Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Limex'87 ice surface characteristics and their effect upon C-band SAR sigantures

Ice surface characterization data were recorded during March 1987 in the Labrador Sea marginal ice zone, at the onset of spring melt. Measured data are used as input parameters in a simple scattering model to simulate the effects of temporal variations in material properties upon C-band scattering signatures. Snow moisture and surface roughness have a significant effect upon sigma(0)HH and large differences are predicted between undeformed floe surfaces and deformed or rubbled ice areas. The model reproduces a calibrated synthetic-aperture-radar (SAR)-derived signature obtained during the experiment with a reasonable degree of certainty. Predictions also simulate a trend observed in SAR images of increasing backscatter contrast between deformed and undeformed ice over period of surface warming.

Drinkwater, Mark R.↗

Effects of Iris Surface Curvature on Iris Recognition

To focus on objects at various distances, the lens of the eye must change shape to adjust its refractive power. This change in lens shape causes a change in the shape of the iris surface which can be measured by examining the curvature of the iris. This work isolates the variable of iris curvature in the recognition process and shows that differences in iris curvature degrade matching ability. To our knowledge, no other work has examined the effects of varying iris curvature on matching ability. To examine this degradation, we conduct a matching experiment across pairs of images with varying degrees of iris curvature differences. The results show a statistically signi cant degradation in matching ability. Finally, the real world impact of these ndings is discussed

Thompson, Joseph T↗

Remote effects of Tibetan Plateau spring land temperature on global subseasonal to seasonal precipitation prediction and comparison with effects of sea surface temperature: the GEWEX/LS4P Phase I experiment

The prediction skill for precipitation anomalies in late spring and summer months—a significant component of extreme climate events—has remained stubbornly low for years. This paper presents a new idea that utilizes information on boreal spring land surface temperature/subsurface temperature (LST/SUBT) anomalies over the Tibetan Plateau (TP) to improve prediction of subsequent summer droughts/floods over several regions over the world, East Asia and North America in particular. The work was performed in the framework of the GEWEX/LS4P Phase I (LS4P-I) experiment, which focused on whether the TP LST/SUBT provides an additional source for subseasonal-to-seasonal (S2S) predictability. The summer 2003, when there were severe drought/flood over the southern/northern part of the Yangtze River basin, respectively, has been selected as the focus case. With the newly developed LST/SUBT initialization method, the observed surface temperature anomaly over the TP has been partially produced by the LS4P-I model ensemble mean, and 8 hotspot regions in the world were identified where June precipitation is significantly associated with anomalies of May TP land temperature. Consideration of the TP LST/SUBT effect has produced about 25–50% of observed precipitation anomalies in most hotspot regions. The multiple models have shown more consistency in the hotspot regions along the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train. The mechanisms for the LST/SUBT effect on the 2003 drought over the southern part of the Yangtze River Basin are discussed. For comparison, the global SST effect has also been tested and 6 regions with significant SST effects were identified in the 2003 case, explaining about 25–50% of precipitation anomalies over most of these regions. This study suggests that the TP LST/SUBT effect is a first-order source of S2S precipitation predictability, and hence it is comparable to that of the SST effect. With the completion of the LS4P-I, the LS4P-II has been launched and the LS4P-II protocol is briefly presented.

54 ENVIRONMENTAL SCIENCES↗

Effect of Surface-active Additives on Physical Properties of Slurries of Vapor-process Magnesium

The presence of 3 to 5 percent surface-active additive gave the lowest Brookfield apparent viscosity, plastic viscosity, and yield value that were obtained for slurry fuels containing approximately 50 percent vapor-process magnesium in JP-1 fuel. The slurries settled little and were easily remixed. A polyoxyethylene dodecyl alcohol was the most effective of 13 additives tested in reducing the Brookfield apparent viscosity and the yield value of the slurry. The seven most effective additives all had a hydroxyl group plus an ester or polyoxethylene group in the molecule. The densities of some of the slurries were measured.

Pinns, Murray L↗

Nonlinear damage analysis: Postulate and evaluation

The objective of this program is to assess the viability of a damage postulate which asserts that the fatigue resistance curve of a metal is history dependent due to inelastic action. The study focusses on OFE copper because this simple model material accentuates the inelastic action central to the damage postulate. Data relevant to damage evolution and crack initiation are developed via a study of surface topography. The effects of surface layer residual stresses are explored via comparative testing as were the effects in initial prestraining. The results of the study very clearly show the deformation history dependence of the fatigue resistance of OFE copper. Furthermore the concept of deformation history dependence is shown to qualitatively explain the fatigue resistance of all histories considered. Likewise quantitative predictions for block cycle histories are found to accurately track the observed results. In this respect the assertion that damage per cycle for a given level of the damage parameter is deformation history dependent appears to be physically justified.

Leis, B. N.↗

Controlled synthesis of buried delta-layers of Ag nanocrystals for near-field plasmonic effects on free surfaces

We report on the shallow synthesis by low energy ion implantation of delta-layers of Ag nanocrystals in SiO{sub 2} at few nanometers under its free surface. Transmission electron microscopy observations, ballistic simulations, and reflectance measurements are coupled to define the conditions for which the synthesis is fully controlled and when, on the contrary, this control is lost. We show that low dose implantation leads to the formation of a well-defined single plane of nanocrystals, while for larger doses, sputtering and diffusion effects limit the control of the size, position, and volume amount of these nanocrystals. This paper provides the experimental evidence of the incorporated dose saturation predicted in the literature when implanting metal ions at high doses in glass matrices. Its consequences on the particle population and the plasmonic optical response of the composite layers are carefully analyzed. We show here that this saturation phenomenon is underestimated in standard simulation predictions due to diffusion of metal atoms towards the surface and nanocrystal nucleation during the implantation process.

36 MATERIALS SCIENCE↗

Different atmospheric effects in remote sensing of uniform and nonuniform surfaces

The atmospheric effect on the radiance of sunlight scattered from the earth-atmosphere system is greatly dependent on the surface reflectance pattern, the contrast between adjacent fields, and the optical properties of the atmosphere. In addition, the atmospheric effect is described by the range and magnitude of the adjacency effects, the atmospheric modulation transfer function, and the apparent spatial resolution of remotely sensed imagery. This paper discusses the atmospheric effect on classification of surface features and shows that surface nonuniformity can be used for developing procedures to remove the atmospheric effect from the satellite imagery.

Kaufman, Y. J.↗

Atomic hydrogen adsorption on lithium-doped graphite surfaces

The effects of lithium doping of pristine and defective graphite surfaces on hydrogen adsorption are studied by the first-principles Plane-Wave Density Functional Theory. The surface defects are simulated by a single atomic vacancy. The DFT calculation is corrected for long-range effects through semi-empirical London terms for each constituent of the system. The lithium doping of the graphite surfaces notably reinforces hydrogen atom binding. Qualitative comparison with experimental results is given using the lithium 1s energy level shifts induced by the atomic vacancy and/or hydrogen trapping.

08 HYDROGEN↗

Ion thruster plume effects on spacecraft surfaces

A charge-exchange plasma, generated by an ion thruster, is capable of flowing upstream from the ion thruster and therefore represents a source of contamination to a spacecraft. An analytical model of the charge-exchange plasma density around a spacecraft is used to estimate the contamination which various spacecraft materials may be exposed to. Measurements of plasma density around an ion thruster are compared to this model. Results of experimental studies regarding the effects on various spacecraft materials' properties due to exposure to expected mercury contamination levels are presented.

Carruth, M. R., Jr.↗

Ion thruster plume effects on spacecraft surfaces

A charge-exchange plasma, generated by an ion thruster, is capable of flowing upstream from the ion thruster and therefore represents a source of contamination to a spacecraft. An analytical model of the charge-exchange plasma density around a spacecraft was used to estimate the contamination which various spacecraft materials may be exposed to. Measurements of plasma density around an ion thruster were compared to this model. Results of experimental studied regarding the effects on various spacecraft materials' properties due to exposure to expected mercury contamination levels are presented.

Carruth, M. R., Jr.↗

Surface and bulk effects of K in Cu 1-x K x In 1-y Ga y Se 2 solar cells

Two strategies for enhancing photovoltaic (PV) performance in chalcopyrite solar cells were investigated: Cu 1-x K x In 1-y Ga y Se 2 absorbers with low K content (K/(K+Cu), or x ~ 0.07) distributed throughout the bulk, and CuIn 1-y Ga y Se 2 absorbers with KIn 1-y Ga y Se 2 grown on their surfaces. Distributing K throughout the bulk absorbers improved power conversion efficiency, open-circuit voltage (VOC) and fill factor (FF) for Ga/(Ga+In) of 0, 0.3 and 0.5. Surface KIn 1-y Ga y Se 2 and bulk x ~ 0.07 Cu 1-x K x In 1-y Ga y Se 2 films with Ga/(Ga+In), or y of 0.3 and 0.5 also had improved efficiency, VOC, and FF, relative to CuIn 1-y Ga y Se 2 baselines. On the other hand, y ~ 1 absorbers did not benefit from K introduction. Similar to Cu 1-x K x InSe 2 , the formation of Cu 1-x K x GaSe 2 alloys was favored at low temperatures and high Na supply by the substrate, relative to the formation of mixed-phase CuGaSe 2 + KGaSe 2 . KIn 1-y Ga y Se 2 alloys were grown for the first time, as evidenced by X-ray diffraction and ultraviolet/visible spectroscopy. For all Ga/(Ga+In) compositions, the surface KIn 1-y Ga y Se 2 absorbers had superior PV performance in buffered and buffer-free devices. However, the bulk x ~ 0.07 absorbers only outperformed the baselines in buffered devices. The data demonstrate that KIn 1-y Ga y Se 2 passivates the surface of CuIn 1-y Ga y Se 2 to increase efficiency, VOC, and FF, while bulk Cu 1-x K x In 1-y Ga y Se 2 absorbers with x ~ 0.07 enhance efficiency, VOC, and FF by some other mechanism.

(Cu,K)GaSe2↗

Effects of cone surface waviness and freestream noise on transition in supersonic flow

A comparison of transition on wavy-wall and smooth-wall cones in a Mach 3.5 wind tunnel is made under conditions of either low freestream noise (quiet flow) or high freestream noise (noisy flow). The noisy flow compares to that found in conventional wind tunnels while the quiet flow gives transitional Reynolds numbers on smooth sharp cones comparable to those found in flight. The waves were found to have a much smaller effect on transition than similar sized trip wires. A satisfatory correlating parameter for the effect of waves on transition was simply the wave height-to-length ratio. A given value of this ratio was found to cause the same percentage change in transition location in quiet and noisy flows.

Morrisette, E. L.↗

Effect of surface-plasmon polaritons on spontaneous emission and intermolecular energy-transfer rates in multilayered geometries

We use a Green's tensor method to investigate the spontaneous emission rate of a molecule and the energy-transfer rate between molecules placed in two types of layered geometries: a slab geometry and a planar waveguide. We focus especially on the role played by surface-plasmon polaritons in modifying the spontaneous emission and energy-transfer rates as compared to free space. In the presence of more than one interface, the surface-plasmon polariton modes split into several branches, and each branch can contribute significantly to modifying the electromagnetic properties of atoms and molecules. Enhancements of several orders of magnitude both in the spontaneous emission rate of a molecule and the energy-transfer rate between molecules are obtained and, by tuning the parameters of the geometry, one has the ability to control the range and magnitude of these enhancements. For the energy-transfer rate interference effects between contributions of different plasmon-polariton branches are observed as oscillations in the distance dependence of this rate.

74 ATOMIC AND MOLECULAR PHYSICS↗

Mars: Correcting surface albedo observations for effects of atmospheric dust loading

We have developed a radiative transfer model which allows the effects of atmospheric dust loading on surface albedo to be investigated. This model incorporates atmospheric dust opacity, the single scattering albedo and particle phase function of atmospheric dust, the bidirectional reflectance of the surface, and variable lighting and viewing geometry. The most recent dust particle properties are utilized. The spatial and temporal variability of atmospheric opacity (Tan) strongly influences the radiative transfer modelling results. We are currently using the approach described to determine Tan for IRTM mapping sequences of selected regions. This approach allows Tan to be determined at the highest spatial and temporal resolution supported by the IRTM data. Applying the radiative transfer modelling and determination of Tan described, IRTM visual brightness observations can be corrected for the effects of atmospheric dust loading a variety of locations and times. This approach allows maps of 'dust-corrected surface albedo' to be constructed for selected regions. Information on the variability of surface albedo and the amount of dust deposition/erosion related to such variability results. To date, this study indicates that atmospheric dust loading has a significant effect on observations of surface albedo, amounting to albedo corrections of as much as several tens of percent. This correction is not constant or linear, but depends upon surface albedo, viewing and lighting geometry, the dust and surface phase functions, and the atmospheric opacity. It is clear that the quantitative study of surface albedo, especially where small variations in observed albedo are important (such as photometric analyses), needs to account for the effects of the atmospheric dust loading. Maps of 'dust-corrected surface albedo' will be presented for a number of regions.

Lee, S. W.↗

Boundary Layer Effect on the Surface Pressure of an Infinite Cone in Supersonic Flow

The theory of Taylor and Maccoll (Ref,1) gives the surface pressure on an infinite cone in supersonic flow as a function of the cone vertex angle and the free stream Mach number and static pressure for a gas of vanishing viscosity. When a slender conical probe is used together with an impact pressure probe to determine the static pressure and Mach number in a low density gas stream, it is desirable to have some theoretical estimate of the effect of viscous boundary layer on the probe readings. Theoretical and experimental results with respect to impact probes have been presented in Refs. 5 and 6. A simple approximation for a conical probe based on linearized supersonic flow and compressible boundary layer theory is presented here.

Lin, T. C.↗

The NO reduction by CO over NiO x /CeO 2 catalysts with a fixed Ni surface density: pretreatment effects on the catalyst structure and catalytic activity

NiO x /CeO 2 catalysts have shown promising results in various catalytic reactions, including the NO reduction by CO. Here, in this study, we investigated the effect of oxidation and reduction treatments on the NO reduction by CO over pretreated NiO x /CeO 2 catalysts. A series of oxidized and reduced supported NiO x catalysts were synthesized in two steps: (1) the pretreatment of CeO 2 supports at different temperatures (400, 500, and 700 °C) under oxidizing and reducing conditions and (2) the synthesis of NiO x /CeO 2 catalysts by an incipient wetness impregnation method (IWI) with a fixed surface density of 5.3 Ni per nm 2 under specific conditions (oxidation/reduction) applied during the CeO 2 treatment. The prepared catalysts were characterized via BET, ICP/OES, Raman, XPS, and XRD to understand their physicochemical properties. The results showed that as the pretreatment temperature increased, the physicochemical properties of NiO x /CeO 2 catalysts were changed: a decreased specific surface area (SSA), decreased oxygen vacancy/defect sites, and an increased crystallite size. The oxidized NiO x /CeO 2 catalyst at a lower pretreatment temperature displayed a better catalytic activity, indicating that the physicochemical properties of the catalysts were key factors in enhancing the catalytic activity. To understand the intermediate species and reaction mechanism during the NO reduction by CO, an in situ DRIFTS study was performed and a possible reaction mechanism was also discussed.

36 MATERIALS SCIENCE↗

Gas-phase hydrogen permeation through alpha-titanium - Surface film and dimensional effects

The process of hydrogen transport through alpha-Ti involves simultaneous diffusion and phase boundary reactions at both surfaces, with the relative effect on each surface depending on the extent of surface contamination as well as the physical dimensions of the titanium membrane used. It is shown by the present study that hydrogen permeation in commercially pure alpha-Ti increases exponentially with temperature and is dependent on the first power of the input pressure, whether the surface is as-polished, preoxidized or prenitrided. Permeation decreases in the case of the as-polished condition if nitride or oxide films are formed at the surface in contact with source hydrogen, while increasing slightly for the same condition if such films are formed at the hydrogen exit surface.

Shah, K. K.↗