Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Stress-intensity factors for internal surface cracks in cylindrical pressure vessels

The stress intensity factors were calculated by a three dimensional finite element method. The finite element models employed singularity elements along the crack front and linear strain elements elsewhere. The models had about 6500 degrees of freedom. The stress intensity factors were evaluated from a nodal force method. An equation for the stress intensity factors was obtained form the results of the present analysis. The equation applies over a wide range of configuration parameters and was within about 5 percent of the present results. A comparison was made between the present results and other analyses of internal surface cracks in cylinders. The results from a boundary integral equation method were in agreement (+ or - 2 percent) and those from another finite element were in fair agreement (+ or - 8 percent) with the present results.

Newman, J. C., Jr.↗
NASA NTRS1979

Off-axis impact of unidirectional composites with cracks: Dynamic stress intensification

The dynamic response of unidirectional composites under off axis (angle loading) impact is analyzed by assuming that the composite contains an initial flaw in the matrix material. The analytical method utilizes Fourier transform for the space variable and Laplace transform for the time variable. The off axis impact is separated into two parts, one being symmetric and the other skew-symmetric with reference to the crack plane. Transient boundary conditions of normal and shear tractions are applied to a crack embedded in the matrix of the unidirectional composite. The two boundary conditions are solved independently and the results superimposed. Mathematically, these conditions reduce the problem to a system of dual integral equations which are solved in the Laplace transform plane for the transformation of the dynamic stress intensity factor. The time inversion is carried out numerically for various combinations of the material properties of the composite and the results are displayed graphically.

Sih, G. C.↗
NASA NTRS1978

Mode I analysis of a cracked circular disk subject to a couple and a force

Mode I stress intensity coefficients were obtained for an edge-cracked disk (round compact specimen). Results for this plane elastostatic problem, obtained by a boundary collocation analysis are presented for A/D ratios of 0.35 to 1, where A is the crack length and D is the disk diameter. The results presented are for two complementary types of loading. By superposition of these results the stress intensity factor for any practical load line location of a pin-loaded round compact specimen can be obtained.

Gross, B.↗
NASA NTRS1978

Recent developments in analysis of crack propagation and fracture of practical materials

Present U.S. Air Force and proposed U.S. civil airworthiness regulations are based on considerations of 'damage tolerance' in aircraft structures. Airworthiness is assured by demonstrating that damage that escapes one in a sequence of periodic inspections will not grow to critical size before the next inspection. The evaluations conducted employ fracture mechanics analyses. Problems arise because the features of fracture mechanics applications related to aircraft structures are more complex than the cases of fracture mechanics which have been mainly investigated. NASA has, therefore, conducted a variety of research tasks to extend the capabilities of fracture mechanics to deal with some of these complexities. The current stage of development of these capabilities is described. Attention is given to the limitations of linear elastic fracture mechanics, a two-parameter fracture criterion, aspects of fatigue crack propagation, and crack propagation and fracture in built-up structures.

Hardrath, H. F.↗
NASA NTRS1978

The displacement field associated with line forces in a cracked orthotropic body

An explicit result is presented for the two-dimensional Green function for an orthotropic body containing a crack along an orthotropic plane and with its tip in an orthotropic direction. A formal solution and a numerical program for its calculation are presented for a crack on a plane rotated about an orthotropic direction. The use of such Green functions to couple a finite element mesh to a surrounding elastic continuum, thereby shortening finite element calculations for composite bodies with macroscopic orthotropic symmetry, is discussed.

Gehlen, P. C.↗
NASA NTRS1979

Energy absorption mechanisms during crack propagation in metal matrix composites

The stress distributions around individual fibers in a unidirectional boron/aluminum composite material subjected to axial and transverse loadings are being studied utilizing a generalized plane strain finite element analysis. This micromechanics analysis was modified to permit the analysis of longitudinal sections, and also to incorporate crack initiation and propagation. The analysis fully models the elastoplastic response of the aluminum matrix, as well as temperature dependent material properties and thermal stress effects. The micromechanics analysis modifications are described, and numerical results are given for both longitudinal and transverse models loaded into the inelastic range, to first failure. Included are initially cracked fiber models.

Murphy, D. P.↗
NASA NTRS1979

Stress-intensity factors for two symmetric corner cracks

This paper presents stress-intensity factors, calculated by a three-dimensional finite-element analysis, for shallow or deep quarter-elliptical corner cracks at the edge of a hole in a finite-thickness plate. The plate was subjected to remote uniform tension, remote bending, or simulated pin loading in the hole; a wide range of configuration parameters was investigated. To verify the accuracy of the three-dimensional finite-element models employed, convergence was studied by varying the numbers of degrees of freedom. The stress-intensity factor variations along the crack front are compared with solutions from the literature.

Raju, I. S.↗
NASA NTRS1980

A mixed-mode crack analysis of isotropic solids using conservation laws of elasticity

A simple and convenient method of analysis for studying two-dimensional mixed-mode crack problems is presented. The analysis is formulated on the basis of conservation laws of elasticity and of fundamental relationships in fracture mechanics. The problem is reduced to the determination of mixed-mode stress-intensity factor solutions in terms of conservation integrals involving known auxiliary solutions. One of the salient features of the present analysis is that the stress-intensity solutions can be determined directly by using information extracted in the far field. Several examples with solutions available in the literature are solved to examine the accuracy and other characteristics of the current approach. This method is demonstrated to be superior in its numerical simplicity and computational efficiency to other approaches. Solutions of more complicated and practical engineering fracture problems dealing with the crack emanating from a circular hole are presented also to illustrate the capacity of this method

Yau, J. F.↗
NASA NTRS1980

Normal and shear impact of layered composite with a crack - Dynamic stress intensification

The dynamic response of a layered composite under normal and shear impact is analyzed by assuming that the composite contains an initial flaw in the matrix material. One of the objectives was to develop an analytical method for determining dynamic stress solutions which should lead to a numerical method which utilizes Fourier transform for the space variable and Laplace transform for the time variable. The time-dependent angle loading is separated into two parts: a symmetric and a skew-symmetric with reference to the crack plane. By superposition, the transient boundary conditions consist of applying normal and shear tractions to a crack embedded in a layered composite; one phase of the composite could represent the fiber while the other could be the matrix. Mathematically, these conditions reduce the problem to a system of dual integral equations solved in the transform plane for the transform of the dynamic stress-intensity factor.

Sih, G. C.↗
NASA NTRS1980

Effect of tangential traction and roughness on crack initiation/propagation during rolling contact

Rolling fatigue tests of 0.45 percent carbon steel rollers were carried out using a four roller type rolling contact fatigue tester. Tangential traction and surface roughness of the harder mating rollers were varied and their effect was studied. The results indicate that the fatigue life decreases when fraction is applied in the same direction as that of rolling. When the direction of fraction is reversed, the life increases over that obtained with zero traction. The roughness of harder mating roller also has a marked influence on life. The smoother the mating roller, the longer the life. Microscopic observation of specimens revealed that the initiation of cracks during the early stages of life is more strongly influenced by the surface roughness, while the propagation of these cracks in the latter stages is affected mainly by the tangential traction.

Soda, N.↗
NASA NTRS1980

Method for estimating crack-extension resistance curve from residual strength data

A method is presented for estimating the crack extension resistance curve (R curve) from residual strength (maximum load against initial crack length) data for precracked fracture specimens. The method allows additional information to be inferred from simple test results, and that information is used to estimate the failure loads of more complicated structures. Numerical differentiation of the residual strength data is required, and the problems that it may present are discussed.

Orange, T. W.↗
NASA NTRS1981

Effect of chloride contamination in MON-1 propellant on crack growth properties of metals

The effect of a high level of chloride content (800 ppm) in MON-1 propellant on the crack growth properties of seven materials was investigated. Sustained load tests were conducted at 49 C (120 F) temperature with thin gauge tensile specimens having a semi-elliptical surface flaw. Alloys included aluminum 1100, 3003, 5086 and 6061; corrosion resistant steel types A286 and 347; and titanium 6Al-4V. The configurations tested with precracked flaws exposed to MON-1 were: parent or base metal, center weld, and heat affected zone. It was concluded that this chloride level in MON-1 does not affect the stress corrosion, crack growth properties of these alloys after 1000 hour exposure duration under high stresses.

Moran, C. M.↗
NASA NTRS1982

Resistance of Some Steels to Stress Corrosion Cracking

Evaluations of stress-corrosion cracking resistance of five high-strength low-alloy steels described in report now available. Steels were heat-treated to various tensile strengths and found to be highly resistant to stress-corrosion cracking.

Humphries, T. S.↗
NASA NTRS1981

A root-mean-square approach for predicting fatigue crack growth under random loading

A method for predicting fatigue crack growth under random loading which employs the concept of Barsom (1976) is presented. In accordance with this method, the loading history for each specimen is analyzed to determine the root-mean-square maximum and minimum stresses, and the predictions are made by assuming the tests have been conducted under constant-amplitude loading at the root-mean-square maximum and minimum levels. The procedure requires a simple computer program and a desk-top computer. For the eleven predictions made, the ratios of the predicted lives to the test lives ranged from 2.13 to 0.82, which is a good result, considering that the normal scatter in the fatigue-crack-growth rates may range from a factor of two to four under identical loading conditions.

Hudson, C. M.↗
NASA NTRS1982

Molecular dynamics simulation of propagating cracks

Steady state crack propagation is investigated numerically using a model consisting of 236 free atoms in two (010) planes of bcc alpha iron. The continuum region is modeled using the finite element method with 175 nodes and 288 elements. The model shows clear (010) plane fracture to the edge of the discrete region at moderate loads. Analysis of the results obtained indicates that models of this type can provide realistic simulation of steady state crack propagation.

Mullins, M.↗
NASA NTRS1982

Crack displacements for J/I/ testing with compact specimens

The suggestion is made that the standard compact specimen (with opening displacement measured at the crack mouth) may be entirely suitable for J-integral determinations if a very simple conversion factor is used. Experimental determination of J-integral values requires the measurement of displacements at the points of load application. For the compact specimen this is a difficult task. On the basis of studies reported by Newman (1979) and Fisher and Buzzard (1980), it is suggested that for any J-based test the standard compact specimen can be used. A very good approximation to the load point displacement (within 3.4 percent) can be obtained by measuring the crack mouth displacement and multiplying by 0.773.

Orange, T. W.↗