Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Selecting optimum algorithms for image processing

Collection of registration, compression, and classification algorithms allows users to evaluate approaches and select best one for particular application. Program includes six registration algorithms, six compression algorithms, and two classification algorithms. Package also includes routines for evaluating effects of processing on image data. Collection is written in FORTRAN IV for batch execution.

Jaroe, R. R.↗

Failure mechanisms

Data, charts, and graphs relating to longitudinal tension, crack growth modes in unidirectional composites, strength predictions, and compression are given.

Hahn, H. T.↗

Compact finite difference schemes for the Euler and Navier-Stokes equations

Implicit compact finite difference schemes for the Euler equations are described which furnish equivalent treatment of the conservation and nonconservation forms; a simple modification yields an entropy-producing scheme. An extension of the scheme also treats the compressible Navier-Stokes equations; when the viscosity and heat conduction coefficients are negligible only the boundary data appropriate to the Euler equation influence the solution to any significant extent, a result consistent with singular perturbation theory.

Rose, M. E.↗

Non-nulling seven-hole probes for high angle flow measurement

This paper illustrates a method for calibrating seven-hole probes to measure local total and static pressures and relative flow angles of up to 70 degrees in subsonic compressible flows. The method of Latin Squares was used to statistically sample a large and otherwise unmanageable data set, thereby reducing to a minimum the number of data points required to construct a polynomial curve fit to the data. Calibration produces three-variable third order polynomials which permit all of the desired flow properties to be found explicitly from probe measured pressures. This method determines the flow angles to within 2 degrees and Mach number to within 0.04 with 95 percent certainty.

Gerner, A. A.↗

Magnetic configuration of the Venus magnetosheath

A data set consisting of nearly six Venus years of Pioneer Venus Orbiter magnetometer data is analyzed in order to describe the configuration of the magnetosheath. A coordinate system is developed which isolates the effects of the solar wind flow and the interplanetary magnetic field (IMF). The data indicate that the magnetosheath field magnitude is responsive to solar wind dynamic pressure and that the compression of the upstream field is controlled by magnetosonic Mach number. The draping of the field is similar to that predicted by gasdynamic modeling; specific draping features include distinct dependence on the radial and the transverse components of the IMF, and a tendency of the field to encircle the planet at low altitude. Certain features of the processes of mass loading by magnetosheath fluctuations and by the motional electric field are examined. Magnetic fluctuations can dominate the magnetosheath field for periods of low interplanetary cone angle and in general for the magnetosheath regions near the quasi-parallel part of the bow shock. The magnetosheath magnetic field magnitude displays a hemispherical asymmetry; the sense of this asymmetry is controlled by the cross-flow component of the IMF in a manner which indicates that ion pickup by the convective electric field occurs preferentially in one hemisphere. The results of this survey indicate that mass loading is a significant process which should be incorporated into computational models but that a fluid treatment of the planetary ion component may not be appropriate.

Phillips, J. L.↗

A coupled marching procedure for the partially parabolized Navier-Stokes equations

A coupled finite-difference formulation is described for solving a reduced form of the compressible Navier-Stokes equations by a multiple space marching procedure. The properties of the equations are discussed and the solution algorithm presented. The scheme is used to compute incompressible flows by taking the incompressible limit (M about 0.1) of the compressible formulation. A separate Poisson equation is not required for the pressure. Results are compared with experimental data and other numerical predictions for low Reynolds number channel inlet flow, flow over a rearward-facing step in a channel, and flow near the trailing edge of a flat plate.

Liu, Xuezong↗

Magnetospheric ULF waves observed during the major magnetospheric compression of November 1, 1984

The magnetospheric ULF waves observed during the magnetospheric compression event of November 1, 1984, were investigated using the magnetic field and medium-energy ion data obtained by the AMPTE Charge Composition Explorer. The electric field of ULF waves was inferred from the particle data, using a method developed on the basis of the gyration acceleration mechanism. Three types of waves were found: (1) a 10-15-min wave with perturbations in the magnetic field intensity and in the flux of ions; (2) a 3-5-min standing Alfven wave with perturbations in the azimuthal magnetic field component and in the radial component of the electric field; and (3) a 2-5-min irregular disturbance near the magnetopause, which involves all components of the magnetic field and the intensity of the ion flux. The origins of these waves are discussed.

Takahashi, K.↗

Effects of elevated temperature on the viscoplastic modeling of graphite/polymeric composites

To support the development of new materials for the design of next generation supersonic transports, a research program is underway at NASA to assess the long term durability of advanced polymer matrix composites (PMC's). One of main objectives of the program was to explore the effects of elevated temperature (23 to 200 C) on the constitutive model's material parameters. To achieve this goal, test data on the observed nonlinear, stress-strain behavior of IM7/5260 and IM7/8320 composites under tension and compression loading were collected and correlated against temperature. These tests, conducted under isothermal conditions using variable strain rates, included such phenomena as stress relaxation and short term creep. The second major goal was the verification of the model by comparison of analytical predictions and test results for off axis and angle ply laminates. Correlation between test and predicted behavior was performed for specimens of both material systems over a range of temperatures. Results indicated that the model provided reasonable predictions of material behavior in load or strain controlled tests. Periods of loading, unloading, stress relaxation, and creep were accounted for.

Gates, Thomas S.↗

Bending response of thin-walled laminated composite cylinders

Closed-form linear response solutions are presented for the bending response of thin-walled laminated composite cylinders. Displacements and intralaminar stresses are computed using the Donnell theory, and interlaminar stresses are computed using 3D equilibrium equations of elasticity. Laminates with stacking sequencies and an aluminum cylinder are used to illustrate the displacement response, intralaminar, and interlaminar stresses for two length-to-radius ratios of 1 and 5. Data obtained indicate that if only fiber breakage causes ultimate failure, material failure will occur on the compression side of the cylinders, at the ends, due to fiber compression. The interlaminar normal stress is an order of magnitude smaller than the interlaminar shear stresses and it is not likely to initiate failure.

Fuchs, H. P.↗

Cosmic-ray variations and magnetic field fluctuations in the outer heliosphere

We have formally confirmed that galactic cosmic ray intensity variations measured by Voyager 2 during recovery from solar maximum are caused by travelling compressions and rarefactions in the mean interplanetary magnetic field. We used Voyager's nearly continuous magnetic field data as input to a time-independent, spherically-symmetric, cosmic ray transport equation in the force-field approximation. The solutions closely followed the count rate of cosmic rays greater than 75 MeV/nucleon over four years. This strongly supports prior theoretical assertions that turbulent interaction regions travelling with the solar wind are the major cause of the solar-cycle variation of galactic cosmic rays in the ecliptic region.

Perko, J. S.↗

Schlieren Imaging Of An Aircraft In Flight

Technique for making schlieren images of airplanes and missiles in supersonic flight devised to help understand physics of compressible aerodynamic flows about complicated aircraft shapes. Technique also used to study far-field sonic booms. Data obtained from schlieren images useful in optimizing designs of prototype aircraft. Technique incorporates elements of focusing schlieren photography, astronomical photography, and streak photography. Using sun or moon as source of light, apparatus forms image revealing gradients of density in air flow.

Weinstein, Leonard M.↗

Observations of Earthward and tailward propagating flux rope plasmoids: Expanding the plasmoid model of geomagnetic substorms

A survey of Interplanetary Monitoring Platform (IMP 8) magnetometer data for plasmoid signatures during magnetospheric intervals from 1981 through 1983 found 16 plasmoids and 37 traveling compression regions as well as two earthward propagating flux ropes and 19 south-north bipolar lobe signatures. The properties of these relatively near-Earth plasmoids, traveling compression regions, and earthward propagating flux ropes and a qualitative model for their formation are presented. The plasmoids have estimated sizes, durations, magnetic field signatures, downtail velocities, and substorm associations very similar to those of the plasmoids identified in International Sun-Earth Explorer (ISEE) 3 deep-tail observations. The occurrence frequency of these near-Earth plasma sheet plasmoids is significantly smaller than that of plasmoids found in the mid- and deep tail with ISEE 3. The earthward propagating flux ropes are characterized by a south-north bipolar turning in the Geocentric Solar Magnetospheric (GSM) B(sub z) component, are localized near the noon-midnight meridional plane, and are strongly correlated with interplanetary magnetic field B(sub z) north and small isolated high latitude geomagnetic substorms. These events are also apparently very rare and/or spatially localized. We propose that these structures are 'proto-plasmoids,' i.e., plasmoids for which near-Earth magnetic reconnection stopped before all the closed plasma sheet field lines were reconnected. The proto-plasmoids are then 'trapped' inside closed magnetic field lines and propagate earthward owing to the effect of the distant X-line's earthward plasma flow. We suggest that the two different 'types' of plasmoids are due to the different energy states of the magnetosphere during periods of southward and northward interplanetary magnetic field.

Moldwin, Mark B.↗

Data-parallel lower-upper relaxation method for reacting flows

The implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method of Yoon and Jameson is modified for use on massively parallel computers. The method has been implemented on the Thinking Machines CM-5 and the MasPar MP-1 and MP-2, where large percentages of the theoretical peak floating point performance are obtained. It is shown that the new data-parallel LU relaxation method has better convergence properties than the original method for two different inviscid compressible flow simulations. The convergence is also improved for five-species reacting air computations. The performance of the method on various partitions of the CM-5 and on the MasPar computers is discussed. The new method shows promise for the efficient simulation of very large perfect gas and reacting flows.

Candler, Graham V.↗

Design and Evaluation of a New Boundary-Layer Rake for Flight Testing

A new boundary-layer rake has been designed and built for flight testing on the NASA Dryden Flight Research Center F-15B/Flight Test Fixture. A feature unique to this rake is its curved body, which allows pitot tubes to be more densely clustered in the near-wall region than conventional rakes allow. This curved rake design has a complex three-dimensional shape that requires innovative solid-modeling and machining techniques. Finite-element stress analysis of the new design shows high factors of safety. The rake has passed a ground test in which random vibration measuring 12 g rms was applied for 20 min in each of the three normal directions. Aerodynamic evaluation of the rake has been conducted in the NASA Glenn Research Center 8 x 6 Supersonic Wind Tunnel at Mach 0-2. The pitot pressures from the new rake agree with conventional rake data over the range of Mach numbers tested. The boundary-layer profiles computed from the rake data have been shown to have the standard logarithmic-law profile. Skin friction values computed from the rake data using the Clauser plot method agree with the Preston tube results and the van Driest II compressible skin friction correlation to approximately +/-5 percent.

Bui, Trong T.↗

Compression Buckling Behavior of Large-Scale Friction Stir Welded and Riveted 2090-T83 Al-Li Alloy Skin-Stiffener Panels

To evaluate the potential of friction stir welding (FSW) as a replacement for traditional rivet fastening for launch vehicle dry bay construction, a large-scale friction stir welded 2090-T83 aluminum-lithium (Al-Li) alloy skin-stiffener panel was designed and fabricated by Lockheed-Martin Space Systems Company - Michoud Operations (LMSS) as part of NASA Space Act Agreement (SAA) 446. The friction stir welded panel and a conventional riveted panel were tested to failure in compression at the NASA Langley Research Center (LaRC). The present paper describes the compression test results, stress analysis, and associated failure behavior of these panels. The test results provide useful data to support future optimization of FSW processes and structural design configurations for launch vehicle dry bay structures.

Hoffman, Eric K.↗

Mechanical Properties of 17-4PH Stainless Steel Foam Panels

Rectangular 17-4PH stainless steel sandwiched foam panels were fabricated using a commercial manufacturing technique by brazing two sheets to a foam core. Microstructural observations and ultrasonic nondestructive evaluation of the panels revealed large variations in the quality of the brazed areas from one panel to the next as well as within the same panel. Shear tests conducted on specimens machined from the panels exhibited failures either in the brazed region or in the foam core for the poorly brazed and well-brazed samples, respectively. Compression tests were conducted on the foam cores to evaluate their elastic and plastic deformation behavior. These data were compared with published data on polymeric and metallic foams, and with theoretical deformation models proposed for open cell foams.

Raj, S. V.↗

Evaluation of High-Temperature Fabrics for Improved Performance of Seals and Thermal Barriers

Hypersonic and space flight applications continue to push material demands of component-level technologies such as high-temperature seals and thermal barriers. NASA Glenn Research Center continues to develop and evaluate materials and coatings as well as thermal barrier designs for these applications. Experimental test data is presented for two different sheath fabrics that were evaluated in full thermal barrier assemblies through compression and wear testing at elevated temperatures, as well as flow testing at ambient temperature.

Seals↗

DEVELOPMENT OF DESIGN STRENGTH LEVELS FOR THE ELASTIC STABILITY OF MONOCOQUE CONES UNDER AXIAL COMPRESSION

Design relationships have been derived for the determination of elastic buckling strength levels for unpressurized monocoque truncated cones under axial compression. Theoretical implications have been considered in the establishment of a semi-empirical analysis leading to the development of probability based design expressions. Data from 170 tests by various investigators were statistically evaluated for the expected mean, 90%, and 99% probability strength levels. Dispersion of data was found to be slightly less than that of monocoque cylinders. Non-linear effects of radius to thickness ratio or strength deterioration with length to radius ratio were not discernible.

AXIAL COMPRESSION↗