Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INCLUSIVE INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Vaporizable endoskeletal droplets via tunable interfacial melting transitions

Liquid emulsion droplet evaporation is of importance for various sensing and imaging applications. The liquid-to-gas phase transformation is typically triggered thermally or acoustically by low–boiling point liquids, or by inclusion of solid structures that pin the vapor/liquid contact line to facilitate heterogeneous nucleation. However, these approaches lack precise tunability in vaporization behavior. Here, we describe a previously unused approach to control vaporization behavior through an endoskeleton that can melt and blend into the liquid core to either enhance or disrupt cohesive intermolecular forces. This effect is demonstrated using perfluoropentane (C 5 F 12 ) droplets encapsulating a fluorocarbon (FC) or hydrocarbon (HC) endoskeleton. FC skeletons inhibit vaporization, whereas HC skeletons trigger vaporization near the rotator melting transition. Our findings highlight the importance of skeletal interfacial mixing for initiating droplet vaporization. Tuning molecular interactions between the endoskeleton and droplet phase is generalizable for achieving emulsion or other secondary phase transitions, in emulsions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE BSSD Performance Management Metrics Report Q2

The vision of the National Microbiome Data Collaborative (NMDC) centers on the concept of connecting data, people, and ideas to advance microbiome innovation and discovery. Building data infrastructure, while key to NMDC’s ability to execute on our vision, can only go so far in creating scientific impact. By fostering strong community partnerships and developing a set of robust community outreach and training programs, we are able to turn our products – the Submission Portal, NMDC EDGE, and the Data Portal – into tools that empower the scientific community. Our multi-pronged community building approach spans individual researchers, research teams, consortia and scientific societies, and institutions and federal agencies. To foster a collaborative and inclusive community-centered environment, we have identified three strategic objectives to promote an inclusive and connected community: (1) recognize and support the diverse research needs and perspectives of the microbiome research community; (2) promote best practices across the microbiome community, from researchers to funders, through community-driven practices (FAIR, CARE, and TRUST); and (3) build a microbiome ecosystem that enables scientific discovery and innovation across stakeholders. These strategic objectives allow our team to focus on impact across a diverse range of activities, from launching the American Society for Microbiology (ASM) Microbiome Data Prize to supporting the Ambassador and Champions programs fostering learning and building a collaborative network. We broadly communicate our work through social media (X/Twitter, LinkedIn, and Instagram), The Microbiome Standard (our quarterly newsletter), and Annual Reports. All our work is underpinned by a strong commitment to diversity, equity, and inclusion as articulated in our Action Plan that tracks progress towards key metrics. A core component of our engagement strategy is user research. User research ensures the Submission Portal, NMDC EDGE, Data Portal, and the new Field Notes mobile app are designed with and for the scientific community. Our user research efforts consist of asking researchers exploratory questions to collect information on researcher priorities, methodologies, and perceptions to ensure that we are aware of the current state of microbiome research. Our usability testing provides researchers with prototypes or test environments of the NMDC products, and we capture valuable information on how users interact with the products to make improvements. Given the diverse nature of microbiome work, we acknowledge that we are not aware of all pressing data challenges and thus rely on the research community to help us identify the most important issues to prioritize. To date, we have conducted 24 interviews and one beta-testing call with 10 participants across all NMDC products, which have generated 321 insights and 120 action items. Herein, we describe the ways we engage with the microbiome research community to advance the NMDC mission.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of Dust Properties at the Source Region During ACE-Asia

ACE (Aerosol Characterization Experiment)-Asia is designed to study the compelling variability in spatial and temporal scale of both pollution-derived and naturally-occurring aerosols, which often exist in high concentrations over eastern Asia and along the rim of the western Pacific. The phase-I of ACE-Asia was conducted from March-May 2001 in the vicinity of the Gobi desert, east coast of China, Yellow Sea, Korea, and Japan, along the pathway of Kosa (severe events that blanket East Asia with yellow desert dust, peaked in the Spring season). Asian dust typically originates in desert areas far from polluted urban regions. During transport, dust layers can interact with anthropogenic sulfate and soot aerosols from heavily polluted urban areas. Added to the complex effects of clouds and natural marine aerosols, dust particles reaching the marine environment can have drastically different properties than those from the source. Thus, understanding the unique temporal and spatial variations of Asian dust is of special importance in regional-to-global climate issues such as radiative forcing, the hydrological cycle, and primary biological productivity in the mid-Pacific Ocean. During ACE-Asia we have measured continuously aerosol optical/radiative properties, column precipitable water amount, and surface reflectivity over homogeneous areas from surface. The inclusion of flux measurements permits the determination of dust aerosol radiative flux in addition to measurements of loading and optical thickness. At the time of the Terra/MODIS overpass, these ground-based observations can provide valuable data to compare with MODIS retrievals over land. Preliminary results will be presented and discussed their implications in regional climatic effects.

Tsay, Si-Chee↗

Dust Aerosols at the Source Region During ACE-ASIA: A Surface/Satellite Perspective

ACE (Aerosol Characterization Experiment)-Asia is designed to study the compelling variability in spatial and temporal scale of both pollution-derived and naturally occurring aerosols, which often exist in high concentrations over eastern Asia and along the rim of the western Pacific. The phase-I of ACE-Asia was conducted from March-May 2001 in the vicinity of the Gobi desert, East Coast of China, Yellow Sea, Korea, and Japan, along the pathway of Kosa (severe events that blanket East Asia with yellow desert dust, peaked in the Spring season). Asian dust typically originates in desert areas far from polluted urban regions. During transport, dust layers can interact with anthropogenic sulfate and soot aerosols from heavily polluted urban areas. Added to the complex effects of clouds and natural marine aerosols, dust particles reaching the marine environment can have drastically different properties than those from the source. Thus, understanding the unique temporal and spatial variations of Asian dust is of special importance in regional-to-global climate issues such as radiative forcing, the hydrological cycle, and primary biological productivity in the mid-Pacific Ocean. During ACE-Asia we have measured continuously aerosol physical/optical/radiative properties, column precipitable water amount, and surface reflectivity over homogeneous areas from surface. The inclusion of flux measurements permits the determination of dust aerosol radiative flux in addition to measurements of loading and optical thickness. At the time of the Terra/MODIS, SeaWiFS, TOMS and other satellite overpasses, these ground-based observations can provide valuable data to compare with satellite retrievals over land. Preliminary results will be presented and discussed their implications in regional climatic effects.

Tsay, Si-Chee↗

Characterization of Dust Properties Near Source Region During ACE-Asia: A Column Satellite-Surface Perspective

Many recent field experiments are designed to study the compelling variability in spatial and temporal scale of both pollution-derived and naturally occurring aerosols, which often exist in high concentrations over eastern/southeastern Asia and along the rim of the western Pacific. For example, the ACE-Asia was conducted from March-May 2001 in the vicinity of the Taklimakan and Gobi deserts, East Coast of China, Yellow Sea, Korea, and Japan, along the pathway of Kosa (severe events that blanket East Asia with yellow desert dust, peaked in the Spring season). Asian dust typically originates in desert areas far from polluted urban regions. During transport, dust layers can interact with anthropogenic sulfate and soot aerosols from heavily polluted urban areas. Added to the complex effects of clouds and natural marine aerosols, dust particles reaching the marine environment can have drastically different properties than those from the source. Thus, understanding the unique temporal and spatial variations of Asian aerosols is of special importance in regional-to-global climate issues such as radiative forcing, the hydrological cycle, and primary biological productivity in the mid-Pacific Ocean. During ACE-Asia we have measured continuously aerosol physical/optical/radiative properties, column precipitable water amount, and surface reflectivity over homogeneous areas from surface. The inclusion of flux measurements permits the determination of aerosol radiative flux in addition to measurements of loading and optical depth. At the time of the Terra/MODIS, SeaWiFS, TOMS and other satellite overpasses, these ground-based observations can provide valuable data to compare with satellite retrievals over land. Preliminary results will be presented and discussed their implications in regional climatic effects.

Tsay, S. -C.↗

Aerosol–climate interactions in the Norwegian Earth System Model – NorESM1-M

The objective of this study is to document and evaluate recent changes and updates to the module for aerosols and aerosol–cloud–radiation interactions in the atmospheric module CAM4-Oslo of the core version of the Norwegian Earth System Model (NorESM), NorESM1-M. Particular attention is paid to the role of natural organics, sea salt, and mineral dust in determining the gross aerosol properties as well as the anthropogenic contribution to these properties and the associated direct and indirect radiative forcing. The aerosol module is extended from earlier versions that have been published, and includes life-cycling of sea salt, mineral dust, particulate sulphate, black carbon, and primary and secondary organics. The impacts of most of the numerous changes since previous versions are thoroughly explored by sensitivity experiments. The most important changes are: modified prognostic sea salt emissions; updated treatment of precipitation scavenging and gravitational settling; inclusion of biogenic primary organics and methane sulphonic acid (MSA) from oceans; almost doubled production of land-based biogenic secondary organic aerosols (SOA); and increased ratio of organic matter to organic carbon (OM/OC) for biomass burning aerosols from 1.4 to 2.6. Compared with in situ measurements and remotely sensed data, the new treatments of sea salt and dust aerosols give smaller biases in near-surface mass concentrations and aerosol optical depth than in the earlier model version. The model biases for mass concentrations are approximately unchanged for sulphate and BC. The enhanced levels of modeled OM yield improved overall statistics, even though OM is still underestimated in Europe and overestimated in North America. The global anthropogenic aerosol direct radiative forcing (DRF) at the top of the atmosphere has changed from a small positive value to -0.08 W m-2 in CAM4-Oslo. The sensitivity tests suggest that this change can be attributed to the new treatment of biomass burning aerosols and gravitational settling. Although it has not been a goal in this study, the new DRF estimate is closer both to the median model estimate from the AeroCom intercomparison and the best estimate in IPCC AR4. Estimated DRF at the ground surface has increased by ca. 60%, to -1.89 W m-2. We show that this can be explained by new emission data and omitted mixing of constituents between updrafts and downdrafts in convective clouds. The increased abundance of natural OM and the introduction of a cloud droplet spectral dispersion formulation are the most important contributions to a considerably decreased estimate of the indirect radiative forcing (IndRF). The IndRF is also found to be sensitive to assumptions about the coating of insoluble aerosols by sulphate and OM. The IndRF of -1.2 W m-2, which is closer to the IPCC AR4 estimates than the previous estimate of -1.9 W m-2, has thus been obtained without imposing unrealistic artificial lower bounds on cloud droplet number concentrations.

54 ENVIRONMENTAL SCIENCES↗

Oxidation state and coordination environment of Pb in U-bearing minerals

This study examines the oxidation and coordination of lead (Pb) in the uranium (U) minerals uraninite (UO 2 ), coffinite (USiO 4 ), and brannerite (UTi 2 O 6 ), and minerals that have U as a minor constituent, zircon (ZrSiO 4 ) and titanite (CaTiSiO 5 ). The characterization of Pb was conducted through a combination of micro-synchrotron X-ray fluorescence mapping (µSXRF) and micro-X-ray absorption spectroscopy (µXAS), collected at the Pb L II and L III edge on characterized grains (electron microscopy and X-ray diffraction) from a range of geological settings and ages. For all minerals considered in this study, Pb L II and L III X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) data indicate that Pb exists as Pb 2+ . In the case of uraninite, DFT structure optimization calculations suggest that the substitution of Pb 2+ for U 4+ is facilitated by the stereochemically active electron lone pair indicative of Pb 2+ , which effectively takes the place of an oxygen vacancy (coupled substitution Pb 2+ + = U 4+ + O 2- ). In detail, however, the EXAFS and XANES data, supported by first principle calculations of the XANES associated with Pb 2+ replacing U 4+ in the crystal lattice of uraninite, indicate that Pb 2+ is present in a less distorted coordination than suggested by DFT, which may reflect a yet to be characterized link between interstitial oxygen defects and Pb 2+ incorporation, rather than a simple oxygen vacancy. For coffinite, the XANES data demonstrate that Pb exists mainly as Pb 2+ in the form of galena, indicating limited stability of the isomorphous substitution in coffinite. In contrast, Pb is homogeneously distributed in the metamict mineral brannerite, which displays a distinct XANES spectrum suggestive of Pb 2+ bonded to oxygens in a highly distorted coordination environment. Pb L II XANES indicate that radiogenic Pb exists predominantly as Pb 2+ within the crystal lattice of zircon and as distinct mineral PbO nano-scale inclusions or domains. Additionally, Pb L II XANES measurements also indicate that Pb 2+ exists within titanite although the coordination environment is unclear. Overall, these data suggest that the previous indications of the presence of Pb 4+ in radioactive minerals need to be reconsidered. The nature of radiogenic Pb 2+ incorporation in U-bearing minerals controls the mobilization of Pb in hydrothermal fluids and the utility of a mineral as a geochronometer. The Pb valence and coordination data presented in this study provide fundamental constraints imperative for our understanding of the controls governing the mobilization of radiogenic Pb during water-rock interaction and metamorphism.

58 GEOSCIENCES↗

The Spin Structure of the Proton at Low $Q^2$: A Measurement of the Structure Function $g^2_p$

The spin structure of the nucleon has remained as one of the key points of interest in hadronic physics, which has attracted many efforts from both experimentalists and theorists. Quantum Chromodynamics (QCD) is the fundamental theory that describes the strong interaction. It has been verified in the asymptotically free region. However, the non-perturbative confinement of quarks within the nucleon is still not well understood within QCD. In the non-perturbative regime, low-energy effective field theories such as chiral perturbation theory (XPT) provide predictions for the spin structure functions. The neutron spin structure functions, gp1 and gp2 , and the proton spin structure function, gp1, have been measured over a wide kinematic range and compared with the theoretical predictions. However, the proton spin structure function, gp2, remains largely unmeasured. The E08-027 collaboration successfully performed the first measurement of the inclusive electron-proton scattering in the kinematic range 0.02 < Q2 < 0.2 GeV2. The experiment took place in experimental Hall A at Jefferson Lab in 2012. A longitudinally polarized electron beam with incident energies between 1.1 GeV and 3.3 GeV was scattered from a longitudinally or transversely polarized NH3 target. Asymmetries and polarized cross-section differences were measured in the resonance region to extract the proton spin structure functions g2. The results allow us to obtain the generalized spin polarizabilities γ0 and δLT and test the Burkhardtt-Cottingham (BC) sum rule. Chiral perturbation theory is expected to work in this kinematic range and this measurement of δLT will give a benchmark test to XPT calculations. This thesis will discuss preliminary results from the E08-027 data analysis.

74 ATOMIC AND MOLECULAR PHYSICS↗

Measurement of neutral current single π 0 production on argon with the MicroBooNE detector

We report the first measurement of π 0 production in neutral current (NC) interactions on argon with average neutrino energy of ≲1 GeV. We use data from the MicroBooNE detector’s 85-tonne active volume liquid argon time projection chamber situated in Fermilab’s Booster Neutrino Beam and exposed to 5.89 &#x00D7; 10 20 protons on target for this measurement. Measurements of NC π 0 events are reported for two exclusive event topologies without charged pions. Those include a topology with two photons from the decay of the π 0 and one proton and a topology with two photons and zero protons. Flux-averaged cross-sections for each exclusive topology and for their semi-inclusive combination are extracted (efficiency-correcting for two-plus proton final states), and the results are compared to predictions from the GENIE, NEUT, and NUWRO neutrino event generators. We measure cross sections of 1.243 ± 0.185 (syst) ±0.076 (stat), 0.444 ± 0.098 ± 0.047, and 0.624 ± 0.131 ± 0.075 [10 -38 cm 2 /Ar] for the semi-inclusive NCπ 0 , exclusive NCπ 0 +1p, and exclusive NCπ 0 +0p processes, respectively.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Properties of the solar nebula and the origin of the moon.

The basic geochemical model of the structure of the moon proposed by Anderson, in which the moon is formed by differentiation of the calcium, aluminium, and titanium-rich inclusions in the Allende meteorite, is accepted, and the conditions for formation of this moon within the solar nebula models of Cameron and Pine are discussed. The basic material condenses while iron remains in the gaseous phase, which places the formation of the moon slightly inside the orbit of Mercury. Some condensed metallic iron is likely to enter the moon in this position, and since the moon is assembled at a very high temperature, it is likely to have been fully molten, so that the iron can remove the iridium from the silicate material and carry it down to form a small core. Interactions between the moon and Mercury lead to the present rather eccentric Mercury orbit and to a much more eccentric orbit for the moon, reaching past the orbit of the earth, establishing conditions which are necessary for capture of the moon by the earth.

Cameron, A. G. W.↗

Quark fragmentation within an identified jet

We derive a factorization theorem that describes an energetic hadron h fragmenting from a jet produced by a parton i, where the jet invariant mass is measured. The analysis yields a 'fragmenting jet function' G{sub i}{sup h}(s,z) that depends on the jet invariant mass s, and on the energy fraction z of the fragmentation hadron. We show that G{sub i}{sup h} can be computed in terms of perturbatively calculable coefficients, J{sub ij}(s,z/x), integrated against standard nonperturbative fragmentation functions, D{sub j}{sup h}(x). We also show that h{integral}dzG{sub i}{sup h}(s,z) is given by the standard inclusive jet function J{sub i}(s) which is perturbatively calculable in QCD. We use soft collinear effective theory and for simplicity carry out our derivation for a process with a single jet, B{yields}Xhl{nu}, with invariant mass m{sub Xh}{sup 2}>>{Lambda}{sub QCD}{sup 2}. Our analysis yields a simple replacement rule that allows any factorization theorem depending on an inclusive jet function J{sub i} to be converted to a semi-inclusive process with a fragmenting hadron h. We apply this rule to derive factorization theorems for B{yields}XK{gamma} which is the fragmentation to a Kaon in b{yields}s{gamma}, and for e{sup +}e{sup -{yields}}(dijets)+h with measured hemisphere dijet invariant masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Influence of the Pacific quasi-decadal oscillation on the monsoon precipitation in Nepal

Nepal’s precipitation is uncorrelated with the all-India monsoon precipitation. However, the quasi-decadal variability of precipitation is significant in the Nepal Himalayas but its mechanism has received little attention. Using a set of century-long reanalysis and observations of precipitation, spectral and empirical orthogonal function analyses were conducted to determine the role of the Pacific Quasi-Decadal Oscillation (QDO) in Nepal’s precipitation regime. The dynamical and moisture processes involved in the Pacific QDO of the monsoon precipitation in Nepal were also examined. The monsoon precipitation in Nepal is enhanced when southeasterly moisture fluxes, originated from the Bay of Bengal, divert towards the north and subsequently interact with the southern Himalayan foothills. The redirected moisture fluxes are modulated through the Pacific QDO and are embedded in a propagating global wave 1–2 circulation pattern. However, the modulation exhibits a phase shift of 2 years between the precipitation anomalies in Nepal and the extreme phases of the Pacific QDO. A phase shift of this nature ascribes to the low correlation skill between the Nepal precipitation and traditional monsoon indices, such as those of the El Niño-Southern Oscillation and the all-India precipitation. The lagged relationship between the monsoon precipitation and the Pacific QDO is unique to Nepal, the inclusion of which should improve the predictive ability for the Nepal monsoon.

Meteorology & Atmospheric Sciences↗

Characterization of Dust Properties during ACE-Asia and PRIDE: A Column Satellite-Surface Perspective

Many recent field experiments are designed to study the compelling variability in spatial and temporal scale of both pollution-derived and naturally occurring aerosols, which often exist in high concentration over particular pathways around the globe. For example, the ACE-Asia (Aerosol Characterization Experiment-Asia) was conducted from March-May 2001 in the vicinity of the Taklimakan and Gobi deserts, East Coast of China, Yellow Sea, Korea, and Japan, along the pathway of Kosa (severe events that blanket East Asia with yellow desert dust, peaked in the Spring season). The PRIDE (Puerto RIco Dust Experiment, July 2000) was designed to measure the properties of Saharan dust transported across the Atlantic Ocean to the Caribbean. Dust particles typically originate in desert areas far from polluted urban regions. During transport, dust layers can interact with anthropogenic sulfate and soot aerosols from heavily polluted urban areas. Added to the complex effects of clouds and natural marine aerosols, dust particles reaching the marine environment can have drastically different properties than those from the source. Thus, understanding the unique temporal and spatial variations of dust aerosols is of special importance in regional-to-global climate issues such as radiative forcing, the hydrological cycle, and primary biological productivity in the ocean. During ACE-Asia and PRIDE we had measured aerosol physical/optical/radiative properties, column precipitable water amount, and surface reflectivity over homogeneous areas from ground-based remote sensing. The inclusion of flux measurements permits the determination of aerosol radiative flux in addition to measurements of loading and optical depth. At the time of the Terra/MODIS, SeaWiFS, TOMS and other satellite overpasses, these ground-based observations can provide valuable data to compare with satellite retrievals over land. We will present the results and discuss their implications in regional climatic effects.

Lau, William K. M.↗

Multi-Sensor Cloud and Aerosol Retrieval Simulator and Remote Sensing from Model Parameters : Aerosols - Part 2

The Multi-sensor Cloud Retrieval Simulator (MCRS) produces a simulated radiance product from any high-resolution general circulation model with interactive aerosol as if a specific sensor such as the Moderate Resolution Imaging Spectroradiometer (MODIS) were viewing a combination of the atmospheric column and land ocean surface at a specific location. Previously the MCRS code only included contributions from atmosphere and clouds in its radiance calculations and did not incorporate properties of aerosols. In this paper we added a new aerosol properties module to the MCRS code that allows users to insert a mixture of up to 15 different aerosol species in any of 36 vertical layers. This new MCRS code is now known as MCARS (Multi-sensor Cloud and Aerosol Retrieval Simulator). Inclusion of an aerosol module into MCARS not only allows for extensive, tightly controlled testing of various aspects of satellite operational cloud and aerosol properties retrieval algorithms, but also provides a platform for comparing cloud and aerosol models against satellite measurements. This kind of two-way platform can improve the efficacy of model parameterizations of measured satellite radiances, allowing the assessment of model skill consistently with the retrieval algorithm. The MCARS code provides dynamic controls for appearance of cloud and aerosol layers. Thereby detailed quantitative studies of the impacts of various atmospheric components can be controlled. In this paper we illustrate the operation of MCARS by deriving simulated radiances from various data field output by the Goddard Earth Observing System version 5 (GEOS-5) model. The model aerosol fields are prepared for translation to simulated radiance using the same model sub grid variability parameterizations as are used for cloud and atmospheric properties profiles, namely the ICA technique. After MCARS computes modeled sensor radiances equivalent to their observed counterparts, these radiances are presented as input to operational remote-sensing algorithms. Specifically, the MCARS-computed radiances are input into the processing chain used to produce the MODIS Data Collection 6 aerosol product (MOYD04). TheMOYD04 product is of course normally produced from MOYD021KM MODIS Level-1B radiance product directly acquired by the MODIS instrument. MCARS matches the format and metadata of a MOYD021KM product. The resulting MCARS output can be directly provided to MODAPS (MODIS Adaptive Processing System) as input to various operational atmospheric retrieval algorithms. Thus the operational algorithms can be tested directly without needing to make any software changes to accommodate an alternative input source. We show direct application of this synthetic product in analysis of the performance of the MOD04 operational algorithm. We use biomass-burning case studies over Amazonia employed in a recent Working Group on Numerical Experimentation (WGNE)-sponsored study of aerosol impacts on numerical weather prediction (Freitas et al., 2015). We demonstrate that a known low bias in retrieved MODIS aerosol optical depth appears to be due to a disconnect between actual column relative humidity and the value assumed by the MODIS aerosol product.

aerosol retrieval↗

Update of the nuclear criticality slide rule calculations: studies with common shielding materials - 25467

This paper presents preliminary results from the third phase of the current update to the nuclear criticality slide rule, in which MCNP, MAVRIC/Monaco, and COG have simulated the prompt neutron and photon dose from critical spheres of 4.95% enriched uranyl fluoride solution and 93.2% enriched uranium metal. New to this phase is the inclusion of various thicknesses of lead, steel, concrete, and water shielding. This phase also evaluated the effects of humidity on the unshielded configurations in the first phase, as well as the effects of changing the ground composition used in the first phase from concrete to dry soil. The small sample of results presented show that MCNP, MAVRIC/Monaco, and COG results are statistically the same or different by only a few percent. The impact of the shielding materials depends on their thickness, but doses decreased by nearly a factor of 100 are presented. In a few instances, buildup of gamma doses occurs due to neutron interactions in shielding materials. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Polarizabilities of neutral atoms and atomic ions with a noble gas electron configuration

Atomic polarizabilities play an important role in the development of force fields for molecular simulations, as well as for the development of qualitative concepts of atomic and molecular behavior. Coupled cluster theory at the coupled cluster singles doubles triples level with very large correlation-consistent basis sets with extended diffuse functions has been used to predict the polarizabilities of the atomic neutrals, mono-cations and mono-anions with a noble gas configuration. Additional corrections for scalar relativistic and spin–orbit effects were also included for the electron configurations of Kr, Xe, and Rn. The results are in excellent agreement with experiment or with other high level calculations where available. The current results for most of these species represent the best available values for the polarizabilities. The results show that the polarizability of H - is very difficult to calculate without extremely diffuse functions. The polarizability of H - is the largest value, 34.05 Å 3 , calculated for all species in the current study. The polarizabilities of the remaining halogen anions are also the best available values. The polarizabilities of the halogen anions (excluding F - ) and H - have a linear correlation with the electron affinity of the neutral atom. Spin– orbit effects, even for closed shell species, cannot be ignored for quantitative accuracy, and the inclusion of spin–orbit effects for Fr + , Rn, and At - increases the polarizability by 4%, 6%, and 15%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development and validation of HERWIG 7 tunes from CMS underlying-event measurements

This paper presents new sets of parameters (“tunes”) for the underlying-event model of the ${\textsc {herwig}} \,7$ event generator. These parameters control the description of multiple-parton interactions (MPI) and colour reconnection in ${\textsc {herwig}} \,7$, and are obtained from a fit to minimum-bias data collected by the CMS experiment at $\sqrt{s}=0.9$, 7, and $13 \,\text {Te}\text {V} $. The tunes are based on the NNPDF 3.1 next-to-next-to-leading-order parton distribution function (PDF) set for the parton shower, and either a leading-order or next-to-next-to-leading-order PDF set for the simulation of MPI and the beam remnants. Predictions utilizing the tunes are produced for event shape observables in electron-positron collisions, and for minimum-bias, inclusive jet, top quark pair, and Z and W boson events in proton-proton collisions, and are compared with data. Each of the new tunes describes the data at a reasonable level, and the tunes using a leading-order PDF for the simulation of MPI provide the best description of the data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evaluating the limitations of Bayesian metabolic control analysis

Bayesian Metabolic Control Analysis (BMCA) is a promising framework for inferring metabolic control coefficients in data-limited scenarios, combining Bayesian inference with linear-logarithmic (lin-log) rate laws. These metabolic control coefficients quantify how changes in enzyme activities affect steady-state fluxes and metabolite concentrations across a metabolic network. However, its predictive accuracy and limitations remain underexplored. This study systematically evaluates BMCA’s ability to infer elasticity values, flux control coefficients (FCC), and concentration control coefficients (CCC) under varying data availability conditions using three synthetic metabolic network models. We demonstrate that BMCA predictions are highly dependent on the inclusion of flux and enzyme concentration data, with the omission of these datasets leading to severe inaccuracies. In our synthetic, enzyme-perturbation datasets, external metabolite concentrations had minimal impact and, in some cases, their exclusion improved predictions; when external-nutrient perturbations were introduced and those concentrations were observed, gains were at most modest. Additionally, we find that posterior estimation with both ADVI and HMC can underestimate large-magnitude elasticities in our synthetic settings, with ADVI showing somewhat higher variance under strong up-regulation; thus, recovering |elasticity| ≳ 1.5 remains challenging regardless of the inference engine. ADVI also fails to accurately infer allosteric interactions, even when regulatory effects are strong. While BMCA maintains reasonable accuracy in partially recovering the rankings of the highest FCC values, its estimates of absolute values remain constrained by prior assumptions and data limitations. Our findings reveal the BMCA algorithm’s strengths and weaknesses, providing guidance on its application in metabolic engineering, and highlighting the need for methodological refinements to enhance its predictive capabilities.

59 BASIC BIOLOGICAL SCIENCES↗