Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BACKSCATTER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Influence of grain orientation on the incipient oxidation behavior of Haynes 230 at 900 °C

Ni-based superalloy Haynes 230 is used in many applications such as very high temperature reactor (VHTR) or solid oxide fuel cells (SOFCs) where it is exposed to high temperature service environment. In order to improve the resistance for high temperature oxidation, the effect of crystallographic orientation on the early stage oxidation was investigated. It was demonstrated that different oxide thicknesses are formed on grains having different orientations. Comparison of electron backscatter diffraction (EBSD) orientation maps before and after oxidation at 900 °C indicates that grains near (111) orientation, especially with the deviation angle from <111> that is smaller than 20°, are more oxidation resistant than grains of other orientations. Correlation between the results of electron backscatter diffraction (EBSD) and atomic force microscopy (AFM) was used to compare the oxidation rate of grains having different crystallographic orientation. The oxidation rate was found to change with the crystallographic orientation as follows (111) < (110) < (100), also it was demonstrated that the oxidation rate changes are a nearly linear function of the angle of deviation from <111> direction. The morphology of surface oxide also depends on the orientation of grains. - Highlights: • Comparison of EBSD maps before and after oxidation allows to investigate the effect of orientation on oxidation in a more direct way; • Effect of crystallographic orientation on oxidation behavior of alloy 230 is studied by combination of EBSD and AFM; • Different thickness of oxide is formed on grain with different orientation and dependence of anisotropic oxidation behavior is discussed; • The morphology of grains is also orientation dependence.

36 MATERIALS SCIENCE↗

Interrupted in situ EBSD study of texture evolution and mechanism of surface grains in electroformed Ni after annealing with an initially duplex <100> + <111> fiber texture during uniaxial tensile deformation

Highlights: • The texture evolution of the electroformed Ni was investigated by using an interrupted in situ electron backscattered diffraction. • The initial <100> fiber component evolved into the metastable cube component with a weaker copper component. • Only a few grains of the initial <111> fiber component evolved into the copper orientation. - Abstract: The texture evolution process and mechanism of surface grains in electroformed Ni after annealing with an initially duplex <100> + <111> fiber texture during uniaxial tensile deformation were investigated by using interrupted in situ electron backscattered diffraction. The results showed that the initially duplex <100> + <111> fiber texture evolved into the metastable Cube orientation with a weak Cu orientation during the uniaxial tensile deformation. The volume fractions of <100> and <111> fiber texture decreased from 54.0% to 29.3% and 16.6% to 6.6%, respectively. The volume of the Cube orientation remained almost stable at 12%, whereas that of the Cu orientation increased from 1% to 2.9%. A simulation of the final preferred orientation based on the Taylor model was a cubic texture, which qualitatively agreed well with the experimental result. The simulated results indicated that the formed Cube and Cu textures evolved from the initial <100> and <111> fiber textures, respectively.

36 MATERIALS SCIENCE↗

Characteristic orientation relationships in nanoscale Al-Al2Cu Eutectic

Highlights: • Nano-scale lamellar Al-Al{sub 2}Cu eutectic was synthesized by laser surface remelting. • Orientation relationship (OR) is {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al.} • The OR has two variants, I has (001){sub Al2Cu}||{001}{sub Al} and II has (001){sub Al2Cu}||{111}{sub Al.} • Variant I is associated with low energy interfaces. - Abstract: A fully lamellar Al-Al{sub 2}Cu eutectic comprising alternate nano-scale α-Al and θ-Al{sub 2}Cu phases was synthesized through laser surface remelting of a cast Al-32.7 wt% Cu alloy. The orientation relationship between α-Al and θ-Al{sub 2}Cu phases was investigated from Kikuchi patterns obtained using electron backscattered diffraction (EBSD) and t-EBSD techniques. The characteristic orientation relationship (OR), {211}{sub Al2Cu}||{111}{sub Al} and <120>{sub Al2Cu}||<110>{sub Al}, was observed independent of interlamellar spacing. This OR has two variants where, besides the two parallel planes, the variant I exhibits (001){sub Al2Cu}||{001}{sub Al} and the variant II exhibits (001){sub Al2Cu}||{111}{sub Al}. Variant I prevails over variant II in laser-processed α-Al and θ-Al{sub 2}Cu nano-laminates, and atomistic modeling indicates that this is due to the low energy interfaces associated with variant I, i.e., {211}{sub Al2Cu}||{111}{sub Al} or (001){sub Al2Cu}||{001}{sub Al}. A comprehensive understanding of the crystallographic orientation relationships between two phases may help predict or explain the active slip systems in fine-scale Al-Al{sub 2}Cu eutectic and other cubic-tetragonal two-phase materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Beam current effect as a potential challenge in SEM-EBSD in situ tensile testing

Highlights: • In situ SEM-EBSD tensile tests were conducted using 304L steels with 8 and 10.4% Ni. • KAM and GROD evolution, twinning, and phase instability were investigated. • Phase transformation in 8% Ni-steel was sensitive to the electron beam current. In situ mechanical tensile tests coupled with electron backscatter diffraction (EBSD) analysis were conducted using specimens of two 304L steels with ~8 and 10.4% Ni content, respectively. Twinning was observed in steel with 10.4% Ni content, whereas steel with 8% Ni content demonstrated martensitic transformation. Testing showed that the kinetics of martensitic transformation in steel with 8% Ni content was influenced by the electron beam current used during EBSD scans. Continuous scanning using 32 nA nominal beam current led to suppression of the phase instability in the near-surface layer, but acceptable comparable-to-the-bulk results were obtained using 8 nA beam current. The exact mechanism of the beam current role is unclear, but it appears to be neutral regarding Kernel Average Misorientation behavior and deformation-induced twinning.

36 MATERIALS SCIENCE↗

Defect studies in ion irradiated AlGaN

Defects created in Al0.4Ga0.6N crystals by 320 keV Ar ion irradiation were studied by using RBS/C and TEM techniques. One of the main aims of the work was to use a new version of McChasy, a Monte – Carlo simulation code of backscattering spectra, for the analysis of experimental results obtained for a dislocations-containing crystal. Transmission Electron Microscopy technique was used to get a better insight into dislocation and dislocation loop geometries in order to restrict the range of parameters used in simulations. RBS/C analysis was performed in a 1.5 MeV – 3 MeV energy range in order to check if MC simulations correctly reproduce backscattering spectra at different energies.

36 MATERIALS SCIENCE↗

Damage Profiles and Ion Distribution in Pt-irradiated SiC

Single crystalline 6H-SiC samples were irradiated at 150 K with 2 MeV Pt ions. The local volume swelling was determined by electron energy loss spectroscopy (EELS), and a nearly sigmoidal dependence on irradiation dose is observed. The disorder profiles and ion distribution were determined by Rutherford backscattering spectrometry (RBS), transmission electron microscopy, and secondary ion mass spectrometry. Since the volume swelling reaches 12% over the damage region at high ion fluence, the effect of lattice expansion is considered and corrected for in the analysis of RBS spectra to obtain depth profiles. Projectile and damage profiles are estimated by SRIM (Stopping and Range of Ions in Matter).When compared with the measured profiles, the SRIM code predictions of ion distribution and the damage profiles are underestimated due to significant overestimation of the electronic stopping power for the slow heavy Pt ions. By utilizing the reciprocity method, which is based on the invariance of the inelastic energy loss in ion-solid collisions against interchange of projectile and target atom, a much lower electronic stopping power is deduced. A simple approach, based on reducing the density of SiC target in SRIM simulation, is proposed to compensate the overestimated SRIM electronic stopping power values, which results in improved agreement between predicted and measured damage profiles and ion ranges.

Environmental Molecular Sciences Laboratory↗

Revisiting Elastic Scattering of D(n, n)D reaction

Interest has risen recently concerning the angular distribution of neutron elastic scattering on deuterium at low incident energies. The main subject is the amount of backscattering at energies below 3.2 MeV observed in differential cross-section measurements and represented in various evaluations. These various angles of approach encompass fundamental nuclear-data measurements, three-body nuclear-theory calculations, evaluated nuclear -data libraries and associated data processing, and the simulation of critical experiments involving heav y water. A new theoretical approach on the basis of three -nucleon theory was made that resulted in new angular distributions. At the GELINA neutron time-of-flight facility a new experimental setup was developed to measure elastic scattering of neutrons on deuterium in the energy range of interest. The technique proposed is complementary to the earlier works by detecting the scattered neutron instead of the recoiling deuterium. The setup is an array of two HPGe detectors, each with a {sup 10}B neutron-gamma converter. Preliminary GELINA findings using a C6D6 target indicate less backscatter than predicted by ENDF/B -VII.0, in contrast to the nuclear-theory results. It is expected that completion of the planned work will reduce the uncertainty of the energy-angle distributions for deuterium elastic scattering and contribute to an improved deuterium evaluation in a future release of ENDF/B -VII.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Plasmon-enhanced microalgal growth in miniphotobioreactors

Photoactivity of green microalgae is nonmonotonic across the electromagnetic spectrum. Experiments on Chlamydomonas reinhardtii (green alga) and Cyanothece 51142 (green-blue alga) show that wavelength specific backscattering in the blue region of the spectrum from Ag nanoparticles, caused by localized surface plasmon resonance, can promote algal growth by more than 30%. The wavelength and light flux of the backscattered field can be controlled by varying the geometric features and/or concentration of the nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Measurement Of Hydrogen Capacities And Stability In Thin Films Of AlH Deposited By Magnetron Sputtering

Thin, hydrogenated aluminum hydride films were deposited on silicon substrates using unbalanced magnetron (UBM) sputtering of a high purity aluminum target under electrically grounded conditions. Argon was used as sputtering gas and hydrogenation was carried out by diluting the growth plasma with hydrogen. The effect of hydrogen partial pressure on the final concentration of trapped elements including hydrogen has been studied using ion beam analysis (IBA) techniques. Moreover, in-situ thermal stability of trapped hydrogen in the film was carried out using Rutherford Backscattering Spectrometry (RBS), Non-Rutherford Backscattering Spectrometry (NRBS) and Elastic Recoil Detection Analysis (ERDA). Microstructure of the film was investigated by SEM analysis. Hydrogen content in the thin films was found decreasing as the films were heated above 110 deg. C in vacuum.

36 MATERIALS SCIENCE↗

The Energy Loss of Li and C Ions with MeV Energies in the Polycarbonate and Polypropylene

Stopping power and straggling of Li ions and C ions at mean energy 3.8-5.4 MeV and 5.6-6.9 MeV, respectively, in polycarbonate (PC) and at mean energy 3.7-5.2 MeV and 6.8-8.0 MeV in polypropylene (PP) foils have been measured using ion beams from a Tandetron 4130 MC accelerator. The ions scattered from a thin, primary gold target were registered by a surface barrier detector partially covered with a thin foil of the investigated polymer. The stopping power was determined from the energy difference between the signals from the ions directly backscattered from the Au layer and the ions backscattered and slowed down in the foil. The foil thickness was determined by the weighing procedure. The experimentally determined stopping powers were compared with those calculated with the SRIM 2010 code. The measured stopping powers are in good agreement for Li and C in PC, the differences being within 0.1-1.6% for Li and 0.2-2.1% for C. For Li and C in PP, the stopping powers are lower than the calculated ones, the differences being within 0.5-2.8% for Li and 3.6-6.1% for C. The energy straggling was determined from the width of the RBS signals. The experimentally determined energy straggling was found to fluctuate around the values calculated according to Bohr theory.

36 MATERIALS SCIENCE↗

Modification of ordinary-mode reflectometry system to detect lower-hybrid waves in Alcator C-Mod

Backscattering experiments to detect lower-hybrid (LH) waves have been performed in Alcator C-Mod, using the two modified channels (60 GHz and 75 GHz) of an ordinary-mode reflectometry system with newly developed spectral recorders that can continuously monitor spectral power at a target frequency. The change in the baseline of the spectral recorder during the LH wave injection is highly correlated to the strength of the X-mode non-thermal electron cyclotron emission. In high density plasmas where an anomalous drop in the lower hybrid current drive efficiency is observed, the observed backscattered signals are expected to be generated near the last closed flux surface, demonstrating the presence of LH waves within the plasma. This experimental technique can be useful in identifying spatially localized LH electric fields in the periphery of high-density plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Spherical shock-ignition experiments with the 40 + 20-beam configuration on OMEGA

Spherical shock-ignition experiments on OMEGA used a novel beam configuration that separates low-intensity compression beams and high-intensity spike beams. Significant improvements in the performance of plastic-shell, D 2 implosions were observed with repointed beams. The analysis of the coupling of the high-intensity spike beam energy into the imploding capsule indicates that absorbed hot-electron energy contributes to the coupling. The backscattering of laser energy was measured to reach up to 36% at single-beam intensities of ~ 8 x 10 15 W/cm/ 2 . Hard x-ray measurements revealed a relatively low hot-electron temperature of ~30 keV independent of intensity and timing. At the highest intensity, stimulated Brillouin scattering occurs near and above the quarter-critical density and the two-plasmon-decay instability is suppressed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solid-phase epitaxy of silicon amorphized by implantation of the alkali elements rubidium and cesium

The redistribution of implanted Rb and Cs profiles in amorphous silicon during solid-phase epitaxial recrystallization has been investigated by Rutherford backscattering spectroscopy and secondary ion mass spectroscopy. For the implantation dose used in these experiments, the alkali atoms segregate at the a-Si/c-Si interface during annealing resulting in concentration peaks near the interface. In this way, the alkali atoms are moved towards the surface. Rutherford backscattering spectroscopy in ion channeling configuration was performed to measure average recrystallization rates of the amorphous silicon layers. Preliminary studies on the influence of the alkali atoms on the solid-phase epitaxial regrowth rate reveal a strong retardation compared to the intrinsic recrystallization rate.

36 MATERIALS SCIENCE↗

Hydrodynamic simulations of long-scale-length two-plasmon-decay experiments at the Omega Laser Facility

Direct-drive-ignition designs with plastic CH ablators create plasmas of long density scale lengths (L{sub n} {>=} 500 {mu}m) at the quarter-critical density (N{sub qc}) region of the driving laser. The two-plasmon-decay (TPD) instability can exceed its threshold in such long-scale-length plasmas (LSPs). To investigate the scaling of TPD-induced hot electrons to laser intensity and plasma conditions, a series of planar experiments have been conducted at the Omega Laser Facility with 2-ns square pulses at the maximum laser energies available on OMEGA and OMEGA EP. Radiation-hydrodynamic simulations have been performed for these LSP experiments using the two-dimensional hydrocode draco. The simulated hydrodynamic evolution of such long-scale-length plasmas has been validated with the time-resolved full-aperture backscattering and Thomson-scattering measurements. draco simulations for CH ablator indicate that (1) ignition-relevant long-scale-length plasmas of L{sub n} approaching {approx}400 {mu}m have been created; (2) the density scale length at N{sub qc} scales as L{sub n}({mu}m) Asymptotically-Equal-To (R{sub DPP} Multiplication-Sign I{sup 1/4}/2); and (3) the electron temperature T{sub e} at N{sub qc} scales as T{sub e}(keV) Asymptotically-Equal-To 0.95 Multiplication-Sign {radical}(I), with the incident intensity (I) measured in 10{sup 14} W/cm{sup 2} for plasmas created on both OMEGA and OMEGA EP configurations with different-sized (R{sub DPP}) distributed phase plates. These intensity scalings are in good agreement with the self-similar model predictions. The measured conversion fraction of laser energy into hot electrons f{sub hot} is found to have a similar behavior for both configurations: a rapid growth [f{sub hot} Asymptotically-Equal-To f{sub c} Multiplication-Sign (G{sub c}/4){sup 6} for G{sub c} < 4] followed by a saturation of the form, f{sub hot} Asymptotically-Equal-To f{sub c} Multiplication-Sign (G{sub c}/4){sup 1.2} for G{sub c} {>=} 4, with the common wave gain is defined as G{sub c}=3 Multiplication-Sign 10{sup -2} Multiplication-Sign I{sub qc}L{sub n}{lambda}{sub 0}/T{sub e}, where the laser intensity contributing to common-wave gain I{sub qc}, L{sub n}, T{sub e} at N{sub qc}, and the laser wavelength {lambda}{sub 0} are, respectively, measured in [10{sup 14} W/cm{sup 2}], [{mu}m], [keV], and [{mu}m]. The saturation level f{sub c} is observed to be f{sub c} Asymptotically-Equal-To 10{sup -2} at around G{sub c} Asymptotically-Equal-To 4. The hot-electron temperature scales roughly linear with G{sub c}. Furthermore, to mitigate TPD instability in long-scale-length plasmas, different ablator materials such as saran and aluminum have been investigated on OMEGA EP. Hot-electron generation has been reduced by a factor of 3-10 for saran and aluminum plasmas, compared to the CH case at the same incident laser intensity. draco simulations suggest that saran might be a better ablator for direct-drive-ignition designs as it balances TPD mitigation with an acceptable hydro-efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of diagnostic and manipulation systems for space-charge dominated electron beams and confined electron plasmas in ELTRAP

Modifications have been implemented in the Penning-Malmberg device ELTRAP aimed at performing studies on the dynamics of space-charge dominated nanosecond electron bunches traveling along the magnetic field. In particular, a Thomson backscattering apparatus has been developed where an infrared (IR) laser pulse collides with the bunched electron beam. The frequency-shifted backscattered radiation, acquired by means of a photomultiplier (PMT), can be exploited to evaluate information on energy, energy spread and density of the bunch. The achievable sensitivity of the diagnostics has been estimated, and valuable information on the main parameters affecting the signal-to-noise (S/N) ratio has been obtained [B. Paroli, F. Cavaliere, M. Cavenago, F. De Luca, M. Ikram, G. Maero, C. Marini, R. Pozzoli, and M. Rome, JINST 7, P01008 (2012)]. A series of upgrades are under way, aimed at increasing the S/N ratio through the use of a new laser for the electron source, the insertion of a stray light shield, and the optimization of the detection electronics. Moreover, electromagnetic simulations relevant to the design and implementation of a microwave heating system are presented. The generation of an electron plasma in ELTRAP by means of a low-power radio frequency (RF) drive in the MHz range applied on one of the trap electrodes and under ultra-high vacuum (UHV) conditions has previously been demonstrated [B. Paroli, F. De Luca, G. Maero, F. Pozzoli, and M. Rome, Plasma Sources Sci. Technol. 19, 045013 (2010)]. The new heating system will allow the extension of the RF studies to the GHz range and in particular the production of a more energetic electron plasma via cyclotron resonant excitation.

43 PARTICLE ACCELERATORS↗

The material dependence of temperature measurement resolution in thermal scanning electron microscopy

Thermal scanning electron microscopy is a recently developed temperature mapping technique based on thermal diffuse scattering in electron backscatter diffraction in a scanning electron microscope. It provides nano-scale and non-contact temperature mapping capabilities. Due to the specific temperature sensitive mechanism inherent to this technique, the temperature resolution is highly material dependent. A thorough investigation of what material properties affect the temperature resolution is important for realizing the inherent temperature resolution limit for each material. In this paper, three material dependent parameters-the Debye-Waller B-factor temperature sensitivity, backscatter yield, and lattice constant-are shown to control the temperature resolution.

36 MATERIALS SCIENCE↗

On the connection of semiclassical instanton theory with Marcus theory for electron transfer in solution

We present a derivation of Marcus theory of electron transfer in solution starting from semiclassical instanton theory. The conventional semiclassical instanton theory provides an inadequate description of the electron transfer process in the inverted Marcus regime. This has been attributed to the lack of backscattering in the product region, which is represented as a semi-infinite continuum of states. For electron transfer processes in condensed phase, the electronic states in the acceptor well are bound, which violates the continuum assumption. We show by detailed analysis of the minimum action path of a model system for electron transfer that the proper tunneling coordinate is a delocalized, 'bead-count' mode. The tunneling mode is analytically continued in the complex plane as in the traditional derivation. Unlike the traditional analysis where the method of steepest descent is used, the tunneling coordinate is treated as a quasi-zero mode. This feature allows including the influence of backscattering in the acceptor well and leads to the recovery of the Marcus formula for the rate of electron transfer. The results have implications on the performance of ring polymer molecular dynamics for the study of electron transfer dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗