Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Aqueous solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The concentration and isotopic composition of hydrogen, carbon and nitrogen in carbonaceous meteorites

Stepwise pyrolysis was used to extract H2, N2 and C from powdered meteorites and from meteorite residues resulting from partial dissolution in aqueous HF or from reaction with HF-HCl solutions. Concentrations and isotopic compositions were determined for the cases of the carbonaceous chondrites Orgueil, Murray, Murchison, Renazzo and Cold Bokkeveld. Acidification of the meteorites removed the organic sources of H2, so that H2 in the HF-HCl acid residues came mostly from the insoluble organic matter making up 70-80% of the total carbon in carbonaceous meteorites. Good correlation is found between delta-D and the concentration of H2 in the acid residues, but no correlation exists between the delta-D, delta-C-13 and delta-N-15 in them. A model is proposed for both the high delta-D values and the relationship between those values and the H2 concentration.

Robert, F.↗
NASA NTRS2003

Porous cobalt spheres for high temperature gradient magnetically assisted fluidized beds

Porous metallic cobalt spheres have been prepared as high temperature capable media for employment in gradient magnetically assisted fluidization and filtration technologies. Cobalt impregnated alginate beads are first formed by extrusion of an aqueous suspension of Co3O4 into a Co(II) chloride solution. The organic polymer is thermally decomposed yielding cobalt oxide spheres, followed by reduction to the metallic state, and densification. Cobalt beads have been produced with porosities ranging between 10 and 50%, depending upon sintering conditions. The product media have been characterized by scanning electron microscopy (SEM), nitrogen adsorption porosimetry, and vibrating sample magnetometry. c2003 Elsevier Science Ltd. All rights reserved.

NASA Discipline Life Support Systems↗
DOE OSTI2023

Layered catalyst structures and methods of making the same

A layered catalyst structure for purifying an exhaust gas stream includes a catalyst support and a palladium catalyst layer including an atomic dispersion of palladium ions electrostatically adsorbed onto an exterior surface of the catalyst support. The catalyst support includes an alumina substrate, a first ceria layer disposed on and extending substantially continuously over the alumina substrate, and a second colloidal ceria layer formed directly on the first ceria layer over the alumina substrate. The palladium catalyst layer is formed on the exterior surface of the catalyst support by applying a palladium-containing precursor solution to the exterior surface of the catalyst support and then heating the catalyst support and the palladium-containing precursor solution. The palladium-containing precursor solution includes a positively charged palladium complex in an aqueous medium and has a pH greater than a point of zero charge of the second colloidal ceria layer.

Gu, Yuntao↗
DOE OSTI2021

Phosgene Neutralization Chemistry for the Explosive Destruction System (EDS)

This report summarizes activities at Sandia National Laboratories as part of the Explosive Destruction System (EDS) Phase 3 (P3) System design. An exploration of chemical neutralization strategies of phosgene was conducted for safe disposal of recovered mortars and M79 1000 lb. bombs filled with carbonyl dichloride "phosgene" or "CG agent" (molecular formula = COCl 2 ). The incumbent strategy utilized aqueous sodium hydroxide was found to be the worst-case scenario, producing enough CO 2 gas that would cause an unacceptable pressure and temperature spike. Several chemical neutralization strategies were evaluated based on criteria set by the operating envelope of the P3 design. In the end, it was determined that a pure solution of N-methyl ethanolamine (MeEA) or 90% monoethanolamine (MEA)(aqueous) provided the best balance reaction profile, cost, and safety.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Application of a Density Law via Python for Aqueous Plutonium Nitrate

A predictive density tool has been developed in Python to reduce bias and uncertainty in nuclear criticality safety calculations for plutonium nitrate systems. The Pitzer Method and an empirical method were implemented into the tool, allowing for plutonium nitrate density calculations. Additionally, the Python tool can generate atom densities for a MCNP6.2 material card using the density from the selected method and directly the densities into a prepared MCNP6 input text file. The material card and density are calculated based on customizable user inputs of plutonium content, nitric acid content, temperature, plutonium isotope weight percentages and impurity concentrations. The Python tool has been validated and verified against the International Handbook of Evaluated Criticality Safety Benchmark Experiments to predict densities within a root mean square error of 1.0% for the Pitzer method and 1.8% for the empirical method. These errors in density were shown to lead to a ±0.5% error in MCNP6.2 calculated k effective for the Pitzer method and a ±1.7% error for the Empirical method. Simultaneous work is also being done at the University of New Mexico and Los Alamos National Laboratory to create a similar tool for plutonium chloride solutions, which aims to provide the accreditation of the chlorine absorption. These capabilities will not only provide more accurate models but also lead the way towards a better understanding of solution systems and potential relaxation in the conservatism of the current aqueous plutonium processing limits.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Homoleptic An(IV) Dimethyl Sulfoxide Complexes of Th–Pu Enable Insight into Solution Speciation and Redox

A family of 8- and 9- coordinate homoleptic dimethyl sulfoxide An(IV) complexes is used to evaluate the solvation properties of tetravalent actinide ions in dimethyl sulfoxide (DMSO) vs aqueous media. These compounds are prepared from aqueous mixtures of DMSO and yield crystalline solids, whose solid-state electronic absorption spectra are compared to solution phase spectra, providing insight into the solution speciation. The thermodynamics of the equilibria between the 8- and 9-coordinate compounds were determined experimentally and computationally, showing a trend that correlates with ionic radius. Cyclic voltammetry data for the +IV/+III couples of Np and Pu in the DMSO electrolyte indicate that the +IV ions are significantly stabilized compared to aqueous media due to the more donating nature of DMSO compared to water. As a result, computational studies of these systems indicate that further reactivity may take place upon reduction to the +III oxidation state.

Actinides↗
NASA NTRS1997

Deuterium Enrichment of Amino and Hydroxy Acids Found in the Murchison Meteorite: Constraints on Parent Body Conditions

The alpha-amino and alpha-hydroxy acids found in the Murchison carbonaceous chondrite are deuterium enriched. These compounds are thought to have originated from common deuterium enriched carbonyl precursors, by way of a Strecker synthesis which took place in a solution of HCN, NH3, and carbonyl compounds during the period of aqueous alteration of the meteorite parent body. However, the hydroxy acids found on Murchison are less deuterium enriched than the amino acids. With the objective of determining if the discrepancy in deuterium enrichment between the amino acids and the hydroxy acids found on Murchison is consistent with their formation in a Strecker synthesis, we have measured the deuterium content of alpha-amino and alpha-hydroxy acids produced in solutions of deuterated carbonyl compounds, KCN and NH4Cl, and also in mixtures of such solutions and Allende dust at 263 K and 295 K. Retention of the isotopic signature of the starting carbonyl by both alpha amino acids and alpha hydroxy acids is more dependent upon temperature, concentration and pH than upon the presence of meteorite dust in the solution. The constraints these observations place on Murchison parent body conditions will be discussed.

Lerner, Narcinda R.↗
NASA NTRS1989

Physical phenomena and the microgravity response

The living biological cell is not a sack of Newtonian fluid containing systems of chemical reactions at equilibrium. It is a kinetically driven system, not a thermodynamically driven system. While the cell as a whole might be considered isothermal, at the scale of individual macromolecular events there is heat generated, and presumably sharp thermal gradients exist at the submicron level. Basic physical phenomena to be considered when exploring the cell's response to inertial acceleration include particle sedimentation, solutal convection, motility electrokinetics, cytoskeletal work, and hydrostatic pressure. Protein crystal growth experiments, for example, illustrate the profound effects of convection currents on macromolecular assembly. Reaction kinetics in the cell vary all the way from diffusion-limited to life-time limited. Transport processes vary from free diffusion, to facilitated and active transmembrane transport, to contractile-protein-driven motility, to crystalline immobilization. At least four physical states of matter exist in the cell: aqueous, non-aqueous, immiscible-aqueous, and solid. Levels of order vary from crystalline to free solution. The relative volumes of these states profoundly influence the cell's response to inertial acceleration. Such subcellular phenomena as stretch-receptor activation, microtubule re-assembly, synaptic junction formation, chemotactic receptor activation, and statolith sedimentation were studied recently with respect to both their basic mechanisms and their responsiveness to inertial acceleration. From such studies a widespread role of cytoskeletal organization is becoming apparent.

Todd, Paul↗
DOE OSTI2024

Reaction path model of the formation of abiotic immiscible hydrocarbon fluids in subducted carbonated serpentinites, Lanzo Massif (Western Italian Alps)

Fluids generated from subducted slabs participate in the cycling of deep carbon in the crust and upper mantle. In these fluids, aqueous carbon species vary in oxidation state between +IV and -IV depending on whether the fluids are oxidizing or reducing, respectively. Most studies of subduction-zone fluids have focused on oxidized carbon species. However, recent studies of natural samples have demonstrated the occurrence of deep, reducing fluids, generated in both subducted oceanic upper mantle and crustal rocks. CH 4 -H 2 -rich fluid inclusions in subducted carbonated serpentinites have demonstrated the existence of abiotic, immiscible, hydrocarbon fluids at upper mantle conditions. To investigate the formation of such immiscible hydrocarbon fluids during the evolution of subducted carbonated serpentinites, we used equilibrium constants from the Deep Earth Water model to carry out predictive chemical mass transfer modeling to simulate the alteration reactions. A novel feature of the models was the inclusion of an immiscible hydrocarbon fluid containing six components (CH 4,f , C 2 H 6,f , C 3 H 8,f , isoC 4 H 10,f , CO 2,f , H 2,f ). This feature enabled prediction of the formation of a separate immiscible fluid in equilibrium with aqueous species and minerals. We developed a predictive reaction path model of invasive H 2,f reacting with carbonated serpentinites and interstitial aqueous fluids for comparison with the natural samples from the Lanzo Massif, western Italian Alps. Over a range of temperatures and pressures, immiscible hydrocarbon fluids formed in association with altered mineral assemblages. Reaction progress caused the transformation of carbonated serpentinites and the formation of clinopyroxene, brucite, graphite, and hydrocarbon fluids, along with changes of pH, logfO 2 , and aqueous species. CH 4,f was the most abundant hydrocarbon species in all the models. The overall results at 2.0 GPa and 400 to 450 °C were consistent with the natural samples from the Lanzo Massif. Interestingly, large amounts of H 2 O formed due to oxidation of H 2 . More hydrocarbons and H 2 O formed in models with lower fluid/rock mass ratios or with more reactant H 2 . Models at different pressure and temperature conditions showed similar results with some variation in the relative stabilities of aragonite, graphite and olivine solid solution, and associated differences in mineral sequences, hydrocarbon fluids, values of aqueous species, and the final log fO 2 and pH. As a result, our models strongly support the laboratory and field evidence that reduction of carbonated serpentinites by infiltrating H 2 fluids can cause the formation of immiscible, abiotic hydrocarbon fluids in subduction zones.

58 GEOSCIENCES↗
DOE OSTI2020

Disulfonamide Ligands as f-Element Extractants from Alkaline High-Level Waste

Almost 100 million gallons of high level waste (HLW) has been generated from defense reprocessing programs to support nuclear weapons production. HLW is currently stored at the Hanford and Savannah River Sites (SRS) [1]. It contains radioactive components, such as {sup 137}Cs, {sup 99}Tc and {sup 90}Sr, as well as large amounts of non-radioactive species, including solvated cations and insoluble metal hydroxides. HLW has high concentration of soluble hydroxides ([OH{sup -}] = 2 M at SRS [2]), complexing inorganic anions ([NO{sub 3}{sup -}] ∼ 0.65 - 3.7 M at SRS [2]) and a high ionic strength. Even though the majority of actinide component in alkaline HLW is precipitated, studies of An(III) and Ln(III) complexation in highly alkaline solutions in the presence of high nitrate concentrations have showed that soluble nitrate complexes can be formed [3]. The current treatment of HLW at SRS currently consists of two processes: The Actinide Removal Process (ARP) and the Next-Generation Caustic-Side Solvent Extraction process (NG-CSSX). Strontium and actinides are removed by sorption on monosodium titanate through the Actinide Removal Process (ARP) commonly referred to as the alpha-strike step [4]. Then, cesium is selectively extracted from the alkaline media via the Caustic-Side Solvent Extraction (CSSX) process [5]. The CSSX solvent consists of a calix[4]arene-crown-6 extractant dissolved in an inert hydrocarbon matrix containing i) a solvent modifier (alkylphenoxy alcohol) which increases extractant solubility and prevents third phase formation, and ii) a suppressor (trioctylamine or guanidine) - that mitigates surfactant effects. The CSSX process removes {sup 137}Cs selectively and rapidly, yet the post- CSSX aqueous stream may still contain high amounts of An, thus requiring a second ARP treatment (referred to as 'alpha-finishing') for some tanks. Despite the success of the ARP process in removing Sr and An, it often represents the kinetic bottleneck of integrated processing, as it is slower than solvent extraction. Understanding the complexation of actinides by organic ligands that are compatible with the CSSX process could eventually lead to a combined caustic-side Cs/Sr/actinide extraction process with better economics due to a reduced amount of monosodium titanate and/or a shorter required contact time with titanate during ARP. This would ensure a low-activity waste (LAW) stream with no actinides without additional ARP processing post-CSSX. Disulfonamides were studied for extraction of Sm(III) from alkaline aqueous media of pH 10-14 into dichloromethane. Up to 82% of Sm(III) was extracted from solutions of pH 12.5 -13.5 and up to 84% from solutions of pH 10.5 - 11.5. These results show some resemblance with Am extraction results by calixarene ligands previously reported [10]. Kinetic studies demonstrated that even 5 min is enough to complete stripping, whereas extraction is time-limiting process and requires up to 20 h for efficient removal of Sm(III) from alkaline aqueous media. Determination of composition of complexes in solution after extraction by the equilibrium shift method showed a 1:1 Sm(III):dsa-2 complexation ratio for the extracted species.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Electroanalytical characterization of Np( VI )/Np( V ) redox in a pentadentate ligand environment and stabilization of [Np V O 2 ] + by hydrogen bonding

The redox chemistry of the actinyl cations (AnO 2 n+ ) heavily influences their reactivity and speciation in solution, but the redox properties of the actinyls in non-aqueous media have received far less attention than they deserve. Here, the non-aqueous electrochemistry of a chemically reversible Np(VI)/Np(V) redox manifold is reported in both protic (CH 3 OH) and aprotic (CH 3 CN) organic media. Using a neutral Np(VI) complex supported by a chelating and strongly donating pentadentate ligand that was fully characterized in prior work, a clean Np(VI)/Np(V) redox couple was found to be accessible under ambient conditions. Coupled electrochemical and spectroscopic studies, as well as simulations of cyclic voltammetry data, confirm the 1e− nature of this couple and establish it to be chemically reversible and nearly electrochemically reversible as well. Bulk electrolysis of a solution of the neutral Np(VI) complex facilitated isolation of the corresponding anionic and monomeric Np(V) species. Data from X-ray diffraction analysis as well as optical and vibrational spectroscopies provide strong evidence in support of metal-centered reduction and the Np(V) oxidation state, findings that are in accord with the measured reduction potentials. Distinctive hydrogen bonding interactions between the terminal (yl) oxo groups and water molecules appear to stabilize the isolated Np(V) species in the solid state, providing insight into the features that afford the uncommon chemically reversible redox encountered in this system.

Mikeska, Emily R.↗
DOE OSTI2026

Ion Distribution and Cation Exchange at Mica–Electrolyte Interfaces Probed with Deep Potential Molecular Dynamics

Here, we investigate the Stern layer structure and cation exchange mechanism at muscovite mica-electrolyte interfaces using nanosecond timescale molecular dynamics simulations based on deep neural network interatomic potentials trained on Density Functional Theory (DFT) data. Focusing on mica with exposed surface K + interfaced with aqueous NaCl and mica with surface Na + interfaced with KCl solution, we find that K + remains predominantly in inner-sphere configurations, while Na + exhibits notable populations in outer-sphere states. Most importantly, our simulations show that contact with an electrolyte solution results in the co-adsorption of multiple cation species, making the mica surface locally overcharged and thus reshaping the cation speciation in a manner that enhances the tendency of neighboring surface cations to desorb. These findings are consistent with recent experimental observations that co-adsorption of different cation species induces changes in cation speciation and slow kinetics of cation exchange at the muscovite-water interface, providing a basis for their detailed understanding.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Complexation of Lanthanides and Heavy Actinides with Aqueous Sulfur-Donating Ligands

The separation of trivalent lanthanides and actinides is challenging because of their similar sizes and charge densities. S-donating extractants have shown significant selectivity for trivalent actinides over lanthanides, with single-stage americium/ lanthanide separation efficiencies for some thiol-based extractants reported at >99.999%. While such separations could transform the nuclear waste management landscape, these systems are often limited by the hydrolytic and radiolytic stability of the extractant. Progress away from thiol-based systems is limited by the poorly understood and complex interactions of these extractants in organic phases, where molecular aggregation and micelle formation obfuscates assessment of the metal–extractant coordination environment. Because S-donating thioethers are generally more resistant to hydrolysis and oxidation and the aqueous phase coordination chemistry is anticipated to lack complications brought on by micelle formation, we have considered three thioethers, 2,2'-thiodiacetic acid (TDA), (2R,5S)- tetrahydrothiophene-2,5-dicarboxylic acid, and 2,5-thiophenedicarboxylic acid (TPA), as possible trivalent actinide selective reagents. Formation constants, extended X-ray absorption fine structure spectroscopy, and computational studies were completed for thioether complexes with a variety of trivalent lanthanides and actinides including Nd, Eu, Tb, Am, Cm, Bk, and Cf. TPA was found to have moderately higher selectivity for the actinides because of its ability to bind actinides in a different manner than lanthanides, but the utility of TPA is limited by poor water solubility and high rigidity. While significant competition with water for the metal center limits the efficacy of aqueous-based thioethers for separations, the characterization of these solution-phase, S-containing lanthanide and actinide complexes is the most comprehensively available in the literature to date. Here, this is due to the breadth of lanthanides and actinides considered as well as the techniques deployed and serves as a platform for the further development of Scontaining reagents for actinide separations. Additionally, this paper reports on the first bond lengths for Cf and Bk with a neutral S donor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

A novel in-situ Raman spectroscopic cell for aqueous geochemistry at the solid–liquid interface

In-situ Raman spectroscopy has the potential to be a powerful technique for monitoring geochemical reactions at a solid–liquid interface in real time. In this article, we present the development and testing of an in-situ Raman spectroscopic cell, which can be used for reaction systems at moderate temperatures and pressure [<1000 psi (6.89 MPa), <100 °C, relevant to subsurface geologic systems] and can hold samples large enough for chemical mapping of heterogeneous rock surfaces. The system is validated by measuring the temperature-dependent conversion of gypsum to calcite over time. Near total conversion of gypsum to calcite on the mineral surface took 29 hours at room temperature and 150 minutes at 100 °C, corresponding to an 11.6-fold increase in the conversion rate. Further, we anticipate that this cell can be an important tool in quantifying the rates of carbon mineralization relevant to geologic carbon sequestration, particularly for the elevated rates recently observed in mafic/ultramafic rocks.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Radiation effects on the structure and alteration behavior of an SiO 2 –Al 2 O 3 –B 2 O 3 –Na 2 O glass

As borosilicate glasses are used in many countries to immobilize fission products and minor actinides after spent fuel reprocessing before storage in a deep geological repository, assessing that their chemical durability is of paramount importance. Here, pristine and preirradiated (952 MeV, 136Xe) SiO 2 –B2O 3 –Al2O 3 –Na 2 O glasses with the same molar ratios as in the French SON68 and ISG glasses have been subjected to aqueous corrosion in deionized water and in silica-saturated solution to measure the initial and longer term alteration rates. Pristine and preirradiated glasses corrode following the same mechanisms, but the preirradiation has a strong impact on the initial dissolution rate (increase by a factor of 5.6), and on the alteration layer depth in silica-saturated conditions (by two- to threefolds). The later result is related to the formation of a more porous, less passivating gel on the preirradiated glass specimen. Using both experimental spectroscopies (NMR, IR, and SFG) and classical molecular dynamics, the radiation effects on the glass structure and water diffusion have been assessed. After preirradiation, the density and the polymerization degree of the glass decrease, whereas the topological disorder increases. In consequence, water diffusion accelerates. These observations allow to correlate the radiation impact on the alteration behavior to the structural changes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

High-Performance Nanoparticle-Mediated Surfaces for Bio-medical Applications

CONCLUSIONS Scalability: could reduce produce cost of nanomaterials for widespread application • Nanomaterials can be produced on macro-scale supports, i.e. metal filters, textile, via solution chemistries • Applications: • Antimicrobial and antiviral applications • Capturing contaminants from aqueous environments • Biocompatibility and Toxicity: safety & long-term effects • Airborne Release Fraction and Respirable Fraction must be considered when moieties released in the atmosphere • Evidence for Bioavailability of Au Nanoparticles from Soil and Biodistribution within Earthworms

Murph, Simona E. [Savannah River National Laborato↗
DOE OSTI2023

Application of an Empirical Density Law via Python for Aqueous Plutonium Chloride Systems in MCNP6

Current aqueous plutonium processing models for criticality safety often contain significant bias due to material modeling assumptions. These solutions include plutonium chloride solutions, which are modeled as fictitious plutonium metal-water mixtures because little is known about the actual density of the solution. Furthermore, there is no current predictive capability for modeling plutonium metal-water mixtures that is approved for use at Los Alamos National Laboratory (LANL). Recent density measurements for aqueous plutonium chloride systems (PuCl 3 -HCl-H 2 O) now allow for the development and application of a more realistic density law. This work develops a Python-based density law for this ternary solution using an empirical method. This code can be used in conjunction with an MCNP6 input to determine the density and composition of a solution based upon user inputs of plutonium concentration, hydrochloric acid concentration, and temperature. The tool allows users to input plutonium and acid content of a solution in terms of molality, molarity, or concentration, and predicts density within the current data range within 1.4% of experimental data. Current preliminary MCNP6 calculations utilizing this tool have demonstrated a minimum decrease in system reactivity of 5% in comparison to the current modeling conventions. Thus, this tool enables more accurate criticality safety operational limits by better crediting chorine content while still maintaining necessary conservatism.

Density Law↗
DOE OSTI2024

Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene–Quinoxaline Polymers

Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (~–5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N'-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (V OC ) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high V OC .

14 SOLAR ENERGY↗