Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GEOLOGIC MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Identifying high energy density stream-reaches through refined geospatial resolution in hydropower resource assessment

Benefited from the rapid development of multiple geospatial data sets on topography, hydrology, and existing energy-water infrastructures, the reconnaissance level hydropower resource assessment can now be conducted using geospatial models in all regions of the US. Furthermore, the updated techniques can be used to estimate the total undeveloped hydropower potential across all regions, and may eventually help identify further hydropower opportunities that were previously overlooked. To enhance the characterization of higher energy density stream-reaches, this paper explored the sensitivity of geospatial resolution on the identification of hydropower stream-reaches using the geospatial merit matrix based hydropower resource assessment (GMM-HRA) model. GMM-HRA model simulation was conducted with eight different spatial resolutions on six U.S. Geological Survey (USGS) 8-digit hydrologic units (HUC8) located at three different terrains; Flat, Mild, and Steep. The results showed that more hydropower potential from higher energy density stream-reaches can be identified with increasing spatial resolution. Both Flat and Mild terrains exhibited lower impacts compared to the Steep terrain. Consequently, greater attention should be applied when selecting the discretization resolution for hydropower resource assessments in the future study.

13 HYDRO ENERGY↗

Comprehensive geoneutrino analysis with Borexino

This paper presents a comprehensive geoneutrino measurement using the Borexino detector, located at Laboratori Nazionali del Gran Sasso (LNGS) in Italy. The analysis is the result of 3262.74 days of data between December 2007 and April 2019. The paper describes improved analysis techniques and optimized data selection, which includes enlarged fiducial volume and sophisticated cosmogenic veto. The reported exposure of ( 1.29 ± 0.05 ) × 10 32 protons × year represents an increase by a factor of two over a previous Borexino analysis reported in 2015. By observing 52.6 - 8.6 + 9.4 ( stat ) - 2.1 + 2.7 ( sys ) geoneutrinos (68% interval) from U 238 and Th 232 , a geoneutrino signal of 47.0 - 7.7 + 8.4 ( stat ) - 1.9 + 2.4 ( sys ) TNU with - 17.2 + 18.3 % total precision was obtained. This result assumes the same Th/U mass ratio as found in chondritic CI meteorites but compatible results were found when contributions from U 238 and Th 232 were both fit as free parameters. Antineutrino background from reactors is fit unconstrained and found compatible with the expectations. The null-hypothesis of observing a geoneutrino signal from the mantle is excluded at a 99.0% C.L. when exploiting detailed knowledge of the local crust near the experimental site. Measured mantle signal of 21.2 - 9.0 + 9.5 ( stat ) - 0.9 + 1.1 ( sys ) TNU corresponds to the production of a radiogenic heat of 24.6 - 10.4 + 11.1 TW (68% interval) from U 238 and Th 232 in the mantle. Assuming 18% contribution of K 40 in the mantle and 8.1 - 1.4 + 1.9 TW of total radiogenic heat of the lithosphere, the Borexino estimate of the total radiogenic heat of the Earth is 38.2 - 12.7 + 13.6 TW , which corresponds to the convective Urey ratio of 0.78 - 0.28 + 0.41 . These values are compatible with different geological predictions, however there is a ~ 2.4 σ tension with those Earth models which predict the lowest concentration of heat-producing elements in the mantle. In addition, by constraining the number of expected reactor antineutrino events, the existence of a hypothetical georeactor at the center of the Earth having power greater than 2.4 TW is excluded at 95% C.L. Particular attention is given to the description of all analysis details which should be of interest for the next generation of geoneutrino measurements using liquid scintillator detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Researchers Mine Information from Next-Generation Subsurface Flow Simulations

A research team based at Virginia Tech University leveraged computing resources at the US Department of Energy's (DOE's) Oak Ridge National Laboratory to explore subsurface multiphase flow phenomena that can't be experimentally observed. Using the Cray XK7 Titan supercomputer at the Oak Ridge Leadership Computing Facility, the team took Micro-CT images of subsurface geologic systems and created two-phase flow simulations. The team's model development has implications for computational research pertaining to carbon sequestration, oil recovery, and contaminant transport.

97 MATHEMATICS AND COMPUTING↗

Seismic-velocity inversion using surface-wave tomography

© 2018 SEG. In this paper, we present the workflow of the application of surface wave tomography to characterize the near surface. A near surface model is simulated with a shallow unconsolidated layer that has a variable thickness and a deep consolidated zone. Data is filtered by bandpass filters and surface wave phase arrival times are picked, and surface wave velocities are inverted using a ray theoretical tomographic approach. A good agreement is found between the inverted results and the original model. In another model, a thin fault zone is detected. Agreement between the tomographic results and the model suggests that surface wave tomography is well suited for characterizing shallow geology with the capability of identifying low velocity anomalies and general lateral variations.

Wu, Zheshu↗

Rare Earth Element Geochemistry for Produced Waters, WY

These data represent major, minor, trace, isotopes, and rare earth element concentrations in geologic formations and water associated with oil and gas production. *Note - Link below contains updated version of spreadsheet (6/14/2017)

15 GEOTHERMAL ENERGY↗

Rare Earth Element Concentration of Wyoming Thermal Waters Update

Updated version of data generated from rare earth element investigation of produced waters. These data represent major, minor, trace, isotopes, and rare earth element concentrations in geologic formations and water associated with oil and gas production.

15 GEOTHERMAL ENERGY↗

WHOLESCALE Catalog of Rock Samples at San Emidio Nevada collected in January 2021

This submission contains information on thirty-six rock samples collected from San Emidio, Nevada during January, 2021 for Subtask 2.3 of the WHOLESCALE project. The following resources include a .zip of rock sample photos taken in the field, a .zip of rock sample photos taken in the laboratory at UW-Madison, and an excel catalog of rock samples with information on sample name, rock type, coordinates of sample location, structural measurements, field notes, observations for plug preparation (e.g., weathering, ability to be cut and cored), and rock descriptions. It should be noted that not every sample was photographed in the field. Names and descriptions of rock formation units are taken from Rhodes et al. (2011). The README.txt file is a description of this submission.

15 GEOTHERMAL ENERGY↗

Seismic Tomography 2024

Seismic tomography is the most abundant source of information about the internal structure of the Earth at scales ranging from a few meters to thousands of kilometers. It constrains the properties of active volcanoes, earthquake fault zones, deep reservoirs and storage sites, glaciers and ice sheets, or the entire globe. It contributes to outstanding societal problems related to natural hazards, resource exploration, underground storage, and many more. The recent advances in seismic tomography are being translated to nondestructive testing, medical ultrasound, and helioseismology. Nearly 50 yr after its first successful applications, this article offers a snapshot of modern seismic tomography. Focused on major challenges and particularly promising research directions, it is intended to guide both Earth science professionals and early-career scientists. The individual contributions by the coauthors provide diverse perspectives on topics that may at first seem disconnected but are closely tied together by a few coherent threads: multiparameter inversion for properties related to dynamic processes, data quality, and geographic coverage, uncertainty quantification that is useful for geologic interpretation, new formulations of tomographic inverse problems that address concrete geologic questions more directly, and the presentation and quantitative comparison of tomographic models. Finally, it remains to be seen which of these problems will be considered solved, solved to some extent, or practically unsolvable over the next decade.

58 GEOSCIENCES↗

Results of Laboratory Scale Fracture Tests on Rock/Cement Interfaces

A number of pure cement and cement-basalt interface samples were subjected to a range of compressive loads to form internal fractures. X-ray microtomography was used to visualize the formation and growth of internal fractures in three dimensions as a function of compressive loads. This laboratory data will be incorporated into a geomechanics model to predict the risk of CO 2 leakage through wellbores during geologic carbon storage.

36 MATERIALS SCIENCE↗

Machine Learning-Driven Quantification of CO2 Plume Dynamics at Illinois Basin Decatur Project Sites Using Microseismic Data

This study utilizes machine learning to quantify CO2 plume extents by analyzing microseismic data from the Illinois Basin Decatur Project (IBDP). Leveraging a unique dataset of well logs, microseismic records, and CO2 injection metrics, this work aims to predict the temporal evolution of subsurface CO2 saturation plumes. The findings illustrate that machine learning can predict plume dynamics, revealing vertical clustering of microseismic events over distinct time periods within certain proximities to the injection well, consistent with an invasion percolation model. The buoyant CO2 plume partially trapped within sandstone intervals periodically breaches localized barriers or baffles, which act as leaky seals and impede vertical migration until buoyancy overcomes gravity and capillary forces, leading to breakthroughs along vertical zones of weakness. Between different unsupervised clustering techniques, K-Means and DBSCAN were applied and analyzed in detail, where K-means outperformed DBSCAN in this specific study by indicating the combination of the highest Silhouette Score and the lowest Davies–Bouldin Index. The predictive capability of machine learning models in quantifying CO2 saturation plume extension is significant for real-time monitoring and management of CO2 sequestration sites. The models exhibit high accuracy, validated against physical models and injection data from the IBDP, reinforcing the viability of CO2 geological sequestration as a climate change mitigation strategy and enhancing advanced tools for safe management of these operations.

Iyegbekedo, Ikponmwosa↗

On a Unified Core Characterization Methodology to Support the Systematic Assessment of Rare Earth Elements and Critical Minerals Bearing Unconventional Carbon Ores and Sedimentary Strata

A significant gap exists in our understanding and ability to predict the spatial occurrence and extent of rare earth elements (REE) and certain critical minerals (CM) in sedimentary strata. This is largely due to a lack of existing, systematic, and well-distributed REE and CM samples and analyses in United States sedimentary basins. In addition, the type of sampling and characterization performed to date has generally lacked the resolution and approach required to constrain geologic and geographic heterogeneities typical of subsurface, mineral resources. Here, we describe a robust and systematic method for collecting core scale characterization data that can be applied to studies on the contextual and spatial attributes, the geologic history, and lithostratigraphy of sedimentary basins. The methods were developed using drilled cores from coal bearing sedimentary strata in the Powder River Basin, Wyoming (PRB). The goal of this effort is to create a unified core characterization methodology to guide systematic collection of key data to achieve a foundation of spatially and geologically constrained REEs and CMs. This guidance covers a range of measurement types and methods that are each useful either individually or in combination to support characterization and delineation of REE and CM occurrences. The methods herein, whether used in part or in full, establish a framework to guide consistent acquisition of geological, geochemical, and geospatial datasets that are key to assessing and validating REE and CM occurrences from geologic sources to support future exploration, assessment, and techno-economic related models and analyses.

54 ENVIRONMENTAL SCIENCES↗

Research in volcanic geology, petrology and planetary science at MIT, 1969 to 1974

The behavior of volcanoes was studied by geologic mapping, petrologic investigations of lava and xenoliths, physical measurements, and theoretical modelling. Field observations were conducted in Alaska (Nunivak Island), Iceland, Hawaii (Mauna Kea), Italy (Etna, Stromboli), and Arizona. The results are discussed and compared with known data for lunar and planetary gelogy. Field methods used for the volcano research are cited and a list is given of all participating scientists and students. Publications and abstracts resulting from the research are also listed.

Mcgetchin, T. R.↗

Techniques for interpretation of geoid anomalies

For purposes of geological interpretation, techniques are developed to compute directly the geoid anomaly over models of density within the earth. Ideal bodies such as line segments, vertical sheets, and rectangles are first used to calculate the geoid anomaly. Realistic bodies are modeled with formulas for two-dimensional polygons and three-dimensional polyhedra. By using Fourier transform methods the two-dimensional geoid is seen to be a filtered version of the gravity field, in which the long-wavelength components are magnified and the short-wavelength components diminished.

Chapman, M. E.↗

The lunar regolith - Comparative petrology of the Apollo sites

A description is presented of the modal petrology of eight surface soils from the Apollo 11, 12, 14, 15, and 16 landing sites. One of the most striking features of the petrology of the considered soils is found to be the similarity in distribution of pyroxene composition between the soil and the local rock types. The considered investigation is concerned with certain difficulties with respect to an understanding of regolith evolution. Lunar soils contain material foreign to the local geology. The foreign material must have been transported over long distances. However, models of regolith formation on the moon indicate that lateral transport is inefficient. It is found in the investigation that the soil is predominantly of local derivation, that lateral homogenization is a minor process, that foreign material is present in the amounts indicated by bulk chemical mixing models, and that preferential transport of fine-grained material does not occur.

Labotka, T. C.↗

Lunar and Planetary Science Conference, 13th, Houston, TX, March 15-19, 1982, Proceedings. Part 2

The second part of the proceedings of the Thirteenth Lunar and Planetary Science Conference considers sedimentary processes and crustal cycling on Venus, a model for the formation of the earth's core, evidence of resurfacing in the lunar nearside highlands, the geology of Tethys, thermal stresses in planetary elastic lithospheres, the petrology and comparative thermal and mechanical histories of clasts in breccia 62236, lunar paleointensity data and its implications for the origin of lunar magnetism, and a model for the accumulation of solar wind radiation damage effects in lunar dust grains. Also discussed are fluid inclusions in stony meteorites, nuclear track and compositional studies of olivines in CI and CM chondrites, the impact of an asteroid or comet in the ocean and the extinction of terrestrial life, cooling rates for glass-containing lunar compositions, and the homogeneity of lava flows.

Boynton, W. V.↗

Surface Units on Venus Derived from Pioneer-venus Altimetry, Roughness, and Reflectivity Measurements

The nature of the Venusian surface was revealed by Pioneer-Venus (PV) observations to be diverse at scales from tens to hundreds of kilometers. Spatial correlations of elevation, surface roughness, and radar reflectivity were investigated as a means of assessing the degree of homogeneity of surface radar properties within topographic provinces and develop a map of possible geologic boundaries. Correlations were performed in a supervised fashion whereby unit boundaries were selected on the basis of statistical and empirical studies of the individual data sets. Interpretations of these units in terms of geologic characteristics are based on the determination of physical units which are model dependent.

Peterfreund, A. R.↗

Physical characteristics and evolutionary trends of continental rifts

Rifts may be defined as zones beneath which the entire lithosphere has ruptured in extension. They are widespread and occur in a variety of tectonic settings, and range up to 2,600 m.y. in age. The object of this review is to highlight characteristic features of modern and ancient rifts, to emphasize differences and similarities in order to help characterize evolutionary trends, to identify physical conditions favorable for initiation as well as termination of rifting, and to provide constraints for future modeling studies of rifting. Rifts are characterized on the basis of their structural, geomorphic, magmatic and geophysical features and the diverse character of these features and their evolutionary trends through time are discussed. Mechanisms of rifting are critically examined in terms of the physical characteristics and evolutionary trends of rifts, and it is concluded that while simple models can give valuable insight into specific processes of rifting, individual rifts can rarely, if ever, be characterized by well defined trends predicted by these models. More data are required to clearly define evolutionary trends, and the models require development to incorporate the effects of lithospheric heterogeneities and complex geologic histories.

Ramberg, I. B.↗