of HD{sup +} along with their linewidths due to dissociation, has been investigated in the intensity range of (1-6) x10{sup 13}W/cm{sup 2} for three different laser frequencies. In the length gauge representation of the interaction Hamiltonian used by us, these resonances for the lower intensities are basically the vibrational states of the unperturbed molecule, shifted and broadened by radiative interactions. At higher intensities the resonances are obtained as quasistationary states on different adiabatic potentials. They are formed by the mixing of various unperturbed vibrational states by multiphoton interactions. In this mixing, the proportion of vibrational states further away from the resonance energy increases with the increase in intensity. At high enough intensities, signature of dissociation through a nonresonant intermediate vibrational transition to the v=6 and v=7 state is observed for a laser frequency of 12 500 cm{sup -1}. The width of the lowest resonance increases sharply with intensity, while its shift from the v=0 state increases only linearly with intensity. The branching ratios to different photon absorption channels change with intensity and they can be interpreted using the adiabatic potential curves. For a frequency of 2000 cm{sup -1}, which is close to the frequency of v=0 to v=1 transition, the resonances arise from the mixing of various vibrational levels through stepwise transitions, resulting in a dissociation linewidth larger compared to that obtained for higher frequencies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Study of diatomic molecules. 2: Intensities

The theory of perturbations, giving the diatomic effective Hamiltonian, is used for calculating actual molecular wave functions and intensity factors involved in transitions between states arising from Hund's coupling cases a,b, intermediate a-b, and c tendency. The Herman and Wallis corrections are derived, without any knowledge of the analytical expressions of the wave functions, and generalized to transitions between electronic states with whatever symmetry and multiplicity. A general method for studying perturbed intensities is presented using primarily modern spectroscopic numerical approaches. The method is used in the study of the ScO optical emission spectrum.

Femenias, J. L.↗

Improvement in the Crystallographic Phase Content and Superconducting Properties of Mechanically Alloyed MgB{sub 2}

In this paper, the results of the superconductivity evaluation of MgB{sub 2} intermetallic-based superconducting materials prepared through mechanical alloying are reported. The formation of the MgB{sub 2} intermetallic phase took place through an intermediate phase reaction at the solid-state reaction temperature, which tends to favor single-phase materials. The annealing of mechanically milled Mg and B powders resulted in the highest mass fraction of MgB{sub 2} observed in this study, reaching more than 90% after annealing at 900 °C for 1 h. At that point, there were still second phases present consisting of Mg, MgO, and Fe{sub 2}B. Improved superconducting properties were obtained in samples sintered at temperatures of 850 °C and 900 °C that had a low resistivity, low critical temperature gap values, and a high residual resistivity ratio (RRR).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-situ DRIFTS measurements for the mechanistic study of NO oxidation over a commercial Cu-CHA catalyst

We report a mechanistic DRIFTS in-situ study of NO 2 , NO + O 2 and NO adsorption on a commercial Cu-CHA catalyst for NH 3 -SCR of NO x . Both pre-reduced and pre-oxidized catalyst samples were investigated with the aim of clarifying mechanistic aspects of the NO oxidation to NO 2 as a preliminary step towards the study of the Standard SCR reaction mechanism at low temperatures. Nitrosonium cations (NO + , N formal oxidation state = +3) were identified as key surface intermediates in the process of NO (+2) oxidation to NO 2 (+4) and nitrates (+5). While NO + and nitrates were formed simultaneously upon catalyst exposure to NO 2 , nitrates evolved consecutively to NO + when the catalyst was exposed to NO + O 2 , suggesting that nitrite-like species, and not NO 2 , are formed as the primary products of the NO oxidative activation over Cu-CHA. Upon catalyst exposure to NO only, i.e. in the absence of gaseous O 2 , NO + and then nitrates were formed on a pre-oxidized sample but not on a pre-reduced one, which demonstrates the red-ox nature of the NO oxidation mechanism. The negative effect of H 2 O on NO + and nitrates formation was also clearly established. Assuming Cu dimers as the active sites for NO oxidation to NO 2 , we propose a mechanism which reconciles all the experimental observations. Specifically, we show that such a mechanism also explains the observed kinetic effects of H 2 O, O 2 and NO 2 on the NO oxidation activity of the investigated Cu zeolite catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New operando method for quantifying the relative half-cycle rates of the NO SCR redox cycle over Cu-exchanged zeolites

An operando experimental method for monitoring relative variations in half-cycle rates of the Cu redox-cycle model of selective-catalytic-reduction (SCR) is demonstrated, along with a kinetic model for predicting the same. Conversion inflections (CI) can occur at SCR onset within Cu/SCR catalysts; transient CI involves initial conversion growth to an intermediate value greater than exists at steady state (SS) before degrading to the SS value. While similar CI has been reported for Fe/SCR catalysts as being due to NH 3 inhibition, Cu/SCR CI is inconsistent with a similar origin. Rather, Cu/SCR CI is due to imbalances in the redox-half-cycle rates, and will occur when reduction is faster than oxidation. The temporal CI shape varies with the redox-cycle kinetic parameters and model formulation, and can be used to study the same. Here, we demonstrate the first measurements of dynamic half-cycle rate balancing at SCR onset, use CI and onset transients to study variations in half-cycle rates under Standard, Fast and NO 2 SCR, and present the first redox-cycle model showing CI. The new operando method and model provides a basis for better understanding the SCR redox process, and determining the individual half-cycles kinetic model formulation and parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helical spin ordering in room-temperature metallic antiferromagnet Fe 3 Ga 4

Metallic Fe 3 Ga 4 displays a complex magnetic phase diagram that supports an intermediate antiferromagnetic (AFM) helical spin structure (HSS) state at room temperature which lies between two ferromagnetic (FM) phases. Here, magnetic measurements along the three crystallographic axes were performed in order to develop a model for the temperature and field dependence of the HSS state. These results show that the AFM state is a helically ordered spiral propagating along the c-axis with the magnetic moments rotating in the ab-plane. Under applied magnetic field, the AFM state exhibits a metamagnetic transition to conical ordering before entering a fully field-polarized FM state at high fields. The conical ordering in the AFM state is anisotropic even within the ab-plane and may gives rise to Berry phase effects in transport measurements. Metallic conductivity from density of states computations was confirmed through resistivity measurements and no anomalous behavior was observed through the various magnetic transitions.

36 MATERIALS SCIENCE↗

Single-Atom Alloy Catalysis

Single-Atom Alloys (SAAs) play an increasingly significant role in the field of single-site catalysis and are typically composed of catalytically active elements atomically dispersed in more inert, but more catalytically selective host metals. SAAs have been shown to catalyze a range of industrially important reactions in thermal, photo- and electro-catalysis studies. Due to the unique geometry of SAAs, the location of the transition state and the binding site of reaction intermediates are often decoupled, which can enable both facile dissociation of reactants and weak binding of intermediates, two key factors for efficient and selective catalysis. Often, this results in deviations from transition metal scaling relationships that limit conventional catalysts. SAAs also offer reduced susceptibility to CO poisoning, cost savings from reduced precious metal usage, opportunities for bifunctional mechanisms via spillover, and higher resistance to deactivation by coking that plagues many industrial catalysts. In this review, we begin by introducing SAAs and describe how model systems and real catalysts can be prepared and characterized. Finally, we then review all available SAA literature on a per reaction basis before concluding with a description of the general properties of this new class of heterogeneous catalysts and presenting opportunities for future research and development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The role of Sb in solar cell material Cu 2 ZnSnS 4

In this paper, based on first-principles calculations we report a possible mechanism of the efficiency improvement of the Sb-doped Cu 2 ZnSnS 4 (CZTS) solar cells from the Sb-related defect point of view. Different from Sb in CuInSe 2 which substituted the Cu atomic site and acted as group-13 elements on the Cu-poor growth condition, we find out that Sb prefers to substitute Sn atomic site and acts as group-14 elements on the Cu-poor growth condition in CZTS. At low Sb concentration, Sb Sn produces a deep defect level which is detrimental for the solar cell application. At high Sb concentration, Sb 5s states form an isolated half-filled intermediate band at 0.5 eV above the valence band maximum which will increase the photocurrent as well as the solar cell efficiency.

14 SOLAR ENERGY↗

“W-X-M” transformations in isomerization of B{sub 39}{sup −} borospherenes

The Stone-Wales transformation plays an important role in the isomerization of fullerenes and graphenic systems. The continuous conversions between neighboring six- and seven-membered rings in the borospherene (all-boron fullerene) B{sub 40} had been discovered (Martínez-Guajardo et al. Sci. Rep. 5, 11287 (2015)). In the first axially chiral borospherenes C{sub 3} B{sub 39}{sup −} and C{sub 2} B{sub 39}{sup −}, we identify three active boron atoms which are located at the center of three alternative sites involving five boron atoms denoted as “W”, “X”, and “M”, respectively. The concerted movements of these active boron atoms and their close neighbors between neighboring six- and seven-membered rings define the “W-X-M” transformation of borospherenes. Extensive first-principles molecular dynamics simulations and quadratic synchronous transit transition-state searches indicate that, via three transition states (TS1, TS2, and TS3) and two intermediate species (M1 and M2), the three-step “W-X-M” transformations convert the C{sub 3} B{sub 39}{sup −} global minimum into its C{sub 2} isomer at room temperature (300 K) and vice versa. The maximum barriers are only 3.89 kcal/mol from C{sub 3} to C{sub 2} B{sub 39}{sup −} and 2.1 kcal/mol from C{sub 2} to C{sub 3} B{sub 39}{sup −}, rendering dynamic fluxionalities to these borospherenes. Therefore, the “W-X-M” transformation plays an important role in the borospherenes and borospherene-based nanostructures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Field and current distributions and ac losses in superconducting strips

In this paper I discuss analytic and numerical calculations of the magnetic-field and sheet-current distributions in superconducting strips of width 2a and arbitrary thickness 2b at the center when the cross-section is an ellipse, a rectangle, and a shape intermediate between these limits. Using critical-state theory, I use several methods to determine the functional dependence of the ac transport-current losses upon F=I/I{sub c}, where I is the peak alternating current and I{sub c} is the critical current, and I discuss how this dependence can be affected by the cross-sectional shape, aspect ratio, and a flux-density-dependent critical current density J{sub c}(B).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Orbital selective directional conductor in the two-orbital Hubbard model

Recently, we employed a developed many-body technique that allows for the incorporation of thermal effects, the rich phase diagram of a two-dimensional two-orbital (degenerate d xz and d yz ) Hubbard model is presented varying temperature and the repulsion U. The main result is the finding at intermediate U of an antiferromagnetic orbital selective state where an effective dimensional reduction renders one direction insulating and the other metallic. Possible realizations of this state are discussed. Additionally, we also study nematicity above the N eel temperature. After a careful finite-size scaling analysis, the nematicity temperature window appears to survive in the bulk limit, although it is very narrow.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled Fluidization, Mobility, and Clogging in Obstacle Arrays Using Periodic Perturbations

Here, we show that the clogging susceptibility and flow of particles moving through a random obstacle array can be controlled with a transverse or longitudinal ac drive. The flow rate can vary over several orders of magnitude, and we find both an optimal frequency and an optimal amplitude of driving that maximizes the flow. For dense arrays, at low ac frequencies, a heterogeneous creeping clogged phase appears in which rearrangements between different clogged configurations occur. At intermediate frequencies, a high-mobility fluidized state forms, and, at high frequencies, the system reenters a heterogeneous frozen clogged state. These results provide a technique for optimizing flow through heterogeneous media that could also serve as the basis for a particle separation method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural insights into hydrolytic defluorination of difluoroacetate by microbial fluoroacetate dehalogenases

Fluorine forms the strongest single bond to carbon with the highest bond dissociation energy among natural products. However, fluoroacetate dehalogenases (FADs) have been shown to hydrolyze this bond in fluoroacetate under mild reaction conditions. Furthermore, two recent studies demonstrated that the FAD RPA1163 fromRhodopseudomonas palustriscan also accept bulkier substrates. In this study, we explored the substrate promiscuity of microbial FADs and their ability to defluorinate polyfluorinated organic acids. Enzymatic screening of eight purified dehalogenases with reported fluoroacetate defluorination activity revealed significant hydrolytic activity against difluoroacetate in three proteins. Product analysis using liquid chromatography‐mass spectrometry identified glyoxylic acid as the final product of enzymatic DFA defluorination. The crystal structures of DAR3835 fromDechloromonas aromaticaand NOS0089 fromNostocsp. were determined in the apo‐state along with the DAR3835 H274N glycolyl intermediate. Structure‐based site‐directed mutagenesis of DAR3835 demonstrated a key role for the catalytic triad and other active site residues in the defluorination of both fluoroacetate and difluoroacetate. Computational analysis of the dimer structures of DAR3835, NOS0089, and RPA1163 indicated the presence of one substrate access tunnel in each protomer. Moreover, protein‐ligand docking simulations suggested similar catalytic mechanisms for the defluorination of both fluoroacetate and difluoroacetate, with difluoroacetate being defluorinated via two consecutive defluorination reactions producing glyoxylate as the final product. Thus, our findings provide molecular insights into substrate promiscuity and catalytic mechanism of FADs, which are promising biocatalysts for applications in synthetic chemistry and bioremediation of fluorochemicals.

Biochemistry & Molecular Biology↗

Low-energy processes of meson production in the extended Nambu–Jona-Lasinio model

The processes of meson production in electron–positron collisions at low energies are characterized within the extended Nambu–Jona-Lasinio model. It is demonstrated that intermediate vector mesons (both in the ground state and in the first radially excited one) play a critical part in these processes. The obtained results are in reasonable agreement with the available experimental data. A number of theoretical predictions are made, which can be tested experimentally in the near future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗