Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Disordered hydrogen adsorption at the three-fold site of W(110)

Hydrogen often forms disordered phases on metals; however, deciphering the atomic-scale behavior requires experimental and modeling techniques that directly probe the short-range order between neighboring hydrogen adsorbates. Here, to address this challenge, we applied direct recoil spectroscopy (DRS) to investigate hydrogen adsorption on the W(110) surface. We show that the recoiled hydrogen flux measured during DRS is sensitive to the short range order of the adsorbed hydrogen. Ordered hydrogen neighbors are much more efficient at dechanneling incident ions along low-index surface channels, strongly suppressing the recoiled hydrogen flux along these directions. By modeling the DRS measurements with molecular dynamics for ordered and disordered hydrogen phases, we find that at a hydrogen surface coverage of approximately Θ = 0.6, the hydrogen adsorbates are bound to three-fold sites in a disordered phase at room temperature. This finding is consistent with transfer-matrix scaling model calculations that suggest the transition to an ordered hydrogen phase occurs at a greater surface coverage of Θ = 0.83.

08 HYDROGEN↗
DOE OSTI2022

Nitrogen plasma passivated niobium resonators for superconducting quantum circuits

Microwave loss in niobium metallic structures used for superconducting quantum circuits is limited by a native surface oxide layer formed over a timescale of minutes when exposed to an ambient environment. Here, in this work, we show that nitrogen plasma treatment forms a niobium nitride layer at the metal–air interface, which prevents such oxidation. X-ray photoelectron spectroscopy confirms the doping of nitrogen more than 5 nm into the surface and a suppressed oxygen presence. This passivation remains stable after aging for 15 days in an ambient environment. Cryogenic microwave characterization shows an average filling-factor-adjusted two-level-system loss tangent Fδ TLS of (2.9±0.5)·10 –7 for resonators with a 3 μm center strip and (1.0±0.3)·10 –7 for a 20 μm center strip, exceeding the performance of unpassivated samples by a factor of four.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Gapless Dirac surface states in the antiferromagnetic topological insulator MnBi 2 Te 4

We used angle-resolved photoemission spectroscopy (ARPES) and density functional theory calculations to study the electronic properties of MnBi 2 Te 4 , a material that was predicted to be an intrinsic antiferromagnetic (AFM) topological insulator. In striking contrast to earlier literature showing a full gap opening between two surface band manifolds on the (0001) surface, we observed a gapless Dirac surface state with a Dirac point sitting at E B = -280 meV . Furthermore, our ARPES data revealed the existence of a second Dirac cone sitting closer to the Fermi level. Surprisingly, these surface states remain intact across the AFM transition. The presence of gapless Dirac states in this material may be caused by different ordering at the surface from the bulk or weaker magnetic coupling between the bulk and surface. Whereas the surface Dirac cones seem to be remarkably insensitive to the AFM ordering most likely due to weak coupling to magnetism, we did observe a splitting of the bulk band accompanying the AFM transition. Finally, with a moderately high ordering temperature and interesting gapless Dirac surface states, MnBi 2 Te 4 provides a unique platform for studying the interplay between magnetic ordering and topology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1983

Surface acoustic wave/silicon monolithic sensor/processor

A new technique for sputter deposition of piezoelectric zinc oxide (ZnO) is described. An argon-ion milling system was converted to sputter zinc oxide films in an oxygen atmosphere using a pure zinc oxide target. Piezoelectric films were grown on silicon dioxide and silicon dioxide overlayed with gold. The sputtered films were evaluated using surface acoustic wave measurements, X-ray diffraction, scanning electron microscopy, Auger electron spectroscopy, and resistivity measurements. The effect of the sputtering conditions on the film quality and the result of post-deposition annealing are discussed. The application of these films to the generation of surface acoustic waves is also discussed.

Kowel, S. T.↗
DOE OSTI2024

Observation of orbital selective charge transfer in a Fe/BaTi⁢O 3 interfacial two-dimensional electron gas

Two-dimensional electron gas (2DEG) states at oxide interfaces between two ferroic materials have been fertile ground to realize controllable multiferroicity. Here, in this work, we investigate the 2DEG states at the interface of ferroelectric BaTi⁢O 3 and a magnetic layer of iron using angle-resolved photoemission spectroscopy. Orbital-selective charge transfer occurs on the surprisingly robust 2DEG. Based on first-principles calculations, we show how the interfacial hybridization can give rise to the unexpected charge transfer in the magnetic 2DEG. Our study reveals a close interplay on a 2DEG between magnetic and ferroelectric interfaces, which sheds light on future design principles of multiferroic 2DEG states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts

We demonstrate nearly a microsecond of spin coherence in Er 3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce 3+ at the nanocrystal surface, which likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Above-threshold multiphoton photoemission from noble metal surfaces

Exciting solids with intense femtosecond laser pulses prompts electrons of the interrogated material to respond in a highly nonlinear manner, as is evident in the emission of high-order harmonic radiation and photoelectrons with kinetic energies well above that of the driving photons. Such high-field interactions can be resolved, for example, in above-threshold multiphoton photoemission (ATP) spectroscopy. In this work, we interrogate the nonlinear photoelectric responses of the pristine copper, silver, and gold noble metal surfaces in (111) and (100) crystal orientations in the perturbative regime. Using multiphoton photoemission spectroscopy (mPP) excited by finely tuned optical fields, we characterize enhancement of the mPP and ATP yields from (111) surfaces in selected k||-momentum ranges when the occupied Shockley surface (SS) states are (near-)resonantly coupled by multiphoton transitions to image potential (IP) intermediate states in the excitation process. The ATP signal from the IP states of (111) surfaces is largely defined by their formation through polarization of SS electrons; this observation is contrasted with ATP experiments from the Ag(100) surface, for which the SS becomes an unoccupied resonance and the IP states can only be excited from bands with significantly more bulk character. In addition, based on the optical power and nonlinear order-dependent mPP spectra, we provide evidence for ATP being a one-step, rather than a sequential process, as previously postulated.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Dehydration Pathway Study of Ultrathin Ni (OH) 2 Probed via In Situ X-Ray Photoelectron Spectromicroscopy

In this work, the conversion of ultrathin 2D-Ni (OH) 2 to NiO is studied using in situ X-ray absorption near edge spectroscopy at the Ni L 3 and O K edges and using variable photon energy X-ray photoelectron spectroscopy at the Ni 2p 3/2 and O 1s edges. The Ni L 3 X-ray absorption spectroscopy and corresponding 2p 3/2 X-ray photoelectron spectroscopy show the oxidation state of the Ni atom to be Ni 2+ in the course of the reaction; however, the film surface and oxygen defect structure show the presence of a large metallic Ni component before the complete disappearance of the hydroxide phase indicating oxygen vacancy formation before the completion of water desorption. O 1s spectral changes during heat treatment under ultrahigh vacuum, O 2 dosing, and H 2 O dosing suggest the spectral features are due to water desorption and adsorption. Furthermore, by comparing the relative probe depths of X-ray photoelectron spectroscopy and X-ray absorption spectroscopy, it is determined that the surface, at each step in the dehydration process, consists of a combination of Ni, NiO, and Ni (OH) 2 phases, which each contain a mixture of adsorbed hydroxyl groups. Repeated dosing with H 2 O, studied with O 1s X-ray photoelectron spectroscopy, suggests that the dissociation of water facilitates the formation of oxygen vacancies.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Composition of the Moon as Determined from Orbit by Gamma-Ray Spectroscopy

A spacecraft placed in a planetary orbit of suitably high inclination will pass over all or most of the planet's surface in a matter of several weeks to months. The quite prodigious scientific potential of planetary orbiters lies in coupling this comprehensive coverage with observing systems capable of gathering data on properties that include elemental and mineralogic composition, exogenic and endogenic surface alterations, thermal balance, gravity, topography, stratigraphy, albedo and magnetism.

gramma-ray spectroscopy↗
DOE OSTI2025

Surface Phase Stability of Fe 2 O 3 (001) in Hydrogen Reducing Environments: A DFT and XPS Analysis

Here, this study combines density functional theory (DFT) and ab initio thermodynamics calculations with X-ray photoelectron spectroscopy (XPS) investigations to identify the reduction properties of the Fe 2 O 3 (001) surface with implications for corrosion resistance, hydrogen transport, and energy safety. Ab initio thermodynamics modeling predicts fully hydroxylated surface stability across a broad range of pressures (1 × 10 –23 to 1 × 10 5 mbar) and temperatures below 700 K, consistent with previous experimental studies. Above 800 K, exposures to 1 × 10 –4 mbar H 2 , 1 × 10 –4 mbar O 2 , or 1 × 10 –4 mbar H 2 + 1 × 10 –4 mbar O 2 each yield unique XPS signals indicating a loss of −OH coverage, aligning with DFT predictions. Insight into the mechanism of reduction as a function of H 2 exposure is provided, as well as conditions that promote further reduction toward Fe 3 O 4 . Theoretical and experimental investigations indicate the ability to maintain the Fe 2 O 3 protective layer of iron oxides that have been exposed to H 2 environments by including trace amounts of aqueous O2.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Topological surface states of semimetal TaSb 2

Topological surface states, protected by the global symmetry of the materials, are the keys to understanding various novel electrical, magnetic, and optical properties. TaSb 2 is a newly discovered topological material with unique transport phenomena, including negative magnetoresistance and resistivity plateau, whose microscopic understanding is yet to be reached. In this study, we investigate the electronic band structure of TaSb 2 using angle-resolved photoemission spectroscopy and density functional theory. Our analyses reveal distinct bulk and surface states in TaSb 2 , providing direct evidence of its topological nature. Notably, surface states predominate the electronic contribution near the Fermi level, while bulk bands are mostly located at higher binding energies. Our study underlines the importance of systematic investigations into the electronic structures of topological materials, offering insights into their fundamental properties and potential applications in future technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ni Nanoparticles on CeO 2 (111): Energetics, Electron Transfer, and Structure by Ni Adsorption Calorimetry, Spectroscopies, and Density Functional Theory

The morphology, interfacial bonding energetics and charge transfer of Ni clusters and nanoparticles on slightly-reduced CeO 2-x (111) surfaces at 100 to 300 K have been studied using single crystal adsorption calorimetry (SCAC), low-energy ion scattering spectroscopy (LEIS), Xray photoelectron spectroscopy (XPS), low energy electron diffraction (LEED) and density functional theory (DFT). The initial heat of adsorption of Ni vapor decreased with the extent of pre-reduction (x) of the CeO 2-x (111), showing that stoichiometric ceria adsorbs Ni more strongly than oxygen vacancies. On CeO 1.95 (111) at 300 K, the heat dropped quickly with coverage in the first 0.1 ML, attributed to nucleation of Ni clusters on stoichiometric steps, followed by the Ni particles spreading onto less favorable terrace sites. At 100 K, the clusters nucleate on terraces due to slower diffusion. Adsorbed Ni monomers are in the +2 oxidation state, and they bind by ~45 kJ/mol more strongly to step sites than terraces. The measured heat of adsorption versus average particle size on terraces is favorably compared to DFT calculations. The Ce 3d XPS lineshape showed an increase in Ce 3+ /Ce 4+ ratio with Ni coverage, providing the number of electrons donated to the ceria per Ni atom. The charge transferred per Ni is initially large but strongly decreases with increasing cluster size for both experiments and DFT, and shows large differences between clusters at steps versus terraces. This charge is localized on the interfacial Ni and Ce atoms in their atomic layers closest to the interface. This knowledge is crucial to understanding the nature of the active sites on the surface of Ni-CeO 2 catalysts for which metal-oxide interactions play a very important role in the activation of O-H and C-H bonds. In conclusion, the changes in these interactions with Ni particle size (metal loading) and the extent of reduction of the ceria help to explain how previously reported catalytic activity and selectivity change with these same structural details.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Dynamic Nanocrystal-Ligand Boundaries: Reversible Photoinduced Ligand Detachment from Quantum Dots in Solution

The porosity of ligand shells of colloidal quantum dots (QDs) can influence the overall rate and yield of charge transfer processes occurring at their surfaces. However, the density of ligand shells on QDs can also influence their colloidal and photochemical stability. We used time-resolved infrared spectroscopy to show that photoinduced ligand detachment, the tendency for certain ligands to detach from QD surfaces when the nanocrystals are promoted to their excitonic excited states, can be used to transiently enhance the porosity of oleic acidpassivated CdSe QDs in solution. Furthermore, we synthesized CdSe QDs with varying ligand shell densities to examine the corresponding influence that van der Waals interactions among ligands have on the yield of photoinduced ligand detachment and the time scale on which ligands return to QD surfaces. We observed that oleic acid ligands on CdSe QDs with lower shell densities have a higher probability of escape for longer periods of time. Despite this, oleic acid ligands on fully passivated CdSe QDs are still able to photodetach, resulting in a transient increase of their ligand shell porosity. In contrast, QDs with multilayer ligand coronas exhibit negligible photoinduced ligand detachment because the outer molecular layers introduce a type of cage effect, preventing the escape of the interior ligands. Our findings suggest the intriguing possibility that photoinduced ligand detachment can be used to transiently decrease the density of ligand shells of QDs to facilitate charge transfer processes while still allowing them to be fully passivated between excitation events for photochemical and colloidal stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Surface electron modulation of metal oxide‐based electrochemical devices by surface additives—linking sensors and fuel cells

Abstract The interaction between ambient oxygen and the metal oxide surface is central to various electrochemical devices. Solid oxide fuel cell cathodes and semiconducting metal oxide gas sensors are two prominent examples. Parallels between these two systems are highlighted in this perspective. In both cases, the presence of foreign surface species has been found to significantly alter the interactions of the metal oxides’ surfaces with oxygen. On the one hand, interactions are hindered due to the presence of certain impurities, such as the degradation of fuel cell cathode by Si‐species that originate from processing or from operating environments. On the other hand, electrochemically active noble metal additives have been intentionally used to tune the sensor response of metal oxides. In the case of electrochemically active additives, the need for operando spectroscopies to elucidate the mechanism is discussed. Electronic coupling of the surface additive with the metal oxide is found to play a central role in both cases. We use these results to demonstrate that insights gained from either field can be effectively applied to the other.

Materials Science↗
NASA NTRS1971

Photovoltage inversion effect and its application to semiconductor surface studies: CdS.

Experimental results on the surface states of the basal plane of CdS are presented and discussed in the light of a model of the photovoltage inversion effect. It is found that the surface states associated with this effect are in poor communication with the bulk and under normal conditions may require long periods of time to reach equilibrium. A combination of photovoltage inversion, photovoltage quenching, and photovoltage spectroscopy is believed to constitute a very effective tool for the study of surfaces of wide energy gap semiconductors.

Lagowski, J.↗
NASA NTRS2006

Nano-interconnection for microelectronics and polymers with benzo-triazole

Benzo-Triazole (BTA) is considered as an important bridging material that can connect an organic polymer to the metal electrode on silicon wafers as a part of the microelectronics fabrication technology. We report a detailed process of surface induced 3-D polymerization of BTA on the Cu electrode material which was measured with the Ultraviolet Photoemission Spectroscopy (UPS), X-ray Photoemission Spectroscopy (XPS), and Scanning Tunneling Microscope (STM). The electric utilization of shield and chain polymerization of BTA on Cu surface is contemplated in this study.

Park, Yeonjoon↗