Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AIRFOILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Numerical design of shockless airfoils

An attempt is made to indicate and briefly discuss only the most significant achievements of the research. The most successful contribution from the contract was the code for two dimensional analysis of airfoils in transonic flow.

Garabedian, P. R.↗

Airfoil cooling hole plugging by combustion gas impurities of the type found in coal derived fuels

The plugging of airfoil cooling holes by typical coal-derived fuel impurities was evaluated using doped combustion gases in an atmospheric pressure burner rig. Very high specific cooling air mass flow rates reduced or eliminated plugging. The amount of flow needed was a function of the composition of the deposit. It appears that plugging of film-cooled holes may be a problem for gas turbines burning coal-derived fuels.

Deadmore, D. L.↗

Effects of turbulence on laminar separation on aerodynamic surfaces such as airfoils and compressor blading

Activities report include (1) completion of measurements of turbulence amplification in flow about a circular cylinder; (2) initiation of the measurements of turbulence characteristics in flow about a single symmetric airfoil; and, (3) further examination of various matching numerical methods. Emphasis is placed on the experimental program conducted to obtain data on the amplification of the oncoming turbulence and its management.

Sadeh, W. Z.↗

Some new airfoils

A computer approach to the design and analysis of airfoils and some common problems concerning laminar separation bubbles at different lift coefficients are briefly discussed. Examples of application to ultralight airplanes, canards, and sailplanes with flaps are given.

Eppler, R.↗

Multi-element airfoil viscous-inviscid interactions

Subsonic viscous-inviscid interactions for multi-element airfoils are predicted by iterating between inviscid and viscous solutions until the performance coefficients converge. Inviscid flow is modelled by using distributed source-vortex singularities on configuration surface panels. Viscous effects are calculated by an existing laminar separation bubble model and a NASA-Lockheed boundary layer-wake method. Numerical formulations and example calculations are presented.

Gross, L. W.↗

Transonic flow about a two-dimensional airfoil inviscid and turbulent flow properties.

Flow-field measurements are presented for a symmetrical NACA 64A010 airfoil section at transonic conditions. Measurements were obtained for three angles of attack with the free-stream Mach number fixed at 0.8. The cases studied included a weak shock wave/boundary layer interaction, an interaction of medium strength with mild separation, and an interaction of sufficient strength to produce a shock-induced stall situation. Two nonintrusive optical techniques, laser velocimetry and holographic interferometry, were used to characterize the flows. The results include Mach number contours and flow angle distributions in the inviscid flow regions, and turbulent flow properties, including the turbulent Reynolds stresses, of the upper surface viscous layers, and of the near-wake. The turbulent flow measurements reveal that the turbulence fluctuations attain equilibrium with the local mean flow much faster than previously expected.

Johnson, D. A.↗

On the laminar separation, transition, and turbulent reattachment of low Reynolds number flows near the leading edge of airfoils

The laminar separation, transition, and turbulent reattachment near the leading edge of a cylindrical nose-constant thickness airfoil model were investigated using a low turbulence, low speed smoke wind tunnel. The locations of separation, transition, and reattachment were obtained from smoke flow photographs and surface oil flow techniques for chord Reynolds numbers from about 150,000 to 470,000. These visual data combined with static pressure distributions and lift and drag measurements delineate the effects of angle of attack, flap deflection angle, and chord Reynolds number on the separation bubble characteristics. The data concerning the length of the laminar and turbulent portions of the bubble agree with the empirical prediction methods for short bubbles.

Arena, A. V.↗

Computation of aerodynamic interference effects on oscillating airfoils with controls in ventilated subsonic wind tunnels

Lift interference effects are discussed based on Bland's (1968) integral equation. A mathematical existence theory is utilized for which convergence of the numerical method has been proved for general (square-integrable) downwashes. Airloads are computed using orthogonal airfoil polynomial pairs in conjunction with a collocation method which is numerically equivalent to Galerkin's method and complex least squares. Convergence exhibits exponentially decreasing error with the number n of collocation points for smooth downwashes, whereas errors are proportional to 1/n for discontinuous downwashes. The latter can be reduced to 1/n to the m+1 power with mth-order Richardson extrapolation (by using m = 2, hundredfold error reductions were obtained with only a 13% increase of computer time). Numerical results are presented showing acoustic resonance, as well as the effect of Mach number, ventilation, height-to-chord ratio, and mode shape on wind-tunnel interference. Excellent agreement with experiment is obtained in steady flow, and good agreement is obtained for unsteady flow.

Fromme, J. A.↗

A visual investigation of the separation and subsequent transition near the leading edge of airfoils

Subsonic (5 to 30 m/sec) wind tunnels were used to measure pressure distributions at the leading edge and upper surface of airfoil models and to obtain high-speed movie photographs of smoke-visualized separation, transition, and reattachment phenomena. Points of turbulent shear layer reattachment could be determined by using an oil-mixture coating on the surface. Plots of the static pressure coefficient along the chord of several models are presented, and the measured separation, transition, and reattachment points are plotted against the chord Reynolds number.

Arena, A. V.↗

Applications of Laplace transform methods to airfoil motion and stability calculations

This paper reviews the development of generalized unsteady aerodynamic theory and presents a derivation of the generalized Possio integral equation. Numerical calculations resolve questions concerning subsonic indicial lift functions and demonstrate the generation of Kutta waves at high values of reduced frequency, subsonic Mach number, or both. The use of rational function approximations of unsteady aerodynamic loads in aeroelastic stability calculations is reviewed, and a reformulation of the matrix Pade approximation technique is given. Numerical examples of flutter boundary calculations for a wing which is to be flight tested are given. Finally, a simplified aerodynamic model of transonic flow is used to study the stability of an airfoil exposed to supersonic and subsonic flow regions.

Edwards, J. W.↗

The significance of wing end configuration in airfoil design for civil aviation aircraft

Lift-dependent induced drag in commercial aviation aircraft is discussed, with emphasis on the necessary compromises between wing and configuration modifications which better lift performance and the weight gains accompanying such modifications. Triangular, rectangular and elliptical configurations for wing ends are considered; attention is also given to airfoil designs incorporating winglets. Water tunnel tests of several configurations are reported. In addition, applications of wing and modifications to advanced technology commercial aviation aircraft and the Airbus A-300 are mentioned.

Zimmer, H.↗

A comparison of the pitching and plunging response of an oscillating airfoil

An oscillating SC1095 airfoil model was tested for its aerodynamic stability in a rigid body with a single degree of freedom pitch about its quarter chord, and also in a rigid body with single degree of freedom plunge. The ability of pitching data to model plunging motions was evaluated. A one to one correspondence was established between pairs of pitching and plunging motions according to the potential flow transformation formula alpha=ikh. The imposed variables of the experiment were mean incidence angle, amplitude of motion, free stream velocity, and oscillatory frequency. Results indicate that significant differences exist between the aerodynamic responses to the motions, particularly at high load conditions. At high load conditions, the normal force for equivalent pitch is significantly greater than that for true pitch at the geometric incidence angle.

Carta, F. O.↗

An investigation of several factors involved in a finite difference procedure for analyzing the transonic flow about harmonically oscillating airfoils and wings

Analytical and empirical studies of a finite difference method for the solution of the transonic flow about harmonically oscillating wings and airfoils are presented. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady equations for small disturbances. Since sinusoidal motion is assumed, the unsteady equation is independent of time. Three finite difference investigations are discussed including a new operator for mesh points with supersonic flow, the effects on relaxation solution convergence of adding a viscosity term to the original differential equation, and an alternate and relatively simple downstream boundary condition. A method is developed which uses a finite difference procedure over a limited inner region and an approximate analytical procedure for the remaining outer region. Two investigations concerned with three-dimensional flow are presented. The first is the development of an oblique coordinate system for swept and tapered wings. The second derives the additional terms required to make row relaxation solutions converge when mixed flow is present. A finite span flutter analysis procedure is described using the two-dimensional unsteady transonic program with a full three-dimensional steady velocity potential.

Ehlers, F. E.↗

A users guide for A344: A program using a finite difference method to analyze transonic flow over oscillating airfoils

The design and usage of a pilot program for calculating the pressure distributions over harmonically oscillating airfoils in transonic flow are described. The procedure used is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equations for small disturbances. The steady velocity potential which must be obtained from some other program, was required for input. The unsteady equation, as solved, is linear with spatially varying coefficients. Since sinusoidal motion was assumed, time was not a variable. The numerical solution was obtained through a finite difference formulation and either a line relaxation or an out of core direct solution method.

Weatherill, W. H.↗

A flight investigation of blade section aerodynamics for a helicopter main rotor having NLR-1T airfoil sections

A flight investigation was conducted using a teetering-rotor AH-1G helicopter to obtain data on the aerodynamic behavior of main-rotor blades with the NLR-1T blade section. The data system recorded blade-section aerodynamic pressures at 90 percent rotor radius as well as vehicle flight state, performance, and loads. The test envelope included hover, forward flight, and collective-fixed maneuvers. Data were obtained on apparent blade-vortex interactions, negative lift on the advancing blade in high-speed flight and wake interactions in hover. In many cases, good agreement was achieved between chordwise pressure distributions predicted by airfoil theory and flight data with no apparent indications of blade-vortex interactions.

Morris, C. E. K., Jr.↗

A finite element method for the computation of transonic flow past airfoils

A finite element method for the computation of the transonic flow with shocks past airfoils is presented using the artificial viscosity concept for the local supersonic regime. Generally, the classic element types do not meet the accuracy requirements of advanced numerical aerodynamics requiring special attention to the choice of an appropriate element. A series of computed pressure distributions exhibits the usefulness of the method.

Eberle, A.↗

Experimental Study of Airfoil Trailing Edge Noise: Instrumentation, Methodology and Initial Results

The mechanisms of aerodynamic noise generation at the trailing edge of an airfoil is investigated. Instrumentation was designed, a miniature semiconductor strain-gauge pressure transducer and associated electronic amplifier circuitry were designed and tested and digital signal analysis techniques applied to gain insight into the relationship between the dynamic pressure close to the trailing edge and the sound in the acoustic far-field. Attempts are made to verify some trailing-edge noise generation characteristics as theoretically predicted by several contemporary acousticians. It is found that the noise detected in the far-field is comprised of the sum of many uncorrelated emissions radiating from the vicinity of the trailing edge. These emissions appear to be the result of acoustic energy radiation which has been converted by the trailing-edge noise mechanism from the dynamic fluid energy of independent streamwise 'strips' of the turbulent boundary layer flow.

Manley, M. B.↗