Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composition B”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Microstructure homogenization of concrete used in nuclear power plants

Almost all nuclear power plants in the United States are operating past their intended lifetimes or are requesting lifetime extensions. Therefore, understanding changes to the concrete containment structure over time is crucial to evaluate the structure’s continued viability. Concrete materials are heterogeneous particulate composites that exhibit viscoelastic material properties, which can lead to slow deformation over time, causing stress redistribution and the potential for creep cracking. A code to generate random, three dimensional (3D) concrete microstructures has been developed and paired with finite element analysis to predict the long-term viscoelastic properties of concrete. Data from these simulations are used to develop constitutive equations for the viscoelastic behavior of the homogenized concrete. The codes in this work are used to virtualize laboratory experiments, to obtain long-term creep data in a faster, cheaper manner. To validate this work, the simulated creep behavior of concrete is compared to 800 d of experimental data that has been extended to 27 y of data using the Time-Temperature superposition (TTS) principal. Excellent agreement between the simulation results and experimental data is seen.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Climate warming and elevated CO 2 alter peatland soil carbon sources and stability

Peatlands are an important carbon (C) reservoir storing one-third of global soil organic carbon (SOC), but little is known about the fate of these C stocks under climate change. Here, we examine the impact of warming and elevated atmospheric CO 2 concentration (eCO 2 ) on the molecular composition of SOC to infer SOC sources (microbe-, plant- and fire-derived) and stability in a boreal peatland. We show that while warming alone decreased plant- and microbe-derived SOC due to enhanced decomposition, warming combined with eCO 2 increased plant-derived SOC compounds. We further observed increasing root-derived inputs (suberin) and declining leaf/needle-derived inputs (cutin) into SOC under warming and eCO 2 . The decline in SOC compounds with warming and gains from new root-derived C under eCO 2 , suggest that warming and eCO 2 may shift peatland C budget towards pools with faster turnover. Together, our results indicate that climate change may increase inputs and enhance decomposition of SOC potentially destabilising C storage in peatlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Data-driven precision determination of the material budget in ALICE

The knowledge of the material budget with a high precision is fundamental for measurements of direct photon production using the photon conversion method due to its direct impact on the total systematic uncertainty. Moreover, it influences many aspects of the charged-particle reconstruction performance. In this article, two procedures to determine data-driven corrections to the material-budget description in ALICE simulation software are developed. One is based on the precise knowledge of the gas composition in the Time Projection Chamber. The other is based on the robustness of the ratio between the produced number of photons and charged particles, to a large extent due to the approximate isospin symmetry in the number of produced neutral and charged pions. Both methods are applied to ALICE data allowing for a reduction of the overall material budget systematic uncertainty from 4.5% down to 2.5%. Using these methods, a locally correct material budget is also achieved. The two proposed methods are generic and can be applied to any experiment in a similar fashion.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Multimetallic Metal-Organic Frameworks as Heterogeneous Catalysts for Gas Phase Hydroformylation and Hydrogenation Reactions

This project focused on the development bimetallic metal-organic frameworks (MOFs) as gas phase heterogeneous catalysts for hydrogenation and hydroformylation reactions. MOFs are a new class of hybrid inorganic/organic materials that are highly crystalline, with structures consisting of metal nodes of specific geometries connected by organic linkers. Although there have been a number of studies of catalysis at MOF nodes in solution, there is little experimental data in the literature for gas phase reactions despite the fact that industrial heterogeneous catalysis on MOFs is more economically viable than homogeneous catalysis. The use of MOFs as heterogeneous catalysts presents the unique opportunity to carefully control the composition, geometry and ensemble sizes of the active sites, which are all critical factors for the rational design of new catalysts. Specific objectives of the project are as follows: (1) to tailor the geometry, composition and ensemble size of the active sites; (2) to understand how the adsorption of molecules at metal sites can be modified by interactions with a neighboring metal site; (3) to determine how oxidation states of the metal change during reaction and how these states can be modified by metal-metal electronic interactions; and (4) to elucidate reaction mechanisms and intermediates. For these studies, we have chosen to investigate selective hydrogenation of hydrocarbons and hydroformylation, which are industrially relevant reactions. Our interdisciplinary team of Chen, Shustova and Vogiatzis/Henkelman provides critical expertise in novel MOF synthesis (Shustova), atomic-scale surface science and catalysis (Chen) and computational studies of reaction mechanisms (Vogiatzis/Henkelman) that are necessary for the development of these catalysts. We believe that this work will lead directly to the rational design of new catalysts that are versatile, highly active/selective and suitable for industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mechanical and chemical properties of PVD and cold spray Cr-coatings on Zircaloy-4

In this paper, accident-tolerant fuel (ATF) cladding materials aim to improve fuel reliability and safety during accident scenarios in water-cooled reactors. These ATF cladding should also perform comparable or better than the current zirconium alloy cladding under reactor normal operating conditions. Surface-modified Zircaloy-4 was produced by depositing a protective coating of chromium by two different coating techniques, Physical Vapor Deposition (PVD) and Cold Spray (CS). The coating thickness, structure, composition, and mechanical properties of the coated Zircaloy were assessed with advanced materials characterization techniques. Results showed a strengthening effect of the Cr-coating, along with ~83% higher hardness compared to that of the Zircaloy-4 substrate. Surface topography and surface chemistry of the Cr-coated Zircaloy-4 were assessed with contact profilometry, atomic force microscopy, contact angle goniometry, and X-ray photoelectron spectroscopy. Deposited Cr-coating significantly improved surface wettability compared to the substrate Zircaloy-4. The formation of surface oxides on the coatings by prolonged exposure to ambient air showed a further increase in the hydrophobic behavior. Surface parameters and surface chemistry after flow boiling critical heat flux tests, conducted at atmospheric pressure, evidenced a slight increase in surface roughness with notable changes in wettability associated with the formation of surface oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Single-Step Direct Laser Writing of Multimetal Oxygen Evolution Catalysts from Liquid Precursors

We investigate a laser direct-write method to synthesize and deposit metastable, mixed transition metal oxides and evaluate their performance as oxygen evolution reaction catalysts. This laser processing method enabled the rapid synthesis of diverse heterogeneous alloy and oxide catalysts directly from cost-effective solution precursors, including catalysts with a high density of nanocrystalline metal alloy inclusions within an amorphous oxide matrix. The nanoscale heterogenous structures of the synthesized catalysts were consistent with reactive force-field Monte Carlo calculations. By evaluating the impact of varying transition metal oxide composition ratios, we created a stable Fe 0.63 Co 0.19 Ni 0.18 O x /C catalyst with a Tafel slope of 38.23 mV dec -1 and overpotential of 247 mV, a performance similar to that of IrO 2 . Synthesized Fe 0.63 Co 0.19 Ni 0.18 O x /C and Fe 0.14 Co 0.46 Ni 0.40 O x /C catalysts were experimentally compared in terms of catalytic performance and structural characteristics to determine that higher iron content and a less crystalline structure in the secondary matrix decreases the charge transfer resistance and thus is beneficial for electrocatalytic activity. Furthermore, this conclusion is supported by density-functional theory calculations showing distorted active sites in ternary metal catalysts are key for lowering overpotentials for the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Antiprotons and Elementary Particles over a Solar Cycle: Results from the Alpha Magnetic Spectrometer

We present results over an 11-year Solar cycle of cosmic antiprotons based on 1.1 × 10 6 events in the rigidity range from 1.00 to 41.9 GV. The $\bar{𝑝}$ fluxes exhibit distinct properties. The magnitude of the $\bar{𝑝}$ flux temporal variation is significantly smaller than those of 𝑝, 𝑒 − , and 𝑒 + . A hysteresis between the $\bar{𝑝}$ fluxes and the 𝑝 fluxes is observed, whereas the $\bar{𝑝}$ and 𝑒 − fluxes show a linear correlation. With a model-independent analysis, we found a universal relation between the shape of the rigidity spectrum and the magnitude of flux temporal variation over an 11-year Solar cycle for both positively and negatively charged particles. The simultaneous results on $\bar{𝑝}$ and 𝑝, 𝑒 − , and 𝑒 + provide unique information for understanding particle transport in the Solar System as a function of mass, charge, and spectral shape.

cosmic ray composition & spectra↗
DOE OSTI2024

Manuscript Workflows from and Processed Organic Matter Composition of Experimentally Burned Open Air and Muffle Furnace Vegetation Chars across Differing Burn Severity and Feedstock Types from Pacific Northwest, USA (v3)

This dataset includes processed organic matter chemistry data from an experimental study designed to compare how the chemical composition of organic matter changes across different burn conditions and vegetation materials representative of major land cover types of the Pacific Northwest, USA. Chars were created in a closed muffle furnace or on an open burn table from four different feedstock species representing vegetation commonly impacted by fire regimes across the Pacific Northwest, USA. Source data and associated metadata (including methods and geospatial information) can be found at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1894135 (Grieger et al. 2022). This dataset provides processing scripts and processed data for both solid and dissolved phase organic matter characterization data from experimentally generated chars. These processed data can be used to compare how different burn conditions may influence resultant organic matter chemistry and help further our understanding of potential biogeochemical impacts on river corridors post-fire. The processed data were subsequently analyzed; and the results and ecological implications of the findings were published in peer-reviewed manuscripts. The scripts and workflows used to develop the manuscripts are also included in this data package.This data package was originally published June 2024. It was updated September 2024 (new and modified files) and in January 2025 (modified files). See the change history section in the readme for more details.This dataset is comprised of one data package readme, one data dictionary (dd), one file level metadata (flmd), and folders containing (A) processed data; (B) general processing scripts; and (C) additional folders with specific manuscript analysis scripts and processed data. Step-by-step instructions to assist the user in recreating the workflow used to generate the results in the manuscripts is also provided. The processed data folder includes (1) a folder of processed Parallel Factor Analysis (PARAFAC) and spectra indices outputs from excitation emissions matrix (EEM) fluorescence and absorbance data; (2) a folder of processed solid state carbon-13 (13-C NMR) integrals; (3) folder of high resolution characterization of organic matter via 21 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) generated through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory) processed data outputs from Formultitude (https://github.com/PNNL-Comp-Mass-Spec/Formultitude), blank corrections and data aggregation, and calculated molecular indices. All files are .pdf, .csv, .html, .Rmd, .R, or .RData.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

High-Performance Pt–Co Nanoframes for Fuel-Cell Electrocatalysis

Pt-based alloy catalysts are promising candidates for fuel-cell applications, especially for cathodic oxygen reduction reaction (ORR) and anodic methanol oxidation reaction (MOR). The rational design of composition and morphology is crucial to promoting catalytic performances. Here, we report the synthesis of Pt–Co nanoframes via chemical etching of Co from solid rhombic dodecahedra. The obtained Pt–Co nanoframes exhibit excellent ORR mass activity in acidic electrolyte, which is as high as 0.40 A mg Pt –1 initially and 0.34 A mg Pt –1 after 10 000 potential cycles at 0.95 V RHE . Furthermore, their MOR mass activity in alkaline media is up to 4.28 A mg Pt –1 and is 4-fold higher than that of commercial Pt/C catalyst. Furthermore, experimental studies indicate that the weakened binding of intermediate carbonaceous poison contributes to the enhanced MOR behavior. More impressively, the Pt–Co nanoframes also demonstrate remarkable stability under long-term testing, which could be attributed to the negligible electrochemical Co dissolution.

25 ENERGY STORAGE↗
DOE OSTI2022

Processing and properties of PSZT 95/5 ceramics with varying Ti and Nb substitution

Niobium doped lead-tin-zirconate-titanate ceramics near the PZT 95/5 orthorhombic AFE – rhombohedral FE morphotropic phase boundary Pb 1-0.5y (Zr 0.865-x Ti x Sn 0.135 ) 1-y Nb y O 3 were prepared according to a 2 2+1 factorial design with x = 0.05, 0.07 and y = 0.0155, 0.0195. The ceramics were prepared by a traditional solid-state synthesis route and sintered to near full density at 1250°C for 6 hours. All compositions were ~98% dense with no detectable secondary phases by XRD. The ceramics exhibited equiaxed grains with intergranular porosity and grain size was ~5 μm, decreasing with niobium substitution. Compositions exhibited remnant polarization values of ~32 μC/cm 2 , increasing with Ti substitution. Depolarization by the hydrostatic pressure induced FE-AFE phase transition was drastically affected by variation of the Ti and Nb substitution, increasing at a rate of 113 MPa / 1% Ti and 21 MPa / 1% Nb. Total depolarization output was insensitive to the change in Ti and Nb substitution, ~32.8 μC/cm 2 for the PSZT ceramics. The R3c-R3m and R3m-Pm3m phase transition temperatures on heating ranged from 90 to 105°C and 183 to 191°C, respectively. Ti substitution stabilized the R3c and R3m phases to higher temperatures, while Nb substitution stabilized the Pm3m phase to lower temperatures. Thermal hysteresis of the phase transitions was also observed in the ceramics, with transition temperature on cooling being as much as 10°C lower.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy

Alloys with ultra-high strength and sufficient ductility are highly desired for modern engineering applications but difficult to develop. Here we report that, by a careful controlling alloy composition, thermomechanical process, and microstructural feature, a Co-Cr-Ni-based medium-entropy alloy (MEA) with a dual heterogeneous structure of both matrix and precipitates can be designed to provide an ultra-high tensile strength of 2.2 GPa and uniform elongation of 13% at ambient temperature, properties that are much improved over their counterparts without the heterogeneous structure. Electron microscopy characterizations reveal that the dual heterogeneous structures are composed of a heterogeneous matrix with both coarse grains (10~30 μm) and ultra-fine grains (0.5~2 μm), together with heterogeneous L1 2 -structured nanoprecipitates ranging from several to hundreds of nanometers. The heterogeneous L1 2 nanoprecipitates are fully coherent with the matrix, minimizing the elastic misfit strain of interfaces, relieving the stress concentration during deformation, and playing an active role in enhanced ductility.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Zooplankton International Geospatial dataset: A global repository of spatiotemporal freshwater zooplankton community composition data from lakes and reservoirs to support ecological research

Zooplankton transfer substantial energy in aquatic food webs and are used as indicators of environmental change. Syntheses of zooplankton community dynamics globally require datasets that span a wide range of environmental gradients; however, these datasets are limited due to methodological differences across programs, taxonomic inconsistencies, and a lack of standardized metadata. To reconcile these challenges, we created the Zooplankton International Geospatial (ZIG) dataset, which includes original zooplankton, water physical and chemical variables, and lake morphometric data from 311 inland lakes and reservoirs. ZIG includes waterbodies ranging in size from 0.005 to 82,100 km2 and spanning broad latitudinal (−47.26 to 64.90) and longitudinal ranges (−165.04 to 176.53). Temporal coverage for individual waterbodies ranges between 1 and 60 yr with sampling frequency ranging from annually to weekly. With its extensive coverage and content, we consider ZIG to be a cornerstone for future investigations of global scale lake biodiversity change.

Figary, Stephanie [Cornell University, Ithaca, NY]↗
DOE OSTI2025

Thermodynamic modeling of countercurrent chemical looping reverse water gas shift process for redox material screening

The reverse water gas shift (RWGS) reaction is a key pathway for CO 2 utilization, particularly within Power-to-X process chains aimed at sustainable fuel and chemical production. Countercurrent chemical looping (CL-RWGS) using non-stoichiometric oxides can overcome equilibrium limitations of conventional RWGS reactors, enabling significantly higher CO 2 conversions. However, modeling the limiting performance of such systems is challenging due to their multiphase nature and coupled spatial and temporal variation in chemical composition. In this work, we present a discretized batch equilibrium model that simulates CL-RWGS reactors as a series of localized equilibrium exchanges between gas and solid elements. The model is numerically stable, computationally efficient, and free of kinetic source terms, making it well-suited for parametric studies and system-level integration. It is validated against established convection–diffusion models and shown to predict reasonable upper bounds on experimental results. Application of the model to a range of oxygen carrier materials identifies cerium–zirconium solid solutions, particularly Ce 0.80 Zr 0.20 O 2 , as a promising class offering superior oxygen storage characteristics compared to state-of-the-art La 0.6 Sr 0.4 FeO 3 . This framework provides a robust platform for materials screening, reactor sizing, and performance optimization in chemical looping systems. The model implementation is available as open-source software to support further research and development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Morphological and chemical characteristics of oxide scales formed on δ-phase plutonium metal alloys II: 2.0 at% Ga

The focused ion-beam scanning electron microscopy (FIB-SEM) and three-dimensional (3D) microscopy were applied to characterize the subsurface morphological features of oxide scales formed on an ~2.0 at. % Ga plutonium (Pu) metal alloy. Using the FIB-SEM technique, a number of morphological features formed in the interior of the oxide scale from Pu metal’s environmental exposure were observed and identified. Auger electron spectroscopy (AES) was utilized to characterize the cross-sectional composition and chemistry of the oxide scale. The oxide scale formed during inert storage and operational environments was found to be highly variable in thickness and morphology, presenting some regions with a thin (<400 nm), dense oxide layer and others with a thick (>2 µm) scale with substantial lateral cracking. After subsequent exposure to dry air environment, the oxide scale became thicker (~4 µm) and slightly more porous. The changes following aging in a moist air environment were observed to be more severe, with the formation of a highly porous internal structure containing significant lateral and transverse cracking. In comparison to the scale formed on an ~3.5 at. % Ga-Pu metal alloy, the oxide morphology of the lower gallium alloy investigated here exhibited greater variation in thickness and a noteworthy dependence on the presence of water vapor, particularly in terms of the internal porosity formed during growth of the oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Localized High Concentration Electrolytes for High Voltage Lithium-Metal Batteries: Correlation between the Electrolyte Composition and Its Reductive/Oxidative Stability

We demonstrate a first-principles screening methodology as an effective tool to explore electrolyte formulations for the new generation of high energy density rechargeable batteries. We study the liquid structure and electronic properties in dilute electrolytes, high concentration electrolytes (HCE), and localized high concentration electrolytes (LHCE), with focus on electrolyte formulations based on lithium bis(fluorosulfonyl)imide (LiFSI), dimethyl carbonate (DMC), and bis(2,2,2-trifluoroethyl) ether (BTFE) as a diluent. We describe the solvation complexes in the dilute electrolyte and explore structural changes triggered by the increase in lithium salt concentration for HCEs and the diluent effects in LHCEs. In HCE formulations, there is a 4-fold coordination environment of lithium-ions as in the dilute electrolyte, but the number of lithium-ion interactions with O atoms from FSI- anions dominates. In these solutions, the ability of the FSI- anions to interact with multiple lithium-ions allows complex 3D network formation and influences the reductive/oxidative behavior of the electrolyte. Interestingly, in LHCEs, the BTFE diluent molecules do not change the 3D solution structure when diluting the HCE formulation from 5.49 to 3.83 M. However, there is a composition threshold where the structural and electronic behavior may change. We show that diluting the HCE electrolyte with BTFE down to 1.77 M breaks the three-dimensional solution structure into an island-like solvation complex. We relate these structural changes to the electronic properties of the electrolytes finding a causal relationship between the reductive/oxidative behavior and the lithium-oxygen interaction mechanisms in the solvated complexes. The coordination with lithium-ions lowers the electrolyte LUMO and HOMO levels: the higher is the number of interactions with lithium-ions, the more likely the solvent molecule, FSI- anion, or diluent molecule is to be reduced and the less likely it is to become oxidized. The evolution of the solvated ion structure in HCE and LHCE suggests a close connection to a corresponding change in the lithium-ion transport mechanisms for these electrolytes.

anions, molecules, oxygen, solvents, electrolytes↗
DOE OSTI2020

Inference of principal species in caustic aluminate solutions through solid-state spectroscopic characterization

Tetrahedrally coordinated aluminate Al(OH) 4 – and dialuminate Al 2 O(OH) 6 2– anions are considered to be major species in aluminum-rich alkaline solutions. However, their relative abundance remains difficult to spectroscopically quantify due to local structure similarities and poorly understood effects arising from extent of polymerization and counter-cations. To help unravel these relationships in this paper we report detailed characterization of three solid-phase analogues as structurally and compositionally well-defined reference materials. We successfully synthesized a cesium salt of the aluminate monomer, CsAl(OH) 4 ·2H 2 O, for comparison to potassium and rubidium salts of the aluminate dimer, K 2 Al 2 O(OH) 6 , and Rb 2 Al 2 O(OH) 6 , respectively. Single crystal and powder X-ray diffraction methods clearly reveal the structure and purity of these materials for which a combination of 27 Al MAS-NMR, Al K-edge X-ray absorption and Raman/IR spectroscopies was then used to fingerprint the two major tetrahedrally coordinated Al species. The resulting insights into the effect of Al–O–Al bridge formation between aluminate tetrahedra on spectroscopic features may also be generalized to the many materials that are based on this motif.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The importance of nutrients for microbial priming in a bog rhizosphere

Wetlands host anaerobic microbes which convert organic carbon into methane (CH 4 ), a powerful greenhouse gas. Wetland plants can influence which carbon compounds are available for microbial processing by exuding freshly fixed carbon from their roots. Notably, exudation of carbon from plant roots can trigger microbial priming: the process of new carbon stimulating the microbial community into processing more soil carbon than they otherwise would have. This study utilized high resolution Fourier transform ion cyclotron mass spectrometry (FT-ICR-MS) analysis to probe the chemical composition of soil organic compounds from the rhizosphere of Carex aquatillis, a common wetland sedge, which is known to have stimulated microbial priming within a peat soil. The goal was to identify what types of molecules are created or lost during microbial priming in the wetland rhizosphere and thus advance mechanistic understanding of the process. FT-ICR-MS analysis demonstrated that more microbial transformations of carbon occurred among water-soluble compounds than among hydrophobic compounds, but that some hydrophobic compounds were processed as well. Crucially for understanding microbial priming, the root exudates triggered increased processing of high molecular weight molecules regardless of nutrient content but processed low molecular weight compounds only if they contained essential nutrients. Furthermore, the pattern of which molecules are processed and which are not is evidence for a selective priming effect in which some types of carbon compounds are used at an increased rate, while others are not.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Contribution of Speciated Monoterpenes to Secondary Aerosol in the Eastern North Atlantic

Extension of laboratory results suggests that monoterpenes, a subset of marine biogenic volatile organic compounds, might play a competitive role in secondary aerosol formation in the remote marine atmosphere, where the oxidation of dimethyl sulfide has traditionally been thought to dominate. However, the current assessment of the role of monoterpenes in secondary aerosol formation in the remote marine atmosphere is limited by the scarcity of speciated monoterpene measurements and the complete absence of collocated measurements of particle chemical composition and monoterpene speciation. Here, in this paper, we present measurements of gas-phase volatile organic compounds, with particular focus on speciated monoterpenes, and commensurate measurements of aerosol chemical composition in the Eastern North Atlantic. The average monoterpene concentration in periods of marine air was 14 ± 10 ppt, and the dominant isomer was β-pinene (46 ± 10%), with other contributions from α-pinene, limonene, and β-ocimene. The total monoterpene concentration in marine air was greater than that of isoprene by a factor of 3.9 on average, in contrast to prior research and potentially due to the large β-pinene contribution. Monoterpenes were significantly smaller in concentration than dimethyl sulfide, which was also highlighted by the substantial contribution of sulfate to non-refractory submicron aerosol. The mean and interquartile range of the sulfate to organic aerosol mass ratio in clean marine air were 2.7 (0.7–3.4). Finally, a simple box model analysis showed that the BVOC precursors, dimethyl sulfide, methanethiol, monoterpenes, and isoprene, could sustain the measured sulfate to organic aerosol ratio in clean marine air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗