Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

On the Design and Test of a Liquid Injection Electric Thruster

A liquid injection electric thruster (LINJET) was designed and tested. The results of the tests were very encouraging with thruster performance levels well in excess of design goals. Supporting activities to the engine design and test included a five-million pulse life test on the main capacitor, a 46-million pulse test on the trigger electronics, design and fabrication of a zero resistance torque connector for use with the torsional pendulum thrust stand, design and fabrication of a logic box for control of engine firing, and a physical and chemical properties characterization of the perfluorocarbon propellant. While the results were encouraging, testing was limited, as many problems existed with the design. The most significant problem was involved with excessive propellant flow which contributed to false triggering and shorting. Low power active thermal control of the propellant storage cavity, coupled with a re-evaluation of the injection ring pore size and area exposed to the main capacitor discharge are areas that should be investigated should this design be carried forward.

Jones, T. A.↗
NASA NTRS1973

Evaluation of V/STOL research aircraft design

The evaluation and evolution of direct jet lift V/STOL transport aircraft designs are discussed. The V/STOL transport design selected as an example is a lift-fan design that was evaluated as a candidate configuration for a possible future V/STOL research transport. The paper includes discussion of potential advanced V/STOL landing approach profiles as key design requirements for V/STOL aircraft, description and experimental results of an integrated propulsion/control system designed to achieve desired advanced V/STOL near-terminal operating capabilities, and results from evaluating V/STOL designs on piloted moving-base simulators. This paper discusses use of the piloted moving-base simulator as a design tool for evolving satisfactory V/STOL stabilization and propulsion/control systems. Included are problems and solutions identified during simulation of simultaneous decelerating/descent steep curved landing approaches under instrument flight conditions. Simulation results are also compared to flight results obtained with the DO-31 V/STOL research transport.

Deckert, W. H.↗
NASA NTRS1974

Space station prototype Sabatier reactor design verification testing

A six-man, flight prototype carbon dioxide reduction subsystem for the SSP ETC/LSS (Space Station Prototype Environmental/Thermal Control and Life Support System) was developed and fabricated for the NASA-Johnson Space Center between February 1971 and October 1973. Component design verification testing was conducted on the Sabatier reactor covering design and off-design conditions as part of this development program. The reactor was designed to convert a minimum of 98 per cent hydrogen to water and methane for both six-man and two-man reactant flow conditions. Important design features of the reactor and test conditions are described. Reactor test results are presented that show design goals were achieved and off-design performance was stable.

Cusick, R. J.↗
NASA NTRS1970

Handbook for Weight Estimating and Forecasting of Manned Space Systems During Conceptual Design. Volume II

Volume I of the Handbook for Weight Estimating and Forecasting of Manned Space Systems during Conceptual Design contains two manual methods of preliminary weight estimation, plus weight growth data and two methods for forecasting weight growth. The two weight estimation methods in Volume I are recommended for rapid use only during the earliest phases of design when mission knowledge and design parameters are at a minimum. Volume II contains a detailed point design method of preliminary weight estimation, to be used by either manual or computer means. This method enables greater in-depth weight assessments of designs when the necessary mission knowledge and design parameters are available. Volume II also contains the description of an associated or independent (user's option) space transportation system sizing program which has the capability of altering a point design configuration, as necessary, to assure vehicle weight, size and performance compatibility.

Source record↗
NASA NTRS1974

On computer-aided design of aerospace vehicles

Digital computers are being used in many engineering activities to support design work. This paper provides an overview of some of this work as it relates to the design of aerospace vehicles. Discussions are given of some of the complexities of the design process which lead to large design costs and time. A number of important but disjointed computer capabilities have evolved over the years in analysis, optimization, and graphics, and such capabilities aid in addressing the problem of design complexity. Examples of existing computer-aided design (CAD) systems are given and trends for future CAD systems are indicated, as well as their relationship to pertinent data management technology. It is suggested that major gains in design capability will occur through continued development of CAD methodology and that these gains may be accelerated through a large focused effort.

Sobieszczanski, J. E.↗
NASA NTRS1976

Aircraft digital control design methods

Variations in design methods for aircraft digital flight control are evaluated and compared. The methods fall into two categories; those where the design is done in the continuous domain (or s plane) and those where the design is done in the discrete domain (or z plane). Design method fidelity is evaluated by examining closed loop root movement and the frequency response of the discretely controlled continuous aircraft. It was found that all methods provided acceptable performance for sample rates greater than 10 cps except the uncompensated s plane design method which was acceptable above 20 cps. A design procedure based on optimal control methods was proposed that provided the best fidelity at very slow sample rates and required no design iterations for changing sample rates.

Powell, J. D.↗
NASA NTRS1976

Design of a control configured tanker aircraft

The benefits that accrue from using control configured vehicle (CCV) concepts were examined along with the techniques for applying these concepts to an advanced tanker aircraft design. Reduced static stability (RSS) and flutter mode control (FMC) were the two primary CCV concepts used in the design. The CCV tanker was designed to the same mission requirements specified for a conventional tanker design. A seven degree of freedom mathematical model of the flexible aircraft was derived and used to synthesize a lateral stability augmentation system (SAS), a longitudinal control augmentation system (CAS), and a FMC system. Fatigue life and cost analyses followed the control system synthesis, after which a comparative evaluation of the CCV and conventional tankers was made. This comparison indicated that the CCV weight and cost were lower but that, for this design iteration, the CCV fatigue life was shorter. Also, the CCV crew station acceleration was lower, but the acceleration at the boom operator station was higher relative to the corresponding conventional tanker. Comparison of the design processes used in the CCV and conventional design studies revealed that they were basically the same.

Walker, S. A.↗
NASA NTRS1976

Computer method for design of acoustic liners for turbofan engines

A design package is presented for the specification of acoustic liners for turbofans. An estimate of the noise generation was made based on modifications of existing noise correlations, for which the inputs are basic fan aerodynamic design variables. The method does not predict multiple pure tones. A target attenuation spectrum was calculated which was the difference between the estimated generation spectrum and a flat annoyance-weighted goal attenuated spectrum. The target spectrum was combined with a knowledge of acoustic liner performance as a function of the liner design variables to specify the acoustic design. The liner design method at present is limited to annular duct configurations. The detailed structure of the liner was specified by combining the required impedance (which is a result of the previous step) with a mathematical model relating impedance to the detailed structure. The design procedure was developed for a liner constructed of perforated sheet placed over honeycomb backing cavities. A sample calculation was carried through in order to demonstrate the design procedure, and experimental results presented show good agreement with the calculated results of the method.

Minner, G. L.↗
NASA NTRS1976

Conceptual design of reduced energy transports

The paper reports the results of a conceptual design study of new near-term fuel-conservative aircraft. A parametric study was made to determine the effects of cruise Mach number and fuel cost on the optimum configuration characteristics and relative economic performance. Supercritical wing technology and advanced engine cycles were assumed. For each design, the wing geometry was selected to maximize an economic figure of merit which reflects the potential rate of return on investment. Based on the results of the parametric study, a reduced energy configuration was selected. Compared with existing transport design, the reduced energy design has a higher aspect ratio wing with lower sweep, and cruises at a slightly lower Mach number. It yields about 30% more seat-miles/gal than current wide-body aircraft. At the higher fuel costs anticipated in the future, the reduced energy design has about the same economic performance as existing designs with the same technology level. As an example of a far-term technology application, a design with a composite material wing was also investigated.

Ardema, M. D.↗
NASA NTRS1976

A comparison of digital flight control design methods

Many variations in design methods for aircraft digital flight control have been proposed in the literature. In general, the methods fall into two categories: those where the design is done in the continuous domain (or s-plane), and those where the design is done in the discrete domain (or z-plane). This paper evaluates several variations of each category and compares them for various flight control modes of the Langley TCV Boeing 737 aircraft. Design method fidelity is evaluated by examining closed loop root movement and the frequency response of the discretely controlled continuous aircraft. It was found that all methods provided acceptable performance for sample rates greater than 10 cps except the 'uncompensated s-plane design' method which was acceptable above 20 cps. A design procedure based on optimal control methods was proposed that provided the best fidelity at very slow sample rates and required no design iterations for changing sample rates.

Powell, J. D.↗
NASA NTRS1976

Roller bearing geometry design

A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

Savage, M.↗
NASA NTRS1977

Design study of superconducting magnets for a combustion magnetohydrodynamic (MHD) generator

Design trade off studies for 13 different superconducting magnet systems were carried out. Based on these results, preliminary design characteristics were prepared for several superconducting magnet systems suitable for use with a combustion driven MHD generator. Each magnet generates a field level of 8 T in a volume 1.524 m (60 in.) long with a cross section 0.254 m x 0.254 m (10 in. x 10 in.) at the inlet and 0.406 m x .406 m (16 in. x 16 in.) at the outlet. The first design involves a racetrack coil geometry intended for operation at 4.2 K; the second design uses a racetrack geometry at 2.0 K; and the third design utilizes a rectangular saddle geometry at 4.2 K. Each case was oriented differently in terms of MHD channel axis and main field direction relative to gravity in order to evaluate fabrication ease. All cases were designed such that the system could be disassembled to allow for alteration of field gradient in the MHD channel by changing the angle between coils. Preliminary design characteristics and assembly drawings were generated for each case.

Thome, R. J.↗
NASA NTRS1977

Study of metallic structural design concepts for an arrow wing supersonic cruise configuration

A structural design study was made, to assess the relative merits of various metallic structural concepts and materials for an advanced supersonic aircraft cruising at Mach 2.7. Preliminary studies were made to ensure compliance of the configuration with general design criteria, integrate the propulsion system with the airframe, select structural concepts and materials, and define an efficient structural arrangement. An advanced computerized structural design system was used, in conjunction with a relatively large, complex finite element model, for detailed analysis and sizing of structural members to satisfy strength and flutter criteria. A baseline aircraft design was developed for assessment of current technology. Criteria, analysis methods, and results are presented. The effect on design methods of using the computerized structural design system was appraised, and recommendations are presented concerning further development of design tools, development of materials and structural concepts, and research on basic technology.

Turner, M. J.↗
NASA NTRS1978

Thermal design for areas of interference heating on actively cooled hypersonic aircraft

Numerous actively cooled panel design alternatives for application in regions on high speed aircraft that are subject to interference heating effects were studied. Candidate design concepts were evaluated using mass, producibility, reliability and inspectability/maintainability as figures of merit. Three design approaches were identified as superior within certain regimes of the matrix of design heating conditions considered. Only minor modifications to basic actively cooled panel design are required to withstand minor interference heating effects. Designs incorporating internally finned coolant tubes to augment heat transfer are recommended for moderate design heating conditions. At severe heating conditions, an insulated panel concept is required.

Herring, R. L.↗
NASA NTRS1978

Design of a transonically profiled wing

The application of well known design concepts with the combined use of thick transonic profiles to aircraft wing design was investigated. Optimization in terms of weight and operational costs was emphasized. It is shown that the usual design criteria and concepts are too restricted and do not sufficiently represent the physical processes over the wing. Suggestions are made for improving this situation, and a design example given. Compared with a wing design according to previously used criteria, the new design is found to be superior in the most important functions. It is concluded that an isobar concept adjusted to the planform in conjunction with an 'organically' designed wing will lead to the weight optimum solutions of wing profiles.

Kiekebusch, B.↗
NASA NTRS1977

Robustness of linear quadratic state feedback designs in the presence of system uncertainty

In connection with difficulties concerning an accurate mathematical representation of a linear quadratic state feedback (LQSF) system, it is often necessary to investigate the robustness (stability) of an LQSF design in the presence of system uncertainty and obtain some quantitative measure of the perturbations which such a design can tolerate. A study is conducted concerning the problem of expressing the robustness property of an LQSF design quantitatively in terms of bounds on the perturbations (modeling errors or parameter variations) in the system matrices. Bounds are obtained for the general case of nonlinear, time-varying perturbations. It is pointed out that most of the presented results are readily applicable to practical situations for which a designer has estimates of the bounds on the system parameter perturbations. Relations are provided which help the designer to select appropriate weighting matrices in the quadratic performance index to attain a robust design. The developed results are employed in the design of an autopilot logic for the flare maneuver of the Augmentor Wing Jet STOL Research Aircraft.

Patel, R. V.↗
NASA NTRS1977

Trajectory design aspects of a proposed NASA/ESA Out-of-Ecliptic mission

The reported investigation has the objective to show how a loosely constrained set of mission design parameters can be analyzed to design trajectories that can satisfy both science and mission requirements. A description is presented of methods for handling several loosely constrained mission design parameters. An example trajectory design is generated. It is found that tradeoffs exist between science payload, maximum heliographic latitude, and the particular trajectory design strategy selected. An analysis shows that even with the help of contour plots, judicious specifications of constraints for the mission design parameter values will be necessary if the mission design process is to be manageable.

Wallace, R. A.↗
NASA NTRS1978

Ion Propulsion Module design and mission performance

This paper describes the design options, processes and tradeoffs that occur during the establishment of viable Ion Drive vehicle and mission designs. The options identify those internal vehicle design alternatives which are being considered for future Ion Drive missions, such as sunlight concentrating arrays and direct drive thrust subsystems, and their effect on mission performance. Also, the highly interactive nature of the Ion Drive design process, which occurs between the spacecraft and mission designers, is described. The results of design tradeoffs, performed for three Ion Drive comet rendezvous missions, are presented. These results include the following: (1) the power profile is determined primarily by the trajectory while second order effects include the solar cell characteristics and array concentration factor and degradation; and (2) the dominant parameter in mission performance determination, Ion Propulsion Module (IPM) mass, and IPM design, is the total cell power evaluated without concentration, at the beginning of life and at 1 AU.

Graf, J. E.↗