Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

A Superposed Metric for Spinning Black Hole Binaries Approaching Merger

We construct an approximate metric that represents the spacetime of spinning binary black holes (BBH) approaching merger. We build the metric as an analytical superposition of two Kerr metrics in harmonic coordinates, where we transform each black hole term with time-dependent boosts describing an inspiral trajectory. The velocities and trajectories of the boost are obtained by solving the post-Newtonian (PN) equations of motion at 3.5 PN order. We analyze the spacetime scalars of the new metric and we show that it is an accurate approximation of Einstein’s field equations in vacuum for a BBH system in the inspiral regime. Furthermore, to prove the effectiveness of our approach, we test the metric in the context of a 3D general relativistic magnetohydrodynamical (GRMHD) simulation of accreting minidisks around the black holes. We compare our results with a previous well-tested spacetime construction based on the asymptotic matching method. We conclude that our new spacetime is well-suited for long-term GRMHD simulations of spinning binary black holes on their way to the merger.

Luciano Combi↗

Ultrafast optical control of terahertz surface plasmons in subwavelength hole-arrays at room temperature

Extraordinary optical transmission through subwavelength metallic hole-arrays has been an active research area since its first demonstration. The frequency selective resonance properties of subwavelength metallic hole arrays, generally known as surface plasmon polaritons, have potential use in functional plasmonic devices such as filters, modulators, switches, etc. Such plasmonic devices are also very promising for future terahertz applications. Ultrafast switching or modulation of the resonant behavior of the 2-D metallic arrays in terahertz frequencies is of particular interest for high speed communication and sensing applications. In this paper, we demonstrate optical control of surface plasmon enhanced resonant terahertz transmission in two-dimensional subwavelength metallic hole arrays fabricated on gallium arsenide based substrates. Optically pumping the arrays creates a conductive layer in the substrate reducing the terahertz transmission amplitude of both the resonant mode and the direct transmission. Under low optical fluence, the terahertz transmission is more greatly affected by resonance damping than by propagation loss in the substrate. An ErAs:GaAs nanoisland superlattice substrate is shown to allow ultrafast control with a switching recovery time of {approx}10 ps. We also present resonant terahertz transmission in a hybrid plasmonic film comprised of an integrated array of subwavelength metallic islands and semiconductor holes. A large dynamic transition between a dipolar localized surface plasmon mode and a surface plasmon resonance near 0.8 THz is observed under near infrared optical excitation. The reversal in transmission amplitude from a stopband to a passband and up to {pi}/2 phase shift achieved in the hybrid plasmonic film make it promising in large dynamic phase modulation, optical changeover switching, and active terahertz plasmonics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Process and structures for fabrication of solar cells with laser ablation steps to form contact holes

Contact holes of solar cells are formed by laser ablation to accomodate various solar cell designs. Use of a laser to form the contact holes is facilitated by replacing films formed on the diffusion regions with a film that has substantially uniform thickness. Contact holes may be formed to deep diffusion regions to increase the laser ablation process margins. The laser configuration may be tailored to form contact holes through dielectric films of varying thickness.

14 SOLAR ENERGY↗

Robust Ceramic Coaxial Cable Down-Hole Sensors for Long-Term In Situ Monitoring of Geologic CO 2 Injection and Storage

Energy generation by use of fossil fuels produces large volumes of CO 2 and other greenhouse gases, whose accumulation in the atmosphere is widely seen as undesirable. CO 2 Capture followed by sequestration has been identified as the solution. Subsurface geologic formations offer a potential location for long-term storage of CO 2 because of their requisite size. Unfortunately, the inaccessibility and complexity of the subsurface, the wide range of scales of variability, and the coupled nonlinear processes, impose tremendous challenges to determine the transport and predict the fate of the stored CO 2 . Among the various monitoring approaches, in situ down-hole monitoring of the various state parameters provides critical and direct data points that can be used to validate the models, optimize the injection, detect leakage and track the CO 2 plume. However, down-hole sensors that can withstand the harsh conditions and operate over decades of the project lifecycle remain unavailable. Given that the widespread of carbon capture and storage will be the necessity and reality in the future, fundamental and applied research is required to address the significant challenges and technological gaps in lack of long-term reliable down-hole sensors This project focused on the development and demonstration of a novel, low-cost, distributed, robust ceramic coaxial cable sensor platform for in situ down-hole monitoring of geologic CO 2 injection and storage with high spatial and temporal resolutions. The coaxial cable Fabry-Perot interferometer (CCFPI) has been studied as a general sensor platform for in situ, long-term, measurement of temperature, pressure and strain, which are critical to CO 2 injection and storage. A novel signal processing scheme has been developed and demonstrated for dense multiplexing of the sensors for low-cost distributed sensing with high spatial resolution. The developed temperature, pressure and strain sensors have been extensively tested under laboratory conditions that are similar to the downhole CO 2 storage environment, showing excellent capability for in situ monitoring the various parameters that are important to model, optimize the injection, detect leakage and track the CO 2 plume. In addition, the interactions between the sensor datum and the geological models have been investigated in details for the purposes of model validation, guiding sensor installation/placement, enhancement of model prediction capability and optimization of the injection processes. This project has resulted in the successful development of new ceramic coaxial cable based sensor systems that can monitor directly the changes in pressure, temperature, and strain caused by increased reservoir pressure and reduced reservoir temperature due to the supercritical CO 2 injection. Integrated with geological models, the sensors and measurement data can improve the possibility to identify plume movement and leakage in the cap rock and wells with higher precision and more accuracy. The low cost, ease of deployment, small size and dense multiplexing features of the new sensing technology will allow a large number of sensors to be deployed to address the objective to demonstrate that 99% of the CO 2 remains in the injection zone.

01 COAL, LIGNITE, AND PEAT↗

Experimentally, How Dark Are Black Hole Mergers?

The first Advanced LIGO observing run detected two black hole merger events with confidence and likely a third. Many groups organized to followup the events in the optical even though the strong theoretical prior that no optical emission should be seen. We carry through the logic of this by asking about the experimental upper limits to the optical light from Advanced LIGO black hole mergere events. We inventory the published optical searches for transient events associated with the black hole mergers. We describe the factors that go into a formal limit on the visibility of an event (sky area coverage, the coverage factor of the camera, the fraction of sky not covered by intervening objects), and list what is known from the literature of the followup teams quantitative assessment of each factor. Where possible we calculate the total probability from each group that the source was imaged. The calculation of confidence level is reviewed for the case of no background. We find that an experimental 95% upper limit on the magnitude of a black hole requires the sum of the total probabilities over all events to be more than 3. In the first Advanced LIGO observing run we were far from reaching that threshold.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A Microlensing Search for Primordial Black Holes in Dark Energy Survey Date

The search for dark matter is currently one of the most exciting fields in astronomy. One possible candidate for dark matter is primordial black holes, formed from density fluctuations at the beginning of the universe. We search for these black holes through microlensing events by creating light curves from stars in the Dark Energy Survey (DES). Microlensing occurs when a primordial black hole (lens) passes in front of a background star, briefly brightening the output from that star. This brightening, due to the increase in magnitude, becomes detectable. First, we must cut out galaxies from our sample of stars. We then vary key parameters involved in lensing to create potential light curves, and then compare them to light curves from actual events, as well as calculating errors. We then send off these curves for further analysis to determine if any real events occurred. We plan to create 106 light curves, due to the large amount of parameters being varied. If these primordial black holes are dark matter, we hope to eventually detect multiple events using the light curves we have created.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Methods of using a laser to spall and drill holes in rocks

Apparatus and methods of using lasers are provided for spalling and drilling holes into rocks. A rock removal process is provided that utilizes a combination of laser-induced thermal stress and laser induced superheated steam explosions just below the surface of the laser/rock interaction to spall the rock into small fragments that can then be easily removed by a purging flow. Single laser beams of given irradiance spall rock and create holes having diameter and depth approximately equal to the beam spot size. A group of the single laser beams are steered in a controllable manner by an electro-optic laser beam switch to locations on the surface of the rock, creating multiple overlapping spalled holes thereby removing a layer of rock of a desired diameter. Drilling of a deep hole is achieved by spalling consecutive layers with an intermittent feed motion of the laser head perpendicular to the rock surface.

02 PETROLEUM↗

Dirac and Majorana Neutrino Signatures of Primordial Black Holes

We study Primordial Black Holes (PBHs) as sources of massive neutrinos via Hawking radiation. Emphasizing that black holes emit neutrino mass eigenstates, we describe quantitatively how the PBH evolution and lifetime is affected by the mass and fermionic -- Dirac or Majorana -- nature of neutrinos. In the case of Dirac neutrinos, PBHs radiate right-handed and left-handed neutrinos in equal amounts, thus possibly increasing the effective number of neutrino species, $N_{\rm eff}$. Considering the full system of Friedmann equations, and the current constraint on $N_{\rm eff}$, we derive a novel bound on the initial PBH fraction $\beta^\prime$ for black hole masses $4\times 10^7\ {\rm g}\lesssim M_i \lesssim 10^9$ g. Future measurements of $N_{\rm eff}$ may be able to constraint the initial fraction for black hole masses as low as 1 g. If an excess in $N_{\rm eff}$ is found, PBHs with Dirac neutrinos could provide a minimal explanation of it. For example, for $10^7\ {\rm g} \lesssim M_i\lesssim 10^9$ g and $\beta^\prime \gtrsim 10^{-13}$, an excess radiation at the level of $0.2\lesssim \Delta N_{\rm eff}\lesssim 0.37$ is produced, which can alleviate the tension of the Hubble parameter measurements. Finally, we obtain the diffuse flux of right-helical neutrinos from PBHs at the Earth, and show that their detection in a PTOLEMY-like detector (using neutrino capture on Tritium) would be difficult.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hot Gravitons and Gravitational Waves From Kerr Black Holes in the Early Universe

Any abundance of black holes that was present in the early universe will evolve as matter, making up an increasingly large fraction of the total energy density as space expands. This motivates us to consider scenarios in which the early universe included an era that was dominated by low-mass ($M < 5\times 10^8$ g) black holes which evaporate prior to primordial nucleosynthesis. In significant regions of parameter space, these black holes will become gravitationally bound within binary systems, and undergo mergers before evaporating. Such mergers result in three potentially observable signatures. First, any black holes that have undergone one or more mergers will possess substantial angular momentum, causing their Hawking evaporation to produce significant quantities of high-energy gravitons. These products of Hawking evaporation are predicted to constitute a background of hot ($\sim$eV-keV) gravitons today, with an energy density corresponding to $\Delta N_{\rm eff} \sim 0.01-0.03$. Second, these mergers will produce a stochastic background of high-frequency gravitational waves. And third, the energy density of these gravitational waves can be as large as $\Delta N_{\rm eff} \sim 0.3$, depending on the length of time between the mergers and evaporation. These signals are each potentially within the reach of future measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Laser process and corresponding structures for forming contact holes of solar cells

Contact holes of solar cells are formed by laser ablation to accommodate various solar cell designs. Use of a laser to form the contact holes is facilitated by replacing films formed on the diffusion regions with a film that has substantially uniform thickness. Contact holes may be formed to deep diffusion regions to increase the laser ablation process margins. The laser configuration may be tailored to form contact holes through dielectric films of varying thicknesses.

14 SOLAR ENERGY↗

Cosmological Magnetic Fields from Primordial Kerr-Newman Black Holes

The origin of our universe's cosmological magnetic fields remains a mystery. In this study, we consider whether these magnetic fields could have been generated in the early universe by a population of charged, spinning primordial black holes. To this end, we calculate the strength of the magnetic fields generated by this population, and describe their evolution up to the current epoch. We find that extremal black holes in the mass range $ M \sim 10^{28} -10^{36} \, {\rm g}$ could potentially produce magnetic fields with present day values as large as $B \sim 10^{-20} - 10^{-15} \, {\rm G}$. While we remain largely agnostic as to the origin of these spinning, charged black holes, we do briefly discuss how new physics may have induced a chemical potential which could have briefly maintained the black holes in an electrically charged state in the early universe.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement and simulation of jet mass caused by a high-aspect ratio hole perturbation

Inertial confinement fusion (ICF) capsule performance can be negatively impacted by the presence of hydrodynamic instabilities. To perform a gas fill on an ICF capsule, current plans involve drilling a small hole and inserting a fill tube to inject the gas mixture into the capsule. This introduces a perturbation on the capsule, which can seed hydrodynamic instabilities. The small hole can cause jetting of the shell material into the gas, which might adversely affect the capsule performance. We have performed simulations and experiments to study the hydrodynamic evolution of jets from high-aspect ratio holes, such as the fill tube hole. Although simulations using cold materials overpredict the amount of mass in the jet, when a reasonable amount of preheat (<1 eV) is introduced, the simulations are in better agreement with the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Semiclassical Time Evolution of the Holes from Luttinger Hamiltonian

We study the semi-classical motion of holes by exact numerical solution of the Luttinger model. The trajectories obtained for the heavy and light holes agree well with the higher order corrections to the abelian and the non-abelian adiabatic theories in Ref. [1] [S. Murakami et al., Science 301, 1378 (2003)], respectively. It is found that the hole trajectories contain rapid oscillations reminiscent of the 'Zitterbewegung' of relativistic electrons. We also comment on the non-conservation of helicity of the light holes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Hole‐Carrier‐Dominant Transport in 2D Single‐Crystal Copper

Abstract In 2D noble metals like copper, the carrier scattering at grain boundaries has obscured the intrinsic nature of electronic transport. However, it is demonstrated that the intrinsic nature of transport by hole carriers in 2D copper can be revealed by growing thin films without grain boundaries. As even a slight deviation from the twin boundary is perceived as grain boundaries by electrons, it is only through the thorough elimination of grain boundaries that the hidden hole‐like attribute of 2D single‐crystal copper can be unmasked. Two types of Fermi surfaces, a large hexagonal Fermi surface centered at the zone center and the triangular Fermi surface around the zone corner, tightly matching to the calculated Fermi surface topology, confirmed by angle‐resolved photoemission spectroscopy (ARPES) measurements and vivid nonlinear Hall effects of the 2D single‐crystal copper account for the presence of hole carriers experimentally. This breakthrough suggests the potential to manipulate the majority carrier polarity in metals by means of grain boundary engineering in a 2D geometry.

36 MATERIALS SCIENCE↗

Black hole thermodynamics from a variational principle: asymptotically conical backgrounds

The variational problem of gravity theories is directly related to black hole thermodynamics. For asymptotically locally AdS backgrounds it is known that holographic renormalization results in a variational principle in terms of equivalence classes of boundary data under the local asymptotic symmetries of the theory, which automatically leads to finite conserved charges satisfying the first law of thermodynamics. We show that this connection holds well beyond asymptotically AdS black holes. In particular, we formulate the variational problem for N = 2 STU supergravity in four dimensions with boundary conditions corresponding to those obeyed by the so called ‘subtracted geometries’. We show that such boundary conditions can be imposed covariantly in terms of a set of asymptotic second class constraints, and we derive the appropriate boundary terms that render the variational problem well posed in two different duality frames of the STU model. This allows us to define finite conserved charges associated with any asymptotic Killing vector and to demonstrate that these charges satisfy the Smarr formula and the first law of thermodynamics. Moreover, by uplifting the theory to five dimensions and then reducing on a 2-sphere, we provide a precise map between the thermodynamic observables of the subtracted geometries and those of the BTZ black hole. Finally, surface terms play a crucial role in this identification.

79 ASTRONOMY AND ASTROPHYSICS↗

(Non-adiabatic) string creation on nice slices in Schwarzschild black holes

Nice slices have played a pivotal role in the discussion of the black hole information paradox as they avoid regions of strong spacetime curvature and yet smoothly cut through the infalling matter and the outgoing Hawking radiation, thus, justifying the use of low energy field theory. To avoid information loss it has been argued recently, however, that local effective field theory has to break down at the horizon. To assess the extent of this breakdown in a UV complete framework we study string-theoretic effects on nice slices in Schwarzschild black holes. Here, our purpose is two-fold. First, we use nice slices to address various open questions and caveats of [1] where it was argued that boost-enhanced non-adiabatic string-theoretic effects at the horizon could provide a dynamical mechanism for the firewall. Second, we identify two non-adiabatic effects on nice slices in Schwarzschild black holes: pair production of open strings near the horizon enhanced by the presence of the infinite tower of highly excited string states and a late-time non-adiabatic effect intrinsic to nice slices.

79 ASTRONOMY AND ASTROPHYSICS↗

Global symmetry, Euclidean gravity, and the black hole information problem

In this paper we argue for a close connection between the non-existence of global symmetries in quantum gravity and a unitary resolution of the black hole information problem. In particular we show how the essential ingredients of recent calculations of the Page curve of an evaporating black hole can be used to generalize a recent argument against global symmetries beyond the AdS/CFT correspondence to more realistic theories of quantum gravity. We also give several low-dimensional examples of quantum gravity theories which do not have a unitary resolution of the black hole information problem in the usual sense, and which therefore can and do have global symmetries. Motivated by this discussion, we conjecture that in a certain sense Euclidean quantum gravity is equivalent to holography.

79 ASTRONOMY AND ASTROPHYSICS↗

Universal entropy and hawking radiation of near-extremal AdS4 black holes

We compute the Bekenstein-Hawking entropy of near-extremal asymptotically AdS 4 electrically charged rotating black holes using three different methods: (i) from the gravity solution, (ii) from the near-horizon Kerr/CFT correspondence and (iii) from the boundary conformal field theory. The results from these three different approaches match exactly, giving us a unique and universal expression for the entropy and the microstate counting of near-extremal AdS black holes via the AdS/CFT correspondence. In the second method, we extend the Kerr/CFT correspondence to the near-extremal case to compute the left and right central charges. We also use hidden conformal symmetry of the near-horizon geometry to compute the Frolov-Thorne temperatures. From the results of the near-extremal AdS 4 black hole entropy, we provide a microscopic foundation for Hawking radiation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗