Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computing, Lattice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Primitive quantum gates for dihedral gauge theories

We describe the simulation of dihedral gauge theories on digital quantum computers. The nonabelian discrete gauge group $D_N$-- the dihedral group -- serves as an approximation to $U(1)\times\mathbb{Z}_2$ lattice gauge theory. In order to carry out such a lattice simulation, we detail the construction of efficient quantum circuits to realize basic primitives including the nonabelian Fourier transform over $D_N$, the trace operation, and the group multiplication and inversion operations. For each case the required quantum resources scale linearly or as low-degree polynomials in $n=\log N$. We experimentally benchmark our gates on the Rigetti Aspen-9 quantum processor for the case of $D_4$. The fidelity of all $D_4$ gates was found to exceed $80\%$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Primitive quantum gates for an S U ( 3 ) discrete subgroup: Σ ( 36 × 3 )

We construct the primitive gate set for the digital quantum simulation of the 108-element Σ ( 36 × 3 ) group. This is the first time a non-Abelian crystal-like subgroup of S U ( 3 ) has been constructed for quantum simulation. The gauge link registers and necessary primitives—the inversion gate, the group multiplication gate, the trace gate, and the Σ ( 36 × 3 ) Fourier transform—are presented for both an eight-qubit encoding and a heterogeneous three-qutrit plus two-qubit register. For the latter, a specialized compiler was developed for decomposing arbitrary unitaries onto this architecture. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic transition behavior in epitaxial Fe 47 Rh 47 Pd 6 films

The properties of Fe–Rh–Pd epitaxial thin films grown on MgO(001) were studied as a function of growth temperature. Films grown above 400°C exhibit a first-order antiferromagnetic to ferromagnetic magnetic phase transition with a transition temperature that decreases as the growth temperature is increased. The chemical order parameter computed from the ratio of intensities of the (001) and (002) diffraction peaks is nearly independent of the growth temperature, while the lattice constants change slightly. A comparison of our structural, magnetic, and electrical transport results with first-principle-based calculations as well as literature results indicates that the transition temperature of Fe–Rh-based alloy films depends sensitively on the lattice parameters and is of electronic origin. The transition temperature and its width can be tuned over a wide range by controlling the crystal structure via growth conditions or postdeposition annealing.

36 MATERIALS SCIENCE↗

Structural and electronic properties of XSi{sub 2} (X = Cr, Mo, and W)

The structural and electronic properties of metal silicides XSi{sub 2} (X = Cr, Mo, and W), which crystallize in tetragonal structure, are investigated systematically using the first-principle density functional theory. The total energies are computed as a function of volume and fitted to the Birch equation of state. The ground-state properties such as equilibrium lattice constants a{sub 0} and c{sub 0}, bulk modulus B, its pressure derivative B, B′, and the density of states at the Fermi level, N(E{sub F}), are calculated and compared with other experimental and theoretical results, showing good agreement. The calculated band structure indicates that XSi{sub 2} compounds are semimetallic in nature. From the present study, we predict the structural and electronic properties of CrSi{sub 2} in the tetragonal phase and indicate that CrSi{sub 2} is energetically more stable than MoSi{sub 2} and WSi{sub 2}. Analyzing the bonding properties of the three metal silicides, we observe that WSi{sub 2} has a strong covalent bonding due to W 5d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing Kokkos with OpenACC

C++ template metaprogramming has emerged as a prominent approach for achieving performance portability in heterogeneous computing. Kokkos represents a notable paradigm in this domain, offering programmers a suite of high-level abstractions for generic programming while deferring much of the device-specific code generation and optimization to the compiler through template specializations. Kokkos furnishes a range of device-specific code specializations across multiple back ends, including CUDA and HIP. Diverging from conventional back ends, the OpenACC implementation presents a high-level, multicompiler, multidevice, and directive-based programming model. This paper presents recent advancements in the OpenACC back end for Kokkos (i.e., KokkACC) and focuses on its integration into the Kokkos ecosystem, exploration of automatic device selection capabilities to enhance productivity, and performance evaluation on modern hardware such as NVIDIA H100 GPUs. The study includes implementation details and a thorough performance assessment across various computational benchmarks, including minibenchmarks (AXPY and DOT product), miniapps (LULESH, MiniFE, and SNAP-LAMMPS), and a scientific kernel based on the lattice Boltzmann method.

Valero Lara, Pedro↗

Correlation functions of three-dimensional Yang-Mills theory from the FRG

We compute correlation functions of three-dimensional Landau-gauge Yang-Mills theory with the Functional Renormalisation Group. Starting from the classical action as only input, we calculate the non-perturbative ghost and gluon propagators as well as the momentum-dependent ghost-gluon, three-gluon, and four-gluon vertices in a comprehensive truncation scheme. Compared to the physical case of four spacetime dimensions, we need more sophisticated truncations due to significant contributions from non-classical tensor structures. In particular, we apply a special technique to compute the tadpole diagrams of the propagator equations, which captures also all perturbative two-loop effects, and compare our correlators with lattice and Dyson-Schwinger results.

Corell, Lukas↗

Neutron Tomography at the Los Alamos Neutron Science Center

Neutron imaging is an incredibly powerful tool for non-destructive sample characterization and materials science. Neutron tomography is one technique that results in a three-dimensional model of the sample, representing the interaction of the neutrons with the sample. This relies both on reliable data acquisition and on image processing after acquisition. Over the course of the project, the focus has changed from the former to the latter, culminating in a large-scale reconstruction of a meter-long fossilized skull. The full reconstruction is not yet complete, though tools have been developed to improve the speed and accuracy of the reconstruction. This project helps to improve the capabilities of LANSCE and LANL with regards to imaging large or unwieldy objects.

36 MATERIALS SCIENCE↗

Ab-initio vibrational properties of WTe2 and Li0.5WTe2

We present ab-initio calculations of the Td and 1T’ phases of WTe2 and the Td’ phase of Li 0.5 WTe 2 using density functional theory (DFT). These include lattice relaxations, total energy calculations, phonon calculations, and calculations of elastic constants. We also provide a detailed view of the transformation from Td to Td’ using a non-primitive representation of the Td lattice that more closely resembles the Td’ structure. The details presented here are intended as a supplement to a forthcoming experimental-computational paper on lithiated WTe 2 .

36 MATERIALS SCIENCE↗

Geometric modeling and analysis of large latticed surfaces

The application of geometrical schemes, similar to geodesic domes, to large spherical antenna reflectors was investigated. The shape and size of flat segmented latticed surfaces which approximate general shells of revolution, and in particular spherical and paraboloidal reflective surfaces, were determined. The extensive mathematical and computational geometric analyses of the reflector resulted in the development of a general purpose computer program capable of generating the complete design parameters of the dish. The program also includes a graphical self contained subroutine for graphic display of the required design.

Nayfeh, A. H.↗

A Model for Backscattering from Quasi Periodic Corn Canopies at L-Band

In this study, a model for backscattering at L-band from a corn canopy is proposed. The canopy consists of a quasi-periodic distribution of stalks and a random distribution of leaves. The Distorted Born Approximation (DBA) is employed to calculate the single scattered return from the corn field. The new feature of the method is that the coherence of the stalks in the row direction is incorporated in the model in a systematic fashion. Since the wavelength is on the order of the distance between corn stalks in a row, grating lobe behavior is observed at certain azimuth angles of incidence. The results are compared with experimental values measured in Huntsville, Alabama in 1998. The mean field and the effective dielectric constant of the canopy are obtained by using the Foldy approximation. The stalks are placed in the effective medium in a two dimensional lattice to simulate the row structure of a corn field. In order to mimic a real corn field, a quasi-periodic stalk distribution is assumed where the stalks are given small random perturbations about their lattice locations. Corn leaves are also embedded in the effective medium and the backscattered field from the stalks and the leaves is computed. The backscattering coefficient is calculated and averaged over successive stalk position perturbations. It is assumed that soil erosion has smoothed the soil sufficiently so that it can be assumed flat. Corn field backscatter data was collected from cornfields during the Huntsville 98 experimental campaign held at Alabama A&M University Research Station, Huntsville, Alabama in 1998 using the NASA/GW truck mounted radar. Extensive ground truth data was collected. This included soil moisture measurements and corn plant architectural data to be used in the model. In particular, the distances between the stalks in a single row have been measured. The L-band radar backscatter data was collected for both H and V polarizations and for look angles of 15o and 45o over a two week period under varying soil moisture conditions. These measured backscattering values will be compared with the model backscattering values and a discussion of the results will be presented.

Lang, R.↗

B{yields}D*l{nu} form factor at zero recoil from three-flavor lattice QCD: A model independent determination of |V{sub cb}|

We present the first lattice QCD calculation of the form factor for B{yields}D*l{nu} with three flavors of sea quarks. We use an improved staggered action for the light valence and sea quarks (the MILC configurations), and the Fermilab action for the heavy quarks. The form factor is computed at zero recoil using a new double ratio method that yields the form factor more directly than the previous Fermilab method. Other improvements over the previous calculation include the use of much lighter light-quark masses, and the use of lattice (staggered) chiral perturbation theory in order to control the light-quark discretization errors and chiral extrapolation. We obtain for the form factor, F{sub B{yields}}{sub D*}(1)=0.921(13)(20), where the first error is statistical and the second is the sum of all systematic errors in quadrature. Applying a 0.7% electromagnetic correction and taking the latest PDG average for F{sub B{yields}}{sub D*}(1)|V{sub cb}| leads to |V{sub cb}|=(38.7{+-}0.9{sub exp}{+-}1.0{sub theo})x10{sup -3}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Local lattice distortions drive the transition of BaIrO 3 into a ferromagnetic insulator state

Using variable temperature total and resonant x-ray scattering at the K edge of Ir species, we study the “bad metal” to insulator transition in BaIrO 3 , a canonical third transition series oxide. The usage of advanced experimental techniques and large-scale computer modeling helps us show that, contrary to the widely accepted view, charge disproportionation leading to the formation of Ir-trimers with a different number of 5d valence electrons already exists at room temperature. The charge disbalance between the trimers does not evolve much with decreasing temperature while local lattice distortions do, suggesting that the latter and not the former make a key contribution to the emergence of the enigmatic ferromagnetic insulator state of BaIrO 3 . The conclusion is supported by DFT calculations based on unmodified experimental structure data. Our work calls for a reconsideration of the role of lattice distortions in determining the electronic properties of third transition series oxides. It also charts a path to assessing these properties on a realistic and not assumed crystal structure basis.

36 MATERIALS SCIENCE↗

Programmable Phase Selection between Altermagnetic and Noncentrosymmetric Polymorphs of MnTe on InP via Molecular Beam Epitaxy

This dataset contains DFT input and output files supporting the theoretical modeling in the associated publication (ACS Appl. Mater. Interfaces 2026, 18, 15654-15664). The calculations model the interfacial energetics of two MnTe polymorphs — NiAs-MnTe (hexagonal, alpha phase) and ZnS-MnTe (cubic, gamma phase) — on InP(111) substrates with two surface terminations: In-terminated InP(111)A and P-terminated InP(111)B. This gives four interface configurations: NiAs on In-terminated (experimentally observed), NiAs on P-terminated (computed for comparison), ZnS on In-terminated (computed for comparison), and ZnS on P-terminated (experimentally observed). The dataset is organized into four calculation types, each covering all four polymorph/termination combinations: (i) Slabs: Pristine MnTe/InP heterostructure slabs used to compute total energies and interface energy densities (Eint) for all four configurations, as reported in Fig. 6 of the main text. (ii) Disorder: Same slab geometries with a P_Te + Te_P antisite defect pair introduced near the interface, used to assess chemical intermixing effects on interface stability (Fig. S8, SI). (iii) Strain: Pristine slab calculations with in-plane lattice parameters strained by -1% and +1% relative to the InP lattice constant, used to evaluate strain-dependent interface energetics (Fig. S9, SI). (iv) Charge_Density: Single-point calculations on the full heterostructure, the isolated InP slab, and the isolated MnTe slab at fixed geometry, used to compute differential charge density plots showing interfacial charge accumulation and depletion as a function of surface termination (Fig. S10, SI). Each calculation folder contains INCAR, KPOINTS, POSCAR, CONTCAR, OUTCAR, and POTCAR_info.txt (PAW potential information, excluding the full POTCAR due to VASP licensing restrictions). The calculations were performed using VASP 6.4.3 with PBE exchange-correlation, PAW potentials, a Hubbard correction of Ueff = 5 eV on Mn d-states, and A-type AFM spin initialization.

36 MATERIALS SCIENCE↗

Phase transitions in a gas of anyons

We continue our numerical Monte Carlo simulation of a gas of closed loops on a 3 dimensional lattice, however, now in the presence of a topological term added to the action which corresponds to the total linking number between the loops. We compute the linking number using a novel approach employing certain notions from knot theory. Adding the topological term converts the particles into anyons. Interpreting the model as an effective theory that describes the 2+1-dimensional Abelian Higgs model in the asymptotic strong-coupling regime, the topological linking number simply corresponds to the addition to the action of the Chern-Simons term. The system continues to exhibit a phase transition as a function of the vortex mass as it becomes small. We find the following new results. The Chern-Simons term has no effect on the Wilson loop. On the other hand, it does effect the 't Hooft loop of a given configuration, adding the linking number of the 't Hooft loop with all of the dynamical vortex loops. We find the unexpected result that both the Wilson loop and the 't Hooft loop exhibit a perimeter law even though there are no massless particles in the theory, in both phases of the theory. It should be noted that our method suffers from numerical instabilities if the coefficient of the Chern-Simons term is too large; thus, we have restricted our results to small values of this parameter. Furthermore, interpreting the lattice loop gas as an effective theory describing the Abelian Higgs model is only known to be true in the infinite coupling limit; for strong but finite coupling this correspondence is only a conjecture, the validity of which is beyond the scope of this article.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computation of graphene elastic moduli at low temperature

Finding the values of parameters for the simplest Mie’s family potentials is performed in order to estimate elastic moduli of graphene monolayers using lattice statics approach. The coincidence criterion of the experimentally determined Poisson’s ratio with the estimated value is taken in order to select dimensionless power parameters of the Mie-type potential. It allowed obtaining more precise estimation of elastic properties in comparison with variety of other potentials for carbon atoms in graphene monolayer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Kinetic Monte Carlo Model of Scintillation Mechanisms in CsI and CsI(Tl)

We have developed a computational model of energy transfer processes in scintillators using the kinetic Monte Carlo (KMC) approach. In this publication, we focus on the alkali halide compound CsI both pure and doped with a range of thallium concentrations. The KMC model makes use of an explicit atomistic representation of the crystal lattice, activator sites, defect sites, and individual electron-hole pairs. The probability of individual diffusion, recombination, and scintillation events is calculated from rate equations parameterized with data published in the literature. Scintillation decay curves, relative intensities of emission peaks, and light yields are computed and found to be in good agreement with experimental data for a range of temperatures and thallium concentrations. This demonstrates that the KMC scintillation model is capable of reproducing both the kinetics and the efficiency of the scintillation process in CsI. In addition, novel predictions emerge from our simulations such as the diffusion distance distributions of self-trapped holes and excitons. Finally, the KMC scintillation model provides a framework for probing possible physical processes responsible for the nonlinear relationship between scintillation light yield and incident gamma-ray energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗