Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differentiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Morphological and Chemical Differentiation between Tunisian Populations of Pinus halepensis , Pinus brutia , and Pinus pinaster

Abstract The lipid fraction of seeds from different pine species and populations was studied regarding total lipid content, fatty acid profile and vitamin E composition. The investigated seeds contained a high percentage of lipid (13.6 to 31.5 %). Lipid fractions were found to be rich in vitamin E, which varied significantly among species and populations. P. halepensis (Ph−Hn) showed the highest content of vitamin E (256.3 mg/kg of seeds) and the uppermost content of α ‐tocopherol (44 mg/kg). However, P. halepensis (Ph−Kas) was the richest in γ ‐tocopherol (204.9 mg/kg). Lipid fractions had a low content of δ ‐tocopherol (1.2 to 3.6 mg/kg. The highest content of γ ‐tocotrienol (∼18 %) was determined for P. halepensis (Ph−Dc and Ph−Hn). Thirteen fatty acids were identified by GC‐FID with significant variation between the investigated species. The linoleic acid was the major fatty acid followed by oleic acid and palmitic acid. The chemical differentiation among species for the composition of fatty acids and vitamin E was confirmed by PCA. Significant correlations were observed between the content of vitamin E and fatty acids and ecological parameters of P. halepensis populations.

Khouja, Mariem↗

Algebraic multigrid preconditioning of the Hessian in optimization constrained by a partial differential equation

Summary We construct an algebraic multigrid (AMG) based preconditioner for the reduced Hessian of a linear‐quadratic optimization problem constrained by an elliptic partial differential equation. While the preconditioner generalizes a geometric multigrid preconditioner introduced in earlier works, its construction relies entirely on a standard AMG infrastructure built for solving the forward elliptic equation, thus allowing for it to be implemented using a variety of AMG methods and standard packages. Our analysis establishes a clear connection between the quality of the preconditioner and the AMG method used. The proposed strategy has a broad and robust applicability to problems with unstructured grids, complex geometry, and varying coefficients. The method is implemented using the Hypre package and several numerical examples are presented.

Barker, Andrew T.↗

A non‐intrusive domain‐decomposition model reduction method for linear steady‐state partial differential equations with random coefficients

Abstract Domain decomposition methods have been proved to be an effective strategy to reduce the dimension of parametric partial differential equations (PDEs). However, existing domain decomposition methods for parametric PDEs are usually intrusive, which means domain decomposition based solvers need to be implemented from scratch for each target parametric PDE. To address this issue, we develop a new non‐intrusive domain‐decomposition model reduction method for linear steady‐state PDEs with random‐field coefficients. As a variant of our previous work by Mu and Zhang, the new method only needs access to the final linear system, that is, the global stiffness matrix and the right hand side, of a deterministic PDE solver, in order to build a domain‐decomposition‐based reduced model without intrusive implementation from scratch. The key idea is to remove the interface condition between sub‐domains and rely on the correlation between columns of the linear system to couple the sub‐domains. The non‐intrusive feature enables the applicability of the proposed method to a broader class of uncertainty quantification problems, where many legacy codes/solvers can be fully reused by our method. Two numerical examples including diffusion equations with random diffusivity and convection‐dominated transport with random velocity, are provided to demonstrate the effectiveness and efficiency of our method.

Zhang, Guannan↗

Bounding the solutions of parametric weakly coupled second-order semilinear parabolic partial differential equations

Here in this paper, two novel techniques for bounding the solutions of parametric weakly coupled second-order semilinear parabolic partial differential equations are developed. The first provides a theorem to construct interval bounds, while the second provides a theorem to construct lower bounds convex and upper bounds concave in the parameter. The convex/concave bounds can be significantly tighter than the interval bounds because of the wrapping effect suffered by interval analysis in dynamical systems. Both types of bounds are computationally cheap to construct, requiring solving auxiliary systems twice and four times larger than the original system, respectively. An illustrative numerical example of bound construction and use for deterministic global optimization within a simple serial branch-and-bound algorithm, implemented numerically using interval arithmetic and a generalization of McCormick's relaxation technique, is presented. Finally, problems within the important class of reaction-diffusion systems may be optimized with these tools.

42 ENGINEERING↗

Challenge and Solution of Characterizing Glass Transition Temperature for Conjugated Polymers by Differential Scanning Calorimetry

Thermomechanical properties of polymers greatly depend on their glass transition temperature ( T g ). Differential scanning calorimetry (DSC) is commonly used to measure T g of polymers. Yet, many conjugated polymers (CPs), especially donor–acceptor CPs (D–A CPs), do not show a clear glass transition when measured by conventional DSC using simple heat and cool scan. In this work, we discuss the origin of the difficulty for measuring T g in such type of polymers. The changes in specific heat capacity (Δ c p ) at T g were accurately probed for a series of CPs by DSC. The results showed a significant decrease in Δ c p from flexible polymer (0.28 Jg -1 K -1 for polystyrene) to rigid CPs (10 -3 Jg -1 K -1 for a naphthalene diimide-based D–A CP). When a conjugation breaker unit (flexible unit) is added to the D–A CPs, we observed restoration of the Δ c p at T g by a factor of 10, confirming that backbone rigidity reduces the Δ c p . Additionally, an increase in the crystalline fraction of the CPs further reduces Δ c p . We conclude that the difficulties of determining T g for CPs using DSC are mainly due to rigid backbone and semicrystalline nature. We also demonstrate that physical aging can be used on DSC to help locate and confirm the glass transition for D-A CPs with weak transition signals.

36 MATERIALS SCIENCE↗

Massively parallel solvers for elliptic partial differential equations in numerical weather and climate prediction

The demand for substantial increases in the spatial resolution of global weather and climate prediction models makes it essential to use numerically efficient and highly scalable algorithms to solve the equations of large-scale atmospheric fluid dynamics. For stability and efficiency reasons, several of the operational forecasting centres, in particular the Met Office and the European Centre for Medium-Range Weather Forecasts (ECMWF) in the UK, use semi-implicit semi-Lagrangian time-stepping in the dynamical core of the model. The additional burden with this method is that a three-dimensional elliptic partial differential equation (PDE) for the pressure correction has to be solved at every model time step and this often constitutes a significant proportion of the time spent in the dynamical core. In global models, this PDE must be solved in a thin spherical shell. To run within tight operational time-scales, the solver has to be parallelized and there seems to be a (perceived) misconception that elliptic solvers do not scale to large processor counts and hence implicit time-stepping cannot be used in very high-resolution global models. After reviewing several methods for solving the elliptic PDE for the pressure correction and their application in atmospheric models, we demonstrate the performance and very good scalability of Krylov subspace solvers and multigrid algorithms for a representative model equation with more than 1010 unknowns on 65 536 cores on the High-End Computing Terascale Resource (HECToR), the UK's national supercomputer. Here, we tested and optimized solvers from two existing numerical libraries (the Distributed and Unified Numerics Environment (DUNE) and Parallel High Performance Preconditioners (hypre)) and implemented both a conjugate gradient solver and a geometric multigrid algorithm based on a tensor-product approach, which exploits the strong vertical anisotropy of the discretized equation. We study both weak and strong scalability and compare the absolute solution times for all methods; in contrast to one-level methods, the multigrid solver is robust with respect to parameter variations.

58 GEOSCIENCES↗

A high-order WENO-limited finite-volume algorithm for atmospheric flow using the ADER-differential transform time discretization

A high-order-accurate weighted essentially non-oscillatory (WENO) limited upwind finite-volume scheme is detailed for the compressible, nonhydrostatic, inviscid Euler equations using an arbitrary derivatives (ADER) time-stepping scheme based on differential transforms (DTs). A second-order-accurate alternating Strang dimensional splitting is compared against multidimensional simulation with 2D transport using solid body rotation of various data. The two were found to give nearly identical accuracy in orthogonal, Cartesian coordinates. Orders of convergence are demonstrated at up to ninth-order accuracy with 2D transport. 1D transport is used to confirm that error decreases monotonically with increasing order of accuracy with WENO limiting even for discontinuous data. Further, WENO limiting always decreased the error compared with simulation without limiting in the L 1 norm. A series of standard 2D compressible nonhydrostatic Euler equation test cases were validated against previous results from literature. Finally, it was demonstrated that increasing the order of accuracy led to better resolved features and increased power for kinetic energy at small wavelengths.

54 ENVIRONMENTAL SCIENCES↗

One-Pot Hydrothermal Synthesis of Elements (B, N, P)-Doped Fluorescent Carbon Dots for Cell Labelling, Differentiation and Outgrowth of Neuronal Cells

The use of the chemically modified one-step facile hydrothermal process to develop Boron (B), Nitrogen (N), and Phosphorous (P) doped carbon dots (E@CDs) is reported on in this work. The chemical characterization of the E@CDs was systematically studied by several analytical techniques that confer doping of elements by known characteristics. The obtained E@CDs had observed very homogeneous size distribution and displayed excitation dependent fluorescence properties, and high quantum yield (QY) was measured in case of B and N doping. Excellent cell viability and good cellular uptake was observed for all E@CDs. Lastly, E@CDs were compared with pristine CDs on their effect on cell labelling, neural differentiation process and outgrowth of neurite network. By manipulating the doping of CDs, we can control the branching pattern and outgrowth of neuronal developments. The E@CDs are capable due to their photostability biocompatibility, and possible selective affinity towards nanomedicine applications.

36 MATERIALS SCIENCE↗

Differential Property Prediction: A Machine Learning Approach to Experimental Design in Advanced Manufacturing

Advanced manufacturing techniques have enabled the production of materials with state-of-the-art properties. In many cases however, the development of physics-based models of these techniques lags behind their development in the lab. This means that material and process development proceeds largely via trial and error. This is sub-optimal since experiments are cost-, time-, and labor-intensive. In this work we propose a machine learning framework, differential property classification (DPC), which enables an experimenter to leverage machine learning's unparalleled pattern matching capability to pursue data-driven experimental design. DPC takes two possible experiment parameter sets and outputs a prediction of which will produce a material with a more desirable property specified by the operator. We demonstrate the success of DPC on AA7075 tube manufacturing process and mechanical property data using shear assisted processing and extrusion (ShAPE), an emerging solid phase processing technology. We show that by focusing on the experimenter's need to choose between multiple candidate experimental parameters, we can reframe the challenging regression task of predicting material properties from processing parameters, into a classification task on which machine learning models can achieve good performance.

advanced manufacturing, machine learning, ShAPE↗

Measurement of differential $ b\overline{b} $- and $ c\overline{c} $-dijet cross-sections in the forward region of pp collisions at $ \sqrt{s} $ = 13 TeV

The inclusive \( b\overline{b} \) - and \( c\overline{c} \) -dijet production cross-sections in the forward region of pp collisions are measured using a data sample collected with the LHCb detector at a centre-of-mass energy of 13 TeV in 2016. The data sample corresponds to an integrated luminosity of 1.6 fb - 1 . Differential cross-sections are measured as a function of the transverse momentum and of the pseudorapidity of the leading jet, of the rapidity difference between the jets, and of the dijet invariant mass. A fiducial region for the measurement is defined by requiring that the two jets originating from the two b or c quarks are emitted with transverse momentum greater than 20 GeV/ c , pseudorapidity in the range 2 . 2 < η < 4 . 2, and with a difference in the azimuthal angle between the two jets greater than 1.5. The integrated \( b\overline{b} \) -dijet cross-section is measured to be 53 . 0 ± 9 . 7 nb, and the total \( c\overline{c} \) -dijet cross-section is measured to be 73 ± 16 nb. The ratio between \( c\overline{c} \) - and \( b\overline{b} \) -dijet cross-sections is also measured and found to be 1 . 37 ± 0 . 27. The results are in agreement with theoretical predictions at next-to-leading order.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement and QCD analysis of double-differential inclusive jet cross sections in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of the inclusive jet production in proton-proton collisions at the LHC at $ \sqrt{s} $ = 13 TeV is presented. The double-differential cross sections are measured as a function of the jet transverse momentum p$_{T}$ and the absolute jet rapidity |y|. The anti-k$_{T}$ clustering algorithm is used with distance parameter of 0.4 (0.7) in a phase space region with jet p$_{T}$ from 97 GeV up to 3.1 TeV and |y| < 2.0. Data collected with the CMS detector are used, corresponding to an integrated luminosity of 36.3 fb$^{-1}$ (33.5 fb$^{-1}$). The measurement is used in a comprehensive QCD analysis at next-to-next-to-leading order, which results in significant improvement in the accuracy of the parton distributions in the proton. Simultaneously, the value of the strong coupling constant at the Z boson mass is extracted as α$_{S}$(m$_{Z}$) = 0.1170±0.0019. For the first time, these data are used in a standard model effective field theory analysis at next-to-leading order, where parton distributions and the QCD parameters are extracted simultaneously with imposed constraints on the Wilson coefficient c$_{1}$ of 4-quark contact interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of $\textrm{t}\overline{\textrm{t}}\textrm{W}$ differential cross sections and the leptonic charge asymmetry at $\sqrt{s}=13$ TeV

Measurements of properties of top quark-antiquark pair production in association with a W boson in proton-proton collisions at a center-of-mass energy of 13 TeV are presented, using a data sample corresponding to an integrated luminosity of 138 fb −1 , recorded by the CMS experiment at the CERN LHC. Events are selected based on the presence of either two leptons with the same electric charge or three leptons, and multiple jets and b-tagged jets. We present measurements of differential production cross sections as a function of kinematic variables sensitive to different aspects of the process modeling, using a multivariate discriminator in the two-lepton selection region and a simple selection-based method in the three-lepton region. The normalized cross section measurements are generally consistent with the standard model expectations, while we observe larger values compared to the expectations in the absolute cross section measurements, consistent with previous inclusive cross section measurements. In addition, we measure the leptonic charge asymmetry of this process, obtaining an observed value of ${A}_c^{\ell }=-{0.19}_{-0.18}^{+0.16}$, consistent with the expectation of −0.085 ± 0.006 predicted by next-to-leading order simulations.

Hadron-Hadron Scattering↗

Measurement of differential and integrated fiducial cross sections for Higgs boson production in the four-lepton decay channel in pp collisions at $ \sqrt{s}=7 $ and 8 TeV

Integrated fiducial cross sections for the production of four leptons via the H → 4ℓ decays (ℓ = e, μ) are measured in pp collisions at $ \sqrt{s}=7 $ and 8TeV. Measurements are performed with data corresponding to integrated luminosities of 5.1 fb$^{–1}$ at 7TeV, and 19.7 fb$^{–1}$ at 8 TeV, collected with the CMS experiment at the LHC. Differential cross sections are measured using the 8 TeV data, and are determined as functions of the transverse momentum and rapidity of the four-lepton system, accompanying jet multiplicity, transverse momentum of the leading jet, and difference in rapidity between the Higgs boson candidate and the leading jet. A measurement of the Z → 4ℓ cross section, and its ratio to the H → 4ℓ cross section is also performed. All cross sections are measured within a fiducial phase space defined by the requirements on lepton kinematics and event topology. Here, the integrated H → 4ℓ fiducial cross section is measured to be 0.56$_{–0.44}^{+0.67}$ (stat)$_{–0.06}^{+0.21}$ (syst) fb at 7 TeV, and 1.11$_{–0.35}^{+0.41}$ (stat)$_{–0.10}^{+0.14}$ (syst) fb at 8 TeV. The measurements are found to be compatible with theoretical calculations based on the standard model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of differential production cross sections for a Z boson in association with jets in pp collisions at $ \sqrt{s}=8 $ TeV

Cross sections for the production of a Z boson in association with jets in proton-proton collisions at a centre-of-mass energy of $ \sqrt{s}=8 $ TeV are measured using a data sample collected by the CMS experiment at the LHC corresponding to 19.6 fb$^{−1}$. Differential cross sections are presented as functions of up to three observables that describe the jet kinematics and the jet activity. Correlations between the azimuthal directions and the rapidities of the jets and the Z boson are studied in detail. The predictions of a number of multileg generators with leading or next-to-leading order accuracy are compared with the measurements. The comparison shows the importance of including multi-parton contributions in the matrix elements and the improvement in the predictions when next-to-leading order terms are included.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Combination of inclusive and differential $ \mathrm{t}\overline{\mathrm{t}} $ charge asymmetry measurements using ATLAS and CMS data at $ \sqrt{s}=7 $ and 8 TeV

This paper presents combinations of inclusive and differential measurements of the charge asymmetry (A$_{C}$) in top quark pair $ \left(\mathrm{t}\overline{\mathrm{t}}\right) $ events with a lepton+jets signature by the ATLAS and CMS Collaborations, using data from LHC proton-proton collisions at centre-of-mass energies of 7 and 8 TeV. The data correspond to integrated luminosities of about 5 and 20 fb$^{−1}$ for each experiment, respectively. The resulting combined LHC measurements of the inclusive charge asymmetry are A$_{C}^{CHC7}$ = 0.005 ± 0.007 (stat) ± 0.006(syst) at 7 TeV and A$_{C}^{CHC8}$ = 0.0055 ± 0.0023 (stat) ± 0.0025 (syst) at 8 TeV. These values, as well as the combination of A$_{C}$ measurements as a function of the invariant mass of the $ \mathrm{t}\overline{\mathrm{t}} $ system at 8 TeV, are consistent with the respective standard model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

EFT for soft drop double differential cross section

We develop a factorization framework to compute the double differential cross section in soft drop groomed jet mass and groomed jet radius. We describe the effective theories in the large, intermediate, and small groomed jet radius regions defined by the interplay of the jet mass and the groomed jet radius measurement. As an application we present the NLL' results for the perturbative moments that are related to the coefficients C 1 and C 2 that specify the leading hadronization corrections up to three universal parameters. We compare our results with Monte Carlo simulations and a calculation using the coherent branching method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of the inclusive and differential $t\overline{t}γ$ cross sections in the dilepton channel and effective field theory interpretation in proton-proton collisions at $\sqrt{s}$ = 13 TeV

The production cross section of a top quark pair in association with a photon is measured in proton-proton collisions in the decay channel with two oppositely charged leptons (e ± μ ∓ , e + e - , or μ + μ - ). The measurement is performed using 138 fb -1 of proton-proton collision data recorded by the CMS experiment at √s = 13 TeV during the 2016–2018 data-taking period of the CERN LHC. A fiducial phase space is defined such that photons radiated by initial-state particles, top quarks, or any of their decay products are included. An inclusive cross section of 175.2 ± 2.5(stat) ± 6.3(syst) fb is measured in a signal region with at least one jet coming from the hadronization of a bottom quark and exactly one photon with transverse momentum above 20 GeV. Differential cross sections are measured as functions of several kinematic observables of the photon, leptons, and jets, and compared to standard model predictions. The measurements are also interpreted in the standard model effective field theory framework, and limits are found on the relevant Wilson coefficients from these results alone and in combination with a previous CMS measurement of the tt¯γ production process using the lepton+jets final state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the total and differential Higgs boson production cross-sections at $ \sqrt{s} $ = 13 TeV with the ATLAS detector by combining the H → ZZ* → 4ℓ and H → γγ decay channels

The total and differential Higgs boson production cross-sections are measured through a combined statistical analysis of the H → ZZ* → 4ℓ and H → γγ decay channels. The results are based on a dataset of 139 fb –1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, recorded by the ATLAS detector at the Large Hadron Collider. The measured total Higgs boson production cross-section is $55.5$$^{+4.0}_{–3.8}$ pb, consistent with the Standard Model prediction of 55.6 ± 2.5 pb. All results from the two decay channels are compatible with each other, and their combination agrees with the Standard Model predictions. A combined statistical interpretation of the measured fiducial cross-sections as a function of the Higgs boson transverse momentum is performed in order to probe the Yukawa couplings to the bottom and charm quarks. A similar interpretation is performed by including also the constraints from the measurements of Higgs boson production in association with a W or Z boson in the H → bb¯ and cc¯ decay channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗