Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Investigation of the Ti/MgCl{sub 2} interface on a Si(111) 7 x 7 substrate

Photoelectron spectroscopy with synchrotron radiation, low energy electron diffraction, and ion-scattering spectroscopy were used in order to study the Ti/MgCl{sub 2} interface grown on an atomically clean Si(111) 7 x 7 substrate. A series of high resolution spectra after deposition of a thick MgCl{sub 2} layer, step by step deposition of Ti and gradual annealing, indicated a very reactive interface even at room temperature. Strong interaction between the incoming Ti atoms and the MgCl{sub 2} layer, leads to the formation of Ti{sup 2+} and Ti{sup 4+} oxidation states. The interfacial interaction continues even at multilayer Ti coverage mainly by the partial disruption of Mg-Cl bonds and the formation of Ti-Cl sites, rendering this interface a very promising UHV-compatible model of a pre-catalyst for olefin polymerization. After the final annealing, the MgCl{sub 2} multilayers desorb while Ti remains on the surface forming a silicide layer on which Cl and Mg atoms are attached.

36 MATERIALS SCIENCE↗

Copper intercalation at the interface of graphene and Ir(111) studied by scanning tunneling microscopy

We report on the intercalation of a submonolayer of copper at 775 K underneath graphene epitaxially grown on Ir(111) studied by means of low energy electron diffraction (LEED) and scanning tunneling microscopy (STM) at 77 K. Nucleation and growth dynamics of Cu below graphene have been investigated, and, most importantly, the intercalation mechanism has been identified. First, LEED patterns reveal the pseudomorphic growth of Cu on Ir under the topmost graphene layer resulting in a large Cu in-plane lattice parameter expansion of about 6% compared to Cu(111). Second, large-scale STM topographs as a function of Cu coverage show that Cu diffusion on Ir below graphene exhibits a low energy barrier resulting in Cu accumulation at Ir step edges. As a result, the graphene sheet undergoes a strong edges reshaping. Finally, atomically-resolved STM images reveal a damaged graphene sheet at the atomic scale after metal intercalation. Point defects in graphene were shown to be carbon vacancies. According to these results, a Cu penetration path beneath graphene is proposed to occur via metal aided defect formation with no or poor self healing of the graphene sheet. This work illustrates the fact that Cu intercalation is harmful for graphene grown on Ir(111) at the atomic scale.

36 MATERIALS SCIENCE↗

Preparation and characterization of Co single-crystal thin films with hcp, fcc and bcc structures

Co crystals with three different structures are realized in the form of single-crystal thin films hetero-epitaxially grown on single-crystal substrates by ultrahigh vacuum rf magnetron sputtering. hcp-, fcc-, and bcc-Co single-crystal films are formed on Cr(211){sub bcc}, Cu(100){sub fcc}, and GaAs(110){sub B3}, respectively. The film growth process is studied by RHEED, and the lattice constants of these Co films are determined by x-ray diffraction. The magnetization properties of these thin films are reflecting the magnetocrystalline anisotropies of Co crystals with the easy magnetization axes along hcp<0001>, fcc<111>, and bcc<100> directions.

36 MATERIALS SCIENCE↗

Cobalt Intercalation of Graphene on Silicon Carbide

In this paper, we studied cobalt intercalation of single-layer graphene grown on the 4H-SiC(0001) polytype. The experiments were carried out in situ under ultrahigh vacuum conditions by high energy resolution photoelectron spectroscopy using synchrotron radiation and low energy electron diffraction. The nominal thicknesses of the deposited cobalt layers varied in the range of 0.2–5 nm, while the sample temperature was varied from room temperature to 800°C. Unlike Fe films, the annealing of Co films deposited on graphene at room temperature is shown to not intercalate graphene by cobalt. The formation of the graphene–cobalt–SiC intercalation system was detected upon deposition of Co atoms on samples heated to temperatures of above ~400°C. Cobalt films with a thickness up to 2 nm under graphene are formed using this method, and they are shown to be magnetized along the surface at thicknesses of greater than 1.3 nm. Graphene intercalation by cobalt was found to be accompanied by the chemical interaction of Co atoms with silicon carbide leading to the synthesis of cobalt silicides. At temperatures of above 500°C, the growth of cobalt films under graphene is limited by the diffusion of Co atoms into the bulk of silicon carbide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural properties and recrystallization effects in ion beam modified B20-type FeGe films

Disordered iron germanium (FeGe) has recently garnered interest as a testbed for a variety of magnetic phenomena as well as for use in magnetic memory and logic applications. This is partially owing to its ability to host skyrmions and antiskyrmions—nanoscale whirlpools of magnetic moments that could serve as information carriers in spintronic devices. In particular, a tunable skyrmion–antiskyrmion system may be created through precise control of the defect landscape in B20-phase FeGe, motivating the development of methods to systematically tune disorder in this material and understand the ensuing structural properties. To this end, we investigate a route for modifying magnetic properties in FeGe. In particular, we irradiate epitaxial B20-phase FeGe films with 2.8 MeV Au 4+ ions, which creates a dispersion of amorphized regions that may preferentially host antiskyrmions at densities controlled by the irradiation fluence. To further tune the disorder landscape, we conduct a systematic electron diffraction study with in situ annealing, demonstrating the ability to recrystallize controllable fractions of the material at temperatures ranging from ~150 to 250°C. Finally, we describe the crystallization kinetics using the Johnson–Mehl–Avrami–Kolmogorov model, finding that the growth of crystalline grains is consistent with diffusion-controlled one-to-two dimensional growth with a decreasing nucleation rate.

36 MATERIALS SCIENCE↗

Temperature programed desorption of C{sub 2}H{sub 4} from pure and graphite-covered Pt(111)

Ethylene adsorption on Pt(111) at 95 K was studied by temperature programed desorption (TPD), low energy electron diffraction (LEED), and x-ray photoelectron spectroscopy. Ethylene desorbs reversibly at 112 K and irreversibly at 255 and 280 K. It is generally accepted that annealing of ethylene adsorbed on Pt(111) to 300 K results in a dehydrogenation to ethylidyne through an ethylidene intermediate. This was observed by a hydrogen desorption peak at 300 K. Also, hydrogenation of the adsorbed ethylene was observed by a small ethane desorption peak at 300 K. Upon heating to 700 K, the ethylidyne species will further dehydrogenate to carbidic carbon species with hydrogen desorption peaks at 460 and 640 K. If the carbidic species is heated to higher temperatures (up to 1000 K), it will further dehydrogenate and form graphitic islands which will accumulate by Ostwald ripening in larger islands at the step edges of the surface. After annealing the sample to 1000 K, a statistically distributed 8x8 superstructure of these graphite islands is achieved, as interpreted from A pattern in the LEED data. The TPD results indicate that ethylene adsorption on Pt(111) results in the formation of graphitic islands upon heating to 1000 K, contrary to previous conjectures of formation of a full graphite monolayer.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth and characterization of InSb{sub 1-x}N{sub x} on GaAs for long wavelength infrared applications

Recent research progress and findings in InSbN have attracted great attention due to its use in long wavelength infrared applications. A large bandgap reduction in InSb resulting from high N incorporation with minimal crystal defects is challenging due to relatively small atomic size of N. Hence optimization of growth conditions plays an important role in the growth of high-quality InSbN epilayers for device purposes. In this paper, we report on the correlation of structural, vibrational, electrical, and optical properties of molecular beam epitaxially grown InSbN epilayers grown on GaAs substrates, as a function of varying growth temperatures. Two dimensional growths of InSb and InSbN were confirmed from dynamic reflection high energy electron diffraction patterns and growth parameters were optimized. High crystalline quality of the epilayers is attested to by a low full width at half maximum of 200 arcsec from high resolution x-ray diffraction (HRXRD) scans and by the high intensity and well-resolved InSb longitudinal optical (LO) and 2{sup nd} order InSb LO mode observed from micro-Raman spectroscopy. The N incorporation in these InSbN epilayers is estimated to be 1.4% based on HRXRD simulation. X-ray photoelectron spectroscopy (XPS) studies reveal that most of the N present in the layers are in the form of In-N bonding. Variation of the lattice disorder with growth temperature is correlated with the types of N bonding present, the carrier concentration and mobility, observed in the corresponding XPS spectra and Hall measurements, respectively. XPS analysis, HRXRD scans, and Raman spectral analysis indicate that lower growth temperature favors In-N bonding which dictates N incorporation in the substitutional sites and lattice disorder, whereas, high growth temperature promotes the formation of In-N-Sb bonding. The best room temperature and 77 K electrical transport parameters and maximum redshift in the absorption edge have been achieved in the InSbN epilayer grown in the 290 deg. C {approx} 330 deg. C temperature range.

36 MATERIALS SCIENCE↗

Final Technical Report for DOE Grant, number DE-FG02-05ER15701; Probing Surface Chemistry Under Catalytic Conditions: Olefin Hydrogenation,Cyclization and Functionalization.

The specific goal of this work was to understanding the catalytic reactions pathways for the synthesis of vinyl acetate over Pd, Au and PdAu alloys. A combination of both experimental methods (X-ray and Auger spectroscopies, low-energy ion scattering (LEIS), low-energy electron diffraction (LEED) and theory (Density Functional Theory (DFT) calculations and Monte Carlo methods under various different reactions) were used to track the surface chemistry and the influence of alloying. The surface intermediates involved in the various reactions were characterized using reflection-absorption infrared spectroscopy and LEED to identify the nature of the surface species and temperature-programmed desorption (TPD) to follow the decomposition pathways and measure heats of adsorption. These results along with those from density functional theoretical calculations were used determine the kinetics for elementary steps. The results from this work showed that the reaction proceeds via the Samanos mechanism over Pd surfaces whereby the ethylene directly couples with acetate to form an acetoxyethyl intermediate that subsequently undergoes a beta-hydride elimination to form the vinyl acetate monomer. The presence of Au was found to modify the adsorption energies and surface coverages of important surface intermediates including acetate, ethylidyne and ethylene which ultimately influences the critical C-H activation and coupling steps. By controlling the surface alloy composition or structure one can begin to control the steps that control the rate and even the mechanism.

36 MATERIALS SCIENCE↗

Decagonal Sn clathrate on d-Al-Ni-Co

Decagonal quasiperiodic ordering of Sn thin films on d-Al-Ni-Co is shown based on scanning tunneling microscopy (STM), low-energy electron diffraction, and density functional theory (DFT). Interestingly, the decagonal structural correlations are partially retained even up to a large film thickness of 10 nm grown at 165±10K. The nucleation centers called “Sn white flowers” identified by STM at submonolayer thickness are recognized as valid patches of the decagonal clathrate structure with low adsorption energies of these motifs. Due to the excellent lattice matching (to within 1%) between columns of Sn dodecahedra in the clathrate structure and pentagonal motifs at the d-Al-Ni-Co surface, the interfacial energy favors clathrate over the competing Sn crystalline forms. DFT study of the Sn/Al-Ni-Co composite model shows good mechanical stability, as shown by the work of separation of Sn from Al-Ni-Co slab that is comparable to the clathrate self-separation energy. Finally, the relaxed surface terminations of the R 2 T 4 clathrate approximant are in self-similarity correspondence with the motifs observed in the STM images from monolayer to the thickest Sn film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and ion-irradiation tolerance of the Dy2TiO5 polymorphs

In developing improvements in nuclear fuels, work has been conducted in replacing boron with lanthanides to act as neutron absorbent materials. To further this development for the first time the three major polymorphs of Dy2TiO5 have been fabricated as bulk, single-phase materials in a systematic study. Crystal structure refinement has been carried out from powder x-ray diffraction data, with further structural detail attained via electron diffraction. A cubic phase, defect-pyrochlore, Fd-3m space group, was found with cell parameter a = 10.2996 (1) angstrom and oxygen x48f positional parameter = 0.331 (1). Dy2TiO5 was also fabricated as a bulk, single-phase compound with hexagonal symmetry, P6(3)/mmc space group, with cell parameters a = b = 3.6307(2), c = 11.8963(8) angstrom. The radiation response for each of the polymorphs has been investigated in-situ via 1 MeV Kr - ion-irradiation and transmission electron microscopy characterisation at the IVEM-TANDEM facility, Argonne National Laboratory. Critical temperatures, T-c, for maintaining crystallinity during irradiation were determined and showed Dy2TiO5 with either orthorhombic or cubic symmetry to perform the best, with the lowest T-c values of 711 and 761 K respectively when compared with the hexagonal form. These relatively low T-c values may be attributed to different characteristics for each phase; high anti-site defect formation energy for the orthorhombic symmetry, and the ability to accommodate disorder for the cubic symmetry.

Burnable poison↗

Fragment-based determination of a proteinase K structure from MicroED data using ARCIMBOLDO_SHREDDER

Structure determination of novel biological macromolecules by X-ray crystallography can be facilitated by the use of small structural fragments, some of only a few residues in length, as effective search models for molecular replacement to overcome the phase problem. Independence from the need for a complete pre-existing model with sequence similarity to the crystallized molecule is the primary appeal of ARCIMBOLDO , a suite of programs which employs this ab initio algorithm for phase determination. Here, the use of ARCIMBOLDO is investigated to overcome the phase problem with the electron cryomicroscopy (cryoEM) method known as microcrystal electron diffraction (MicroED). The results support the use of the ARCIMBOLDO_SHREDDER pipeline to provide phasing solutions for a structure of proteinase K from 1.6 Å resolution data using model fragments derived from the structures of proteins sharing a sequence identity of as low as 20%. ARCIMBOLDO_SHREDDER identified the most accurate polyalanine fragments from a set of distantly related sequence homologues. Alternatively, such templates were extracted in spherical volumes and given internal degrees of freedom to refine towards the target structure. Both modes relied on the rotation function in Phaser to identify or refine fragment models and its translation function to place them. Model completion from the placed fragments proceeded through phase combination of partial solutions and/or density modification and main-chain autotracing using SHELXE . The combined set of fragments was sufficient to arrive at a solution that resembled that determined by conventional molecular replacement using the known target structure as a search model. This approach obviates the need for a single, complete and highly accurate search model when phasing MicroED data, and permits the evaluation of large fragment libraries for this purpose.

59 BASIC BIOLOGICAL SCIENCES↗

Formation of a Stepped Si(100) Surface and Its Effect on the Growth of Ge Islands

The transition from a two-domain to one-domain surface on a Si(100) substrate is investigated. It is demonstrated using reflection high-energy electron diffraction that at a temperature of 600°C and a deposition rate of 0.652 Å/s onto a Si(100) substrate pre-heated to 1000°C and inclined at an angle of 0.35°C to the plane, a series of reflections from the 1 × 2 superstructure completely vanishes at a constant flow of Si. This is attributed to the transition of the surface from monoatomic to diatomic steps. At growth rates lower than 0.652 Å/s, the transition from a two-domain to one-domain surface is also observed; with a decrease in the growth rate, the intensity ratio I{sub 2×1}/I{sub 1×2} decreases and the maximum of the dependences shifts toward lower temperatures. The complete vanishing of the series of superstructural reflections after preliminary annealing at a temperature of 700°C is not observed; this series only vanishes after annealing at 900 and 1000°C. The growth of Ge islands on a Si(100) surface preliminary annealed at a temperature of 800°C is studied. It is shown that the islands tend to nucleate at the step edges. A mechanism of Ge island ordering on the Si(100) surface is proposed.

36 MATERIALS SCIENCE↗

Structural phase transitions in AgTa{sub 0.5}Nb{sub 0.5}O{sub 3} thin films.

Octahedral tilt transitions in epitaxial AgTa{sub 0.5}Nb{sub 0.5}O{sub 3} (ATN) films grown on (001){sub p} (where p = pseudocubic) oriented SrRuO{sub 3}/LaAlO{sub 3} and LaAlO{sub 3} substrates were characterized by electron diffraction and high resolution x-ray diffraction. It was found that the ATN films exhibited octahedral rotations characteristic of the Pbcm space group, similar to those seen in bulk materials; however, the temperature of the M{sub 3} {leftrightarrow} M{sub 2} phase transition has been suppressed by -250 K due to the fact that the correlation length for rotations about c{sub p} was significantly reduced. The average off-center B-cation displacements, which signify the degree of long-range order for these local cation positions, were negligibly small compared to bulk materials, as inferred from the near-zero intensity of the 1/4(001){sub p}-type reflections. On cooling, pronounced ordering of B-cation displacements occurred at {approx}60 K which is significantly lower compared to bulk ({approx}310 K). The onset of this ordering coincides with a broad maximum in relative permittivity as a function of temperature. It is believed that point and planar defects in thin ATN films disrupt the complex sequence of in-phase and antiphase rotations around c{sub p} thereby reducing the effective strength of interactions between the tilting and cation displacements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RCSB Protein Data Bank: Celebrating 50 years of the PDB with new tools for understanding and visualizing biological macromolecules in 3D

We report the Research Collaboratory for Structural Bioinformatics Protein Data Bank (RCSB PDB), funded by the US National Science Foundation, National Institutes of Health, and Department of Energy, has served structural biologists and Protein Data Bank (PDB) data consumers worldwide since 1999. RCSB PDB, a founding member of the Worldwide Protein Data Bank (wwPDB) partnership, is the US data center for the global PDB archive housing biomolecular structure data. RCSB PDB is also responsible for the security of PDB data, as the wwPDB-designated Archive Keeper. Annually, RCSB PDB serves tens of thousands of three-dimensional (3D) macromolecular structure data depositors (using macromolecular crystallography, nuclear magnetic resonance spectroscopy, electron microscopy, and micro-electron diffraction) from all inhabited continents. RCSB PDB makes PDB data available from its research-focused RCSB.org web portal at no charge and without usage restrictions to millions of PDB data consumers working in every nation and territory worldwide. In addition, RCSB PDB operates an outreach and education PDB101.RCSB.org web portal that was used by more than 800,000 educators, students, and members of the public during calendar year 2020. This invited Tools Issue contribution describes (i) how the archive is growing and evolving as new experimental methods generate ever larger and more complex biomolecular structures; (ii) the importance of data standards and data remediation in effective management of the archive and facile integration with more than 50 external data resources; and (iii) new tools and features for 3D structure analysis and visualization made available during the past year via the RCSB.org web portal.

59 BASIC BIOLOGICAL SCIENCES↗

RCSB Protein Data bank: Tools for visualizing and understanding biological macromolecules in 3D

Abstract Now in its 52nd year of continuous operations, the Protein Data Bank (PDB) is the premiere open‐access global archive housing three‐dimensional (3D) biomolecular structure data. It is jointly managed by the Worldwide Protein Data Bank (wwPDB) partnership. The Research Collaboratory for Structural Bioinformatics Protein Data Bank (RCSB PDB) is funded by the National Science Foundation, National Institutes of Health, and US Department of Energy and serves as the US data center for the wwPDB. RCSB PDB is also responsible for the security of PDB data in its role as wwPDB‐designated Archive Keeper. Every year, RCSB PDB serves tens of thousands of depositors of 3D macromolecular structure data (coming from macromolecular crystallography, nuclear magnetic resonance spectroscopy, electron microscopy, and micro‐electron diffraction). The RCSB PDB research‐focused web portal ( RCSB.org ) makes PDB data available at no charge and without usage restrictions to many millions of PDB data consumers around the world. The RCSB PDB training, outreach, and education web portal ( PDB101.RCSB.org ) serves nearly 700 K educators, students, and members of the public worldwide. This invited Tools Issue contribution describes how RCSB PDB (i) is organized; (ii) works with wwPDB partners to process new depositions; (iii) serves as the wwPDB‐designated Archive Keeper; (iv) enables exploration and 3D visualization of PDB data via RCSB.org ; and (v) supports training, outreach, and education via PDB101.RCSB.org . New tools and features at RCSB.org are presented using examples drawn from high‐resolution structural studies of proteins relevant to treatment of human cancers by targeting immune checkpoints.

59 BASIC BIOLOGICAL SCIENCES↗

Influence of Cr on the nanoclusters formation and superferromagnetic behavior of Fe-Cr-Nb-B glassy alloys

High resolution imaging and electron diffraction confirm that in the as-quenched state the structure of Fe{sub 79.7−x}Cr{sub x}Nb{sub 0.3}B{sub 20} (x = 11–13 at. %) melt-spun ribbons is completely amorphous, independent of the Cr content. Energy-dispersive X-ray spectroscopy mapping emphasizes clearly the presence of Fe and Cr clusters varying from approximately 1 to 2–3 nm in size with the increase of Cr content from 11 to 13 at. %. The Fe and Cr atoms segregate the atomic scale to form nanometer sized clusters, influencing strongly the macroscopic magnetic behavior. The Curie temperature of the system, T{sub C}{sup system}, confirmed by the magnetic susceptibility versus temperature measurements, gives the strength of the magnetic interactions between clusters. The inter-cluster interactions are much stronger for lower contents of Cr, the microstructure is less uniform, and T{sub C}{sup system} increases from 290 K for 13 at. % Cr to 330 K for 11.5 at. % Cr. The whole system transforms to a ferromagnetic state through interactions between the clusters. Zero-field cooling and field cooling curves confirm the cluster behavior with a blocking temperature, T{sub b}, of about 250 K. Above T{sub b}, the ribbons behave as a superferromagnetic system, whilst below the blocking temperature a classical ferromagnetic behavior is observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metastable bcc phase formation in 3d ferromagnetic transition metal thin films sputter-deposited on GaAs(100) substrates

Co{sub 100−x}Fe{sub x} and Ni{sub 100−y}Fe{sub y} (at. %, x = 0–30, y = 0–60) films of 10 nm thickness are prepared on GaAs(100) substrates at room temperature by using a radio-frequency magnetron sputtering system. The detailed growth behavior is investigated by in-situ reflection high-energy electron diffraction. (100)-oriented Co and Ni single-crystals with metastable bcc structure are formed in the early stage of film growth, where the metastable structure is stabilized through hetero-epitaxial growth. With increasing the thickness up to 2 nm, the Co and the Ni films start to transform into more stable hcp and fcc structures through atomic displacements parallel to bcc(110) slide planes, respectively. The stability of bcc phase is improved by adding a small volume of Fe atoms into a Co film. The critical thickness of bcc phase formation is thicker than 10 nm for Co{sub 100−x}Fe{sub x} films with x ≥ 10. On the contrary, the stability of bcc phase for Ni-Fe system is less than that for Co-Fe system. The critical thicknesses for Ni{sub 100−y}Fe{sub y} films with y = 20, 40, and 60 are 1, 3, and 5 nm, respectively. The Co{sub 100−x}Fe{sub x} single-crystal films with metastable bcc structure formed on GaAs(100) substrates show in-plane uniaxial magnetic anisotropies with the easy direction along GaAs[011], similar to the case of Fe film epitaxially grown on GaAs(100) substrate. A Co{sub 100−x}Fe{sub x} film with higher Fe content shows a higher saturation magnetization and a lower coercivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Spring-Like Behavior of Chiral Block Copolymer with Helical Nanostructure Driven by Crystallization

The crystallization of helical nanostructure resulting from the self-assembly of a chiral diblock copolymer, poly(styrene)-b-poly(L-lactide) (PS-PLLA), is studied. Various crystalline PS-PLLA nanostructures are obtained by controlling the crystallization temperature of PLLA (T{sub c,PLLA}), at which crystalline helices and crystalline cylinders occur while T{sub c,PLLA} < T{sub g,PS} (the glass transition temperature of PS) and T{sub c,PLLA} T{sub g,PS}, respectively. As evidenced by selected-area electron diffraction and two-dimensional X-ray diffraction results, the PLLA crystallites under confinement reveal a unique anisotropic character regardless of the crystallization temperature. On the basis of observed uniaxial scattering results the PLLA crystallites grown within the microdomains are identified as crystals with preferential growth directions either along the [100] or along the [110]-axes of the PLLA crystalline unit cell, at which the molecular chains and the growth direction are normal and parallel to the central axes of helices, respectively. The formation of this exclusive crystalline growth is attributed to the spatial confinement effect for crystallization. While T{sub c,PLLA} < T{sub g,PS}, owing to the directed crystallization by helical confinement, the preferential crystalline growth leads to the crystallization following a helical track with growth direction parallel to the central axes of helices through a twisting mechanism. Consequently, winding crystals with specific crystallographic orientation within the helical microdomains can be found. By contrast, while T{sub c,PLLA} {ge} T{sub g,PS}, the preferential growth may modulate the curvature of microdomains by shifting the molecular chains to access the fast path for crystalline growth due to the increase in chain mobility. As a result, a spring-like behavior of the helical nanostructure can be driven by crystallization so as to dictate the transformation of helices, resulting in crystalline cylinders that might be applicable to the design of switchable large-strain actuators.

36 MATERIALS SCIENCE↗