Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADVANCED NETWORKING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85

Efficient bidirectional quantum frequency conversion between telecom and visible bands using adaptively phase-matched III-V nanophotonic waveguides

Quantum frequency conversion (QFC) is essential for interfacing quantum systems operating at different wavelengths and for realizing scalable quantum networks. Despite extensive progress, achieving QFC with simultaneous high efficiency, low pump power, minimal noise, broad bandwidth, and pump-wavelength flexibility remains challenging. Here, we demonstrate efficient, low-noise, and bidirectional QFC between the telecom (1550-nm) and visible (780-nm) bands using unpoled indium gallium phosphide (InGaP) χ (2) nanophotonic waveguides, eliminating the need for a long-wavelength pump. Leveraging the large nonlinear susceptibility of InGaP together with adaptive phase-matching control, we obtain 27% (55%) internal efficiency in a 6-mm (2.5-mm)-long waveguide with a low pump power of 20 mW (50 mW) and a noise flux spectral density of 10 −4 counts per second per hertz at signal–pump detuning of 20 nm. These results mark a significant advance in integrated nonlinear photonics for high-performance QFC, facilitating the development of versatile and scalable quantum networks.

Hu, Jierui [Univ. of Illinois at Urbana-Champaign,↗

Smarter Grid Solutions | National Renewable Energy Laboratory: Active Management Integration: June 2015 - November 2016

This report presents the project results for the NREL INTEGRATE demonstration project: Active Network Management (ANM) Integration. Consistent with the INTEGRATE program's objective of increasing the grid's clean energy hosting capacity and providing grid services in a holistic manner, the project demonstrated the use of ANM to enable very high penetrations of solar PV and wind energy systems. Results obtained using a representative North American distribution system showed ANM's autonomous distributed control doubled the interconnected wind and solar systems by managing thermal and voltage constraints in real-time. These generators flexibly interconnected to the grid via ANM's end-to-end control architecture, and were managed and coordinated with other smart distributed energy resources (DER; e.g. EVs, battery ESS, controllable load) to unlock the grid's dynamic hosting capacity. As a smart grid application to standardize grid integration of diverse renewable generation sources, ANM provides the industry with a scalable, cost-effective alternative to traditional transmission and distribution (T&D) reinforcements. This project considered three use cases of the application of ANM: a Smart Home demonstration of ANM control of residential scale devices (PV, EV, and battery ESS); a Smart Campus demonstration of high penetration megawatt-scale DER (PV, EVs, battery ESS, and controllable load) behind a single point-of-common-coupling (PCC), and a Smart Distribution demonstration that combined prior use cases along with additional community/utility-scale DER at very high aggregate penetration levels. The Smart Distribution use case provided an integrated perspective of ANM across all distribution grid DER device scales (incorporating aggregated Smart Homes and the Smart Campus) in order to showcase how these devices can support smart grid services to manage DER related constraints in a safe and reliable manner; and likewise how ANM integrates with grid modernization initiatives. The ANM system was deployed in NREL's Energy Systems Integration Facility (ESIF), and project industry advisors attended an on-site demonstration and a set of workshops in order to review project outcomes and evaluate the relevance of ANM for increasing the grid hosting capacity. The outcomes of this effort include an assessment of opportunities for field deployment of ANM to address existing interconnection challenges, as well as consolidating project advisor suggestions for investment in ANM and potential future pilots for more advanced schemes.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Advance Local Mobility Through Energy Efficient Mobility Systems Technologies

Everyone deserves reliable, affordable, and safe transportation to connect people to jobs, healthcare, education, and recreation. Our transportation systems are interconnected, multimodal networks working together to move people and goods. These systems are dynamic and are being reshaped by factors such as population trends, new technologies, shifting labor models, economic forces, and changing climate. Energy efficient mobility systems (EEMS) technologies can help transportation planners ensure changes in our transportation systems are equitable and sustainable by improving energy efficiency, travel time, and affordability, as well as overall access to mobility. Transportation planners and decision makers can use the following EEMS tools and strategies to advance local mobility.

ADVANCED PROPULSION SYSTEMS↗

Neural Network Analysis of Nuclear Magnetic Resonance and Infrared Spectra

Nuclear magnetic resonance (NMR) spectroscopy and infrared (IR) spectroscopy are powerful chemical characterization techniques with broad general usage. However, the manual evaluation of the resulting spectra is time-consuming and requires significant expertise, preventing insights from being used in real-time applications. With recent advances in computation and artificial intelligence (AI), new tools are available for automating spectral interpretation. In this work, machine learning (ML) algorithms using 1-dimensional convolutional neural networks (CNNs) were applied to identify common functional groups from spectral information. Raw spectra were collected virtually from the Human Metabolome Database (HMDB) and National Institute of Standards and Technology (NIST) Chemistry WebBook and processed into a suitable standard. Algorithm design was tailored to best fit the nature of the problem, with built-in flexibility to accommodate relevant parameters beyond the raw spectral input, specifically solvent identity and magnetic frequency for NMR. The predictive capability of the algorithm in identifying functional groups is displayed in several examples. This methodology has been compiled into a code repository and could easily be modified to adapt alternative data sources, including other spectrum types. To mitigate overfitting, a common problem in mathematical modeling where overfamiliarity with training data produces trends that are not representative of the general data, a novel metric was developed, referred to as Accufit. Accufit includes a parameter that penalizes substantial differences in the training accuracy and the accuracy of an independent validation set. Examples are presented showing the effectiveness of Accufit in maintaining the model’s predictive capability while controlling the overfitting when used as a custom metric for hyperparameter tuning.

Sturgill, James↗

Impacts of Integrating Topology Reconfiguration and Vehicle-to-Grid Technologies on Distribution System Operation

Autonomous electric vehicles (AEVs) provide unique opportunities to cope with the uncertainties of distributed energy generation in distribution networks. But the effects are limited by both inherent radial topology and the behaviors of decentralized AEVs. As such, we investigate the potential benefits of dynamic distribution network reconfiguration (DDNR), taking into account AEVs' spatial-temporal availability and their charging demand. We propose a mixed integer programming model to optimally coordinate the charging/discharging of AEVs with DDNR, while satisfying AEVs' original travel plan. Numerical studies based on a test system overlaying the IEEE 33-node test feeder and Sioux Falls transportation network show that DDNR and AEV complement each other, which improves the operation of the distribution system. We also conduct sensitivity analyses on inputs including renewable fluctuation and AEVs penetration level.

33 ADVANCED PROPULSION SYSTEMS↗

Aggregated Residential Load Modeling Using Dynamic Bayesian Networks

Abstract—It is already obvious that the future power grid will have to address higher demand for power and energy, and to incorporate renewable resources of different energy generation patterns. Demand response (DR) schemes could successfully be used to manage and balance power supply and demand under operating conditions of the future power grid. To achieve that, more advanced tools for DR management of operations and planning are necessary that can estimate the available capacity from DR resources. In this research, a Dynamic Bayesian Network (DBN) is derived, trained, and tested that can model aggregated load of Heating, Ventilation, and Air Conditioning (HVAC) systems. DBNs can provide flexible and powerful tools for both operations and planing, due to their unique analytical capabilities. The DBN model accuracy and flexibility of use is demonstrated by testing the model under different operational scenarios.

Bayesian↗

Medium-Range River Flood Forecasts Using a Long Short-Term Memory Network

River flooding and the impacts are a concern for decision makers throughout the United States. Accurate medium-range forecasts (~3-7 days) are critical for providing advanced outlooks to emergency management officials. Unfortunately, accurately forecasting rainfall-runoff and the subsequent rise and fall within rivers remain a challenge in hydrological modeling. While complex physical modeling systems are the standard for representing the hydrological processes, they are computationally demanding and can require extensive calibration. Further, uncertainties remain in the model parameters and input data. The use of machine learning can reduce some of the computational demand while maintaining high accuracy. Therefore, this project makes use of a Long Short-Term Memory (LSTM) network which explicitly accounts for the time-dependent nature of rainfall-runoff modeling. The developed LSTM was trained to predict river gauge height, or stage height, based on time-lagged input features which include: gauge height to initialize the model, the NASA Short-term Prediction Research and Transition Center’s instance of the Land Information System (SPoRT-LIS) relative soil moisture to describe the rainfall infiltration rate, and 6-hr Multi-Radar Multi-Sensor quantitative precipitation estimate (MRMS QPE). The developed LSTM based system is then used to produce 7-day forecasts with a 6-hr temporal resolution using three different quantitative precipitation forecasts (QPF) from the NWS’s Weather Prediction Center (WPC), the NCEP Global Forecast System (GFS) model and the National Blend of Models (NBM). This trained modeling system has been implemented as an experimental product at over 100 different rivers in collaboration with at multiple National Weather Service (NWS) Forecast Offices and River Forecast Centers (RFC) across the eastern half of the United States. The developed LSTM model achieved average Nash-Sutcliffe efficiency (NSE) 0.89 higher than the equivalent medium-range National Water Model ensemble member forecast over a 7-day forecast. In addition to the initial development and evaluation, this project has continued to expand. While the initial model was developed for precipitation dominated basins, expansion of the project has taken it to basins effected by snow melt. This presentation will provide an overview of the project with focus on recent developments on incorporating snow melt processes into the model.

Andrew T. White↗

Hydrological partitioning in the critical zone: Recent advances and opportunities for developing transferable understanding of water cycle dynamics

Here, hydrology is an integrative discipline linking the broad array of water–related research with physical, ecological, and social sciences. The increasing breadth of hydrological research, often where subdisciplines of hydrology partner with related sciences, reflects the central importance of water to environmental science, while highlighting the fractured nature of the discipline itself. This lack of coordination among hydrologic subdisciplines has hindered the development of hydrologic theory and integrated models capable of predicting hydrologic partitioning across time and space. The recent development of the concept of the critical zone (CZ), an open system extending from the top of the canopy to the base of groundwater, brings together multiple hydrological subdisciplines with related physical and ecological sciences. Observations obtained by CZ researchers provide a diverse range of complementary process and structural data to evaluate both conceptual and numerical models. Consequently, a cross–site focus on “critical zone hydrology” has potential to advance the discipline of hydrology and to facilitate the transition of CZ observatories into a research network with immediate societal relevance. Here we review recent work in catchment hydrology and hydrochemistry, hydrogeology, and ecohydrology that highlights a common knowledge gap in how precipitation is partitioned in the critical zone: “how is the amount, routing, and residence time of water in the subsurface related to the biogeophysical structure of the CZ?” Addressing this question will require coordination among hydrologic subdisciplines and interfacing sciences, and catalyze rapid progress in understanding current CZ structure and predicting how climate and land cover changes will affect hydrologic partitioning.

58 GEOSCIENCES↗

PET waste- and bio-derived imine vitrimers for shape-memory, intrinsic flame-retardant, and recyclable carbon fiber composites

Developing circular multifunctional vitrimers and carbon fiber–reinforced polymers (CFRPs) that are simultaneously recyclable, mechanically robust, and intrinsically flame retardant remains a major challenge. Here, in this study, we report multifunctional vitrimers and their carbon fiber–reinforced vitrimer (CFRV) composites, where the vitrimer design integrates closed-loop recyclability, enhanced interfacial adhesion, and intrinsic flame retardancy within a single materials platform. The vitrimer matrix is synthesized from post-consumer polyethylene terephthalate (PET) waste and a vanillin-derived phosphorus-containing crosslinker, forming an imine-based network. The resulting vitrimer resin exhibits high tensile strength, thermal healability, repeated reprocessability, programmable shape memory, and rapid chemical depolymerization under mild conditions. Amine-functionalized carbon fibers significantly improve fiber–matrix interfacial bonding, yielding CFRVs with tensile strengths up to 789 MPa and complete recovery of structurally intact fibers after chemical recycling. The phosphorus-rich aromatic network further imparts intrinsic flame retardancy, enabling self-extinguishing behavior without external additives. This work advances a materials design paradigm for next-generation multifunctional, sustainable vitrimers and CFRVs, while simultaneously addressing the recycling challenges associated with both plastic and CFRP waste.

Bio-derived crosslinker↗

Ni nanoparticles embedded into cross-linked NiO nanoflakes as enhanced cathode for alkaline batteries

Highlights: • Ni/NiO arrays prepared by hydrothermal synthesis and electrodeposition methods. • Ni/NiO nanoflake arrays show high capacity for alkaline batteries. • Introducing Ni to the NiO nanoflake is favorable for fast electron transfer. - Abstract: Construction of metal/metal oxide composite arrays is highly important for developing advanced electrochemical energy devices. In this work, we report a facile electrodeposition method to embed Ni network into hydrothermal NiO nanoflake arrays. Ni nanoparticles of 10–25 nm are intimately integrated with NiO nanoflakes of 20–30 nm forming cross-linked Ni/NiO composite arrays. The electrochemical potentials of Ni/NiO composite arrays are explored as cathode of alkaline batteries by means of galvanostatic charge/discharge tests and cyclic voltammograms (CV) in KOH solution. Compared with the unmodified NiO nanoflake arrays, the Ni/NiO composite arrays show much better electrochemical properties with higher capacity (100 mAh g{sup −1} vs. 75 mAh g{sup −1} at 2 A g{sup −1}), enhanced cycling life (capacity retention: 96% vs. 82%) after 3800 cycles and improved high-rate capability. The introduction of Ni nanoparticles not only improves the electrical conductivity, but also acts as anchors to fasten the active nanoflakes to achieve long-term cycles.

36 MATERIALS SCIENCE↗

Cell-Free Gene Expression: Methods and Applications

Cell-free gene expression (CFE) systems empower synthetic biologists to build biological molecules and processes outside of living intact cells. The foundational principle is that precise, complex biomolecular transformations can be conducted in purified enzyme or crude cell lysate systems. This concept circumvents mechanisms that have evolved to facilitate species survival, bypasses limitations on molecular transport across the cell wall, and provides a significant departure from traditional, cell-based processes that rely on microscopic cellular “reactors.” In addition, cell-free systems are inherently distributable through freeze-drying, which allows simple distribution before rehydration at the point-of-use. Furthermore, as cell-free systems are nonliving, they provide built-in safeguards for biocontainment without the constraints attendant on genetically modified organisms. These features have led to a significant increase in the development and use of CFE systems over the past two decades. Here, we discuss recent advances in CFE systems and highlight how they are transforming efforts to build cells, control genetic networks, and manufacture biobased products.

59 BASIC BIOLOGICAL SCIENCES↗

Atomistic Insights into Nitrogen-Cycle Electrochemistry: A Combined DFT and Kinetic Monte Carlo Analysis of NO Electrochemical Reduction on Pt(100)

Electrocatalytic denitrification is a promising technology for the removal of NOx species in groundwater. However, a lack of understanding of the molecular pathways that control the overpotential and product distribution have limited the development of practical electrocatalysts, and additional atomic-level insights are needed to advance this field. Adsorbed NO has been identified as a key intermediate in the NOx electroreduction network, and the elementary steps by which it decomposes to NH4+, N2, NH3OH+, or N2O remain a subject of debate. Herein, we report a combined density functional theory (DFT) and kinetic Monte Carlo (kMC) study of this reaction on Pt(100), a catalytic surface that is known to be suitable for the activation of strong covalent bonds, in acidic electrolytes. This approach describes the effects of coverage-dependent adsorbate–adsorbate interactions, water-mediated protonation kinetics and thermodynamics, and transient potential sweeps, on reaction rates and selectivities. The results predict NO stripping curves in excellent agreement with experiments while, at the same time, providing a mechanistic interpretation of observed current peaks. Furthermore, production of NH4+ products is traced to the rapid kinetics of N–O bond breaking in reactive intermediates, whereas rapid hydrogenation of surface N* species prevent competing pathways from forming either N2 or N2O. The combined DFT-kMC methodology thus provides a unique tool to describe the mechanism and energetics of platinum-catalyzed electroreduction in the nitrogen cycle, and this approach should also find application to related electrocatalytic processes that are of technological and environmental interest.

Chun, Hee-Joon↗

Deep Learning for Semantic Segmentation of Defects in Advanced STEM Images of Steels

Crystalline materials exhibit long-range ordered lattice unit, within which resides nonperiodic structural features called defects. These crystallographic defects play a vital role in determining the physical and mechanical properties of a wide range of material systems. While computer vision has demonstrated success in recognizing feature patterns in images with well defined contrast, automated identification of nanometer scale crystallographic defects in electron micrographs governed by complex contrast mechanism is still a challenging task. Here, building upon an advanced defect imaging mode that offers high feature clarity, we introduce DefectSegNet - a new convolutional neural network (CNN) architecture that performs semantic segmentation of three common crystallographic defects in structural alloys: dislocation lines, precipitates and voids. Results from supervised training of a small set of high-quality defect images of steels show high pixel-wise accuracy across all three types of defects: 91.60 ± 1.77% on dislocations, 93.39 ± 1.00% on precipitates, and 98.85 ± 0.56% on voids. We discuss the sources of uncertainties in CNN prediction, and the training data in terms of feature density, representation and homogeneity and their effects on deep learning performance. Further defect quantification using DefectSegNet prediction outperforms human expert average, presenting a promising new workflow for fast and statistically meaningful quantification of materials defects.

36 MATERIALS SCIENCE↗

High-throughput Single-Cell Proteomics and Transcriptomics from the Same Cells with a Nanoliter-Scale Spin-Transfer Approach

Single-cell multiomic platforms provide a comprehensive snapshot of cellular states and cell types by offering critical insights into the spatiotemporal regulation of biomolecular networks at a systems level, thereby defining the basis of multicellularity. Here, we introduce nanoSPINS, an advanced platform that enables high-throughput profiling and integrative analysis of the transcriptome and proteome from the same single cells using RNA sequencing and isobaric labeling LC-MS-based proteomics, respectively. NanoSPINS can efficiently transfer mRNA-containing droplets across two microarrays via a centrifugation-based approach, while proteins are retained on the initial platform. Benchmarking of nanoSPINS on two cell lines demonstrates its ability to generate global proteomic and transcriptomic profiles that align well with previously established methodologies/platforms. The incorporation of isobaric TMTpro labeling into this single-cell multiomics platform significantly enhances the throughput of single-cell proteomic analyses. Through the high-throughput quantification of the proteome and transcriptome, nanoSPINS not only facilitates the identification of molecular features at both mRNA and protein level but also provides larger sample sizes for improved statistical power in clustering and differential abundance. Given the broad applicability of single-cell multiomics in biological research and clinical settings, we believe nanoSPINS represents a powerful platform for the characterization of heterogeneous cell populations.

multi 'omics↗

Initial testing of Alfvén eigenmode feedback control with machine-learning observers on DIII-D

A first of its kind fully data-driven system has been developed and implemented into the DIII-D plasma control system to detect and control Alfvén eigenmodes (AE) in real-time. Susceptibility to fast ion-induced AE is a challenge in fully non-inductive tokamak operation, which significantly reduces fast-particle confinement and results in degraded fusion gain. Controlling AEs in real-time to improve fast-ion confinement is, hence, important for future advanced tokamak fusion reactors. The models were implemented and tested in experiments which showed that neural networks (NN) are highly effective in detecting 5 types of AE (BAE, EAE, LFM, RSAE, TAE) using high resolution ECE. To estimate the neutron deficit, a NN has been trained that outputs the classical neutron rate using similar inputs to NUBEAM. Also a preliminary ML-based proportional control has been designed and gone through initial testing in experiment to use feedback-control on the neutral beam power to achieve desired amplitude of AE modes and neutron deficits. The effect of AEs on fast-ion confinement is measured by analysing the gap in classical neutron rate from the proposed NN-based NUBEAM and the measured neutron rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

GW190521: A Binary Black Hole Merger with a Total Mass of 150 M ⊙

On May 21, 2019 at 03:02:29 UTC Advanced LIGO and Advanced Virgo observed a short duration gravitational-wave signal, GW190521, with a three-detector network signal-to-noise ratio of 14.7, and an estimated false-alarm rate of 1 in 4900 yr using a search sensitive to generic transients. If GW190521 is from a quasicircular binary inspiral, then the detected signal is consistent with the merger of two black holes with masses of 8 5 - 14 + 21 M ⊙ and 6 6 - 18 + 17 M ⊙ (90% credible intervals). We infer that the primary black hole mass lies within the gap produced by (pulsational) pair-instability supernova processes, with only a 0.32% probability of being below 65 M ⊙ . We calculate the mass of the remnant to be 14 2 - 16 + 28 M ⊙ , which can be considered an intermediate mass black hole (IMBH). The luminosity distance of the source is 5.3 - 2.6 + 2.4 Gpc , corresponding to a redshift of 0.82 - 0.34 + 0.28 . The inferred rate of mergers similar to GW190521 is 0.13 - 0.11 + 0.30 Gpc - 3 yr - 1 .

79 ASTRONOMY AND ASTROPHYSICS↗

Machine learning–based extreme event attribution

The observed increase in extreme weather has prompted recent methodological advances in extreme event attribution. We propose a machine learning–based approach that uses convolutional neural networks to create dynamically consistent counterfactual versions of historical extreme events under different levels of global mean temperature (GMT). We apply this technique to one recent extreme heat event (southcentral North America 2023) and several historical events that have been previously analyzed using established attribution methods. We estimate that temperatures during the southcentral North America event were 1.18° to 1.42°C warmer because of global warming and that similar events will occur 0.14 to 0.60 times per year at 2.0°C above preindustrial levels of GMT. Additionally, we find that the learned relationships between daily temperature and GMT are influenced by the seasonality of the forced temperature response and the daily meteorological conditions. Our results broadly agree with other attribution techniques, suggesting that machine learning can be used to perform rapid, low-cost attribution of extreme events.

54 ENVIRONMENTAL SCIENCES↗