Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dissolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Understanding the high-temperature behavior and corrosion resistance of Cr-Nb coated cladding for BWRs

While Cr-coated Accident Tolerant Fuel has proven successful in Pressurized Water Reactors, its dissolution in high dissolved oxygen Boiling Water Reactor environments represents a major technological barrier. Here, this study presents a comprehensive evaluation of novel Cr-Nb alloys as a coating breakthrough solution for Accident Tolerant Fuel cladding in Boiling Water Reactors. We systematically investigated Physical Vapor Deposited Cr-Nb coatings with 13% and 24 at% Nb content on commercial Zr-based cladding through rigorous testing under both normal and accident conditions. Our results demonstrate Cr-Nb coatings remained completely intact during extended Boiling Water Reactor autoclave testing, while pure Cr coatings failed catastrophically due to oxide dissolution. Under Loss-of-Coolant Accident conditions at 1100°C, Cr-Nb coatings maintained protective capability for 45 min. At 800°C, the alloy coatings matched pure Cr's excellent corrosion resistance. Despite microstructural changes during prolonged high-temperature exposure, no coating delamination occurred, ensuring continued protection of the underlying Zr substrate. These findings establish Cr-Nb coatings as a viable Accident Tolerant Fuel solution for Boiling Water Reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Inorganic Carbon Turnover caused by Digestion of Carbonate Sands and Metabolic Activity of Holothurians

Recent measurements have shown that holothurians (sea cucumbers) play an important role in the cycling of CaCO3 in tropical coral reef systems through ingestion and processing of carbonate sediment. In this study inorganic additional aspects of carbon turnover were determined in laboratory incubations of Holothuria atra, H. leucospilota and Stichopus herrmanni from One Tree Reef, Great Barrier Reef. The pH values of the gut lumen ranged from 6.1 to 6.7 in animals with empty digestive tracts as opposed to 7.0 to 7.6 when digestive tracts were filled with sediment. Empty gut volume estimates for H. atra and S. herrmanni were 36 ± 4 mL and 151 ± 14 mL, respectively. Based on these measurements it is estimated that these species process 19 ± 2kg and 80 ± 7kg CaCO3 sand yr-1 per individual, respectively. The annual dissolution rates of H. atra and S. herrmanni of 6.5±1.9g and 9.6±1.4g, respectively, suggest that 0.05±0.02% and 0.1±0.02% of the CaCO3 processed through their gut annually is dissolved. During the incubations the CaCO3 dissolution was 0.07±0.01%, 0.04±0.01% and 0.21±0.05% of the fecal casts for H. atra, H. leucospilota and S. herrmanni, respectively. The CaCO3 saturation state for both aragonite and calcite minerals during laboratory incubations decreased markedly due to a greater increase in dissolved inorganic carbon (DIC) relative to total alkalinity (AT) as a result of respiration by the animals. Our results support the hypothesis that deposit feeders such as sea cucumbers play an important ecological role in the coral reef CaCO3 cycle.

activity↗

Pt Catalyst Degradation in Aqueous and Fuel Cell Environments studied via In-Operando Anomalous Small-Angle X-ray Scattering

The evolution of Pt nanoparticle cathode electrocatalyst size distribution in a polymer electrolyte membrane fuel cell (PEMFC) was followed during accelerated stress tests using in-operando anomalous small-angle X-ray scattering (ASAXS). This evolution was compared to that observed in an aqueous electrolyte environment using stagnant electrolyte, flowing electrolyte, and flowing electrolyte at elevated temperature to reveal the different degradation trends in the PEMFC and aqueous environments and to determine the relevance of aqueous measurements to the stability of Pt nanoparticle catalyst in the fuel cell environment. The observed changes in the particle size distributions (PSDs) were analyzed to elucidate the extent and mechanisms of particle growth and corresponding mass and active surface area losses in the different environments. These losses indicate a Pt nanoparticle surface area loss mechanism controlled by Pt dissolution, the particle size dependence of Pt dissolution, the loss of dissolved Pt into the membrane and electrolyte, and, to a lesser extent, the re-deposition of dissolved Pt onto larger particles. Based on the geometric surface area loss, mass loss, and mean particle size increase trends, the aqueous environment best reflecting the fuel cell environment was found to be one in which the electrolyte is flowing rather than stagnant. Pt nanoparticle surface area loss resulting from potential cycling can be inhibited by reducing the number of particles smaller than a critical particle diameter (CPD), which was found to be similar to 3.5 to similar to 4 nm, with the CPD dependent on both the cycling protocol (square wave vs triangle wave) and the catalyst environment (fuel cell, aqueous stagnant, aqueous flowing electrolyte, or elevated temperature flowing electrolyte)

Anomalous small-angle X-ray scattering↗

Understanding the Origin of Irreversible Capacity loss in Non-Carbonized Carbonate - based Metal Organic Framework (MOF) Sulfur hosts for Lithium - Sulfur battery

Li-Sulfur (Li-S) batteries are emergent next-generation energy storage devices due to their very high specific energy density (~2567 Wh g -1 ) but are limited by polysulfide dissolution issues. In this paper, chemically synthesized sulfur containing non-carbonized metal organic framework (S-MOF) cathodes show initial specific capacities of 1476 mAh g -1 stabilizing at ~609 mAh g -1 with almost no fade for over 200 cycles. Post-cycled separators of the S – MOF cathodes display complete absence of polysulfides after cycle 1, 20 and 200, respectively. It was identified that the occurrence of carbonate species in the MOF structure resulted in the formation of C-S bonded species causing retention of polysulfide at the electrode surface ensuring long-term stability. However, this observed capacity drop during the first 10 cycles is attributed to the oxidation of some of the infiltrated sulfur by the MOF as determined by electrochemical and X-ray photoelectron spectroscopy (XPS) analyses. Nevertheless, the negligible fade rate (0.0014% cycle -1 ) and complete prevention of polysulfide dissolution renders these cathodes most promising candidates for Li-S batteries. Finally, understanding of this transformation behavior in sulfur-containing MOF is essential to engineer chemically-bonded host-structures capable of efficient polysulfide trapping, a key pathway to establishing novel platforms for achieving high power Li – S batteries.

25 ENERGY STORAGE↗

On the impact of temperatures up to 200°C in clay repositories with bentonite engineer barrier systems: A study with coupled thermal, hydrological, chemical, and mechanical modeling

One of the most important design variables for a geological nuclear waste repository is the temperature limit up to which the engineered barrier system (EBS) and the natural geologic environment can be exposed. Up to now, almost all design concepts that involve bentonite-backfilled emplacement tunnels have chosen a maximum allowable temperature of about 100°C. Such a choice is largely based on the consideration that in clay-based materials illitization and the associated mechanical changes in the bentonite (and perhaps the clay host rock) could affect the barrier attributes of the EBS. However, existing experimental and modeling studies on the occurrence of illitization and related performance impacts are not conclusive, in part because the relevant couplings between the thermal, hydrological, chemical, and mechanical (THMC) processes have not been fully represented in the models. This work presents a fully coupled THMC simulation of a nuclear waste repository in a clay formation with a bentonite-backfilled EBS for 1000 years. Two scenarios were simulated for comparison: a case in which the temperature in the bentonite near the waste canister can reach about 200°C and a case in which the temperature in the bentonite near the waste canister peaks at about 100°C. The model simulations demonstrate some degree of illitization in both the bentonite buffer and the surrounding clay formation. Other chemical alterations include the dissolution of K-feldspar and calcite, and precipitation of quartz, chlorite, and kaolinite. In general, illitization in the bentonite and the clay formation is enhanced at higher temperature. However, the quantity of illitization is affected by many chemical factors and therefore varies a great deal. The most important chemical factors are the concentration of K in the pore water as well as the abundance and dissolution rate of K-feldspar; less important ones are the concentration of sodium and the quartz precipitation rate. In our modeling scenarios, the calculated decrease in smectite volume fraction in bentonite ranges from 1 to 8% of the initial volume fraction of smectite in the 100°C scenario and 1–27% in the 200°C scenario. Chemical changes in the 200°C scenario could also lead to a reduction in swelling stress up to 15–18% whereas those in the 100°C scenario result in about 14–15% reduction in swelling stress for the base case scenario. Model results also show that the 200°C scenario results in a much higher total stress than the 100°C scenario, mostly due to thermal pressurization. While cautions should be taken regarding the model results due to some limitations in the models, the modeling work is illustrative in light of the relative importance of different processes occurring in EBS bentonite and clay formation at higher than 100°C conditions, and could be of greater use when site specific data are available.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental evidence for chemo-mechanical coupling during carbon mineralization in ultramafic rocks

It is known that storing carbon dioxide in the subsurface as carbonate minerals has the benefit of long-term stability and immobility. Ultramafic rock formations have been suggested as a potential reservoir for this type of storage due to the availability of cations to react with dissolved carbon dioxide and the fast reaction rates associated with minerals common in ultramafic formations; however, the rapid reactions have the potential to couple with the mechanical and hydraulic behavior of the rocks and little is known about the extent and mechanisms of this coupling. In this study, we argue that the dissolution of primary minerals and the precipitation of secondary minerals along pre-existing fractures in samples lead to reductions in both the apparent Young's modulus and shear strength of aggregates, accompanied by reduction in permeability. Hydrostatic and triaxial deformation experiments were run on dunite samples saturated with de-ionized water and carbon dioxide-rich solutions while stress, strain, permeability and pore fluid chemistry were monitored. Sample microstructures were examined after reaction and deformation using scanning electron microscopy (SEM). The results show that channelized dissolution and carbonate mineral precipitation in the samples saturated with carbon dioxide-rich solutions modify the structure of grain boundaries, leading to the observed reductions in stiffness, strength and permeability. A geochemical model was run to help interpret fluid chemical data, and we find that the apparent reaction rates in our experiments are faster than rates calculated from powder reactors, suggesting mechanically enhanced reaction rates. In conclusion, we find that chemo-mechanical coupling during carbon mineralization in dunites leads to substantial modification of mechanical and hydraulic behavior that needs to be accounted for in future modeling efforts of in situ carbon mineralization projects.

58 GEOSCIENCES↗

Near-infrared spectroscopic investigation of water in supercritical CO2 and the effect of CaCl2

Near-infrared (NIR) spectroscopy was applied to investigate the dissolution and chemical interaction of water dissolved into supercritical carbon dioxide (scCO2) and the influence of CaCl2 in the co-existing aqueous phase at fo empe e : 40 50 75 nd 100 C at 90 atm. Consistent with the trend of the vapor pressure of water, the solubility of pure water in scCO2 inc e ed f om 40 °C (0.32 mole%) o 100 °C (1.61 mole%). The presence of CaCl2 negatively affects the solubility of water in scCO2: at a given temperature and pressure the solubility of water decreased as the concentration of CaCl2 in the aqueous phase increased, following the trend of the activity of water. A 40 °C, the water concentration in scCO2 in contact with saturated CaCl2 aqueous solution was only 0.16 mole%, a drop of more than 50% as compared to pure water while that a 100 °C was 1.12 mole%, a drop of over 30% as compared to pure water, under otherwise the same conditions. Analysis of the spectral profiles suggested that water dissolved into scCO2 exists in the monomeric form under the evaluated temperature and pressure conditions, for both neat water and CaCl2 solutions. However, its rotational degrees of freedom decrease at lower temperatures due to higher fluid densities, leading to formation of weak H2O:CO2 Lewis acid-base complexes. Similarly, the nearly invariant spectral profiles of dissolved water in the presence and absence of saturated CaCl2 under the same experimental conditions was taken as evidence that CaCl2 dissolution in scCO2 was limited as the dissolved Ca2+/CaCl2 would likely be highly hydrated and would alter the overall spectra of waters in the scCO2 phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Application of sequential extraction and hydrothermal treatment for characterization and enrichment of rare earth elements from coal fly ash

Rare earth elements (REE) play a critical role in the global economy. The concern about the REE supply challenge has stimulated global interest in recovering REE from alternative non-conventional REE sources such as coal fly ash. In this paper, sequential extraction, physical separations and hydrothermal alkaline treatment were explored for characterization and enrichment of REE from coal fly ash. Seven-step sequential extraction of coal fly ash has demonstrated that 86.1% of total REE were associated with the glassy phase of the fly ash, with the remaining REE mainly distributed in the organic and sulfides phase (8.3%), the exchangeable phase (3.7%), and the carbonates phase (1.5%). A process combining physical separations, namely, particle size separation and magnetic separation, and hydrothermal alkaline treatment was proposed for enrichment of REE from coal fly ash. The optimal hydrothermal alkaline treatment condition was determined. It was demonstrated that NaOH concentration, solid-to-liquid ratio, temperature, and reaction duration had significant influence on ash dissolution in NaOH solution. Grinding could also enhance ash dissolution during subsequent hydrothermal alkaline treatment. Furthermore REE were enriched from coal fly ash from 325 mg/kg to 877 mg/kg via the proposed process under optimal hydrothermal alkaline treatment conditions.

01 COAL, LIGNITE, AND PEAT↗

Predicting the potential for mineral scale precipitation in unconventional reservoirs due to fluid-rock and fluid mixing geochemical reactions

Mineral precipitation within hydraulically fractured shale may affect fluid flow pathways and impact longterm hydrocarbon production. The ability to predict geochemical reactions that lead to problematic mineral precipitation will lead to active reservoir management strategies to improve overall production. Using the Marcellus Shale as a case study, a combination of laboratory experiments and reaction path modeling was applied to determine which reactions are likely to occur upon introduction of hydraulic fracturing fluid into the shale reservoir. Experimental results indicate that contact between fracturing fluid and shale will result in dissolution of primary minerals (quartz, feldspars, kaolinite, chlorite, pyrite) and secondary mineral precipitation over time periods of less than one week. Precipitation of barite, Fe-oxides, feldspars, amorphous silica and clay is likely to occur within the reservoir during shut in and early flowback due to mixing between fracturing fluid and reservoir brine as based on modeling saturation indices using experimental fluid data. Reaction path modeling of the experimental scenarios corroborates the specific dissolution and precipitation reactions observed experimentally. Comparison of the results to injected and produced waters from a Marcellus Shale well pad in Greene County, PA, USA, shows that the mineral reactions occur during the hydraulic fracturing, shut in, and early flowback periods. The results presented in this paper demonstrate the value in applying experimental approaches to identify mineral precipitation/dissolution reactions that may significantly impact reservoir performance. The good agreement between geochemical models and experimental results provides confidence that numerical models can be applied to screen the potential fluid-mineral and fluid-mixing reactions in unconventional reservoirs that result in undesired mineral scale precipitation.

58 GEOSCIENCES↗

Bioreduction of Fe-bearing clay minerals and their reactivity toward pertechnetate (Tc-99)

99 Technetium ( 99 Tc) is a fission product of uranium-235 and plutonium-239 and poses a high environmental hazard due to its long half-life (t1/2 = 2.13 x 10 5 y), abundance in nuclear wastes, and environmental mobility under oxidizing conditions [i.e., Tc(VII)]. Under reducing conditions, Tc(VII) can be reduced to insoluble Tc(IV). Ferrous iron [Fe(II)], either in aqueous form or in mineral form, has been used to reduce Tc(VII) to Tc(IV). However, the reactivity of Fe(II) from clay minerals, other than nontronite, toward immobilization of Tc(VII) and its role in retention of reduced Tc(IV) have not been investigated. In this study the reactivity of a suite of clay minerals toward Tc(VII) reduction and immobilization was evaluated. The clay minerals chosen for this study included five members in the smectite-illite (S-I) series, (montmorillonite, nontronite, rectorite, mixed layered I-S, and illite), chlorite, and palygorskite. Fe-oxides were removed from these minerals with a modified dithionite-citrate-bicarbonate (DCB) procedure. The total Fe content of these clay minerals, after Fe-oxide removal, ranged from 0.7 to 30.4% by weight, and the Fe(III)/Fe(total) ratio ranged from 44.9 to 98.5%. X-ray diffraction (XRD) and Mossbauer spectroscopy results showed that after Fe oxide removal the clay minerals were free of Fe-oxides. Scanning electron microscopy (SEM) revealed that little dissolution occurred during the DCB treatment. Bioreduction experiments were performed in bicarbonate buffer (pH-7) with Fe(III) in the clay minerals as the sole electron acceptor, lactate as the sole electron donor, and Shewanella Putrifaciens CN32 cells as mediators. In select tubes, anthraquinone-2,6-disulfate (AQDS) was added as electron shuttle to facilitate electron transfer. The extent of Fe(III) bioreduction was the highest for chlorite (~43 wt%) and the lowest for palygorskite (~4.17 wt%). In the S-I series, NAu-2 was the most reducible (~31 %) and illite the least (~0.4 %). The extent and initial rate of bioreduction were positively correlated with the percent smectite in the S-I series (i.e., layer expandability). Fe(II) in the bioreduced clay minerals subsequently was used to reduce Tc(VII) to Tc(IV) in PIPES buffer. Similar to the trend of bioreduction, in the S-I series, reduced smectite showed the highest reactivity toward Tc(VII), and reduced illite exhibited the least. The initial rate of Tc(VII) reduction, after normalization to clay and Fe(II) concentrations, was positively correlated with the percent smectite in the S-I series. Fe(II) in chlorite and palygorskite was also reactive toward Tc(VII) reduction. These data demonstrate that crystal chemical parameters (layer expandability, Fe and Fe(II) contents, and surface area etc.) play important roles in controlling the extent and rate of bioreduction and the reactivity toward Tc(VII) reduction. Reduced Tc(IV) resides within clay mineral matrix, and this association could minimize any potential of reoxidation over long term.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Evaluation of accessible mineral surface areas for improved prediction of mineral reaction rates in porous media

The rates of mineral dissolution reactions in porous media are difficult to predict, in part because of a lack of understanding of mineral reactive surface area in natural porous media. Common estimates of mineral reactive surface area used in reactive transport models for porous media are typically ad hoc and often based on average grain size, increased to account for surface roughness or decreased by several orders of magnitude to account for reduced surface reactivity of field as opposed to laboratory samples. In this paper, accessible mineral surface areas are determined for a sample from the reservoir formation at the Nagaoka pilot CO 2 injection site (Japan) using a multi-scale image analysis based on synchrotron X-ray microCT, SEM QEMSCAN, XRD, SANS, and FIB-SEM. This analysis not only accounts for accessibility of mineral surfaces to macro-pores, but also accessibility through connected micro-pores in smectite, the most abundant clay mineral in this sample. While the imaging analysis reveals that most of the micro- and macro-pores are well connected, some pore regions are unconnected and thus inaccessible to fluid flow and diffusion. To evaluate whether mineral accessible surface area accurately reflects reactive surface area a flow-through core experiment is performed and modeled at the continuum scale. The core experiment is performed under conditions replicating the pilot site and the evolution of effluent solutes in the aqueous phase is tracked. Various reactive surface area models are evaluated for their ability to capture the observed effluent chemistry, beginning with parameter values determined as a best fit to a disaggregated sediment experiment (Beckingham et al., 2016) described previously. Simulations that assume that all mineral surfaces are accessible (as in the disaggregated sediment experiment) over-predict the observed mineral reaction rates, suggesting that a reduction of RSA by a factor of 10–20 is required to match the core flood experimental data. While the fit of the effluent chemistry (and inferred mineral dissolution rates) greatly improve when the pore-accessible mineral surface areas are used, it was also necessary to include highly reactive glass phases to match the experimental observations, in agreement with conclusions from the disaggregated sediment experiment. Finally, it is hypothesized here that the 10–20 reduction in reactive surface areas based on the limited pore accessibility of reactive phases in core flood experiment may be reasonable for poorly sorted and cemented sediments like those at the Nagaoka site, although this reflects pore rather than larger scale heterogeneity.

58 GEOSCIENCES↗

Large carbon isotope variability during methanogenesis under alkaline conditions

We report that high carbon isotope values (δ 13 C CH4 > -40‰) have widely been used as evidence that methane in alkaline rock-hosted fluids was formed abiotically, particularly in serpentinizing systems. However, isotope fractionation during microbial methanogenesis is relatively understudied at high pH. We isolated a hydrogenotrophic Methanobacterium sp. from hyperalkaline subsurface fluids in the Samail ophiolite to assess how carbon and hydrogen isotope values of CH 4 varied depending upon pH and carbonate mineral source (NaHCO 3 or CaCO 3 ). The hydrogen isotope fractionation α H20/CH4 (1.46–1.66) did not vary across pH. In contrast, the expressed carbon isotope fractionation, α CO2/CH4 , ranged from 1.028 to 1.089. Carbon isotope fractionation increased with pH, reaching a maximum 13 C depletion of -85‰. However, the 13 C depletion significantly diminished at pH ≥ 9 for CaCO 3 -amended experiments, generating δ 13 C CH4 as high as -28‰. To evaluate the large variability in δ 13 C CH4 , we developed a steady-state model to assess how the rates of carbonate dissolution, cellular uptake of CO 2 and irreversible CH 4 production can affect the net isotope fractionation during methanogenesis. Methanobacterium sp. can produce highly depleted δ 13 C CH4 in simulated alkaline serpentinizing fluids when dissolved inorganic carbon levels are high and methanogenesis rates are slow. However, small carbon isotope fractionation occurs when rates of carbonate dissolution are slower than cellular uptake, leading to relatively high δ 13 C CH4 values (>~-35‰) that are traditionally interpreted to be purely “abiotic”. Lastly, microbial CH 4 can be produced in carbon-limited mafic and ultramafic rock-hosted environments on Earth and potentially other planetary bodies, but it may be difficult to isotopically identify biogenic methane when mineral carbonates are the dominant carbon source.

58 GEOSCIENCES↗

The impact of depth-dependent water content on steady state weathering and eroding systems

Models for weathering and regolith formation are normally built on the assumption of constant rates of water advection in the zone of water-saturated pores, and constant water content of those pores, but it is common that weathering occurs in the water-unsaturated zone where lateral flow occurs. Hence, water content in pores varies with depth. Here we model mineral weathering profiles while accounting for depth-dependent water content. Like previous models, a mineral equilibrates with water over a length ξ that depends on dissolution and advection rates, but a new lengthscale λ is introduced to describe the decrease of water content with depth. Steady states of the regolith thickness can be attained for any finite λ and non-zero velocity v E of erosion at the land surface. The type of mineral depletion profile developed over geological timescales depends on coupling between weathering and erosion: for slow erosion, a completely developed profile (CDP) is observed, in which the mineral-depleted zone at the top of the regolith has thickness of order λ ; as v E increases, there is a transition to an incompletely developed profile (IDP), in which partial mineral depletion at the land surface is constrained to a narrow range of velocities; when v E exceeds the advance rate of weathering under far from equilibrium conditions, the profile transitions to an unstable regime that exposes bedrock. In general, the reaction front (RF) thickness and the velocity where CPD transitions to IDP depend on the interplay of both water infiltration and chemical equilibration over the timescale of water residence in regolith. The RF thickness roughly equals a correlation length χ defined as half the harmonic average of ξ and λ . In cases of limited water infiltration, water-mineral equilibration is achieved within the length λ , so that the RF thickness is controlled by hydrological properties and is independent of dissolution and advection rates. In the opposite endmember, water infiltrates to large depths and the effects of physical and chemical parameters on RF thickness are the same as in previous geochemical models. The relaxation time for reaching a steady state is shown to be ~ χ / v E . We discuss the effects of physical and chemical parameters in CDPs and IDPs in those endmembers and show an application to a CDP in granitic regolith.

54 ENVIRONMENTAL SCIENCES↗

Reactivity of Redox Cycled Fe-bearing Subsurface Sediments Towards Hexavalent Chromium Reduction

Structural Fe(II) in clay minerals and natural sediments is known to reduce Cr(VI) to Cr(III), but the effect of redox-cycled Febearing natural sediments on Cr(VI) reduction kinetics is poorly understood. The objective of this study was to understand the kinetics and mechanisms of Cr(VI) reduction by Fe(II) in redox cycled natural sediment. Fe-bearing sediment was collected from the Ringold formation in the 300 area of Hanford, Washington, United States. Fe redox cycling of the sediment was accomplished via four cycles of bioreduction of structural Fe(III) in Hanford sediment and air oxidation of the resulting Fe(II). Bio-produced Fe(II) in Hanford sediment from each redox cycle was utilized to reduce Cr(VI) at three temperatures (10, 20 and 30° C). The initial rate of Cr(VI) reduction generally increased with each redox cycle, which was more pronounced at high temperatures. The amount of Fe(II) oxidized to the amount of Cr(VI) reduced was close to the expected stoichiometric ratio of 3. Aqueous concentrations of Si, Al, and Fe revealed some dissolution of the sediment after reaction with Cr(VI). Xray diffraction (XRD) and scanning electron microscopy (SEM) detected secondary mineral formation. Mössbauer data showed that the oxidation of Fe(II) was coupled with the reduction of Cr(VI) but no Feoxides/ oxyhydroxides formed. Transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), XANES, and EXAFS were performed for representative reduced Cr solids that formed from reduction of Cr(VI) by sediment-associated Fe(II) at 30oC. TEM revealed that the d-spacing of Cr-reacted montmorillonite at 30° C, a dominant Fe-bearing mineral in Hanford sediment, expanded from 10 Å to 13 Å. This layer expansion was likely due to intercalation of reduced Cr(III) into the interlayer space of the montmorillonite structure. EELS exhibited an L2 absorption peak at 586.0 eV and an L3 absorption peak at 577.0 eV, suggestive of Cr(III) in a hydroxide mineral phase. Similarly, XANES and EXAFS analyses confirmed Cr(VI) reduction to Cr(OH)3 at 30° C and indicated an edge-sharing coordination of the Cr(III) octahedra to 2-3 other Cr or metal ions. This study has important implications for understanding the reactivity of clay-rich sediment towards Cr(VI) reduction at contaminated sites and the stability of the reduced Cr(III).

Bishop, Michael E.↗

Mineralogical, magnetic and geochemical data constrain the pathways and extent of weathering of mineralized sedimentary rocks

The oxidative weathering of sulfidic rock can profoundly impact watersheds through the resulting export of acidity and metals. Weathering leaves a record of mineral transformation, particularly involving minor redox-sensitive phases, that can inform the development of conceptual and quantitative models. In sulfidic sedimentary rocks, however, variations in depositional history, diagenesis and mineralization can change or overprint the distributions of these trace minerals, complicating the interpretation of weathering signatures. Here we show that a combination of bulk mineralogical and geochemical techniques, micrometer-resolution X-ray fluorescence microprobe analysis and rock magnetic measurements, applied to drill core samples and single weathered fractures, can provide data that enable the development of a geochemically consistent weathering model. This work focused on one watershed in the Upper Colorado River Basin sitting within the Mesaverde Formation, a sedimentary sandstone bedrock with disseminated sulfide minerals, including pyrite and sphalerite, that were introduced during diagenesis and subsequent magmatic-hydrothermal mineralization. Combined analytical methods revealed the pathways of iron (Fe), carbonate and silicate mineral weathering and showed how pH controls element retention or release from the actively weathering fractured sandstone. Drill core logging, whole rock X-ray diffraction, and geochemical measurements document the progression from unweathered rock at depth to weathered rock at the surface. X-ray microprobe analyses of a 1-cm size weathering profile along a fracture surface are consistent with the mobilization of Fe(II) and Fe(III) into acidic pore water from the dissolution of primary pyrite, Fe-sphalerite, chlorite, and minor siderite and pyrrhotite. These reactions are followed by the precipitation of secondary minerals such as of goethite and jarosite, a Fe-(oxyhydr)oxide and hydrous Fe(III) sulfate, respectively. Microscale analyses also helped explain the weathering reactions responsible for the mineralogical transformations observed in the top and most weathered section of the drill core. For example, dissolution of feldspar and chlorite neutralizes the acidity generated by Fe and sulfide mineral oxidation, oversaturating the solution in both Fe-oxides. The combination of X-ray spectromicroscopy and magnetic measurements show that the Fe(III) product is goethite, mainly present either as a coating on fracture surfaces in the actively weathering region of the core or more homogeneously contained within the unconsolidated regolith at the top of the core. Low-temperature magnetic data reveal the presence of ferromagnetic Fe-sulfide pyrrhotite that, although it occurs at trace concentrations, could provide a qualitative proxy for unweathered sulfide minerals because the loss of pyrrhotite is associated with the onset of oxidative weathering. Pyrrhotite loss and goethite formation are detectable through room-temperature magnetic coercivity changes, suggesting that rock magnetic measurements can determine weathering intensity in rock samples at many scales. In conclusion, this work contributes evidence that the weathering of sulfidic sedimentary rocks follows a geochemical pattern in which the abundance of sulfide minerals controls the generation of acidity and dissolved elements, and the pH-dependent mobility of these elements controls their export to the ground- and surface-water.

58 GEOSCIENCES↗

The solubility and speciation of REE phosphate endmembers (CePO 4 and YPO 4 ) in Cl-rich aqueous fluids from 350 to 450 °C and implications for natural systems

The rare earth elements (REE) are important metals used increasingly in advanced technologies. Within the crust, the elements Ce and Y are commonly more abundant compared to other lanthanides and comprise important end-member constituents of REE-bearing minerals. Specifically, Ce is part of the light (L) REE which have larger ionic radii than the heavy (H) REE, which are grouped together with Y. These differences in ionic radius can lead to important physico-chemical trends within the lanthanide group. Despite a recent increase in experimental and thermodynamic data for the REE at high temperature and pressure, there is still a significant lack of these data at supercritical conditions. In this study we conducted batch-type experiments to measure the solubility of REE phosphates (CePO 4 and YPO 4 ) at varying starting pH (1.5–10), and salinity (0.01–1.4 mol/kg NaCl) at 350 and P sat , and from 400 to 450 °C at 700 bar. Results show that the solubility of Ce (33–0.14 ppb) is generally higher than Y (13–0.13 ppb) and that Ce complexes more strongly with both chloride and hydroxyl ligands compared to Y. The solubilities of both REE phosphates are highly pH-dependent and, to a lesser extent, depend on salinity at the studied conditions. The solubility data from this study were implemented into the GEMSFITS program to optimize the thermodynamic properties of Ce and Y hydroxyl and chloride species. The updated standard partial molal Gibbs energies of formation (Δ f G 0 T,P ) are used within the experimental temperature and pressure range to accurately predict the CePO 4 and YPO 4 solubility and Ce and Y speciation behavior. Based on the updated thermodynamic properties we also provide formation constants (log β n Cl,OH ) for Ce and Y hydroxyl and chloride species. Updated thermodynamic properties are applied to model REE-apatite dissolution and REE mobility based on the Pea Ridge iron oxide apatite deposit in Missouri, USA. The apatite dissolution model replicates natural observations including the replacement of monazite and xenotime after apatite and is an example of the utility of the new thermodynamic constants applied to supercritical crustal fluids. Furthermore, the findings of this study advance the predictive capabilities of geochemical models, our understanding of the behavior of individual REE, and permit modeling the overarching fractionation trends between LREE and HREE in supercritical crustal fluids.

58 GEOSCIENCES↗