Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Rate processes and decay of metastable states inside an anharmonic well driven by a random zero-point field

A procedure previously developed by us for the evaluation of the diffusion coefficient and drift velocity of a charged Newtonian particle in a zero-point field is applied here to a sextic potential-one-dimensional system, for which an exact solution to the related Hamilton-Jacobi-Yasue-Riccati equation is available. This potential energy function represents either a stiff single well or a triple well. For this model, the averaged diffusion coefficient has been evaluated by assuming that the particle under study is confined for a long time inside one anharmonic well, that is, in the limit of infinite relaxation time, and the results are compared with quantum-mechanical predictions. A double-well model potential is subsequently examined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient data-driven regression for reduced-order modeling of spatial pattern formation

We present an efficient data-driven regression approach for constructing reduced-order models (ROMs) of reaction-diffusion systems exhibiting pattern formation. The ROMs are learned non-intrusively from available training data of physically accurate numerical simulations. The method can be applied to general nonlinear systems through the use of polynomial model form, while not requiring knowledge of the underlying physical model, governing equations, or numerical solvers. The process of learning ROMs is posed as a low-cost least-squares problem in a reduced-order subspace identified via Proper Orthogonal Decomposition (POD). Numerical experiments on classical pattern-forming systems–including the Schnakenberg and Mimura–Tsujikawa models–demonstrate that higher-order surrogate models significantly improve prediction accuracy while maintaining low computational cost. The proposed method provides a flexible, non-intrusive model reduction framework, well suited for the analysis of complex spatio-temporal pattern formation phenomena.

Data-driven modeling↗

A Method for Including Diffusive Effects in Texture Evolution

This work describes a model for representing grain misorientation in continuum models for texture evolution. The model relies on a connection, derived here, between the fluctuation of the reorientation velocity in discrete models of texture evolution and an isotropic diffusion operator that can be used to represent misorientation effects in continuum models for texture evolution. Previous work has developed a method for computing the fluctuation of the reorientation velocity in discrete models. These values, along with the average reorientation velocity, are used to set up inhomogeneous continuum advection and diffusion operators. Here, the complete homogenized continuum model uses the discrete harmonics to represent and evolve the orientation distribution function, now including a diffusion operator representing the effects of intragranular misorientation. Results from the new model are compared to fully-resolved crystal plasticity finite element simulations and experimental data to demonstrate the accuracy of the proposed diffusion operator and the overall method for simulating texture evolution.

(B) crystal plasticity↗

Effective Diffusion-Medium Thickness for Simplified Polymer-Electrolyte-Fuel-Cell Modeling

In this manuscript, conformal mapping is applied to a rib/channel domain of a polymer-electrolyte-fuel-cell diffusion medium. The analysis leads to the calculation of an effective diffusion-medium thickness, which can subsequently be used in 1-D simulations to account for the average rib/channel 2-D geometric effect. Extensions of the analysis to anisotropic and multilayer diffusion media are also given. Both equations and figures show the impact on a given variable at the catalyst layer of having a combined conducting/nonconducting boundary across from it.

42 ENGINEERING↗

Finite-volume scheme for anisotropic diffusion

In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High energy neutrinos from dissipative photospheric models of gamma ray bursts

We calculate the high energy neutrino spectrum from gamma-ray bursts where the emission arises in a dissipative jet photosphere determined by either baryonically or magnetically dominated dynamics, and compare these neutrino spectra to those obtained in conventional internal shock models. We also calculate the diffuse neutrino spectra based on these models, which appear compatible with the current IceCube 40+59 constraints. While a re-analysis based on the models discussed here and the data from the full array would be needed, it appears that only those models with the most extreme parameters are close to being constrained at present. A multi-year operation of the full IceCube and perhaps a next generation of large volume neutrino detectors may be required in order to distinguish between the various models discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of Nonlinearity in Hybrid Kinetic Monte Carlo-Continuum Models

Recently there has been interest in developing efficient ways to model heterogeneous surface reactions with hybrid computational models that couple a KMC model for a surface to a finite difference model for bulk diffusion in a continuous domain. We consider two representative problems that validate a hybrid method and also show that this method captures the combined effects of nonlinearity and stochasticity. We first validate a simple deposition/dissolution model with a linear rate showing that the KMC-continuum hybrid agrees with both a fully deterministic model and its analytical solution. We then study a deposition/dissolution model including competitive adsorption, which leads to a nonlinear rate, and show that, in this case, the KMC-continuum hybrid and fully deterministic simulations do not agree. However, we are able to identify the difference as a natural result of the stochasticity coming from the KMC surface process. Because KMC captures inherent fluctuations, we consider it to be more realistic than a purely deterministic model. Therefore, we consider the KMC-continuum hybrid to be more representative of a real system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Simple and Efficient Diffuse Interface Method for Compressible Two-Phase Flows

In nuclear reactor safety and optimization there are key issues that rely on in-depth understanding of basic two-phase flow phenomena with heat and mass transfer. For many reasons, to be discussed, there is growing interest in the application of two-phase flow models to provide diffuse, but nevertheless resolved, simulation of interfaces between two immiscible compressible fluids – diffuse interface method (DIM). Because of its ability to dynamically create interfaces and to solve interfaces separating pure media and mixtures for DNS-like (Direct Numerical Simulation) simulations of interfacial flows, we examine the construction of a simple, robust, fast, and accurate numerical formulation for the 5-equation Kapila et al. [1] reduced two-phase model. Though apparently simple, the Kapila et al. model contains a volume fraction differential transport equation containing a nonlinear, non-conservative term which poses serious computational challenges. To circumvent the difficulties encountered with the single velocity and single pressure Kapila et al. [1] multiphase flow model, a 6-equation relaxation hyperbolic model is built to solve interface problems with compressible fluids. In this approach, pressure non-equilibrium is first restored, followed by a relaxation to an asymptotic solution which is convergent to the solutions of the Kapila et al. reduced model. The apparent complexity introduced with this extended hyperbolic model actually leads to considerable simplifications regarding numerical resolution, and the various ingredients used by this method are general enough to consider future extensions to problems involving complex physics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Dynamics of coupled lithium/electron diffusion in TiO2 polymorphs

Molecular dynamics simulations were performed with a potential shell model to investigate the diffusion of lithium ions and electron polarons in rutile and anatase. Simulations of an isolated lithium ion in rutile predict fast diffusion in the c channels with an activation energy of 0.05 eV, which corresponds to a jump rate of 4×1011 s-1 and a diffusion coefficient of 9×10-5 cm2·s-1 at room temperature. In anatase, the activation energies for intra- and inter-octahedron lithium hopping are 0.02 and 0.39 eV, respectively, and the lithium diffusion coefficient is four to five orders of magnitude slower than in rutile. When in the presence of an electron polaron, lithium hopping is predicted to be affected up to four hops away. The effects are more pronounced in rutile; whereby the first energy minimum along the c direction is absent due to the strong lithium-electron electrostatic interactions along the open c channels. Combining the lithium hopping and electron transfer rates, a coupled diffusion mechanism emerges whereby the electron polarons diffuse rapidly back and forth around the lithium ions. This process can lead to the occurrence of an instantaneous driving force for lithium hopping. The lithium ion-electron polaron binding energies are found to be large, with a stronger binding in rutile than in anatase: 0.45 and 0.28 eV, respectively, suggesting that, at low lithium mole fractions, lithium ions and electron polarons will form strongly correlated pairs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Volatilization Behavior of Supported Au Nanoparticle Arrays under H 2 at High Temperature

In this work, the fabrication and experimental study of model Au nanoparticle arrays (nanodots) was used to allow a direct comparison of reactive evaporation at elevated temperatures and nonambient H 2 -containing gas atmospheres with theoretical models. Strong temperature and H 2 -concentration dependencies were confirmed as expected, and the observed dependence in particle diameter with time was effectively described using a reactive evaporation and gas phase diffusion based quantitative model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of methane emissions from Palermo municipal landfill: Comparison between field measurements and models

Methane (CH{sub 4}) diffuse emissions from Municipal Solid Waste (MSW) landfills represent one of the most important anthropogenic sources of greenhouse gas. CH{sub 4} is produced by anaerobic biodegradation of organic matter in landfilled MSW and constitutes a major component of landfill gas (LFG). Gas recovery is a suitable method to effectively control CH{sub 4} emissions from landfill sites and the quantification of CH{sub 4} emissions represents a good tool to evaluate the effectiveness of a gas recovery system in reducing LFG emissions. In particular, LFG emissions can indirectly be evaluated from mass balance equations between LFG production, recovery and oxidation in the landfill, as well as by a direct approach based on LFG emission measurements from the landfill surface. However, up to now few direct measurements of landfill CH{sub 4} diffuse emissions have been reported in the technical literature. In the present study, both modeling and direct emission measuring methodologies have been applied to the case study of Bellolampo landfill located in Palermo, Italy. The main aim of the present study was to evaluate CH{sub 4} diffuse emissions, based on direct measurements carried out with the flux accumulation chamber (static, non-stationary) method, as well as to obtain the CH{sub 4} contoured flux map of the landfill. Such emissions were compared with the estimate achieved by means of CH{sub 4} mass balance equations. The results showed that the emissions obtained by applying the flux chamber method are in good agreement with the ones derived by the application of the mass balance equation, and that the evaluated contoured flux maps represent a reliable tool to locate areas with abnormal emissions in order to optimize the gas recovery system efficiency.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

QUASI-STATIC MODEL OF MAGNETICALLY COLLIMATED JETS AND RADIO LOBES. II. JET STRUCTURE AND STABILITY

This is the second in a series of companion papers showing that when an efficient dynamo can be maintained by accretion disks around supermassive black holes in active galactic nuclei, it can lead to the formation of a powerful, magnetically driven, and mediated helix that could explain both the observed radio jet/lobe structures and ultimately the enormous power inferred from the observed ultrahigh-energy cosmic rays. In the first paper, we showed self-consistently that minimizing viscous dissipation in the disk naturally leads to jets of maximum power with boundary conditions known to yield jets as a low-density, magnetically collimated tower, consistent with observational constraints of wire-like currents at distances far from the black hole. In this paper we show that these magnetic towers remain collimated as they grow in length at nonrelativistic velocities. Differences with relativistic jet models are explained by three-dimensional magnetic structures derived from a detailed examination of stability properties of the tower model, including a broad diffuse pinch with current profiles predicted by a detailed jet solution outside the collimated central column treated as an electric circuit. We justify our model in part by the derived jet dimensions in reasonable agreement with observations. Using these jet properties, we also discuss the implications for relativistic particle acceleration in nonrelativistically moving jets. The appendices justify the low jet densities yielding our results and speculate how to reconcile our nonrelativistic treatment with general relativistic MHD simulations.

79 ASTRONOMY AND ASTROPHYSICS↗

CONDUCTION IN LOW MACH NUMBER FLOWS. I. LINEAR AND WEAKLY NONLINEAR REGIMES

Thermal conduction is an important energy transfer and damping mechanism in astrophysical flows. Fourier's law, in which the heat flux is proportional to the negative temperature gradient, leading to temperature diffusion, is a well-known empirical model of thermal conduction. However, entropy diffusion has emerged as an alternative thermal conduction model, despite not ensuring the monotonicity of entropy. This paper investigates the differences between temperature and entropy diffusion for both linear internal gravity waves and weakly nonlinear convection. In addition to simulating the two thermal conduction models with the fully compressible Navier-Stokes equations, we also study their effects in the reduced ''soundproof'' anelastic and pseudoincompressible (PI) equations. We find that in the linear and weakly nonlinear regime, temperature and entropy diffusion give quantitatively similar results, although there are some larger errors in the PI equations with temperature diffusion due to inaccuracies in the equation of state. Extrapolating our weakly nonlinear results, we speculate that differences between temperature and entropy diffusion might become more important for strongly turbulent convection.

79 ASTRONOMY AND ASTROPHYSICS↗

UEDGE modelling of detached divertor operation for long-leg divertor geometries in ARC

In this work, simulations of the ARC scrape-off layer and divertor configuration are carried out using UEDGE to perform the first power-handling assessment for the divertor design. A convective–diffusive anomalous transport model is implemented in the code to reproduce the radial plasma profiles anticipated for the device at the outer mid-plane. Levels of exhaust power from the core are varied, and a 0.5% fixed fraction neon impurity seeding is included in investigations to find steady-state detached solutions. Initial studies employing a super-X divertor configuration have shown that a stable detached divertor-operational window exists for reactor exhaust powers in the range of 72–92 MW, which is close to projected levels of exhaust power of 105 MW across the separatrix anticipated for ARC. Under these conditions, the divertor heat flux is fully dissipated by radiation and radial losses to the sidewalls of the divertor channel, leading to acceptable levels of power flux density on plasma-facing components. Simulations are being extended to study the performance of the X-point target geometry and to explore the sensitivity to the physics model and input parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Single molecule characterization of anomalous transport in a thin, anisotropic film

Here, the diffusion of small, charged molecules incorporated in an anisotropic polyelectrolyte multilayers (PEMs) was tracked in three dimensions by combining single-molecule fluorescence localization (to characterize lateral diffusion) with Förster resonance energy transfer (FRET) between diffusing molecules and the supporting surface (to measure diffusion in the surface-normal direction). Analysis of the surface-normal diffusion required model-based statistical analysis to account for the inherently noisy FRET signal. Combining these distinct single-molecule methods, which are inherently sensitive to different length scales, permitted simultaneous characterization of severely anisotropic diffusion, which was more than three orders of magnitude slower in the surface-normal direction. We hypothesize that the anomalously slow surface-normal diffusion was related to the periodic distribution of charge in the PEM, which created electrostatic barriers. The motion was strongly subdiffusive, with anomalous temporal scaling exponents in lateral and normal directions, suggesting a connection to the transient, random fractal conformation of polymer chains in the film’s matrix.

36 MATERIALS SCIENCE↗

EFFICIENT COSMIC RAY ACCELERATION, HYDRODYNAMICS, AND SELF-CONSISTENT THERMAL X-RAY EMISSION APPLIED TO SUPERNOVA REMNANT RX J1713.7-3946

We model the broadband emission from supernova remnant (SNR) RX J1713.7-3946 including, for the first time, a consistent calculation of thermal X-ray emission together with non-thermal emission in a nonlinear diffusive shock acceleration model. Our model tracks the evolution of the SNR including the plasma ionization state between the forward shock and the contact discontinuity. We use a plasma emissivity code to predict the thermal X-ray emission spectrum assuming the initially cold electrons are heated either by Coulomb collisions with the shock-heated protons (the slowest possible heating), or come into instant equilibration with the protons. For either electron heating model, electrons reach {approx}>10{sup 7} K rapidly and the X-ray line emission near 1 keV is more than 10 times as luminous as the underlying thermal bremsstrahlung continuum. Since recent Suzaku observations show no detectable line emission, this places strong constraints on the unshocked ambient medium density and on the relativistic electron-to-proton ratio. For the uniform circumstellar medium (CSM) models that we consider, the low densities and high relativistic electron-to-proton ratios required to match the Suzaku X-ray observations definitively rule out pion decay as the emission process producing GeV-TeV photons. We show that leptonic models, where inverse-Compton scattering against the cosmic background radiation dominates the GeV-TeV emission, produce better fits to the broadband thermal and non-thermal observations in a uniform CSM.

79 ASTRONOMY AND ASTROPHYSICS↗

Diffusion-driven precipitate growth and ripening of oxygen precipitates in boron doped silicon by dynamical x-ray diffraction

X-ray Pendellösung fringes from three silicon single crystals measured at 900 °C are analyzed with respect to density and size of oxygen precipitates within a diffusion-driven growth model and compared with TEM investigations. It appears that boron doped (p+) material shows a higher precipitate density and a higher strain than moderately (p-) boron crystals. In-situ diffraction reveals a diffusion-driven precipitate growth followed by a second growth regime in both materials. An interpretation of the second growth regime in terms of Ostwald ripening yields surface energy values (around 70 erg/cm{sup 2}) similar to published data. Further, an increased nucleation rate by a factor of ∼13 is found in the p+ sample as compared to a p- sample at a nucleation temperature of 450 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Conditions for translation and scaling invariance of the neutron diffusion equation

Lie group methods are applied to the time-dependent, monoenergetic neutron diffusion equation in materials with spatial and time dependence. To accomplish this objective, the underlying 2nd order partial differential equation (PDE) is recast as an exterior differential system so as to leverage the isovector symmetry analysis approach. Some of the advantages of this method as compared to traditional symmetry analysis approaches are revealed through its use in the context of a 2nd order PDE. In this context, various material properties appearing in the mathematical model (e.g., a diffusion coefficient and macroscopic cross section data) are left as arbitrary functions of space and time. The symmetry analysis that follows is restricted to a search for translation and scaling symmetries; consequently the Lie derivative yields specific material conditions that must be satisfied in order to maintain the presence of these important similarity transformations. The principal outcome of this work is thus the determination of analytic material property functions that enable the presence of various translation and scaling symmetries within the time-dependent, monoenergetic neutron diffusion equation. The results of this exercise encapsulate and generalize many existing results already appearing in the literature. While the results contained in this work are primarily useful as phenomenological guides pertaining to the symmetry behavior of the neutron diffusion equation under certain assumptions, they may eventually be useful in the construction of exact solutions to the underlying mathematical model. Furthermore, the results of this work are also useful as a starting point or framework for future symmetry analysis studies pertaining to the neutron transport equation and its many surrogates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗