SEARCH · Engineering Papers

Results for “Color”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Investigation of varying gray scale levels for remote manipulation

A study was conducted to investigate the effects of variant monitor gray scale levels and workplace illumination levels on operators' ability to discriminate between different colors on a monochrome monitor. It was determined that 8-gray scale viewing resulted in significantly worse discrimination performance compared to 16- and 32-gray scale viewing and that there was only a negligible difference found between 16 and 32 shades of gray. Therefore, it is recommended that monitors used while performing remote manipulation tasks have 16 or above shades of gray since this evaluation has found levels lower than this to be unacceptable for color discrimination task. There was no significant performance difference found between a high and a low workplace illumination condition. Further analysis was conducted to determine which specific combinations of colors can be used in conjunction with each other to ensure errorfree color coding/brightness discrimination performance while viewing a monochrome monitor. It was found that 92 three-color combination and 9 four-color combinations could be used with 100 percent accuracy. The results can help to determine which gray scale levels should be provided on monochrome monitors as well as which colors to use to ensure the maximal performance of remotely-viewed color discrimination/coding tasks.

Bierschwale, John M.↗

NASA NTRS2008

Chromatic Modulator for a High-Resolution CCD or APS

A chromatic modulator has been proposed to enable the separate detection of the red, green, and blue (RGB) color components of the same scene by a single charge-coupled device (CCD), active-pixel sensor (APS), or similar electronic image detector. Traditionally, the RGB color-separation problem in an electronic camera has been solved by use of either (1) fixed color filters over three separate image detectors; (2) a filter wheel that repeatedly imposes a red, then a green, then a blue filter over a single image detector; or (3) different fixed color filters over adjacent pixels. The use of separate image detectors necessitates precise registration of the detectors and the use of complicated optics; filter wheels are expensive and add considerably to the bulk of the camera; and fixed pixelated color filters reduce spatial resolution and introduce color-aliasing effects. The proposed chromatic modulator would not exhibit any of these shortcomings. The proposed chromatic modulator would be an electromechanical device fabricated by micromachining. It would include a filter having a spatially periodic pattern of RGB strips at a pitch equal to that of the pixels of the image detector. The filter would be placed in front of the image detector, supported at its periphery by a spring suspension and electrostatic comb drive. The spring suspension would bias the filter toward a middle position in which each filter strip would be registered with a row of pixels of the image detector. Hard stops would limit the excursion of the spring suspension to precisely one pixel row above and one pixel row below the middle position. In operation, the electrostatic comb drive would be actuated to repeatedly snap the filter to the upper extreme, middle, and lower extreme positions. This action would repeatedly place a succession of the differently colored filter strips in front of each pixel of the image detector. To simplify the processing, it would be desirable to encode information on the color of the filter strip over each row (or at least over some representative rows) of pixels at a given instant of time in synchronism with the pixel output at that instant.

Hartley, Frank↗

NASA NTRS2012

Examining the Role of Environment in a Comprehensive Sample of Compact Groups

Compact groups, with their high number densities, small velocity dispersions, and an interstellar medium that has not been fully processed, provide a local analog to conditions of galaxy interactions in the earlier universe. The frequent and prolonged gravitational encounters that occur in compact groups affect the evolution of the constituent galaxies in a myriad of ways, for example, gas processing and star formation. Recently, a statistically significant "gap" has been discovered in the mid-infrared (MIR: 3.6-8 μm) IRAC color space of compact group galaxies. This gap is not seen in field samples and is a new example of how the compact group environment may affect the evolution of member galaxies. In order to investigate the origin and nature of this gap, we have compiled a larger sample of 37 compact groups in addition to the original 12 groups studied by Johnson et al. (yielding 174 individual galaxies with reliable MIR photometry). We find that a statistically significant deficit of galaxies in this gap region of IRAC color space is persistent in the full sample, lending support to the hypothesis that the compact group environment inhibits moderate specific star formation rates. Using this expanded sample, we have more fully characterized the distribution of galaxies in this color space and quantified the low-density region more fully with respect to MIR bluer and MIR redder colors. We note a curvature in the color-space distribution, which is fully consistent with increasing dust temperature as the activity in a galaxy increases. This full sample of 49 compact groups allows us to subdivide the data according to physical properties of the groups. An analysis of these subsamples indicates that neither projected physical diameter nor density shows a trend in color space within the values represented by this sample. We hypothesize that the apparent lack of a trend is due to the relatively small range of properties in this sample, whose groups have already been pre-selected to be compact and dense. Thus, the relative influence of stochastic effects (such as the particular distribution and amount of star formation in individual galaxies) becomes dominant. We analyze spectral energy distributions of member galaxies as a function of their location in color space and find that galaxies in different regions of MIR color space contain dust with varying temperatures and/or polycyclic aromatic hydrocarbon emission.

Environment↗

NASA NTRS2021

Spectral Effects of Varying Texture and Composition in Two-component “Mudpie” Simulations: Insights for Asteroid (101955) Bennu

Data returned by the OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer) spacecraft have shown that asteroid (101955) Bennu has a globally low-albedo surface covered in boulders with diverse texture, color, and albedo properties, and an aqueously altered composition dominated by phyllosilicates. To test whether Bennu’s color and albedo diversity could be caused by texture and/or composition variations, we performed a laboratory-based study using simple two-component mixtures (called “mudpies”) of the phyllosilicate saponite and carbon-rich opaques. Each mudpie is prepared in four different textures: fine powder, coarse particles, sanded slab, and textured rock. We find that a sanded slab made from 90% saponite and 10% lampblack is a good analog for Bennu, and the color and albedo changes due to texture variations are substantial. At 550 nm, texture changes alone can create up to 36% brightness contrast, and in color measured as a 473 nm/847 nm ratio, texture changes can provide up to 18% color contrast. In comparison, Bennu shows approximately 25% albedo and <1% color contrasts from boulder type to boulder type. These findings suggest that if texture contributes to color on Bennu, the texture variations are typically more subtle than what we simulated in the laboratory. According to our study, the color and albedo properties of different boulder types on Bennu are consistent with different concentrations of carbon-rich opaques (and possibly consistent with variations in carbonate concentration). The variations within each boulder group are consistent with textural differences.

Antara Sen↗

DOE OSTI2024

Apparatuses and methods involving thermally tuned composite material

An apparatus includes a substrate, at least one type of tuning material, and a composite material. The substrate has an interface surface or material that manifests, in response to light in a color spectrum, a particular color and a first thermal load. The particular color is associated with the first thermal load. The at least one type of tuning material manifests, in response to light in the color spectrum, the particular color and a second thermal load. The particular color is associated with the second thermal load. The first thermal load is different from the second thermal load. The composite material includes the interface surface or material and the at least one type of tuning material. The composite material manifests, in response to light in the color spectrum, the particular color and a tuned thermal load which is different than the first thermal load and the second thermal load.

Li, Wei↗

DOE OSTI2020

Exploiting Colorimetry for Fidelity in Data Visualization

Advances in multimodal characterization methods fuel the generation of increasing immense hyper-dimensional data sets. Color mapping is employed for conveying higher dimensional data in two-dimensional (2D) representations for human consumption without relying on multiple projections. How one constructs these color maps, however, critically affects how accurately one perceives data. For simple scalar fields, perceptually uniform color maps and color selection have been shown to improve data readability and interpretation across research fields. In this work, we review core concepts underlying the design of perceptually uniform color maps and extend the concepts from scalar fields to two-dimensional vector fields and three-component composition fields frequently found in materials-chemistry research to enable high-fidelity visualization. Additionally, we develop the software tools PAPUC and CMPUC to enable researchers to utilize these colorimetry principles and employ perceptually uniform color spaces for rigorously meaningful color mapping of higher dimensional data representations. Last, we demonstrate how these approaches deliver immediate improvements in data readability and interpretation in microscopies and spectroscopies routinely used in discerning materials structure, chemistry, and properties.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Quantifying Thermal Output of Energetic Materials (LDRD Final Report)

We present the results of an LDRD project, funded by the Nuclear Deterrence IA, to develop capabilities for quantitative assessment of pyrotechnic thermal output. The thermal battery igniter is used as an exemplar system. Experimental methodologies for thermal output evaluation are demonstrated here, which can help designers and engineers better specify pyrotechnic components , provide thermal output guidelines for new formulations, and generate new metrics for assessing component performance and margin given a known failure condition. A heat-transfer analysis confirms that the dominant mode of energy transfer from the pyrotechnic output plume to the heat pellet is conduction via deposition of hot titanium particles. A simple lumped-parameter model of titanium particle heat transfer and a detailed multi-phase model of deposition heat transfer are discussed. Pyrotechnic function, as defined by "go/no-go" standoff testing of a heat pellet, is correlated with experimentally measured igniter plume temperature, titanium metal particle temperature, and energy deposition. Three high-speed thermal diagnostics were developed for this task. A three-color imaging pyrometer, acquiring 100k images per second on three color channels, is deployed for measurement of titanium particle temperatures. Complimentary measurements of the overall igniter plume emission ("color") temperature were conducted using a transmission-grating spectrograph in line-imaging mode. Heat flux and energy deposition to a cold wall at the heat-pellet location were estimated using an eroding thermocouple probe, with a frequency response of ~5 kHz. Ultimate "go/no-go" function in the igniter/heat-pellet system was correlated with quantitative thermal metrics, in particular surface energy deposition and plume color temperature. Titanium metal-particle and plume color temperatures both experience an upper bound approximated by the 3245-K boiling point of TiO 2 . Average metal-particle temperatures remained nearly constant for all standoff distances at T = 2850 K, ± 300 K, while plume color temperature and heat flux decay with standoff—suggesting that heat-pellet failure results from a drop in metal-particle flux and not particle temperature. At 50% likelihood of heat-pellet failure, peak time-resolved plume color temperatures drop well below TiO 2 boiling to ~2000 - 2200 K, near the TiO 2 melting point. Estimates of peak heat flux decline from up to 1 GW/m 2 for near-field standoffs to below 320 MW/m 2 at 50% failure likelihood.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Searching for Active Low-mass Stars in the CMa Star-forming Region: Multi-band Photometry with T80S

An exotic environment surrounds the young stellar groups associated with the Canis Major (CMa) OB1/R1 region, which probably was formed under feedback from at least three supernova events having occurred a few million years ago. We use astrometric data from the Gaia-DR2 to confirm the membership of the stars in CMa R1, based on proper motion and parallax, which revealed 514 new members and candidates. The mean age of 5 Myr estimated from the color–magnitude diagram characterizes the sources as likely pre-main-sequence candidates. In total, a sample of 694 stars detected with the T80-South telescope was analyzed according to different color–color diagrams, which were compared with theoretical colors from evolutionary models, aiming to reveal the objects that exhibit color excess due to accretion processes. Accretion and magnetic activity were also explored on the basis of empirical flux–flux relation, such as F {sub 660} and F {sub 861} that are related to Hα and Ca ii triplet emission, respectively. A low fraction (∼3 percent) of the sample have Hα excess and other colors expected for stars exhibiting chromospheric activity. The number of Class I and Class II objects, identified by the infrared (Wide-field Infrared Survey Explorer) colors, indicates a disk fraction of ∼6 percent, which is lower than that expected for stellar clusters with a similar age. Such a large sample of objects associated with CMa R1 without evidences of circumstellar accretion can be interpreted as a lack of disk-bearing stars, unusual for young star-forming regions. However, this may be explained as the result of supernova events.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2022

A New Infrared Criterion for Selecting Active Galactic Nuclei to Lower Luminosities

We present a spectroscopic and photometric analysis of a sample of 416,288 galaxies from the Sloan Digital Sky Survey (SDSS) matched to mid-infrared (mid-IR) data from the Wide-field Infrared Survey Explorer (WISE). By using a new spectroscopic fitting package, GELATO (Galaxy/AGN Emission Line Analysis TOol), we are able to retrieve emission line fluxes and uncertainties for SDSS spectra and robustly determine the presence of broad lines and outflowing components, enabling us to investigate WISE color space as a function of optical spectroscopic properties. In addition, we pursue spectral energy distribution template fitting to assess the relative active galactic nucleus (AGN) contribution and nuclear obscuration to compare to existing mid-IR selection criteria with WISE. We present a selection criterion in mid-IR color space to select AGNs with an ~80% accuracy and a completeness of ~16%. This is the first mid-IR color selection defined by solely using the distribution of Type I and Type II optical spectroscopic AGNs in WISE mid-IR color space. Our selection is an improvement of ~50% in the completeness of targeting spectroscopic AGNs with WISE down to an SDSS r < 17.77 mag. In addition, our new criterion targets a less-luminous population of AGNs, with on average lower [O ιιι] luminosities by~30% ( > 0.1 dex) compared to typical WISE color–color selections. With upcoming large photometric surveys without corresponding spectroscopy, our method presents a way to select larger populations of AGNs at lower AGN luminosities and higher nuclear obscuration levels than traditional mid-IR color selections.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2021

It’s Dust: Solving the Mysteries of the Intrinsic Scatter and Host-galaxy Dependence of Standardized Type Ia Supernova Brightnesses

The use of Type Ia supernovae (SNe Ia) as cosmological tools has motivated significant effort to understand what drives the intrinsic scatter of SN Ia distance modulus residuals after standardization, characterize the distribution of SN Ia colors, and explain why properties of the host galaxies of the SNe correlate with SN Ia distance modulus residuals. We use a compiled sample of ~1450 spectroscopically confirmed photometric light curves of SNe Ia and propose a solution to these three problems simultaneously that also explains an empirical 11 σ detection of the dependence of Hubble residual scatter on SN Ia color. We introduce a physical model of color where intrinsic SN Ia colors with a relatively weak correlation with luminosity are combined with extrinsic dust-like colors ( E ( B - V )) with a wide range of extinction parameter values ( R V ). This model captures the observed trends of Hubble residual scatter and indicates that the dominant component of SN Ia intrinsic scatter is variation in R V . We also find that the recovered E ( B - V ) and R V distributions differ based on global host-galaxy stellar mass, and this explains the observed correlation ( γ ) between mass and Hubble residuals seen in past analyses, as well as an observed 4.5 σ dependence of γ on SN Ia color. This finding removes any need to ascribe different intrinsic luminosities to different progenitor systems. Finally, we measure biases in the equation of state of dark energy ( w ) up to |Δ w | = 0.04 by replacing previous models of SN color with our dust-based model; this bias is larger than any systematic uncertainty in previous SN Ia cosmological analyses.

Astronomy & Astrophysics↗

DOE OSTI2022

Host Dark Matter Halos of SDSS Red and Blue Quasars: No Significant Difference in Large-scale Environment

The observed optical colors of quasars are generally interpreted in one of two frameworks: unified models that attribute the color to the random orientation of the accretion disk along the line of sight, and evolutionary models that invoke connections between quasar systems and their environments. We test these schemas by probing the dark matter halo environments of optically selected quasars as a function of g – i optical color by measuring the two-point correlation functions of ~0.34 million eBOSS quasars as well as the gravitational deflection of cosmic microwave background photons around ~0.66 million XDQSO photometric quasar candidates. We do not detect a trend of halo bias with optical color through either analysis, finding that optically selected quasars at 0.8 < z < 2.2 occupy halos of characteristic mass M h ~ 3 × 10 12 h –1 M ⊙ regardless of their color. This result implies that a quasar's large-scale halo environment is not strongly connected to its observed optical color. We also confirm the findings of fundamental differences in the radio properties of red and blue quasars by stacking 1.4 GHz FIRST images at their positions, suggesting the observed differences cannot be attributed to orientation. Instead, the differences between red and blue quasars likely arise on nuclear-galactic scales, perhaps owing to reddening by a nuclear dusty wind. Finally, we show that optically selected quasars' halo environments are also independent of their r – W2 optical–infrared colors, while previous work has suggested that mid-infrared-selected obscured quasars occupy more massive halos. We discuss the implications of this result for models of quasar and galaxy coevolution.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1971

Exploration of Marine Resources by Photographic Remote Sensing

The interpretation of photographs in oceanographic remote sensing is discussed. The photographs were made from spacecraft with two exceptions. Two photographs were made from aircraft. There were three types of film used to make the photographs: black-and-white, color, and color IR. Black and white photography is well known; it presents pictures in various shades of gray from black to white. Color film presents pictures in color, very nearly as the human eye sees them. Color IR film presents pictures in color also but not as seen by the human eye. Blue becomes much deeper blue, green is suppressed to some extent, and red is recorded beyond the visual range of the human eye, out in the near infrared. The most noticeable effect of the use of color IR film is that leaf materials which are highly reflective in the infrared part of the spectrum are presented as red.

Duntley, S. Q.↗

NASA NTRS1975

Plan for the uniform mapping of earth resources and environmental complexes from Skylab imagery. Assessment of natural vegetation, environmental, and crop analogs

The author has identified the following significant results. For interpreting a wide range of natural vegetation analogs, S-190A color infrared and the ERTS-1 color composite were consistently more useful than were conventional color or black and white photos. Color infrared was superior for five vegetation analogs while color was superior for only three. The errors in identification appeared to associate more with black and white single band images than with multiband color. For rice crop analogs, spectral and spatial discriminations both contribute to the usefulness of images for data collection. Tests and subjective analyses conducted in this study indicated that the spectral bands exploited in color infrared film were the most useful for agricultural crop analysis. Accuracy of crop identification on any single date of Skylab images was less than that of multidate analysis due to differences in crop calendar, cultural practices used, rice variety, planting date, planting method, water use, fertilization, disease, or mechanical problems.

Poulton, C. E.↗

NASA NTRS1989

Problems with the Baade-Wesselink method

The discrepancy noted in radii obtained by the Baade-Wesselink method when different colors are used to determine the effective temperatures is explored. The discrepancy is found to be due to an inconsistency in the applied temperature-color calibrations. The assumption of the maximum likelihood method that beta (the effective temperature + 0.1 times the bolometric correction) is a linear function of the color is valid for the B-V and V-I colors, but not for the V-R colors. It is suggested that the errors introduced by the nonlinearity in the relation between beta and the V-R colors will produce radii which are too large. The radii derived from the V-B colors appear to be too small.

Bohm-Vitense, E.↗

NASA NTRS1990

Observations and models of star formation in the tidal features of interacting galaxies

Multi-color surface photometry (BVri) is presented for the tidal features in a sample of interacting galaxies. Large color variations are found between the morphological components and within the individual components. The blue colors in the primary and the tidal features are most dramatic in B-V, and not in V-i, indicating that star formation instead of metallicity or age dominates the colors. Color variations between components is larger in systems shortly after interaction begins and diminishes to a very low level in systems which are merged. Photometric models for interacting systems are presented which suggest that a weak burst of star formation in the tidal features could cause the observed color distributions. Dynamical models indicate that compression occurs during the development of tidal features causing an increase in the local density by a factor of between 1.5 and 5. Assuming this density increase can be related to the star formation rate by a Schmidt law, the density increases observed in the dynamical models may be responsible for the variations in color seen in some of the interacting systems. Limitations of the dynamical models are also discussed.

Wallin, John F.↗

NASA NTRS1992

Spectroscopy of galaxies in distant clusters. IV - A catalog of photometry and spectroscopy for galaxies in seven clusters with z in the range of 0.35 to 0.55

Photometry and spectroscopy for seven deep fields containing distant clusters of galaxies with z in the range of 0.35 to 0.55 are presented. Positions and photometric parameters, including r-magnitudes g - r and r - i colors, surface brightnesses, and photometric profile types are given for about 2000 galaxies. Low-resolution spectroscopy is obtained from which redshifts are determined for 289 objects, of which 190 are cluster members. These are classified according to dominant spectral features, and examples are plotted in each cluster. Color-magnitude and color-color diagrams are formed which show trends in the cluster populations, and maps are made of the cluster field using the color-color relations to increase the contrast of cluster over field. Galaxies with spectra typical of old stellar populations cluster most strongly, with active galaxies, those with recent or ongoing star formation, or an active nucleus, distributed more diffusely. The g - r color is well correlated with active star formation as judged from spectral features.

Dressler, Alan↗

NASA NTRS1993

The nature of faint emission-line galaxies

One of the results of faint galaxy redshift surveys is the increased fraction of galaxies which have strong emission-line spectra. These faint surveys find that roughly 50 percent of the galaxies have an equivalent width of (OII), W sub 3727, greater than 20 A while this fraction is less than 20 percent in the DARS survey. This has been interpreted as evidence for strong evolution in the galaxy population at redshifts less than 0.5. In order to further investigate the properties of the galaxies in faint redshift surveys, two important factors must be addressed. The first is the observed correlation between color, luminosity, and W sub 3727. There is a correlation between color and the strength of emission lines, bluer galaxies having stronger emission features, as evident for Markarian galaxies and for galaxies in Kennicutt's spectrophotometric atlas. This correlation also applies galaxies in faint redshift surveys. In addition, low luminosity galaxies have a larger average W sub 3727 (and bluer colors) than higher luminosity galaxies. This is illustrated for Kennicutt's low z late-type galaxies, for the Durham Faint Surveys, and for galaxies in SA68. The second factor which must be incorporated into any interpretation of the faint emission galaxies is the different luminosity functions for galaxies depending on color. This is usually modeled by varying M* for different color classes (or morphological types); however, the shape of the luminosity function is different for galaxies with different colors. Low luminosity, blue galaxies have a much larger number density than low luminosity, red galaxies. Furthermore, the low luminosity end of the blue galaxy luminosity function is not well fit by a Schechter function. These two factors have been included in a very simple, no-evolution, model for the galaxy population. This model uses the luminosity functions from Shanks (1990) and spectral energy distributions (SED's) from Bruzual (1988). W sub 3727 is predicted using the correlation (including dispersion) with color.

Smetanka, John J.↗

NASA NTRS1993

Jet induced star formation in centrally dominant galaxies?

Using U-I CCD color maps of two centrally dominant cluster galaxies, we find unusual color structures which may be due to star formation which has been induced by their radio sources. These objects, located in the clusters A1795 and A2597, have blue central colors to radii of 20 kpc, spatially extended emission-line structures, and powerful radio sources. They reside at the centers of cooling flows with mass-accretion rates which are estimated to be approximately greater than 300 solar mass/yr. The regions of bluest local color are superposed on or along their radio-source structures. Our observations suggest that the radio sources associated with these objects may be inducing massive star formation in their central 20 kpc. The star formation may be the result of the radio plasma interacting with the warm emission-line gas and dense, x-ray emitting filaments similar to those recently discovered in two other clusters with the ROSAT Observatory. Since radio jets are likely to be transient, this may help to explain the scatter in the correlations between color and mass-accretion rate, although other factors may also contribute. Alternatively, scattered radiation from a hidden active nucleus or recent mergers may be responsible for the color structure. The color and radio properties of these objects are qualitatively similar but smaller in luminosity and spatial extent to those found in high redshift radio galaxies. Our observations of galaxies at z approximately = 0.06-0.1 show that processes similar to 'the alignment effect' found in high redshift radio galaxies occur at more recent epochs.

Mcnamara, Brian R.↗