Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic Timing Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Experimental Validation of Approximate Dynamic Programming Based Optimization and Convergence on Microgrid Applications

Stochastic optimization can better address uncertainties in power system problems. However, when state space and action space become large, many existing approaches become computationally expensive and even infeasible. Approximate dynamic programming (ADP) attracts researchers’ attention as a powerful tool for solving power system optimization problems with reduced computational cost. In this paper, in light of the existing literature, we investigate how the ADP approach with post-decision value function approximation converges to the nearly optimal solution with improved computational speed and experimentally validate the performance of the approach for a microgrid energy optimization problem. The approximation error versus the number of iteration is studied for convergence analysis of the post-decision ADP. A flowchart is provided to illustrate the proposed ADP algorithm for a microgrid energy optimization problem. The performance of ADP and dynamic programming (DP) is compared in terms of optimization error and computational time. It has found that the post-decision ADP approach can achieve competitive optimality with improved computational speed compared to the traditional DP.

Das, Avijit↗

SDSS J001641-000925: THE FIRST STABLE RED DWARF CONTACT BINARY WITH A CLOSE-IN STELLAR COMPANION

SDSS J001641-000925 is the first red dwarf contact binary star with an orbital period of 0.19856 days that is one of the shortest known periods among M-dwarf binary systems. The orbital period was detected to be decreasing rapidly at a rate of P-dot ∼8 s yr{sup −1}. This indicated that SDSS J001641-000925 was undergoing coalescence via a dynamical mass transfer or loss and thus this red dwarf contact binary is dynamically unstable. To understand the properties of the period change, we monitored the binary system photometrically from 2011 September 2 to 2014 October 1 by using several telescopes in the world and 25 eclipse times were determined. It is discovered that the rapid decrease of the orbital period is not true. This is contrary to the prediction that the system is merging driven by rapid mass transfer or loss. Our preliminary analysis suggests that the observed minus calculated (O–C) diagram shows a cyclic oscillation with an amplitude of 0.00255 days and a period of 5.7 yr. The cyclic variation can be explained by the light travel time effect via the presence of a cool stellar companion with a mass of M {sub 3}sin i' ∼ 0.14 M {sub ☉}. The orbital separation between the third body and the central binary is about 2.8 AU. These results reveal that the rarity of red dwarf contact binaries could not be explained by rapidly dynamical destruction and the presence of the third body helps to form the red dwarf contact binary.

79 ASTRONOMY AND ASTROPHYSICS↗

Exploiting fission chain reaction dynamics to image fissile materials

Radiation imaging is one potential method to verify nuclear weapons dismantlement. In this work, we present a method to discriminate between non-multiplying and multiplying neutron sources using a neutron coded aperture imaging system. This method applies time-correlated pulse-height (TCPH) analysis to identify neutrons in fission chain reactions and recreate images using only these events. This analysis was applied to measurements of weapons-grade plutonium (WGPu) metal and 252 Cf performed at the Nevada National Security Site (NNSS) Device Assembly Facility in July 2015. The results demonstrate it is possible to eliminate the non-fissile 252 Cf source from the image while preserving the fissile WGPu source. TCPH analysis was also applied to additional scenes in which the WGPu and 252 Cf sources were measured individually. The results of these separate measurements further demonstrate the ability to remove the non-fissile 252 Cf source and retain the fissile WGPu source. Simulations performed using MCNPX-PoliMi indicate that in a one hour measurement, hollow WGPu spheres are retained at a 1σ level for neutron multiplications M ≃ 2:7 and above. This work has potential application to dismantlement verification where it may be valuable to verify that all neutron sources in an image are multiplying.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiscale Analysis of Nonlinear Systems Using Computational Topology

Computational Homology in Fluids: M. Schatz, K. Mischaikow. This effort focused on characterizing both the structure and dynamics of complex spatio-temporal flows that arise in thermal convection. Microstructure Characterization: T. Wanner, K. Mischaikow. We extended our previous work on studying the time evolution of patterns associated with phase separation in conserved concentration fields. Probabilistic Homology Validation: W. Kalies, T. Wanner, K. Mischaikow. Our above mentioned work on microstructure characterization is based on numerically studying the homology of certain sublevel sets of a function, whose evolution is described by deterministic or stochastic evolution equations. Computational Homology and Dynamics: W. Kalies, T. Wanner, K. Mischaikow. Topological methods can be used to rigorously describe the dynamics of nonlinear systems. We are approaching this problem from several perspectives and through a variety of systems. Stress Networks in Polycrystals: T. Wanner. Together with E. Fuller (NIST) and D. Saylor (FDA) we have characterized stress networks in polycrystals. This part of the project is aimed at developing homological metrics which can aid in distinguishing not only microstructures, but also derived mechanical response fields. Microstructure-Controlled Drug Release: K. Mischaikow, T. Wanner. This part of the project is concerned with the development of topological metrics in the context of controlled drug delivery systems, such as drug-eluting stents. We are particularly interested in developing metrics which can be used to link the processing stage to the resulting microstructure, and ultimately to the achieved system response in terms of drug release profiles. Microstructure of Fuel Cells: W. Kalies, K. Mischaikow. In collaboration with P. Voorhees (Northwestern Univ.) and M. Gameiro (Rutgers) we have been using our computational homology software to analyze the topological structure of the void, metal and ceramic components of a Solid Oxide Fuel Cell.

97 MATHEMATICS AND COMPUTING↗

Coupled slow and fast surface dynamics in an electrocatalytic oscillator: Model and simulations

The co-existence of disparate time scales is pervasive in many systems. In particular for surface reactions, it has been shown that the long-term evolution of the core oscillator is decisively influenced by slow surface changes, such as progressing deactivation. Here we present an in-depth numerical investigation of the coupled slow and fast surface dynamics in an electrocatalytic oscillator. The model consists of four nonlinear coupled ordinary differential equations, investigated over a wide parameter range. Besides the conventional bifurcation analysis, the system was studied by means of high-resolution period and Lyapunov diagrams. It was observed that the bifurcation diagram changes considerably as the irreversible surface poisoning evolves, and the oscillatory region shrinks. The qualitative dynamics changes accordingly and the chaotic oscillations are dramatically suppressed. Nevertheless, periodic cascades are preserved in a confined region of the resistance vs. voltage diagram. Numerical results are compared to experiments published earlier and the latter reinterpreted. Finally, the comprehensive description of the time-evolution in the period and Lyapunov diagrams suggests further experimental studies correlating the evolution of the system's dynamics with changes of the catalyst structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase-space analysis of teleparallel dark energy

We perform a detailed dynamical analysis of the teleparallel dark energy scenario, which is based on the teleparallel equivalent of General Relativity, in which one adds a canonical scalar field, allowing also for a nonminimal coupling with gravity. We find that the universe can result in the quintessence-like, dark-energy-dominated solution, or to the stiff dark-energy late-time attractor, similarly to standard quintessence. However, teleparallel dark energy possesses an additional late-time solution, in which dark energy behaves like a cosmological constant, independently of the specific values of the model parameters. Finally, during the evolution the dark energy equation-of-state parameter can be either above or below -1, offering a good description for its observed dynamical behavior and its stabilization close to the cosmological-constant value.

79 ASTRONOMY AND ASTROPHYSICS↗

Time and Frequency Domain Methods for Basis Selection in Random Linear Dynamical Systems

Polynomial chaos methods have been extensively used to analyze systems in uncertainty quantification. Furthermore, several approaches exist to determine a low-dimensional approximation (or sparse approximation) for some quantity of interest in a model, where just a few orthogonal basis polynomials are required. In this work, we consider linear dynamical systems consisting of ordinary differential equations with random variables. The aim of this paper is to explore methods for producing low-dimensional approximations of the quantity of interest further. We investigate two numerical techniques to compute a low-dimensional representation, which both fit the approximation to a set of samples in the time domain. On the one hand, a frequency domain analysis of a stochastic Galerkin system yields the selection of the basis polynomials. It follows a linear least squares problem. On the other hand, a sparse minimization yields the choice of the basis polynomials by information from the time domain only. An orthogonal matching pursuit produces an approximate solution of the minimization problem. Finally, we compare the two approaches using a test example from a mechanical application.

97 MATHEMATICS AND COMPUTING↗

Elastic deformation as a tool to investigate watershed storage connectivity

Storage-discharge relationships and dynamic changes in storage connectivity remain key unknowns in understanding and predicting watershed behavior. In this study, we use Global Positioning System measurements of load-induced Earth surface displacement as a proxy for total water storage change in four climatologically diverse mountain watersheds in the western United States. Comparing total water storage estimates with stream-connected storage derived from hydrograph analysis, we find that each of the investigated watersheds exhibits a characteristic seasonal pattern of connection and disconnection between total and stream-connected storage. We investigate how the degree and timing of watershed-scale connectivity is related to the timing of precipitation and seasonal changes in dominant hydrologic processes. Our results show that elastic deformation of the Earth due to water loading is a powerful new tool for elucidating dynamic storage connectivity and watershed discharge response across scales in space and time.

Environmental Sciences & Ecology↗

Ultrafast Rydberg-state dissociation in oxygen: Identifying the role of multielectron excitations

We investigated the fragmentation dynamics of highly excited states of molecular oxygen using femtosecond transient photoelectron spectroscopy. An extreme ultraviolet (XUV) pulse populates the autoionizing Rydberg series converging to O$_2^+$c 4 Σ$_u^-$, and a femtosecond near-infrared (IR) pulse was used to photoionize these states as they dissociate. Monitoring the differential photoelectron spectra as a function of time delay allowed us to obtain the relaxation lifetimes of these Rydberg states. We observed a photoelectron signal corresponding to the formation of a 4 p excited atomic oxygen fragment, which is not an expected dissociation product of the (O$_2^+$c 4 Σ$_u^-$) nl σ g Rydberg series. Analysis of the time-dependent photoelectron spectra and photoionization calculations indicate that this fragment results from a previously unexplored (O$_2^+$ 4 II$_g$)4 p repulsive state and that, contrary to expectations, this multielectron excitation pathway presents a substantial cross section. Here, our study demonstrates that two-color time-resolved differential photoelectron spectroscopy is an excellent tool to study the fragmentation dynamics of such multielectron excited states, which are not easily probed by other means.

74 ATOMIC AND MOLECULAR PHYSICS↗

DefectTrack: a deep learning-based multi-object tracking algorithm for quantitative defect analysis of in-situ TEM videos in real-time

Abstract In-situ irradiation transmission electron microscopy (TEM) offers unique insights into the millisecond-timescale post-cascade process, such as the lifetime and thermal stability of defect clusters, vital to the mechanistic understanding of irradiation damage in nuclear materials. Converting in-situ irradiation TEM video data into meaningful information on defect cluster dynamic properties (e.g., lifetime) has become the major technical bottleneck. Here, we present a solution called the DefectTrack , the first dedicated deep learning-based one-shot multi-object tracking (MOT) model capable of tracking cascade-induced defect clusters in in-situ TEM videos in real-time. DefectTrack has achieved a Multi-Object Tracking Accuracy (MOTA) of 66.43% and a Mostly Tracked (MT) of 67.81% on the test set, which are comparable to state-of-the-art MOT algorithms. We discuss the MOT framework, model selection, training, and evaluation strategies for in-situ TEM applications. Further, we compare the DefectTrack with four human experts in quantifying defect cluster lifetime distributions using statistical tests and discuss the relationship between the material science domain metrics and MOT metrics. Our statistical evaluations on the defect lifetime distribution suggest that the DefectTrack outperforms human experts in accuracy and speed.

42 ENGINEERING↗

Solvation structure of the halides from x-ray absorption spectroscopy

Three-dimensional models for the aqueous solvation structures of chloride, bromide, and iodide are reported. K-edge extended X-ray absorption fine structure (EXAFS) and Minuit X-ray absorption near edge (MXAN) analyses found well-defined single shell solvation spheres for bromide and iodide. However, dissolved chloride proved structurally distinct, with two solvation shells needed to explain its strikingly different X-ray absorption near edge structure (XANES) spectrum. Final solvation models were as follows: iodide, 8 water molecules at 3.60 ± 0.13 Å and bromide, 8 water molecules at 3.40 ± 0.14 Å, while chloride solvation included 7 water molecules at 3.15 ± 0.10 Å, and a second shell of 7 water molecules at 4.14 ± 0.30 Å. Each of the three derived solvation shells is approximately uniformly disposed about the halides, with no global asymmetry. Time-dependent density functional theory calculations simulating the chloride XANES spectra following from alternative solvation spheres revealed surprising sensitivity of the electronic state to 6-, 7-, or 8-coordination, implying a strongly bounded phase space for the correct structure during an MXAN fit. MXAN analysis further showed that the asymmetric solvation predicted from molecular dynamics simulations using halide polarization can play no significant part in bulk solvation. Classical molecular dynamics used to explore chloride solvation found a 7-water solvation shell at 3.12 (−0.04/+0.3) Å, supporting the experimental result. These experiments provide the first fully three-dimensional structures presenting to atomic resolution the aqueous solvation spheres of the larger halide ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlations and Cascades in Magnetized Turbulence

Many terrestrial and astrophysical plasmas encompass very large dynamical ranges in space and time, which are not accessible by direct numerical simulations. Thus, idealized subvolumes are often used to study small-scale effects including the dynamics of magnetized turbulence. A significant aspect of magnetized turbulence is the transfer of energy from large to small scales, in part through the operation of a turbulent cascade. In this work, we present a new shell-to-shell energy transfer analysis framework for understanding energy transfer within magnetized turbulence and in particular, through the cascade. We demonstrate the viability of this framework through application to a series of isothermal subsonic and supersonic simulations of compressible magnetized turbulence and utilize results from this analysis to establish a non-linear benchmark for compressible magnetized turbulence in the subsonic regime. We further study how the autocorrelation time of the driving and its normalization systematically change properties of compressible magnetized turbulence. For example, we find that 6-in-time forcing with a constant energy injection leads to a steeper slope in kinetic energy spectrum and less efficient small-scale dynamo action. We examine how these results can impact a range of diagnostics relevant for a range of terrestrial and astrophysical applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigating the Origins of Two Extreme Solar Particle Events: Proton Source Profile and Associated Electromagnetic Emissions

We analyze the high-energy particle emission from the Sun in two extreme solar particle events in which protons are accelerated to relativistic energies and can cause a significant signal even in the ground-based particle detectors. Analysis of a relativistic proton event is based on modeling of the particle transport and interaction, from a near-Sun source through the solar wind and the Earth’s magnetosphere and atmosphere to a detector on the ground. This allows us to deduce the time profile of the proton source at the Sun and compare it with observed electromagnetic emissions. The 1998 May 2 event is associated with a flare and a coronal mass ejection (CME), which were well observed by the Nançay Radioheliograph, thus the images of the radio sources are available. For the 2003 November 2 event, the low corona images of the CME liftoff obtained at the Mauna Loa Solar Observatory are available. Those complementary data sets are analyzed jointly with the broadband dynamic radio spectra, EUV images, and other data available for both events. We find a common scenario for both eruptions, including the flare’s dual impulsive phase, the CME-launch-associated decimetric-continuum burst, and the late, low-frequency type III radio bursts at the time of the relativistic proton injection into the interplanetary medium. The analysis supports the idea that the two considered events start with emission of relativistic protons previously accelerated during the flare and CME launch, then trapped in large-scale magnetic loops and later released by the expanding CME.

79 ASTRONOMY AND ASTROPHYSICS↗

Elucidating the Onset of Plasticity in Sliding Contacts Using Differential Computational Orientation Tomography

Abstract Depending on the mechanical and thermal energy introduced to a dry sliding interface, the near-surface regions of the mated bodies may undergo plastic deformation. In this work, we use large-scale molecular dynamics simulations to generate “differential computational orientation tomographs” (dCOT) and thus highlight changes to the microstructure near tribological FCC alloy surfaces, allowing us to detect subtle differences in lattice orientation and small distances in grain boundary migration. The analysis approach compares computationally generated orientation tomographs with their undeformed counterparts via a simple image analysis filter. We use our visualization method to discuss the acting microstructural mechanisms in a load- and time-resolved fashion, focusing on sliding conditions that lead to twinning, partial lattice rotation, and grain boundary-dominated processes. Extracting and laterally averaging the color saturation value of the generated tomographs allows us to produce quantitative time- and depth-resolved maps that give a good overview of the progress and severity of near-surface deformation. Corresponding maps of the lateral standard deviation in the color saturation show evidence of homogenization processes occurring in the tribologically loaded microstructure, frequently leading to the formation of a well-defined separation between deformed and undeformed regions. When integrated into a computational materials engineering framework, our approach could help optimize material design for tribological and other deformation problems. Graphic Abstract .

36 MATERIALS SCIENCE↗

Freshwater carbon and nutrient cycles revealed through reconstructed population genomes

Although microbes mediate much of the biogeochemical cycling in freshwater, the categories of carbon and nutrients currently used in models of freshwater biogeochemical cycling are too broad to be relevant on a microbial scale. One way to improve these models is to incorporate microbial data. Here, we analyze both genes and genomes from three metagenomic time series and propose specific roles for microbial taxa in freshwater biogeochemical cycles. Our metagenomic time series span multiple years and originate from a eutrophic lake (Lake Mendota) and a humic lake (Trout Bog Lake) with contrasting water chemistry. Our analysis highlights the role of polyamines in the nitrogen cycle, the diversity of diazotrophs between lake types, the balance of assimilatory vs. dissimilatory sulfate reduction in freshwater, the various associations between types of phototrophy and carbon fixation, and the density and diversity of glycoside hydrolases in freshwater microbes. We also investigated aspects of central metabolism such as hydrogen metabolism, oxidative phosphorylation, methylotrophy, and sugar degradation. Finally, by analyzing the dynamics over time in nitrogen fixation genes and Cyanobacteria genomes, we show that the potential for nitrogen fixation is linked to specific populations in Lake Mendota. This work represents an important step towards incorporating microbial data into ecosystem models and provides a better understanding of how microbes may participate in freshwater biogeochemical cycling.

58 GEOSCIENCES↗