Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstract”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Rapid synthesis of ordered hexagonal mesoporous silica and their incorporation with Ag nanoparticles by solution plasma

Graphical abstract: Overall reactions of mesoporous silica and AgNPs-incorporated mesoporous silica syntheses by solution plasma process (SPP). Highlights: ► SPP for rapid synthesis of mesoporous silica. ► SPP for rapid synthesis of mesoporous silica and AgNPs incorporation. ► Higher surface area and larger pore diameter of mesoporous silica synthesized by SPP. -- Abstract: Rapid synthesis of silica with ordered hexagonal mesopore arrangement was obtained using solution plasma process (SPP) by discharging the mixture of P123 triblock copolymer/TEOS in acid solution. SPP, moreover, was utilized for Ag nanoparticles (AgNPs) incorporation in silica framework as one-batch process using silver nitrate (AgNO{sub 3}) solution as precursor. The turbid silicate gel was clearly observed after discharge for 1 min and the white precipitate formed at 3 min. The mesopore with hexagonal arrangement and AgNPs were observed in mesoporous silica. Two regions of X-ray diffraction patterns (2θ < 2° and 2θ = 35–90°) corresponded to the mesoporous silica and Ag nanocrystal characteristics. Comparing with mesoporous silica prepared by a conventional sol–gel route, surface area and pore diameter of mesoporous silica prepared by solution plasma were observed to be larger. In addition, the increase in Ag loading resulted in the decrease in surface area with insignificant variation in the pore diameter of mesoporous silica. SPP could be successfully utilized not only to enhance gelation time but also to increase surface area and pore diameter of mesoporous silica.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical properties of lithium polymer batteries with doped polyaniline as cathode material

Graphical abstract: -- Abstract: Polyaniline (PANI) was doped with different lithium salts such as LiPF{sub 6} and LiClO{sub 4} and evaluated as cathode-active material for application in room-temperature lithium batteries. The doped PANI was characterized by FTIR and XPS measurements. In the FTIR spectra, the characteristic peaks of PANI are shifted to lower bands as a consequence of doping, and it is more shifted in the case of PANI doped with LiPF{sub 6}. The cathodes prepared using PANI doped with LiPF{sub 6} and LiClO{sub 4} delivered initial discharge capacities of 125 mAh g{sup −1} and 112 mAh g{sup −1} and stable reversible capacities of 114 mAh g{sup −1} and 81 mAh g{sup −1}, respectively, after 10 charge–discharge cycles. The cells were also tested using polymer electrolyte, which delivered highest discharge capacities of 142.6 mAh g{sup −1} and 140 mAh g{sup −1} and stable reversible capacities of 117 mAh g{sup −1} and 122 mAh g{sup −1} for PANI-LiPF{sub 6} and PANI-LiClO{sub 4}, respectively, after 10 cycles. The cathode prepared with LiPF{sub 6} doped PANI shows better cycling performance and stability as compared to the cathode prepared with LiClO{sub 4} doped PANI using both liquid and polymer electrolytes.

36 MATERIALS SCIENCE↗

Template-free hydrothermal derived cobalt oxide nanopowders: Synthesis, characterization, and removal of organic dyes

Graphical abstract: XRD patterns of the products obtained by hydrothermal treatment at 160 °C for 24 h, and at different [Co{sup 2+}]/[CO{sub 3}{sup 2−}] ratios: (a) 1:6, (b) 1:3, (c) 1:1.5, (d) 1:1, (e) 1:0.5. Highlights: ► Spinel cobalt oxide nanoparticles with different morphologies were prepared by hydrothermal approach. ► The optical characteristics of the as-prepared cobalt oxide revealed the presence of two band gaps. ► Adsorption of methylene blue dye on Co{sub 3}O{sub 4} was investigated and the percent uptake was found to be >99% in 24 h. -- Abstract: Pure spinel cobalt oxide nanoparticles were prepared through hydrothermal approach using different counter ions. First, the pure and uniform cobalt carbonate (with particle size of 21.8–29.8 nm) were prepared in high yield (94%) in an autoclave in absence unfriendly organic surfactants or solvents by adjusting different experimental parameters such as: pH, reaction time, temperature, counter ions, and (Co{sup 2+}:CO{sub 3}{sup 2−}) molar ratios. Thence, the spinel Co{sub 3}O{sub 4} (with mean particle size of 30.5–47.35 nm) was produced by thermal decomposition of cobalt carbonate in air at 500 °C for 3 h. The products were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), transmission electron microscope (TEM), scanning electron microscope (SEM), and thermal analysis (TA). Also, the optical characteristics of the as-prepared Co{sub 3}O{sub 4} nanoparticles revealed the presence of two band gaps (1.45–1.47, and 1.83–1.93 eV). Additionally, adsorption of methylene blue dye on Co{sub 3}O{sub 4} nanoparticles was investigated and the uptake% was found to be >99% in 24 h.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent directed fabrication of Bi{sub 2}WO{sub 6} nanostructures with different morphologies: Synthesis and their shape-dependent photocatalytic properties

Graphical abstract: The morphologies of the Bi{sub 2}WO{sub 6} nanostructures can be easily tuned by altering the solvent composition during the reaction, which will yield flower-like, pancake-like and tubular nanostructures, respectively. Highlights: ► The morphologies of Bi{sub 2}WO{sub 6} can be controlled by tuning the solvent composition. ► The effects of solvent on the morphologies of Bi{sub 2}WO{sub 6} were carefully investigated. ► The growth mechanisms for the as-prepared samples were investigated. ► The morphologies of the samples greatly affect their photocatalytic activities. -- Abstract: In this work, Bi{sub 2}WO{sub 6} with complex morphologies, namely, flower-like, pancake-like, and tubular shapes have been controllably synthesized by a facile solvothermal process. The as-obtained samples are systematically investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy (HRTEM). The effects of solvents on the morphologies of Bi{sub 2}WO{sub 6} nanostructures are systematically investigated. According to the time-dependent experiments, a two-step growth mode basing on Ostwald ripening process and self-assembly has been proposed for the formation of the flower-like and pancake-like Bi{sub 2}WO{sub 6} nanostructures. The photocatalytic properties of Bi{sub 2}WO{sub 6} nanostructures are strongly dependent on their shapes, sizes, and structures for the degradation of rhodamine B (RhB) under visible-light irradiation. The deduced reasons for the differences in the photocatalytic activities of these Bi{sub 2}WO{sub 6} nanostructures are further discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical and optical properties of Co{sup 2+}, Ni{sup 2+} doped 20ZnO + xLi{sub 2}O + (30 − x)K{sub 2}O + 50B{sub 2}O{sub 3} (5 ≤ x ≤ 25) glasses: Observation of mixed alkali effect

Graphical abstract: Composition dependence of density and Urbach energy of Co{sup 2+} and Ni{sup 2+} doped ZLKB glasses: (a) Co{sup 2+} doped glasses and (b) Ni{sup 2+} doped glasses. Both are exhibited mixed alkali effect. Highlights: ► Mixed alkali effect is observed. ► Band gap studies indicate that the glasses are structural stable. ► The glasses are observed to be partially covalent in nature. -- Abstract: Co{sup 2+} and Ni{sup 2+} ions doped 20ZnO + xLi{sub 2}O + (30 − x) K{sub 2}O + 50B{sub 2}O{sub 3} (5 ≤ x ≤ 25) mol% glasses are prepared using melt quenching technique. Structural changes of the prepared glasses by addition of transition metal oxides, CoO and NiO are investigated by UV–vis–NIR, FT-IR spectroscopy and XRD. The XRD pattern indicates the amorphous nature of prepared glasses. FT-IR measurements of the all glasses revealed that the network structure of the glasses are mainly based on BO{sub 3} and BO{sub 4} units placed in different structural groups in which the BO{sub 3} units being dominant. The optical absorption spectra suggest the site symmetry of Co{sup 2+} and Ni{sup 2+} ions in the glasses are near octahedral. Crystal field and inter-electronic repulsion parameters are also evaluated. The optical band gap and Urbach energies exhibited the mixed alkali effect. Various physical parameters such as density, refractive index, optical dielectric constant, polaron radius, electronic polarizability and inter-ionic distance are also determined.

36 MATERIALS SCIENCE↗

Characterization and thermal behavior of PrMO{sub 3} (M = Co or Ni) ceramic materials obtained from gelatin

Graphical abstract: The micrograph in figure shows sample calcined at temperature 900 °C. The sample exhibits morphology with considerable porosity and the formation of agglomerated nanometric particles. Gelatin provides the system with a large amount of organic matter, which is then removed during calcinations, favoring the appearance of pores in the material. Highlights: ► Oxides with PrNiO{sub 3} and PrCoO{sub 3} were prepared by new method synthesis. ► The gelatin, through its carboxylate groups and amine, is an efficient director. ► The obtained materials have magnetic properties and application in catalysis. ► The decomposition kinetic study of bonding groups of gelatin with metallic ions that takes part in the synthesis of PrMO{sub 3}. -- Abstract: Metal oxides with perovskite-type structure have attracted considerable interest in recent years due to their magnetic and electrical properties, as well as their catalytic activity. In this study, oxides with PrNiO{sub 3} and PrCoO{sub 3} composition were prepared by using gelatin powder as a precursor agent for its use as a catalyst. The powders obtained were calcined at 700 °C and 900 °C and characterized using the X-ray diffraction, thermal analysis (thermogravimetry and differential thermal analysis), infrared spectroscopy, temperature programed reduction and scanning electron microscopy techniques. Thermogravimetric data using the non-isothermal kinetic models of Flynn and Wall and “Model-free Kinetics” were used to determine the activation energy to study the decomposition kinetics of the ligand groups with system's metallic ions that takes part in the synthesis of PrMO{sub 3} (M = Ni or Co).

36 MATERIALS SCIENCE↗

Facile synthesis and photocatalytic activity of monoclinic BiVO{sub 4} micro/nanostructures with controllable morphologies

Graphical abstract: Display Omitted Highlights: ► BiVO{sub 4} micro/nanostructures have been synthesized by a facile solvothermal method. ► The shapes of BiVO{sub 4} micro/nanostructures can be controlled by tuning the synthetic parameters. ► BiVO{sub 4} nanorods with rectangular cross sections exhibit improved photocatalytic activities. -- Abstract: Monoclinic BiVO{sub 4} (m-BiVO{sub 4}) micro/nanostructures, such as nanorods, nanofibers, bundle-like nanostructures, and porous submicrometer-sized rods, have been successfully synthesized by a facile solvothermal method in an ethylene glycol–water–sodium oleate system. The morphologies and sizes of m-BiVO{sub 4} micro/nanostructures can be controlled by adjusting the synthetic parameters, such as the concentrations of sodium oleate and reaction time. Among them, the synthesized m-BiVO{sub 4} nanorods have rectangular cross sections, and can grow along the [0 0 1] direction, and are enclosed by well-defined facets, such as (0 0 2), (2 4 0), and (2{sup ¯}10), which are distinct from that with circular cross sections. A crystallization-cleavage-disassembly process has been proposed for the formation of m-BiVO{sub 4} nanorods with rectangular cross sections. The photocatalytic activity of m-BiVO{sub 4} nanostructures is affected greatly by the sizes and shapes of m-BiVO{sub 4} nanostructures. Photocatalytic measurements show that the m-BiVO{sub 4} nanorods with rectangular cross sections exhibit higher photocatalytic activities of Rhodamine B in comparison with m-BiVO{sub 4} nanofibers with circular cross-sections and porous submicrometer-sized rods.

36 MATERIALS SCIENCE↗

Rapid sonochemical preparation of shape-selective lead iodide

Graphical abstract: SEM morphologies of various PbI2 products obtained with the iodine concentration of 6.7 g/L and irradiation time of 1 minute at the reaction temperatures of 35 °C (a), 25 °C (b), and 15 °C (c). Highlights: ► PbI{sub 2} with various morphologies were rapidly formed at room temperature. ► We could well control the morphologies of PbI{sub 2} by changing reaction conditions. ► The PbI{sub 2} films could better resist rolling in a liquid media. -- Abstract: Lead iodide (PbI{sub 2}) films/crystals with various nano/micro morphologies (e.g., Nanoflake, block and microrod) were rapidly synthesized by taking advantage of a simple sonochemical method. The PbI{sub 2} crystals with uniform nanoflake structures could be fabricated directly on lead foils with the irradiation time as short as 36 s via interfacial reaction between lead foils and elemental iodine in ethanol at ambient temperature. It was found experimentally that the morphologies of the resulting thin films/crystals could be well controlled by the adjustment of several parameters including irradiation time, reaction solvents, iodine concentration, ultrasonic power, and reaction temperature. Most importantly, the resultant PbI{sub 2} films are stable enough to resist rolling under the drastic ultrasound irradiation in a liquid media. This method is believed to be the fastest way for in situ fabrication of morphology-controlled semiconductor films on various metal substrates for subsequent applications related to the other metal iodide or metal sulfide semiconductor films.

36 MATERIALS SCIENCE↗

Tuning of crystal phase and luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} phosphors

Graphical abstract: The optical properties of Dy{sup 3+} were found to be sensitive to the crystal phase of the as-synthesized Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} phosphors, especially the distinct features of the charge transfer (CT) transition. The mechanism involved was discussed in detail based on the experiments and theoretic calculations. Highlights: ► The crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} was tuned by changing the pH value of the solution in hydrothermal system. ► The optical properties of Dy{sup 3+} were found to be sensitive to the crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+}. ► The mechanisms of different crystal phases affected on the luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were discussed. -- Abstract: The orthorhombic and monoclinic Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were successfully synthesized by a hydrothermal process with a subsequent annealing treatment at 800 °C for 4 h. The crystal phase of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} was controlled as a function of the pH value of the solution. The crystallization and microstructures of the samples were characterized by Powder X-ray diffraction (XRD) and scanning electron micrograph (SEM). Furthermore, the optical properties were investigated by the diffuse reflection, excitation and emission spectra. The mechanisms of different crystal phases affected on the luminescence properties of Gd{sub 2}(MoO{sub 4}){sub 3}:Dy{sup 3+} were discussed. The electric dipole–dipole interaction between Dy{sup 3+} ions was identified as the main mechanism for the concentration quenching of the two structures. Finally, the chromatic natures of all the samples were analyzed in detail. The results indicate that the orthorhombic phosphor Gd{sub 1.84}(MoO{sub 4}){sub 3}:Dy{sub 0.16}{sup 3+} can be considered as a suitable candidate for white light emitting diodes (W-LEDs).

36 MATERIALS SCIENCE↗

Preparation of MgH{sub 2} composite with a composition of 40%MgH{sub 2} + 30%LiBH{sub 4} + 30%(2LiBH{sub 4} + MgF{sub 2})

Graphical abstract: Hydrogen content vs. desorption time curves for consecutive 1st desorptions of 40 wt%MgH{sub 2} + 30 wt%LiBH{sub 4} + 30 wt%(2LiBH{sub 4} + MgF{sub 2}) at 533–873 K. Highlights: ► Addition of MgF{sub 2} and LiBH{sub 4} with a higher hydrogen storage capacity to MgH{sub 2}. ► Preparation of 40%MgH{sub 2} + 30%LiBH{sub 4} + 30% (2LiBH{sub 4} + MgF{sub 2}) composite. ► Examination of desorption properties of the composite. ► Total desorbed hydrogen quantity for consecutive 1st desorptions of 7.07 wt%. ► Reactions of LiBH{sub 4} → LiH + B + (3/2)H{sub 2}, and 2LiBH{sub 4} + MgF{sub 2} → 2LiF + MgB{sub 2} + 4H{sub 2}. -- Abstract: A mixture of containing two chemical equivalents of lithium borohyride and one equivalent of magnesium fluoride is known to yield hydrogen in an amount of about 7.6 wt% of the mixture when heated to about 150 °C at atmospheric pressure by the following reaction; 2LiBH{sub 4} + MgF{sub 2} = 2LiF + MgB{sub 2} + 4H{sub 2}. In order to increase hydrogen storage capacity of Mg-based materials, a mixture with a composition of 2LiBH{sub 4} + MgF{sub 2} and LiBH{sub 4}with a higher hydrogen storage capacity of 18.4 wt% were added to MgH{sub 2}. MgH{sub 2} composite with a composition of 40 wt%MgH{sub 2} + 30 wt%LiBH{sub 4} + 30 wt%(2LiBH{sub 4} + MgF{sub 2}) was prepared by reactive mechanical grinding. The hydrogen storage properties of the sample were then examined. Hydrogen content vs. desorption time curves for consecutive 1st desorptions of 40 wt%MgH{sub 2} + 30 wt%LiBH{sub 4} + 30 wt%(2LiBH{sub 4} + MgF{sub 2}) at 533–873 K showed that the total desorbed hydrogen quantity for consecutive 1st desorptions is 7.07 wt%.

36 MATERIALS SCIENCE↗

Fast synthesis, formation mechanism, and control of shell thickness of CuS–polystyrene core–shell microspheres

Graphical abstract: Core–shell structure PSt/CuS were prepared using polystyrene which were modified by 3-methacryloxypropyltrimethoxysilane as template. The coating thickness of CuS can be controlled by the amount of 3-methacryloxypropyltrimethoxysilane and the UV–vis absorption intensity of PSt/CuS composite also changed with the coating thickness of CuS. Highlights: ► Core–shell structure PSt/CuS were prepared using silanol-modified polystyrene microspheres as template. ► The coating thickness of core–shell structure PSt/CuS can be controlled by a simple method. ► The UV–vis absorption intensity of PSt/CuS composite also changed with the coating thickness of CuS. -- Abstract: The silanol-modified polystyrene microspheres were prepared through dispersion polymerization. Then copper sulfide particles were grown on silanol-modified polystyrene through sonochemical deposition in an aqueous bath containing copper acetate and sulfide, released through the hydrolysis of thioacetamide. The resulting particles were continuous and uniform as characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Fourier transform infrared, thermogravimetric analysis and UV–vis absorption spectroscopy were used to characterize the structure and properties of core–shell particles. The results showed the coating thickness of CuS shell can be controlled by the amount of silanol and the UV–vis absorption intensity of PSt/CuS composite also changed with the coating thickness of CuS.

36 MATERIALS SCIENCE↗

Octahedral iron phosphate hydroxide microcrystals: Fast microwave-hydrothermal preparation, influencing factors and the shape evolution

Graphical abstract: Octahedral Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} microcrystals have been successfully prepared by a microwave-assisted hydrothermal route at 170 °C for 20 min. The morphology of Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} could be tuned by the Na{sub 2}SO{sub 3}/HAc molar ratio. Highlights: ► Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} octahedra had been hydrothermally prepared under the microwave assistance. ► The morphology of the final product could be tuned by the original molar ratio of Na{sub 2}SO{sub 3}/HAc. ► Low or high temperatures were unfavorable for the formation of Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} octahedra. ► The time-dependent shape evolution of the final product was investigated. -- Abstract: Octahedral Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} microcrystals have been successfully prepared by a microwave-assisted hydrothermal route at 170 °C for 20 min, employing FeCl{sub 3}·6H{sub 2}O and NaH{sub 2}PO{sub 4}·2H{sub 2}O as the starting materials in the presence of proper amounts of Na{sub 2}SO{sub 3} and acetic acid (HAc). The phase and morphology of the as-prepared product were characterized by means of powder X-ray diffraction (XRD), energy dispersive spectrometry (EDS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Some factors influencing the formation of octahedral Fe{sub 4}(PO{sub 4}){sub 3}(OH){sub 3} microcrystals were systematically investigated, including the reaction temperature, time, and the molar ratio of Na{sub 2}SO{sub 3}/HAc.

36 MATERIALS SCIENCE↗

One-step synthesis of Fe–N–S-tri-doped TiO{sub 2} catalyst and its enhanced visible light photocatalytic activity

Graphical abstract: FeNS-TiO{sub 2} exhibits stronger SPS response than that of pure TiO{sub 2}, indicating that the FeNS-TiO{sub 2} should have a higher separation rates of photoinduced charge carriers. Further, for the sample FeNS-TiO{sub 2} a broad shoulder SPS response can be seen at the wavelength range from 390 to 550 nm, suggesting that the light absorption in visible region of FeNS-TiO{sub 2} was greatly improved, which is beneficial to the enhancement of photocatalytic activity. Display Omitted Highlights: ► FeNS-TiO{sub 2} catalyst has been synthesized in the presence of ammonium ferrous sulfate. ► The light absorption edge of FeNS-TiO{sub 2} catalyst was red-shifted to visible region. ► The separation efficiency of photoinduced charge carriers of FeNS-TiO{sub 2} was improved. ► The activity enhanced mechanism of FeNS-TiO{sub 2} was discussed in detail. -- Abstract: Fe–N–S-tridoped TiO{sub 2} was synthesized through simple one step sol–gel reactions in the presence of ammonium ferrous sulfate. The resulting materials were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, diffuse reflectance spectrum and surface photovoltage spectroscopy. Results revealed that Fe and S were incorporated into the lattice of TiO{sub 2} by substituting for some Ti atoms and N for O atoms in the lattice of TiO{sub 2}. Tri-doping with Fe, N and S could inhibit the phase transformation of TiO{sub 2} from anatase to rutile, restrain the growth of crystallite sizes, extended the light absorption into the visible region and separate photoinduced charge carriers. The visible photocatalytic activity of Fe–N–S-tridoped TiO{sub 2} was higher than that of N-TiO{sub 2} and P25 TiO{sub 2}. The enhanced photocatalytic activity was attributed to the small crystallite size, high crystallinity, the intense light absorption in visible region, narrow band gap and high separation efficiency of photoinduced charge carriers.

36 MATERIALS SCIENCE↗

Investigation on growth, structural, optical, thermal, dielectric and mechanical properties of organic L-prolinium trichloroacetate single crystals

Graphical abstract: L-Prolinium trichloroacetate is an organic nonlinear optical crystal has been grown from the aqueous solution by slow evaporation solution growth technique. Single crystal X-ray diffraction analysis reveals that L-PTCA crystallizes in trigonal crystal system. The optical band gab is found to be 4.26 eV. Second harmonic conversion efficiency of L-PTCA has been found to be half that of KDP. Highlights: ► It deals with the synthesis, growth and characterization of L-PTCA an organic NLO crystal. ► Wide optical transparency window between 260 nm and 1100 nm. ► Thermal study reveals that the grown crystal is stable up to 127 °C. ► L-PTCA crystal exhibits the second order nonlinear optical properties. -- Abstract: A new organic nonlinear optical material L-prolinium trichloroacetate (L-PTCA) single crystal has been synthesized and grown by slow solvent evaporation technique at room temperature using water as solvent. Single-crystal X-ray diffractometer was utilized to measure unit cell parameters and to confirm lattice parameter. The powder X-ray diffraction pattern of the grown L-PTCA has been indexed. The modes of vibration of different molecular groups present in the sample were identified by the FTIR spectral analysis. The optical transmittance window and the lower cutoff wavelength of the L-PTCA have been identified by UV–vis–NIR studies. Thermal stability of the L-prolinium trichloroacetate was determined by TGA/DTA measurements. Dielectric measurements were carried out at various temperatures at frequency range 10–1 MHz. The mechanical properties of the grown crystals have been analyzed by Vickers microhardness method. The chemical etching studies were carried out on the grown crystals. Its SHG efficiency has been tested by Kurtz powder method.

36 MATERIALS SCIENCE↗

La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders prepared by the hydrothermal method

Graphical abstract: LRTEM image of the single-phase La{sub 0.5}Sr{sub 0.5}TiO{sub 3} particles. It is seen from the figure that the product has a plate-like morphology with average particles sizes in the range of 100–300 nm. In addition, the SAED data taken from an individual particle (lower inset) shows the presence of sharp diffraction rings, which are indicative of polycrystalline La{sub 0.5}Sr{sub 0.5}TiO{sub 3} formation. The high-resolution TEM image (upper inset) shows for further confirmation of a crystalline structure of La{sub 0.5}Sr{sub 0.5}TiO{sub 3} powder. This image shows a clearly resolved crystalline domain with uniform interplanar spacing of 0.276 nm. Highlights: ► La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowder is prepared in 2 M KOH solution by hydrothermal method. ► The solution is heat treated at 220 °C for 24 h in air. ► LRTEM reveals a plate-like morphology of particle with average size of 100–300 nm. ► HRTEM image shows a crystalline domain with interplanar spacing of 0.276 nm. -- Abstract: La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders were prepared by the hydrothermal method. The influence of processing parameters, including KOH concentration, reaction temperature and reaction time on the obtained products were studied. The structure and morphology of the obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD results show that pure phase La{sub 0.5}Sr{sub 0.5}TiO{sub 3} nanopowders can be successfully synthesized with 2 M KOH concentration at a low temperature of 220 °C for 24 h. In addition, the product has a plate-like shape with particle sizes in the range of 25–100 nm as estimated by TEM.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combustion synthesized TiO{sub 2} for enhanced photocatalytic activity under the direct sunlight-optimization of titanylnitrate synthesis

Graphical abstract: Effect of oxidant on the combustion synthesis of TiO{sub 2} has been studied by preparing titanylnitrate in four different ways from Ti(IV) iso-propoxide. It is observed that oxidant preparation method has a significant effect on physico-chemical as well as photocatalytic properties of TiO{sub 2}. All the catalysts showed excellent photocatalytic activity than Degussa P-25 under direct sunlight for the degradation of a textile dye (methylene blue), without the need of external light sources, oxygen supply and reactor systems. Highlights: ► Optimized synthesis of titanylnitrate. ► Influence of titanylnitrate synthesis on the physico-chemical properties of TiO{sub 2} prepared by combustion synthesis. ► Development of highly efficient TiO{sub 2} photocatalysts those are active under the direct sunlight in open atmosphere. ► Degradation of the textile dye (methylene blue) under direct sunlight. -- Abstract: Optimized synthesis of Ti-precursor ‘titanylnitrate’ for one step combustion synthesis of N- and C-doped TiO{sub 2} catalysts were reported and characterized by using powder X-ray diffraction (XRD), transmission electron microscopy (TEM), diffused reflectance UV–vis spectroscopy, N{sub 2} adsorption and X-ray photoelectron spectroscopy (XPS). XRD confirmed the formation of TiO{sub 2} anatase and nano-crystallite size which was further confirmed by TEM. UV-DRS confirmed the decrease in the band gap to less than 3.0 eV, which was assigned due to the presence of C and N in the framework of TiO{sub 2} as confirmed by X-ray photoelectron spectroscopy. Degradation of methylene blue in aqueous solution under the direct sunlight was carried out and typical results indicated the better performance of the synthesized catalysts than Degussa P-25.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlled synthesis and optical properties of BaFBr:Eu{sup 2+} crystals via ethanol/water solutions

Graphical abstract: A facile and cost-effective approach for the controlled synthesis of BaFBr:Eu{sup 2+} crystals is introduced. The structures and morphologies of the obtained products are affected by the amount of water and ethanol in the solvent mixtures. Highlights: ► Precipitation route for preparing BaFBr nano and micro crystals in water/ethanol solvent mixtures. ► Controlled growth of BaFBr nano crystals by tuning the volume ratio of Ethanol/water. ► Luminescence properties after annealing at 200 °C are investigated. ► Short lifetimes of photoluminescence and photostimulated luminescence in BaFBr:Eu{sup 2+} nano crystals are presented. ► Shortened lifetimes in BaFBr:Eu{sup 2+} nano crystals demonstrate that they are promising materials for use in X-ray imaging systems. -- Abstract: BaFBr:Eu{sup 2+} crystals with different structures were successfully fabricated via a simple precipitation method using ethanol/water mixtures as solvents. The amount of ethanol in the solvent mixtures played a significant role in the formation of final products, enabling the well-controlled growth of the BaFBr crystals. A possible formation mechanism was proposed based on the results of controlled experiments. The phases and morphologies of the resulting samples were systematically investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), selected area electron diffraction (SAED) and elementary analysis. The optical properties of the annealed BaFBr:Eu{sup 2+} nano-cuboids were investigated using photoluminescence (PL), photo-stimulated luminescence spectroscopy (PSL) and kinetic decays. Faster decay behaviors demonstrate that these BaFBr:Eu{sup 2+} phosphors are promising materials for applications in optical storage fields. Furthermore, it is envisaged that this environmentally benign method can be extended to prepare other fluoride halides.

36 MATERIALS SCIENCE↗

Synthesis, structural characterization and Mössbauer study of LnV{sub 0.5}Fe{sub 0.5}O{sub 3} perovskites (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er)

Graphical abstract: Mössbauer spectra taken at 200 K for the Y(V{sub 0.5}Fe{sub 0.5})O{sub 3} orthoferrivanadate synthesized by arc-melting. Highlights: ► LnFe{sub 0.5}V{sub 0.5}O{sub 3} were synthesized by the first time for most of the rare-earth elements. ► These orthoferrivanadates crystallize metastably with the perovskite structure. ► Iron and vanadium are trivalent stabilized in these solid solutions. ► The Mössbauer quadrupolar splitting is correlated with the tolerance factor. ► Below 100 K, these perovskites undergo a crystallographic phase transformation. -- Abstract: Perovskites LnV{sub 0.5}Fe{sub 0.5}O{sub 3} (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho and Er) were synthesized by rapid solidification from arc-melted samples and characterized by the study of their crystal structure and hyperfine properties. These metastable solid solutions crystallized in the Pbnm symmetry, with the iron and vanadium cations randomly distributed in the transition metal octahedral sites. Depending on the lanthanide present at the A site of the perovskite, iron is present with two valences (i.e., Fe{sup 3+} and Fe{sup 2+}). The volume of the unit cell for these perovskites increases linearly with the lanthanide ionic radius, as the perovskite approaches its ideal structure. At room temperature, the quadrupolar splitting of the trivalent paramagnetic Mössbauer component works as an indirect measurement for the Goldshmidt tolerance factor. Close to or below 100 K, these perovskites undergo a crystallographic phase transformation, probably due to orbital ordering of the V{sup 3+} cations, originating two different magnetic iron sites.

36 MATERIALS SCIENCE↗