Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTRODE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Synthesis and optimized formulation for high-capacity manganese fluoride (MnF 2 ) electrodes for lithium-ion batteries

Electrochemical activity of poorly conductive metal fluorides in Li-ion batteries is contingent on their nanostructuration to reduce diffusion lengths and increase reaction kinetics. In that regard, we optimize the synthesis and electrode formulation of MnF 2 to enable sufficient electrochemical activity required to study its electrochemical conversion reaction mechanism. Solvothermal synthesis in a water–ethanol mixture (1:1 Vol.), using Mn acetate and a slight excess of hydrofluoric acid (HF), results in pure phase, nanosized (˜30 nm diameter) rutile-type MnF 2 ( P 4 2 /mnm). High energy ball-milling of MnF2–carbon mixtures leads to an amorphization of MnF 2 and its partial phase transformation to the α-PbO 2 -type structure, without significant improvement of the electrochemical performance. Changing the electrode binder, however, from typical polyvinylidene fluoride (PVDF) to water-soluble Na-alginate, leads to a significant improvement of the reversibility of the electrochemical reaction. Here, we attribute this drastic improvement to the improved adherence and homogeneity of the electrode film prepared with Na-alginate.

25 ENERGY STORAGE↗

The effect of charging rate on the graphite electrode of commercial lithium-ion cells: A post-mortem study

Increased charging rates negatively affect the lifetime of lithium-ion cells by increasing cell resistance and reducing capacity. This work is a post-mortem study of 18650 cells subjected to charge rates of 0.7-, 2-, 4-, and 6-C. For cells charged at 0.7-C to 4-C, this performance degradation is primarily related to surface film thickness with no observable change in surface film chemical composition. However, at charge rates of 6-C, the chemical composition of the surface film changes significantly, suggesting that this change is the reason for the sharper increase in cell resistance compared to the lower charge rates. In addition, we found that surface film formation was not uniform across the electrode. Surface film was thicker and chemically different along the central band of the electrode “jelly roll”. This result is most likely attributable to an increase in temperature that results from non-uniform electrode wetting during manufacture. As a result, this non-uniform change further resulted in active material delamination from the current collector owing to chemical changes to the binder for the cell charged at 6-C.

30 DIRECT ENERGY CONVERSION↗

X-ray nanotomography analysis of the microstructural evolution of LiMn 2 O 4 electrodes

One of the greatest challenges for advancing lithium-ion battery (LIB) technology is to minimize cell degradation during operation for long-term stability. To this end, it is important to understand how cell performance during operation relates to complex LIB microstructures. In this report, transmission X-ray microscopy (TXM) nanotomography is used to gain quantitative three-dimensional (3D) microstructure-performance correlations of LIB cathodes during cycling. The 3D microstructures of LiMn 2 O 4 (LMO) electrodes, cycled under different conditions, including cycle number, operating voltage, and temperature, are characterized via TXM and statistically analyzed to investigate the impact of cycling conditions on the electrode microstructural evolution and cell performance. It is found that the number of cracks formed within LMO particles correlated with capacity fade. For the cell cycled at elevated temperatures, which exhibits the most severe capacity fade among all cells tested, mechanical cracking observed in TXM is not the only dominant contributor to the observed degradation. Mn 2+ dissolution, as verified by detection of Mn on the counter electrode by energy dispersive spectrometry, also contributed. The current work demonstrate 3D TXM nanotomography as a powerful tool to help probe in-depth.

36 MATERIALS SCIENCE↗

Modulating electrode utilization in lithium-ion cells with silicon-bearing anodes

The stability of silicon-containing anodes can, in principle, be extended by constraining these electrodes to limited states of lithiation. Partial utilization of the anode lessens the volume changes experienced by silicon particles during cycling, which can mitigate mechanisms of performance degradation. In full-cells, anode utilization can be modulated by adjusting the relative capacities of the negative and positive electrodes - the N/P ratio. Here, we examine how the N/P ratio affects the long-term stability of Si-based full-cells, and investigate how this parameter would impact the cost and energy of realistic Li-ion cells. Here, we show that, for some configurations, cell failure due to rapid anode degradation can only by avoided at higher N/P ratios. The price of this enhanced stability is accelerated impedance rise at the cathode. Surprisingly, when electrode expansion is taken into account, increasing N/P ratio can actually increase the specific energy and energy density of silicon-rich Li-ion cells.

25 ENERGY STORAGE↗

Extreme fast charge aging: Effect of electrode loading and NMC composition on inhomogeneous degradation in graphite bulk and electrode/electrolyte interface

Empowering extreme fast charging (XFC) requires a comprehensive understanding of its application with advanced anode and cathode materials in lithium-ion batteries. No report exists for the full extent of limitations for the anode with crosstalk effect from paired cathode as well as Li plating due to electrode loading under XFC. In this study, a combination of cell testing and multiple length characterization is used to investigate XFC aging mechanism in cells with a low loading of 1.5 mAh cm -2 and high loading of 2.5 mAh cm -2 for graphite (Gr)/Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMCs). Operando XRD mappings show 1.5 mAh cm -2 loadings result in higher strain in graphite for all three cathode types. Among the three NMC cathodes, the graphite from NMC532 and NMC811 cells show comparable strain. Scanning electron microscopy (SEM) images show distinct differences between 6-C-charged anodes in two loadings. Significantly increased electrode thickness can be seen due to more damage in the graphite bulk and accumulation of the electrolyte decomposition products in electrode pores. X-ray photoelectron spectroscopy (XPS) reveals both cathode chemistry and Li plating influence the non-uniform SEI composition on graphite surface. We report higher Ni content in NMC811 promotes the higher levels of salt decomposition on the SEI and formation of higher mass of electrolyte aging products.

25 ENERGY STORAGE↗

La–Sr–Co oxide catalysts for oxygen evolution reaction in anion exchange membrane water electrolyzer: The role of electrode fabrication on performance and durability

Anion exchange membrane water electrolysis is an attractive technology for low-cost generation of “green” hydrogen by combining the use of noble metal-free catalysts with pure water feed. By thus addressing main drawbacks of the liquid alkaline electrolysis and proton exchange membrane water electrolysis, anion exchange membrane water electrolysis stands an excellent chance of replacing the two technologies. The development of active and stable platinum group metal (PGM)-free catalysts for oxygen evolution reaction (OER) is crucial for making anion exchange membrane water electrolyzers (AEMWEs) practical. For this work, we synthesized, characterized and tested two La–Sr–Co oxide-based OER catalysts. First, we characterized the catalysts by XRD, SEM, and N 2 physisorption and assessed their OER activity in a three-electrode cell. Next, we focused on electrode fabrication, demonstrating the importance of catalyst-ink application to the porous transport layers (PTLs) and a key role of adding a binder to the catalyst ink to prevent the catalyst detachment from the PTL in pure water. We tested three membrane electrode assemblies prepared using different formulations of the anode catalyst ink. The results show that the optimum ink formulation is essential for the performance on pure-water feed by maximizing OH - conductivity of the catalyst layer and catalyst-membrane interface.

47 OTHER INSTRUMENTATION↗

Correlation among porosity, mechanical properties, morphology, electronic conductivity and electrochemical kinetics of dry-processed electrodes

Dry processing (DP) has received great interest recently, which poses many advantages over the conventional slurry-based processing. Here, this work investigates the effect of compression on electrode mechanical properties, morphology, electronic conductivity, and electrochemical kinetics. Similar to the slurry-based electrodes, LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC) cathodes with intermediate porosity (i.e., 32%) demonstrate lowest charge transfer resistance, highest electronic conductivity and best rate performance. Fracture of NMC secondary particles is observed in the dry processed NMC cathodes. Reducing electrode porosity results in more fracture in the NMC secondary particles.

25 ENERGY STORAGE↗

Sequential separation of battery electrode materials and metal foils in aqueous media

To recycle high-value lithium-ion battery components, it is imperative to efficiently separate electrode materials from current collector foils and to separate cathodes from anodes. This study investigates the delamination behaviors of cathodes and anodes from their respective current collectors in aqueous media. Whereas anode films can easily detach from copper foils in water, the delamination of cathode films does not exhibit the same behavior in water; instead, the cation exchange reaction results in lithium leaching and aluminum corrosion in the presence of water. Here, a buffer solution with surfactant additives has been designed to prevent aluminum corrosion and to improve solution wetting behavior, thereby facilitating cathode delamination. The delamination difference enables the sequential recovery of electrode materials and metal foils at different separation stages, simplifying the traditionally intricate processes within a one-pot recovery system. The recovered materials retain their crystal structure and morphology, and there are no signs of aluminum corrosion or residues on the metal foils. The sequential separation technique achieves nearly 100% separation efficiency for electrode materials from metal foils and over 98% separation efficiency for cathode and anode materials.

25 ENERGY STORAGE↗

Zinc dendrite removal in a nickel-zinc battery with flow-through electrodes

The development and deployment of inexpensive energy storage technologies is critical to realizing a clean energy grid. Batteries are being used in this role, but there remains a need for research on systems that are designed specifically for stationary energy storage, with a focus on lowering the overall cost rather than prioritizing the system energy density, specific energy, and power output. Here, we report the development of ultra-thick (1 cm thick) electrodes with engineered flow channels and explore the variables determining how thick these electrodes can feasibly be. Our proof of concept cell, utilizing the alkaline Ni-Zn chemistry, shows stable cycling over the initial 60 cycles but still suffers from the common Zn dendrite growth at the anode. To extend the life of these systems we report our novel methodology to completely remove Zn dendrites by exploiting the flow-through nature of our electrode architecture.

Collins-Wildman, Daniel L↗

Blended conventional and high oxygen permeability ionomers as a fuel cell electrode binder

Ionomer strongly influences the performance of proton exchange membrane fuel cells (PEMFCs), affecting catalyst activity and reactant transport within the electrodes. While recent work on high oxygen permeability ionomers (HOPI) has demonstrated improved performance compared to conventional perfluorosulfonic acid (PFSA) ionomers such as Nafion™, there have also been reports of increased cracking in fabricated electrodes. We investigated the effects of blending HOPI with Nafion™ ionomer dispersions when fabricating cathode catalyst layers (CCLs). Small-angle x-ray scattering suggests that the ionomers mix well, and adsorption measurements indicate that HOPI adsorbs less strongly to the carbon-supported platinum (Pt) catalyst, and in blends, the Nafion™ ionomer exhibits a greater degree of adsorption. Imaging CCLs revealed a decrease in crack formation in blended samples as HOPI content decreased, with 14% HOPI having the lowest crack density. In a membrane electrode assembly (MEA) using a high surface area carbon support, the 14% HOPI blend exhibited similar performance to 100% HOPI. However, similar performance enhancements were not achieved with a medium surface area carbon support. These findings suggest a path for low-crack CCLs with enhanced oxygen transport, while highlighting a need for further investigation of ionomer blending towards efficient and durable PEMFCs.

25 ENERGY STORAGE↗

Silver nanowire based flexible electrodes with improved properties: High conductivity, transparency, adhesion and low haze

Graphical abstract: This graphical abstract illustrates the schematic representation of the main drawbacks and rectifications for AgNWs based transparent electrodes. - Highlights: • Films exhibited low sheet resistance and optical properties with R{sub s} ≤ 30 Ω/□ and T ≥ 90%. • We decreased haze to 2% by controlling AgNWs length, diameter, and concentration. • We achieved good adhesion for AgNWs on PET film. • There is no significant change in resistance in the bending angle from 0° to 180°, and on twisting. - Abstract: Recent work has been focusing on solution processable transparent electrodes for various applications including solar cells and displays. As well as, the research aims majorly at silver nanowires (AgNWs) to replace ITO. We enhance the transparent electrode performance as a function of optical and mechanical properties with low sheet resistance, by controlling the AgNWs accept ratios, ink composition, and processing conditions. The nanowire network of transparent films agrees with the 2D percolation law. The film transmittance values at 550 nm are coping with a reference ITO film. Sheet resistance and haze values are suitable for flexible electronic applications. We fabricate transparent flexible film using a low-cost processing technique.

36 MATERIALS SCIENCE↗

Synthesis of visible-light absorbing CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays electrode with enhanced photoelectrochemical performance

Graphical abstract: - Highlights: • TiO{sub 2} nanotube sensitized with CoFe{sub 2}O{sub 4} nanocrystals was synthesized by a facile hydrothermal method. • CoFe{sub 2}O{sub 4} nanocrystals were loaded to the outer and inner surface of TiO{sub 2} nanotube. • The CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube electrode has a strong photoresponse to the light. - Abstract: TiO{sub 2} nanotube arrays sensitized with CoFe{sub 2}O{sub 4} nanocrystals were successfully synthesized via a facile hydrothermal method. The as-prepared sample was studied by X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDX) to characterize its phase structure, morphology and chemical composition. Enhanced absorption in both UV and visible-light regions was observed for the CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays. The photocurrent density of CoFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotube arrays electrode was 30 times as great as that of bare TiO{sub 2} nanotube arrays electrode.

36 MATERIALS SCIENCE↗

Successive ionic layer adsorption and reaction deposited kesterite Cu{sub 2}ZnSnS{sub 4} nanoflakes counter electrodes for efficient dye-sensitized solar cells

Highlights: • Cu{sub 2}ZnSnS{sub 4} nanoflakes by SILAR technique. • Hydrothermal synthesis of TiO{sub 2}. • Counter electrode for DSSC application. • 4.48% conversion efficiency. - Abstract: In this investigation, we have successfully synthesized Cu{sub 2}ZnSnS{sub 4} (CZTS) nanoflakes by successive ionic layer adsorption and reaction (SILAR) method and used as a counter electrode in the hydrothermally grown TiO{sub 2} based dye sensitized solar cells (DSSCs). The prepared CZTS nanoflakes were characterized using X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), micro Raman spectroscopy and energy dispersive analysis. Our DSSCs results revealed that, compared with conventional Pt/FTO counter electrode DSSCs, nanoflakes of p-type CZTS as the photocathode and n-type TiO{sub 2} thin films as the photoanode shows an increased short circuit current (13.35 mA/cm{sup 2}) with 4.84% power conversion efficiency. The detailed interface properties of were analyzed by electrochemical impedance spectroscopy (EIS) measurements.

36 MATERIALS SCIENCE↗

Simultaneous determination of hydrazine and phenyl hydrazine using 4′-(4-carboxyphenyl)-2,2′:6′,2″ terpyridine diacetonitrile triphenylphosphine ruthenium(II) tetrafluoroborate complex functionalized multiwalled carbon nanotubes modified electrode

Highlights: • A nanocomposite of ruthenium(II) terpyridine, triphenylphosphine based complex and multiwalled carbon nanotubes have been used first time for simultaneous detection of hydrazine and phenyl hydrazine. • The detection limit reported is lower as compared to other reported works. • The paper also focuses towards effect of ligand variation attached to ruthenium(II) terpyridine based complexes complex for the hydrazine and phenyl hydrazine detection. • Nanocomposite does not involve any biological entity hence high stability. - Abstract: A nanocomposite based on the incorporation of the complex 4′-(4-carboxyphenyl)-2,2′:6′,2″ terpyridine triphenylphosphine diacetonitrile ruthenium(II) tetrafluoroborate with multiwalled carbon nanotubes and ionomer supported upon a glassy carbon electrode substrate is reported and characterized with scanning electron microscopy, transmission electron microscopy and infrared spectroscopy. The electrochemical behavior and stability of the composite electrode was investigated via cyclic voltammetry. The modified electrode exhibits an electro-catalytic activity towards the oxidation of both hydrazine and phenyl hydrazine in 0.1 M phosphate buffer solution (PBS, pH 7.4). The oxidation of hydrazine and phenyl hydrazine occurs at 0.81 V and 0.32 V with limit of detection found to be 3.7 × 10{sup −7} M and 1.15 × 10{sup −7} M and having a linear range from 5 × 10{sup −6} M to 6.5 × 10{sup −3} M, and 5 × 10{sup −6} M to 0.2 × 10{sup −3} M, respectively.

36 MATERIALS SCIENCE↗

Enhanced photoelectrochemical water splitting from Si quantum dots/TiO{sub 2} nanotube arrays composite electrodes

Graphical abstract: Si quantum dots were firstly applied to modify TiO{sub 2} nanotubes and enhanced visible light response was demonstrated for the resulted Si QDs/TiO{sub 2} nanocomposite. Si QDs are promising in photoelectrochemical water splitting and photocatalysis since their low cost, abundance and environmentally-friendliness. - Highlights: • A novel nanocomposite Si QDs/TiO{sub 2} nanotubes was fabricated and characterized. • Enhanced photoelectrochemical water splitting was firstly demonstrated for Si QDs/TiO{sub 2}. • The visible light response of TiO{sub 2} increased with the presence of Si QDs. - Abstract: This work firstly introduced Si quantum dots (QDs) to modify TiO{sub 2} nanotube arrays for photoelectrochemical water splitting. A systematic study using surface and optical characterization tools reveals the nature of the combination of Si QDs and TiO{sub 2} nanotube arrays. Scanning electron microscopy and X-ray photoelectron spectroscopy results show that Si QDs were assembled on the surface of vertically aligned TiO{sub 2} nanotube arrays. The UV–vis diffuse reflectance spectra indicate the improved visible light absorbance. The enhanced photoelectrochemical water splitting was demonstrated under visible light illumination and the photocurrent density was 1.6 times larger than that of pristine TiO{sub 2} electrodes. Electrochemical impedance behavior was measured for the electrodes and the impedance is slightly reduced for the nanocomposite electrode with the presence of Si QDs. This work demonstrated that Si QDs would be a novel and effective choice for improving the utilization of visible light for TiO{sub 2} nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A core–shell structured nanocomposite of NiO with carbon nanotubes as positive electrode material of high capacitance for supercapacitors

Highlights: • A core–shell structured NiO@CNTs nanocomposite is synthesized by a simple hydrothermal method. • The CNTs core effectively improves the capacitance, rate and cycling performance of NiO. • A supercapacitor is assembled when activated carbon is used as the negative electrode. • The supercapacitor presents an energy density up to 52.6 Wh kg{sup −1}. - Abstract: A nanocomposite of carbon nanotubes coated with nickel oxide was prepared by a simple hydrothermal method. The structure, morphology and electrochemical performance of the nanocomposite were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy, electrochemical tests including cyclic voltammogram, galvanostatic charge–discharge and electrochemical impedance spectroscopy, respectively. It presents the highest specific capacitance of 1844 F g{sup −1} at 1 A g{sup −1} and 1145 F g{sup −1} at current density of 10 A g{sup −1} with 88.9% (at 1 A g{sup −1}) capacitance retention after 1000 cycles. The specific capacitance of the nanocomposite is almost double of that of the virginal NiO (972 F g{sup −1} at 1 A g{sup −1}). Its cycling behavior is also very good. When combined with activated carbon as the negative electrode, the energy density can be up to 52.6 Wh kg{sup −1}. Such good electrochemical behavior indicates that the nanocomposite is a promising electrode material for supercapacitors.

36 MATERIALS SCIENCE↗

Advanced negative electrode of Fe{sub 2}O{sub 3}/graphene oxide paper for high energy supercapacitors

Highlights: • Novel Fe{sub 2}O{sub 3}/GP (graphene paper) negative electrode for supercapacitors was prepared. • The capacitance of Fe{sub 2}O{sub 3}/GP was ∼3.08 F cm{sup −2} at the density of 5 mA cm{sup −2}. • The Fe{sub 2}O{sub 3}/GP also showed good stability in long-term cyclic process. - Abstract: The development of Fe{sub 2}O{sub 3} with high conductivity and energy density is crucial for practical utilizations of supercapacitors. Here, we demonstrated the preparation of novel Fe{sub 2}O{sub 3}/graphene oxide paper (Fe{sub 2}O{sub 3}/GP) hybrid electrode for high density supercapacitors. Due to the characteristic features of large surface areas and fast electron transportation, the specific areal capacitance of the Fe{sub 2}O{sub 3}/GP was around 3.08 F cm{sup −2} at the charge-discharge current density of 5 mA cm{sup −2}, which is nearly 14 times of the Fe{sub 2}O{sub 3}/carbon paper (Fe{sub 2}O{sub 3}/CP, 0.22 F cm{sup −2}). More importantly, the Fe{sub 2}O{sub 3}/GP hybrid electrode also retained about 95% of the initial capacitance after long-term cyclic process. These findings would help us to develop high effective and stable materials for energy storage devices.

36 MATERIALS SCIENCE↗

Hierarchical NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets as electrode materials for supercapacitor and Li ion battery applications

Highlights: • NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are synthesized by solvothermal reaction. • The prepared NiCo{sub 2}O{sub 4} structures possess excellent electrochemical properies. • The hierarchica electrode materials might potential applications for energy storage devices. - Abstract: In this work, NiCo{sub 2}O{sub 4} nanowalls composed of ultrathin nanosheets are fabricated successfully on Ni foam by a facile one-pot solvothermal method followed by thermolysis of the precursors. The as-prepared NiCo{sub 2}O{sub 4} products are evaluated as electrode materials for supercapacitors and lithium ion batteries. The results show high discharge capacitance of 925 mF/cm{sup 2} at a current density of 5 mA/cm{sup 2}, with remarkable cycling stability (about 24.2% loss after 6000 cycles) and excellent rate performance (71.5% capacitance retention with current density range from 1 mA/cm{sup 2} to 20 mA/cm{sup 2}). In addition, Ni foam supported NiCo{sub 2}O{sub 4} nanowalls possess excellent discharge capacity of 1100 mAh/g as lithium ion battery anode at a current density of 100 mA/g. The excellent electrochemical performance of NiCo{sub 2}O{sub 4} nanowalls could be ascribed to the unique spatial structure composed of interconnected ultrathin nanosheets, which facilitates ion penetration and electron transportation, demonstrating their potential applications as electrode materials for high performance supercapacitors and lithium ion batteries.

36 MATERIALS SCIENCE↗