Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DYES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Long-pulse-width variable-wavelength chirped pulse generator and method

A device for creating an optic pulse with different wavelengths separated by time. A pump laser is configured to output energy to a dye cell which, responsive to the energy, outputs an optic pulse. Mirrors direct the optic pulse away from the dye cell towards a spectrograph. The spectrograph has an input and two or more outputs. The spectrograph receives and converts the optic pulse to a wavelength separated optic signal presented on the two or more outputs. A first optic cable has an input end and an output end. The input end receives a first output from the spectrograph. A second optic cable has an input end and an output end. The input end receives a second output from the spectrograph. The second optic cable is a different length than the first optic cable to establish a time shift between the signals exiting the first and second cable.

42 ENGINEERING↗

Comparison of temperature adaptive calibration methods for laser induced fluorescence based fuel-in-oil instrument

Fuel dilution of engine oil (or fuel-in-oil, FiO) is an important issue as multiple and late-cycle fuel injection, integral to many combustion efficiency and emissions improvements (e.g., downsized boosted gasoline engines and catalyst thermal management) increases FiO rate. In addition to causing general wear and corrosion in engine due to decreased oil viscosity and pH buffering, FiO is also believed to cause destructive low speed pre-ignition (or super knock) in boosted SI engines. To understand the effects of engine operating conditions on the FiO rate, an optical diagnostic capable of measuring transient FiO on minute timescales was recently developed and demonstrated on a modified GM Ecotech engine system (Neupane et al., Applied Spectroscopy 2021). The measurement is based on adding a dye to the fuel and monitoring for its presence in oil via laser-induced fluorescence (LIF). The measured LIF signal is related to FiO concentration via pre-determined calibration factors using a multivariate classical least square (CLS) method.Since fluorescence quantum yield is a function of temperature, measured LIF intensity not only depends on FiO concentration but also oil temperature. To expand the applicability of the FiO diagnostic to transient oil-temperature conditions (e.g., cold start in practical engines), this study develops a method to account for oil-temperature variations. The effect of oil temperature (20°C - 95°C) on the LIF spectra of eight FiO samples ranging from ~0.8-15% was investigated. LIF intensities of the FiO samples decreased linearly with increasing temperature; the reductions being more significant at dye peaks. We develop a new calibration model (T-adaptive CLS) incorporating the temperature (T) effects on LIF intensity that enables simultaneous calculation of FiO and oil temperature. The improved FiO diagnostic with T-adaptive calibration is more robust, and applicable to varying oil-temperature conditions. For example, when strategies such as multiple/late fuel injections are applied to overcome cold-start instability due to use of low vaporization bio-based fuels such as ethanol, FiO rate is expected to be very high; the improved T-adaptive FiO diagnostic is hence relevant for engine- and fuel-system calibration and optimization. The diagnostic could also provide validation data for flow-field and spray interaction CFD models, further broadening the diagnostic’s utility for advancing engine technology and efficiency.

Neupane, Sneha↗

Coated fiber optic chemical and radiation sensors

Distributed fiber optic chemical and radiation sensors formed by coating the fibers with certain types of response materials are provided. For distributed chemical sensors, the coatings are reactive with the targets; the heat absorbed or released during a reaction will cause a local temperature change on the fiber. For distributed radiation sensors, coating a fiber with a scintillator enhances sensitivity toward thermal neutrons, for example, by injecting light into the fiber. The luminescent components in these materials are taken from conjugated polymeric and oligomeric dyes, metal organic frameworks with sorbed dyes, and two-photon-absorbing semiconductors. The compositions may exhibit strong gamma rejection. Other scintillators combining luminescent materials with neutron converters are available. With a multiple-layer coating, it may be possible to identify the presence of both neutrons and gamma rays, for example. Coatings may be applied during manufacture or in the field.

Lamberti, Vincent E.↗

pH-sensitive nanoparticles for detecting and preventing food spoilage

Nanoparticles and compositions thereof are provided for detecting and/or preventing food spoilage. Methods of making the nanoparticles and compositions, and methods of using the nanoparticles and compositions, e.g. in food packaging, are also provided. The nanoparticles can have a hydrophobic core containing a hydrophobic active agent, e.g. a hydrophobic dye and/or an antimicrobial agent, for detecting and/or preventing food spoilage. The nanoparticles can also have a copolymer of a hydrophobic polymer repeat unit, e.g. styrene or lactic acid, and a pH responsive dendrimer repeat unit. The pH responsive dendrimer repeat unit can have a pH responsive amine core having a plurality of branched acrylate arms extending therefrom. The nanoparticles can be chemically stable at neutral pH, and then release the hydrophobic active agent at a pH range indicative of food spoilage. By releasing the hydrophobic dye and/or antimicrobial agent, the nanoparticles can detect and/or inhibit food spoilage.

Tong, Zhaohui↗

Two inorganic-organic hybrid materials based on polyoxometalate anions and methylene blue: Preparations, crystal structures and properties

Two novel inorganic-organic hybrid materials based on an organic dye cation methylene blue (MB) and Lindqvist-type POM polyanions, [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}Mo{sub 6}O{sub 19} 2DMF (1) and [C{sub 22}H{sub 18}N{sub 3}S]{sub 2}W{sub 6}O{sub 19} 2DMF (2) were synthesized under ambient conditions and characterized by CV, IR spectroscopy, solid diffuse reflectance spectrum, UV-vis spectra in DMF solution, luminescent spectrum and single crystal X-ray diffraction. Crystallographic data reveal that compounds 1 and 2 are isostructural and both crystallize in the triclinic space group P1-bar . Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations and near distance interactions among organic dye cations, Lindqvist-type POM polyanions and DMF molecules. The solid diffuse reflectance spectra and UV-vis spectra in DMF solution appear new absorption bands ascribed to the charge-transfer transition between the cationic MB donor and the POM acceptors. Studies of the photoluminescent properties show that the formation of 1 and 2 lead to the fluorescence quenching of starting materials. -- Graphical abstract: Their crystal structures present that the layers of organic molecules and inorganic anions array alternatively, and there exist strong {pi}...{pi} stacking interactions between dimeric MB cations. Display Omitted

36 MATERIALS SCIENCE↗

Defect-resistant plastic scintillators with aliphatic additives

A plastic scintillator includes a polymer matrix, an aliphatic additive present in the polymer matrix in an effective amount to impart fog resistance to the plastic scintillator, and at least one fluorescent dye in the polymer matrix, the dye being effective to provide scintillation upon exposure to radiation. The effective amount of the aliphatic additive is in a range of greater than 0 weight percent up to 5 weight percent relative to the total weight of the plastic scintillator. Moreover, the aliphatic additive has a structure comprising up to 300 repeat units.

Mabe, Andrew Neil↗

Evidence of Radiosensitizing Effects of GdPO{sub 4} Nanostructures

Developing new methods to improve the outcome of cancer treatment has been one of the main research areas in medicine. Many approaches that allow for tumor targeting and thus reduction of side effects are currently under investigation. Among those, the combination of radiation therapy with certain chemotherapeutic agents has shown significant advances in cancer treatment. Another option is the use of radiosensitizers along with radiation therapy. Radiosensitizers are materials intended to enhance the radiation dose received in the tumor while maintaining the damage to the normal tissue to a minimum. Hence, the development of radiosensitizers has been of interest in recent years in order to improve the survival rate and the quality of life of the patient while reducing the cost of treatment. In this area, nanoparticles (NPs) have been widely explored as radiosensitizers due to the fact that tumor targeting can be achieved and the concentration of NPs on tumor environments can be greatly enhanced through the modification of NPs' surface by addition of agents such as antibodies. More importantly, the chemical composition of the NPs can be adjusted based on the application of interest. In this context, NPs that contain heavy elements have great potential as radiosensitizers due to their mechanisms of interaction with X-rays. For instance, gold NPs have been recognized as radiosensitizers due to their large photoelectric absorption coefficient. Furthermore, lanthanide based NPs have also shown characteristics as radiosensitizers. Among the various lanthanide containing NPs, gadolinium-based nanomaterials (NMs) have shown great potential for multiple applications in medicine such as contrast agents for magnetic resonance imaging (MRI). Additionally, the combination of gadolinium-based NPs and irradiation has evidenced a significant dose enhancement in in-vivo testing. Moreover, gadolinium-based ultra-small rigid platforms (USRPs) have shown theranostic properties for multimodal detection of lung cancers and radiosensitization effects. Among the various Gd based NPs, GdPO{sub 4} NMs are of increasing interest due to the multiple functions and applications that they may have. To illustrate, GdPO{sub 4} NPs have evidenced relaxitivities that are comparable to the contrast agents commonly used in MRI. Moreover, these NPs can be doped with different lanthanides ions allowing for the implementation of MRI and cellular luminescence for diagnostic purposes. Furthermore, gold-coated gadolinium-lanthanum phosphate NPs have evidenced their ability to encapsulate alpha-emitting radioisotopes of radiotherapeutic interest. This allows for targeted internal radiotherapy by functionalizing the NPs with specific molecules Moreover, low toxicity has been observed on dextran coated GdPO{sub 4} NPs regardless of the potential toxicity of free Gd{sup 3+}. Despite the various applications of GdPO{sub 4}, its response and interaction with X-ray evaluating their potential as radiosensitizers has not been explored. In this work, the radiosensitization of GdPO{sub 4} NMs is evidenced through the decomposition of a dye, methylene blue (MB), after X-ray radiation in the presence of NMs. GdPO{sub 4} was synthesized at moderate temperature following a hydrothermal method based on the precipitation reaction of a salt precursor and a surfactant. The crystalline structure and morphology of these NMs were characterized using Xray diffraction (XRD) and transmission electron microscopy (TEM). Crystalline GdPO{sub 4} was obtained following the hydrothermal synthesis. Besides, it was observed that the addition of GdPO{sub 4} to the MB solution enhances the decomposition of this dye under X-ray radiation. Therefore, GdPO{sub 4} NMs prove to be promising as radiosensitizers in radiation therapy. Nevertheless, the effect of GdPO{sub 4} on MB decomposition under X-ray radiation requires further study to evaluate the effect of the morphology and concentration of GdPO{sub 4} and the dose effect. (authors)

36 MATERIALS SCIENCE↗

Designs and Modeling of Architect Multi-material Scintillator System

We present a new conceptual radiation detector, the Architected Multimaterial Scintillator System, that utilizes a scintillator composed of multiple materials arranged in architected structures to enable new capabilities. By structuring differently-dyed materials, the wavelength of the scintillation light encodes additional information in radiation measurements. These structures can be realized through additive manufacture (3D-printing). Two classes of this concept are described and modelled using Monte Carlo simulations to evaluate their performance. The first detector design uses dye microstructures to encode particle tracking information, allowing for directional neutron detection and gamma/neutron discrimination. The second design uses a dye gradient to indicate the position of radiation along the gradient. The simulation results indicate this new concept in radiation detection can achieve strong performance in a variety of capabilities including particle identification, directionality and spectroscopy measurements, and particle position reconstruction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Methods for ultraviolet excitation microscopy of biological surfaces

Microscopy with Ultraviolet Surface Excitation (MUSE) for use in the classroom to enhance life sciences education and curricula, or for other applications, including without limtiation the operating room, other medical environments, research environments, and low resource environments. MUSE's suitability is based on multiple key factors including its simplicity of use, the incorporation of inexpensive hardware including LED illumination, and very basic tissue preparation. The ultraviolet excitation acts as passive optical sectioning confining the generated fluorescence signal to only a few micrometers below the tissue surface thus eliminating the out of focus signals. This facilitates image capture of tissue microstructure and organization from specimens at the intact or sliced surface arising from varying fluorophore concentration within the different cellular compartments. Although just the tissue auto fluorescence maybe used, image quality is enhanced with brief application of nontoxic fluorescent dyes to selectively highlight cellular compartments. Sample preparation is safe, efficient and familiar to students with basic chemistry or biology lab experience. Mixed-dye powders may be used to simplify translation of this method for educational, medical, research, low resource, and other settings.

Demos, Stavros G.↗

Durable Electrooptic Devices Comprising Ionic Liquids

Electrolyte solutions for electrochromic devices such as rear view mirrors and displays with low leakage currents are prepared using inexpensive, low conductivity conductors. Preferred electrolytes include bifunctional redox dyes and molten salt solvents with enhanced stability toward ultraviolet radiation. The solvents include lithium or quaternary ammonium cations, and perfluorinated sulfonylimide anions selected from trifluoromethylsulfonate (CF.sub.3SO.sub.3.sup.-), bis(trifluoromethylsulfonyl)imide ((CF.sub.3SO.sub.2).sub.2N.sup.-), bis(perfluoroethylsulfonyl)imide ((CF.sub.3CF.sub.2SO.sub.2).sub.2N.sup.-) and tris(trifluoromethylsulfonyl)methide ((CF.sub.3SO.sub.2).sub.3C.sup.-). Electroluminescent, electrochromic and photoelectrochromic devices with nanostructured electrodes include ionic liquids with bifunctional redox dyes. Some of the electrolyte solutions color to red when devices employing the solutions are powered, leading to red or neutral electrooptic devices.

Burrell, Anthony K↗

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO{sub 2}

B,N-TiO{sub 2} photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO{sub 2} were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 {sup o}C. Higher temperature may form many oxygen vacancies and Ti{sup 3+} species, resulting in the decrease of photocatalytic activity in visible light. -- Graphical abstract: The changes of photocatalytic activity of B,N-TiO{sub 2} with variable nitrogen doping temperatures are attributed to the transformation of surface structure and oxygen vacancies, and the Ti-O-B-N structure plays a vital role in photocatalytic activity under visible light irradiation. Display Omitted Research highlights: > B,N-TiO{sub 2} photocatalysts are synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. > The boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both. > The temperature of nitrogen doping affects the transformation of surface structure and oxygen vacancies. > The Ti-O-B-N structure plays an important role in photocatalytic activity under visible light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low cost, surfactant-less, one pot synthesis of Cu{sub 2}O nano-octahedra at room temperature

Cu{sub 2}O octahedra were successfully synthesized via a novel wet-chemical method using D-glucose and hydrazine as reducing agent at room temperature without the presence of any other surfactant. Presence of D-glucose was important for the stabilization of the evolved copper octahedra and also for facilitating the reduction of the Cu(II) ions. The existence of glucose moieties on the surface as capping agent was confirmed by the FT-IR spectra while there was presence of excess oxygen atoms on the surface leading to the formation of a thin CuO layer at the octahedra surface, as confirmed by the XPS study, probably promoted by the capping glucose. Effect of NaOH concentration on the reaction and the formation of octahedra was also studied. The formation mechanism of obtained Cu{sub 2}O octahedra has been discussed. These octahedra were then studied for their photocatalytic properties in degradation of organic dyes, rhodamine B and methyl orange. - Graphical abstract: Cu{sub 2}O octahedra were found to have thin layer of CuO, due to oxidation of surface Cu{sup +} atoms by the surfactant O atoms. Highlights: > Simple and inexpensive one pot synthesis of various Cu{sub 2}O nanostructures. > Surface properties studied by XPS. > Used as photocatalysis for degradation of rhodamine B.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microwave-assisted hydrothermal synthesis of marigold-like ZnIn{sub 2}S{sub 4} microspheres and their visible light photocatalytic activity

Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a microwave-assisted hydrothermal method with the temperature ranging from 80 to 195 Degree-Sign C. X-ray diffraction, X-ray photoelectron spectroscopy, nitrogen sorption analysis, UV-visible spectroscopy, scanning electron microscopy and transmission electron microscopy were used to characterize the products. It was found that the crystallographic structure and optical property of the products synthesized at different temperatures were almost the same. The degradation of methyl orange (MO) under the visible light irradiation has been used as a probe reaction to investigate the photocatalytic activity of as-prepared ZnIn{sub 2}S{sub 4}, which shows that the ZnIn{sub 2}S{sub 4} sample synthesized at 195 Degree-Sign C shows the best photocatalytic activity for MO degradation. In addition, the photocatalytic activities of all the samples prepared by the microwave-assisted hydrothermal method are better than those prepared by a normal hydrothermal method, which could be attributed to the formation of more defect sites during the microwave-assisted hydrothermal treatment. - Graphical abstract: Marigold-like ZnIn{sub 2}S{sub 4} microspheres were synthesized by a fast microwave-assisted hydrothermal method at 80-195 Degree-Sign C with a very short reaction time of 10 min. The as-prepared ZnIn{sub 2}S{sub 4} sample can be used as visible light photocatalyst for degradation of organic dyes. Highlights: Black-Right-Pointing-Pointer ZnIn{sub 2}S{sub 4} microspheres were synthesized by microwave-assisted hydrothermal method. Black-Right-Pointing-Pointer The crystal structure and optical property of the products were almost the same. Black-Right-Pointing-Pointer Increment of the temperature renders high surface area due to the bubbling effect. Black-Right-Pointing-Pointer The ZnIn{sub 2}S{sub 4} synthesized at 195 Degree-Sign C shows the best visible catalytic activity for MO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Light-Driven Oxidation of Alcohols Using an Organic Chromophore–Catalyst Assembly Anchored to TiO 2

In this work, the ligand 5-PO 3 H 2 -2,2':5',2"-terthiophene-5-trpy, T3 (trpy = 2,2':6',2"-terpyridine), was prepared and studied in aqueous solutions along with its metal complex assembly [Ru( T3 )(bpy)(OH 2 )] 2+ ( T3 -Ru-OH 2 , bpy = 2,2'-bipyridine). T3 contains a phosphonic acid group for anchoring to a TiO 2 photoanode under aqueous conditions, a terthiophene fragment for light absorption and electron injection into TiO 2 , and a terminal trpy ligand for the construction of assemblies comprising a molecular oxidation catalyst. At a TiO 2 photoanode, T3 displays efficient injection at pH 4.35 as evidenced by the high photocurrents (~350 uA/cm 2 ) arising from hydroquinone oxidation. Addition of [Ru(bpy)(OTf)][OTf] 2 (bpy = 2,2'-bipyridine, OTf – = triflate) to T3 at the free trpy ligand forms the molecular assembly, T3 -Ru-OH 2 , with the oxidative catalyst fragment: [Ru(trpy)(bpy)(OH 2 )] 2+ . Finally, the new assembly, T3 -Ru-OH 2 , was used to perform efficient light-driven oxidation of phenol (230 μA/cm 2 ) and benzyl alcohol (25 μA/cm 2 ) in a dye-sensitized photoelectrosynthesis cell.

36 MATERIALS SCIENCE↗

Depolymerization as a Design Strategy: Depolymerization Etching of Polymerization-Induced Microphase Separations

Thermally triggered depolymerization has traditionally been viewed through the lens of sustainability and recycling, not as a constructive tool for materials design. Herein, we show that selective, thermally triggered depolymerization to gaseous monomer serves as a solvent-free strategy for generating porosity in nanostructured polymer materials, offering a means to bypass the mass transport limitations inherent in conventional solution-based etching. As a demonstration platform, we employed polymerization-induced microphase separation (PIMS) to generate disordered bicontinuous block copolymer structures with embedded depolymerizable domains. By incorporating a methacrylate block susceptible to thermal depolymerization within a cross-linked, depolymerization-resistant styrenic matrix, we developed a process we term depolymerization etching of polymerization-induced microphase separations (DEPIMS). This approach enables highly selective and efficient domain removal via reversion to monomer to produce mesoporous materials with high surface areas (>200 m 2 /g). Subsequent surface functionalization yielded mesoporous adsorbents with tunable uptake kinetics and among the highest dye adsorption capacities reported for PIMS-derived materials, demonstrating the adaptability of the DEPIMS platform for chemical separations. DEPIMS can also be extended to a gram-scale, one-pot approach to yield mesoporous materials with recoverable monomer in under 12 h. These findings reposition thermal depolymerization from a sustainability tool to a broadly enabling strategy for scalable, on-demand fabrication of functional nanostructured materials.

Depolymerization↗

Monomeric [alpha]-Synuclein Binds Congo Red Micelles in a Disordered Manner

The histological dye Congo Red (CR) previously has been shown to inhibit {alpha}-synuclein (aS) fibrillation, but the mode of this inhibition remained unclear. Because of favorable exchange kinetics, interaction between CR and aS lends itself to a detailed nuclear magnetic resonance study, and relaxation dispersion measurements yield the bound fraction and time scales for the interaction of aS with CR. We find that at pH 6, CR exists as a micelle, and at a CR:aS molar ratio of {approx}1, only a small fraction of aS ({approx}2%) is bound to these micelles. Rapid exchange (k{sub ex} {approx} 3000 s{sup -1}) between the free and CR-bound states broadens and strongly attenuates resonances of aS by two processes: a magnetic field-dependent contribution, caused by the chemical shift difference between the two states, and a nearly field-independent contribution caused by slower tumbling of aS bound to the CR micelle. The salt dependence of the interaction suggests a predominantly electrostatic mechanism for the 60 N-terminal residues, while the weaker interaction between residues 61-100 and CR is mostly hydrophobic. Chemical shift and transferred NOE data indicate that aS becomes slightly more helical but remains largely disordered when bound to CR. Results indicate that inhibition of fibril formation does not result from binding of CR to free aS and, therefore, must result from interaction of aS fibrils or protofibrils with CR micelles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New F-18 Labeled PET Agent For Imaging Alzheimer's Plaques

Amyloid plaques and neurofibrillary tangles are hallmarks of Alzheimer's disease (AD). Advances in development of imaging agents have focused on targeting amyloid plaques. Notable success has been the development of C-11 labeled PIB (Pittsburgh Compound) and a number of studies have demonstrated the utility of this agent. However, the short half life of C-11 (t1/2: 20 min), is a limitation, thus has prompted the development of F-18 labeled agents. Most of these agents are derivatives of amyloid binding dyes; Congo red and Thioflavin. Some of these agents are in clinical trials with encouraging results. We have been exploring new class of agents based on 8-hydroxy quinoline, a weak metal chelator, targeting elevated levels of metals in plaques. Iodine-123 labeled clioquinol showed affinity for amyloid plaques however, it had limited brain uptake and was not successful in imaging in intact animals and humans. We have been successful in synthesizing F-18 labeled 8-hydroxy quinoline. Small animal PET/CT imaging studies with this agent showed high (7-10% ID/g), rapid brain uptake and fast washout of the agent from normal mice brains and delayed washout from transgenic Alzheimer's mice. These promising results encouraged us in further evaluation of this class of compounds for imaging AD plaques.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Near‐Unity Superradiant Emission from Delocalized Frenkel Excitons in a Two‐Dimensional Supramolecular Assembly

Abstract Three general effective strategies are shown to mitigate nonradiative losses in the superradiant emission from supramolecular assemblies. J‐aggregates of 5,5′,6,6′‐tetrachloro‐1,1′‐diethyl‐3,3′‐di(4–sulfobutyl)‐benzimidazolocarbocyanine (TDBC) are used to elucidate the nature of nonradiative processes. Self‐annealing at room temperature (RT), photo‐brightening, and purification of the dye monomers are shown to all lead to substantial increases in emission quantum yields (QYs) and a concomitant lengthening of the emission lifetime, with purification having the largest effect. Structural and optical measurements are used to support a microscopic model that emphasizes the deleterious effects of a small number of impurity and defect sites that serve as nonradiative recombination centers. This understanding has yielded a molecular fluorophore in solution at RT with an unprecedented combination of fast emissive lifetime and high QY. Superradiant emission with a QY of 82% and a lifetime of 174 ps is obtained from J‐aggregates of TDBC in solution at RT. This combination of high QY and fast lifetime at RT makes supramolecular assemblies of purified TDBC a model system for the study of fundamental superradiance phenomena. High QY J‐aggregates are uniquely suited for the development of applications that require high speed and high brightness fluorophores such as devices for high‐speed optical communication.

36 MATERIALS SCIENCE↗