Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DECELERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Atmospheric entry systems for advanced Mars missions

A study of estimates of the mass and performance characteristics of entry system designs for advanced Mars missions is presented. The missions were: (1) a Mars Surface Sample Return Mission (MSSR), (2) a Mars Hard Lander, and (3) a Mars Aircraft Mission, and Viking technology or its extensions were used for these entry system conceptual designs. For the MSSR mission, various mission combinations were evaluated including different Mars Ascent Vehicle masses and the use of 2 through 4 stages of the IUS launch vehicle. The constraints for this Mars mission were the Shuttle payload bay geometry limitation and its massive requirements. Requirements for the simple Hard Lander Mission including entry and deceleration, using a parachute and a solid rocket are discussed. A design requirement for the Mars Aircraft Mission to minimize the total entry capsule/aircraft mass by combining entry functions and hardware into the aircraft system was described, and various approaches for supporting the folded aircraft within the aeroshell were examined.

Butts, A. J.↗

Comparison of analytical and flight test identified aerodynamic derivatives for a tandem-rotor transport helicopter

Flight tests for verifying an analytical aerodynamic derivative model of a CH-47 helicopter were conducted for low cruise speeds and transition to hover portions of curved, decelerating landing approach trajectories. All testing was performed on a closed loop basis with the stability augmentation system of the helicopter operating, and response data were obtained using both manual and computer generated input maneuvers. The results indicate some differences between the measured response time histories and those predicted by both analytical and flight test identified derivatives. With some exceptions the discrepancies are not severe, and the overall agreement between the measured and computed time histories is reasonably good. No adverse effects attributable to closed loop testing were noted, and the use of computer generated inputs proved to be superior to manual ones.

Hodge, W. F.↗

Roadside tree/pole crash barrier field test

A series of tests was carried out to evaluate the performance of a crash barrier designed to protect the occupants of an automobile from serious injury. The JPL barrier design is a configuration of empty aluminum beverage cans contained in a tear-resistant bag which, in turn, is encased in a collapsible container made of plywood and steel. Tests were conducted with a driven vehicle impacting the barrier. The basic requirements of NCHRP Report 153 were followed except that speeds of 30 mph rather than 60 mph were used. Accelerometer readings on the driver's helmet showed that the driver was never subjected to dangerous decelerations, and never experienced more than temporary discomfort. Also, all of the requirements of the cited report were met. An extrapolation of data indicated that the JPL barrier installed in front of a tree or telephone pole along a roadside would also have met the requirements at a speed of 40 mph.

Wilson, A. H.↗

Early flight test experience with Cockpit Displayed Traffic Information (CDTI)

Coded symbology, based on the results of early human factors studies, was displayed on the electronic horizontal situation indicator and flight tested on an advanced research aircraft in order to subject the coded traffic symbology to a realistic flight environment and to assess its value by means of a direct comparison with simple, uncoded traffic symbology. The tests consisted of 28 curved, decelerating approaches, flown by research-pilot flight crews. The traffic scenarios involved both conflict-free and blunder situations. Subjective pilot commentary was obtained through the use of a questionnaire and extensive pilot debriefing sessions. The results of these debriefing sessions group conveniently under either of two categories: display factors or task performance. A major item under the display factor category was the problem of display clutter. The primary contributors to clutter were the use of large map-scale factors, the use of traffic data blocks, and the presentation of more than a few aircraft. In terms of task performance, the cockpit displayed traffic information was found to provide excellent overall situation awareness.

Abbott, T. S.↗

On the characteristics of centrifugal-reciprocating machines

A method of compressing helium gas for cryogenic coolers is presented which uses centrifugal force to reduce the forces on the connecting rod and crankshaft in the usual reciprocating compressor. This is achieved by rotating the piston-cylinder assembly at a speed sufficient for the centrifugal force on the piston to overcome the compressional force due to the working fluid. The rotating assembly is dynamically braked in order to recharge the working space with fluid. The intake stroke consists of decelerating the rotating piston-cylinder assembly and the exhaust stroke consists of accelerating the assembly.

Higa, W. H.↗

Static and transient performance of YF-102 engine with up to 14 percent core airbleed for the quiet short-haul research aircraft

An outdoor static test stand was used to measure the steady-state and transient performance of the YF-102 turbofan engine with core airbleed. The test configuration included a bellmouth inlet and a confluent-flow exhaust system similar in size to the quiet short-haul research aircraft (QSRA) exhaust system. For the steady-state tests, the engine operated satisfactorily with core bleed up to 14 percent of the core inlet flow. For the transient tests the engine accelerated and decelerated satisfactorily with no core bleed and with core bleed up to 11 percent of the core inlet flow (maximum tested). For some of the tests the core-bleed flow rate was scheduled to vary with fan discharge pressure, to simulate the QSRA bleed requirements. No stability, surge, stall, overtemperature, combustor flameout, or other operating problems were encountered in any of the tests. Steady-state and transient engine performance data are presented in graphs, and fuel-control trajectories for typical transient tests are shown.

Mcardle, J. G.↗

Spatial motion without material propulsion

The retrograde system of a space vehicle is described which permits motion in space without the projection of gas by rotor or jet engine. It is composed of masses, which accelerate, decelerate and guide the center of gravity in space in an ordered actuation. The invention may be used to replace rotors and jet engines of our present space vehicles. In space, it may use electrical solar energy and develop indefinitely in the solar system.

Fenioux, A.↗

Construction and testing of the 2.5m mass driver

Presented are the designs used in the construction of the 2.5 m mass driver and the results of the initial testing program. The mass driver consists of equal length sections of acceleration and deceleration each containing 59 drive coils of 13.1 cm caliber. Intermediate energy storage is provided by sector capacitors which are recharged every half cycle by an external power source. The drive coils are individually energized through SCR's with timing supplied by position sensing optical detectors. The drive consists of two phases which operate in quadrature. The initial bucket to be propelled through the mass driver contains two coils of aluminum wire chilled to liquid nitrogen temperatures to momentarily sustain superconducting field intensities. Magnetic flight is generated by eddy current repulsion from six copper guide strips lining the mass driver. Nominal acceleration is 5000 m/sec per sec giving a maximum bucket velocity of 112 m/s.

Snow, W. R.↗

Some influences of vision on susceptibility to motion sickness

Two experiments were performed to evaluate the influence of vision on susceptibility to motion sickness during exposure to constant patterns of vestibular stimulation. The motion profile involved accelerating subjects at 20 deg/sec per sec to 300 deg/sec, maintaining them at that constant velocity for 30 sec, and decelerating them to a rapid stop in about 1.5 sec. The number of stops tolerated by a subject before reaching the motion sickness endpoint served as his score. In Experiment 1, subjects were tested twice with their eyes open and twice with their eyes blindfolded. They tolerated fewer sudden stops when permitted sight of the experimental chamber. In Experiment 2, the effect of having the eyes open or closed at different stages of the motion profile was evaluated. Having the eyes open during any stage of the test was more stressful than having the eyes closed, but this was especially true during the sudden stops. The findings are discussed in terms of their general implications for understanding (1) situations in which vision alone elicits symptoms of motion sickness, and (2) situations involving vestibular stimulation where vision heightens susceptibility.

Lackner, J. R.↗

Scale covariance and G-varying cosmology. IV - The log N-log S relation

The traditional radio counts N(S) and radio source models are studied within the framework of the scale-covariant cosmology developed to investigate whether the relative strength of the gravitational and electromagnetic constants is a function of cosmological epoch. It is found that a gravitational constant G varying as the inverse of t, where t is the epoch in atomic units, is consistent with all the data analyzed. For a wide class of models the present cosmology allows a finer discrimination of the deceleration parameter than does standard theory. The results, when combined with those of previous papers, namely, those from radio and optical flux and angular-diameter data analysis, favor an open universe.

Canuto, V. M.↗

Atmospheric effects on Martian ejecta emplacement

The paper presents analytical descriptions of crater growth and numerical calculations of aerodynamic drag to evaluate the possible effects of drag on impact crater ejecta emplacement on Mars. The critical particle size below which ejecta deposition is restricted in range increases with crater size; models of ejecta trajectories in the current Martian atmosphere under hydrostatic equilibrium reveal critical particle diameters ranging from 0.4 to 20 cm, noting that ejecta approaching the critical particle size may impact with crater radius of the excavation crater rim. Ejecta larger than the critical particle size are undecelerated and form secondary impact craters modified by the later arriving decelerated ejecta cloud; thus, ejecta emplacement will be multiphased, but the process depends on the ejecta size distribution.

Schultz, P. H.↗

Case for an open universe

The determination of the geometrical structure of the universe through the magnitude-vs-redshift relation in standard cosmology has not been very successful, mainly because of the intrinsic insensitivity of the m-vs-z relation to a deceleration parameter, which determines the spatial curvature and therefore the geometry. By relaxing the assumption usually made, i.e., the identity of gravitational and atomic clocks, sufficient sensitivity is achieved. Existing observational evidence then leads one to conclude that the universe is open.

Canuto, V.↗

Stability aspects of diverging subsonic flow

The paper describes the computation of two-dimensional, subsonic, diverging internal flows and how they differ from the corresponding converging flows. Such diverging or decelerating flows occur in such obvious places as subsonic diffusers and inlets; however, such flows also occur in supersonic nozzles in the presence of a normal shock. The flow instability and its relation to the numerical method used, boundary conditions, and viscous effects are assessed both analytically and numerically. The inviscid flow is shown to be physically unstable and a poor representation of the true viscous flow.

Cline, M. C.↗

Shock acceleration of energetic particles in corotating interaction regions in the solar wind

A simple shock model for the acceleration of energetic particles in corotating interaction regions (CIRs) in the solar wind is presented. Particles are accelerated at the forward and reverse shocks which bound the CIR by being compressed between the shock fronts and magnetic irregularities upstream from the shocks, or by being compressed between upstream irregularities and those downstream from the shocks. Particles also suffer adiabatic deceleration in the expanding solar wind, an effect not included in previous shock models for acceleration in CIRs. The model is able to account for the observed exponential spectra at earth, the observed behavior of the spectra with radial distance, the observed radial gradients in the intensity, and the observed differences in the intensity and spectra at the forward and reverse shocks.

Fisk, L. A.↗

Thermophysical and system integration considerations in aerobraking design

The aerobraking concept for decelerating spacecraft into low-energy orbits is summarized. Data and comparisons are given for aerobraking approaches to Venus, Earth, Mars, and Titan. Calculations are based on adaption of a craft similar to the Venus Orbiting Imaging Radar vehicle to an aerobraking configuration. Special attention is given to integration of the aerobraking parts into the system and protection of the craft from heat loads due to the aerobraking maneuvers.

French, J. R.↗

Structures far from the head of comet Kohoutek. II - A discussion of the Swan Cloud of January 11 and of the general morphology of cometary plasma tails

Photographs show that the 'Swan Cloud' observed in comet Kohoutek on January 11, 1974 was an advanced stage of a plasma tail disconnection event, of which the rejected tail appeared to decelerate as it receded from the head. The event commenced with the development of strong tail ray activity followed by the actual tail disconnection, the merging of the disconnected tail with the new tail to form the Swan and the formation of arcade loops in the space between closing tail rays. The observed morphological sequence is easily understood in the sector boundary model (Niedner et al., 1978), and the arcade loops are proposed to be reconnected flux tubes between oppositely polarized tail rays in the incipient new tail which followed the disconnection

Niedner, M. B., Jr.↗

A study of stall deterrent systems for general aviation aircraft

Stall deterrent concepts for general aviation aircraft have been investigated using simulation studies and flight test experiments. It was found that the simulator was suitable for the development of deterrent system concepts, but the simulator was unacceptable for pilot evaluation of system effectiveness under typical stall/spin accident conditions. A Cessna 319 was outfitted with sensors, servoactuators, and analog control logic necessary to investigate a wide range of stall deterrent systems. It was found that an acoustic stall sensor and an error control law were sufficient for stall deterrence. The pitch intervention control system prevented aircraft stall for all aircraft configurations and pilot inputs. The variable up elevator stop concept was found to be effective for slow decelerations to aircraft stall. The stall deterrent systems were evaluated by four professional pilots and three low time pilots.

Bennett, A. G.↗

Deployment tests of a 36-element tetrahedral truss module

In the past, models of deployable structures were limited largely to small scale models which could be readily deployed by suspending the model on several soft shock cords. The scale of the deployable truss used in the present investigation precluded the use of this test technique as the gravity forces and moments are of the same order of magnitude as the deployment forces and moments. For these tests, the truss was deployed during free-fall in the LaRC 55' vacuum facility. Appreciably larger trusses could be deployed by lofting the packaged truss upward from the floor of the facility and allowing it to deploy during the upward as well as the downward portion of its trajectory, thus doubling the available test time. It must be realized, of course, that the mechanisms required to loft and decelerate such a large truss would be much more complex than those required for a straight drop.

Herr, R. W.↗