SEARCH · Engineering Papers

Results for “Batch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

All sources NASA NTRS DOE OSTI

NASA NTRS1974

SEM evaluation of metallization on semiconductors

A test method for the evaluation of metallization on semiconductors is presented and discussed. The method has been prepared in MIL-STD format for submittal as a proposed addition to MIL-STD-883. It is applicable to discrete devices and to integrated circuits and specifically addresses batch-process oriented defects. Quantitative accept/reject criteria are given for contact windows, other oxide steps, and general interconnecting metallization. Figures are provided that illustrate typical types of defects. Apparatus specifications, sampling plans, and specimen preparation and examination requirements are described. Procedures for glassivated devices and for multi-metal interconnection systems are included.

Fresh, D. L.↗

NASA NTRS1974

Comparison of fracture mechanisms for carbon-epoxy composites under tensile loading

The effects of oxidative surface treatments and differences in resin crack sensitivity on the tensile properties of carbon-epoxy composites have been investigated. A comparison of the fracture mechanisms for two different fiber batches was made in both model and engineering composites, using unmodified and modified epoxy resin. It has been observed that two distinct characteristics occur in the fracture surfaces of most engineering composites; first, fibers which fracture at the surface result in cleavage failure and, second, those which have fractured elsewhere and pulled out. A detailed discussion of these observations is contained in this paper.

Mazzio, V. F.↗

NASA NTRS1975

Sequential filtering applied to the determination of tracking station locations

The extended sequential filter has been applied to the problem of dynamically determining the geocentric coordinates of two laser satellite tracking stations. This filter provides significant advantages over the classical batch methods through (1) fewer iterations required for convergence, (2) wider radius of convergence, and (3) availability of the parameter estimate evolution. Processing the data sequentially readily identifies the data arcs required to minimize the effects of geopotential model errors. By means of the Smithsonian standard earth 2 and the Goddard earth model 1 geopotentials to reduce laser range observations of the Beacon Explorer-C satellite, it is demonstrated that a two-pass arc is optimal for estimating the height of one station and all coordinates of the second station while minimizing the effect of geopotential model error. These two-pass estimates are in good agreement with other determinations that utilize considerably more data as well as different satellites.

Schutz, B. E.↗

NASA NTRS1975

Advances in superconducting quantum electronic microcircuit fabrication

Standard microelectronic fabrication techniques have been utilized to produce batch quantities of superconducting quantum electronic devices and circuits. The overall goal is a fabrication technology yielding circuits that are rugged and stable and capable of being fabricated controllably and reproducibly in sizeable quantities. Our progress toward this goal is presented, with primary emphasis on the most recent work, which includes the use of electron-beam lithography and techniques of hybrid microelectronics. Several prototype microcircuits have been successfully fabricated. These microcircuits are formed in a thin-film parent material consisting of layers of superconducting and normal metals, and use proximity-effect structures as the active circuit elements.

Kirschman, R. K.↗

NASA NTRS1975

Use of graphics in the design office at the Military Aircraft Division of the British Aircraft Corporation

The CAD/CAM interactive computer graphics system was described; uses to which it has been put were shown, and current developments of the system were outlined. The system supports batch, time sharing, and fully interactive graphic processing. Engineers using the system may switch between these methods of data processing and problem solving to make the best use of the available resources. It is concluded that the introduction of on-line computing in the form of teletypes, storage tubes, and fully interactive graphics has resulted in large increases in productivity and reduced timescales in the geometric computing, numerical lofting and part programming areas, together with a greater utilization of the system in the technical departments.

Coles, W. A.↗

NASA NTRS1976

Performance of the square root information filter for navigation of the Mariner 10 spacecraft

The use is described of a sequential least squares filter in the orbit determination for the Mariner Venus-Mercury (Mariner 10) spacecraft. The orbit determination strategy outlining the use of both the sequential filter and a conventional batch filter is given. Highlighted are the mission events from launch to the first Mercury encounter with emphasis on the sequential filter performance. Advantages to the mission derived from the sequential filter are pointed out.

Christensen, C. S.↗

NASA NTRS1976

Detailed requirements document for the integrated structural analysis system, phase B

The requirements are defined for a software system entitled integrated Structural Analysis System (ISAS) Phase B which is being developed to provide the user with a tool by which a complete and detailed analysis of a complex structural system can be performed. This software system will allow for automated interface with numerous structural analysis batch programs and for user interaction in the creation, selection, and validation of data. This system will include modifications to the 4 functions developed for ISAS, and the development of 25 new functions. The new functions are described.

Rainey, J. A.↗

NASA NTRS1975

Conversion of LARSYS III.1 to an IBM 370 computer

A software system for processing multispectral aircraft or satellite data (LARSYS) was designed and written at the Laboratory for Applications of Remote Sensing at Purdue University. This system, being implemented on an IBM 360/67 computer utilizing the Cambridge Monitor System, is of an interactive nature. TAMU LARSYS maintains the essential capabilities of Purdue's LARSYS. The machine configuration for which it has been converted is an IBM-compatible Amdahl 470V/6 computer utilizing the time sharing option of the currently implemented OS/VS2 Operating System. Due to TSO limitations, the NASA-JSC deliverable TAMU LARSYS is comprised of two parts. Part one is a TSO Control Card Checker for LARSYS control cards, and part two is a batch version of LARSYS. Used together, they afford most of the capabilities of the original LARSYS III.1. Additionally, two programs have been written by TAMU to support LARSYS processing. The first is an ERTS-to-MIST conversion program used to convert ERTS data to the LARSYS input form, the MIST tape. The second is a system runtable code which maintains tape/file location information for the MIST data sets.

Williams, G. N.↗

NASA NTRS1976

Models and error analyses in urban air quality estimation

Estimation theory has been applied to a wide range of aerospace problems. Application of this expertise outside the aerospace field has been extremely limited, however. This paper describes the use of covariance error analysis techniques in evaluating the accuracy of pollution estimates obtained from a variety of concentration measuring devices. It is shown how existing software developed for aerospace applications can be applied to the estimation of pollution through the processing of measurement types involving a range of spatial and temporal responses. The modeling of pollutant concentration by meandering Gaussian plumes is described in some detail. Time averaged measurements are associated with a model of the average plume, using some of the same state parameters and thus avoiding the problem of state memory. The covariance analysis has been implemented using existing batch estimation software. This usually involves problems in handling dynamic noise; however, the white dynamic noise has been replaced by a band-limited process which can be easily accommodated by the software.

Englar, T., Jr.↗

NASA NTRS1977

Low-cost polycrystalline process for solar cells

Economical batch process includes resolidification step to improve conversion efficiency. Experimental models made by process vary in conversion efficiency from 1.4 to more than 6 percent.

Chu, T. L.↗

NASA NTRS1977

Shrink tubing identifier

Modified typewriter is used to code small-batch lengths of shrink tubing. Method replaces heat-operated wire-marking machines, is faster, and less hazardous to operating personnel.

Plummer, R. F.↗

NASA NTRS1976

Detailed design specification for the ALT Shuttle Information Extraction Subsystem (SIES)

The approach and landing test (ALT) shuttle information extraction system (SIES) is described in terms of general requirements and system characteristics output products and processing options, output products and data sources, and system data flow. The ALT SIES is a data reduction system designed to satisfy certain data processing requirements for the ALT phase of the space shuttle program. The specific ALT SIES data processing requirements are stated in the data reduction complex approach and landing test data processing requirements. In general, ALT SIES must produce time correlated data products as a result of standardized data reduction or special purpose analytical processes. The main characteristics of ALT SIES are: (1) the system operates in a batch (non-interactive) mode; (2) the processing is table driven; (3) it is data base oriented; (4) it has simple operating procedures; and (5) it requires a minimum of run time information.

Clouette, G. L.↗

NASA NTRS1976

A program continuation to develop processing procedures for advanced silicon solar cells

Shallow junctions, aluminum back surface fields and tantalum pentoxide (Ta205) antireflection coatings coupled with the development of a chromium-palladium-silver contact system, were used to produce a 2 x 4 cm wraparound contact silicon solar cell. One thousand cells were successfully fabricated using batch processing techniques. These cells were 0.020 mm thick, with the majority (800) made from nominal ten ohm-cm silicon and the remainder from nominal 30 ohm-cm material. Unfiltered, these cells delivered a minimum AMO efficiency at 25 C of 11.5 percent and successfully passed all the normal in-process and acceptance tests required for space flight cells.

Avery, J. E.↗

NASA NTRS1977

Development of flame resistant treatment for Nomex fibrous structures

Flame resistant fibrous materials for space shuttle application were developed through chemical modification of commercially available aromatic polyamide fibrous products. The new surface treatment was achieved in the laboratory by ultraviolet activation of the fabric in the presence of fluoroolefin monomers and a diluent gas. The monomers grafted under these conditions provide the improved properties of the fabric in flame resistance, chemical inertness, and nonwettability without the sacrifice of color or physical properties. The laboratory reaction vessel was scaled-up to a batch continuous process, which treats ten yards of the commercial width textiles. The treated commercial width Nomex (HT-10-41) from the scaled-up reactor is self-extinguishing in an oxygen-enriched environment, water-repellent, soft, silky, and improved in chemical resistance. Unlike most textile processes, the grafting unit operates under dry conditions and no chemical by-products have to be washed out of the finished product.

Toy, M. S.↗

NASA NTRS1977

Diagonal dominance for the multivariable Nyquist array using function minimization

A new technique for the design of multivariable control systems using the multivariable Nyquist array method was developed. A conjugate direction function minimization algorithm is utilized to achieve a diagonal dominant condition over the extended frequency range of the control system. The minimization is performed on the ratio of the moduli of the off-diagonal terms to the moduli of the diagonal terms of either the inverse or direct open loop transfer function matrix. Several new feedback design concepts were also developed, including: (1) dominance control parameters for each control loop; (2) compensator normalization to evaluate open loop conditions for alternative design configurations; and (3) an interaction index to determine the degree and type of system interaction when all feedback loops are closed simultaneously. This new design capability was implemented on an IBM 360/75 in a batch mode but can be easily adapted to an interactive computer facility. The method was applied to the Pratt and Whitney F100 turbofan engine.

Leininger, G. G.↗

NASA NTRS1977

Viking satellite orbit determination

During the summer of 1976, the two Viking spacecraft, each consisting of an orbiter-lander combination, were inserted into orbit about Mars. The paper describes the experiences of the Viking Satellite Orbit Determination Team in determining Mars centered ephemerides of the orbiters and positions of the landers from the two-way Doppler and range data, and synthesizes the different phases of the navigation plan which involves pre-flight modeling and error analysis for all Viking navigation functions from launch through landing. The problem of initial orbit convergence is solved by using DPODP's (Double Precision Orbit Determination Program) square-root batch data filter, and gravity models for both Viking I and Viking II were produced from the combination of short arc estimates. The importance of synchronous Viking orbits (with the rotational period of Mars) is stressed and future extended missions of the spacecraft are outlined.

Hildebrand, C. E.↗

NASA NTRS1976

A simulation of water pollution model parameter estimation

A parameter estimation procedure for a water pollution transport model is elaborated. A two-dimensional instantaneous-release shear-diffusion model serves as representative of a simple transport process. Pollution concentration levels are arrived at via modeling of a remote-sensing system. The remote-sensed data are simulated by adding Gaussian noise to the concentration level values generated via the transport model. Model parameters are estimated from the simulated data using a least-squares batch processor. Resolution, sensor array size, and number and location of sensor readings can be found from the accuracies of the parameter estimates.

Kibler, J. F.↗

NASA NTRS1976

A moving-window parameter adaptive control system for the F8-DFBW aircraft

This paper describes the moving-window parameter adaptive control system developed for the NASA F8-DFBW aircraft. The control system employs a parameter identification process that, iteratively, adjusts parameters of a model of the aircraft motions in a batch processing manner so that responses generated from the model fit the outputs of sensors stored in a finite record referred to as the moving window. Tests are made on the validity of the parameter estimates before using the parameters in an on-line design process. The on-line design process is an algebraic mapping of the parameters of the model into primary control system feedback and feedforward gains. The mapping was selected to satisfy specific flying quality characteristics over the range of parameter variations expected. Results are presented from simulation studies on the identification algorithm, tests for parameter validity, and the on-line design process.

Montgomery, R. C.↗