Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strong interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Substituent size versus metal binding of inhibitors with variants of influenza endonuclease

The influenza virus causes a significant burden of illness each year. Although vaccination is the most effective method to prevent seasonal influenza infection, viral escape mechanisms make vaccine composition difficult to predict. Antivirals are crucial for decreasing rates of morbidity and mortality from influenza viral infection. The newest anti-influenza drugs target the RNA-dependent RNA polymerase acidic N-terminal (PA N ) endonuclease, a critical component of influenza viral replication machinery. This study examines the structure of inhibitors of PAN that utilize a hydroxypyridinone-based metal-binding pharmacophore (MBP). Specifically, this report explores how the size of substituent groups impacts the binding conformation and affinity of a series of compounds against both wild-type (WT) and resistance mutant strains, I38T and E23K. Co-crystal structures revealed that the distance between compounds and enzyme residue 38 was conserved to maintain strong interactions, resulting in deviations from ideal coordination geometries at the active site metal centers. This suggests the interactions with residue 38 with each compound is important and can impact inhibitor potency as a consequence of distortions in the metal binding geometry of the compounds.

Endonuclease↗

Interactions of nickel/zirconia solid oxide fuel cell anodes with coal gas containing arsenic

The performance of anode-supported and electrolyte-supported solid oxide fuel cells was investigated in synthetic coal gas containing 0 to 10 ppm arsenic introduced as arsine. Arsenic was found to interact strongly with nickel in the anode, resulting in the formation of nickel-arsenic solid solution, Ni5As2 and Ni11As8, depending on temperature, arsenic concentration, and reaction time. For anode-supported cells, loss of electrical connectivity in the anode support was the principal mode of degradation, as nickel was converted to nickel arsenide phases that migrated to the surface to form large grains. Cell failure occurred well before the entire anode was converted to nickel arsenide, and followed a reciprocal square root of arsenic partial pressure dependence consistent with a diffusion-based rate-limiting step. Failure occurred more quickly with electrolyte-supported cells, which have a substantially smaller nickel inventory. For these cells, time to failure varied linearly with the reciprocal arsenic concentration in coal gas, and occurred when arsenic reached the anode/electrolyte interface. Test performed with nickel/zirconia coupons showed that arsenic was essentially completely captured in a narrow band near the fuel gas inlet.

Environmental Molecular Sciences Laboratory↗

Electrochemical, Structural and Surface Characterization of Nickel/Zirconia Solid Oxide Fuel Cell Anodes in Coal Gas Containing Antimony

The interaction of antimony with the nickel-zirconia solid oxide fuel cell (SOFC) anode has been investigated. Tests with both anode-supported and electrolyte-supported button cells were performed at 700 and 800oC in synthetic coal gas containing 10 ppb to 9 ppm antimony. Minor performance loss was observed immediately after Sb introduction to coal gas resulting in ca. 5 % power output drop. While no further degradation was observed during the following several hundred hours of testing, cells abruptly and irreversibly failed after 800-1500 hours depending on Sb concentration and test temperature. Antimony was found to interact strongly with nickel and result in extensive alteration phase formation, consistent with expectations based on thermodynamic properties. Nickel antimonide phases, NiSb and Ni5Sb2, were partially coalesced into large grains and eventually affected electronic percolation through the anode support. Initial degradation was attributed to diffusion of antimony to the active anode/electrolyte interface to form an adsorption layer.

01 COAL, LIGNITE, AND PEAT↗

Thermodynamics and kinetics of 2D g-GeC monolayer as an anode materials for Li/Na-ion batteries

Development of high capacity anode materials is one of the essential strategies for next-generation high-performance Li/Na-ion batteries. Rational design, using density functional theory, can expedite the discovery of these anode materials. Here, we propose a new anode material, germanium carbide, g-GeC, for Li/Na-ion batteries. Our results show that g-GeC possesses both benefits of the high stability of graphene and the strong interaction between Li/Na and germanene. The single-layer germanium carbide, g-GeC, can be lithiated/sodiated on both sides yielding Li 2 GeC and Na 2 GeC with a storage capacity as high as 633 mA h/g. Besides germagraphene’s 2D honeycomb structure, fast charge transfer, and high (Li/Na)-ion diffusion and negligible volume change further enhance the anode performance. These findings provide valuable insights into the electronic characteristics of newly predicted 2D g-GeC nanomaterial as a promising anode for (Li/Na)-ion batteries.

25 ENERGY STORAGE↗

Preparation and photoelectrocatalytic activity of a nano-structured WO{sub 3} platelet film

A tungsten trioxide (WO{sub 3}) film was prepared by calcination from a precursor paste including suspended ammonium tungstate and polyethylene glycol (PEG). The ammonium tungstate suspension was yielded by an acid-base reaction of tungstic acid and an ammonium solution followed by deposition with ethanol addition. Thermogravimetric (TG) analysis showed that the TG profile of PEG is significantly influenced by deposited ammonium tungstate, suggesting that PEG is interacting strongly with deposited ammonium tungstate in the suspension paste. X-ray diffraction (XRD) data indicated that the WO{sub 3} film is crystallized by sintering over 400 deg. C. The scanning electron microscopic (SEM) measurement showed that the film is composed of the nano-structured WO{sub 3} platelets. The semiconductor properties of the film were examined by Mott-Schottky analysis to give flat band potential E{sub FB}=0.30 V vs. saturated calomel reference electrode (SCE) and donor carrier density N{sub D}=2.5x10{sup 22} cm{sup -3}, latter of which is higher than previous WO{sub 3} films by two orders of magnitude. The higher N{sub D} was explained by the large interfacial heterojunction area caused by the nano-platelet structure, which apparently increases capacitance per a unit electrode area. The WO{sub 3} film sintered at 550 deg. C produced 3.7 mA cm{sup -2} of a photoanodic current at 1.2 V vs. SCE under illumination with a 500 W xenon lamp due to catalytic water oxidation. This photocurrent was 4.5-12.8 times higher than those for the other control WO{sub 3} films prepared by similar but different procedures. The high catalytic activity could be explained by the nano-platelet structure. The photocurrent was generated on illumination of UV and visible light below 470 nm, and the maximum incident photon-to-current conversion efficiency (IPCE) was 47% at 320 nm at 1.2 V. Technically important procedures for preparation of nano-structured platelets were discussed. - Graphical abstract: A nano-structured WO{sub 3} platelet film was prepared by calcination from a precursor paste including suspended ammonium tungstate and polyethylene glycol. The ammonium tungstate suspension was yielded by an acid-base reaction of tungstic acid and an ammonium solution followed by deposition with ethanol addition. The photocatalytic activity of the film was 4.5-12.8 times higher than those for the other control WO{sub 3} films prepared by similar but different procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of nanocomposites based on hydroxyapatite/sodium alginate: Synthesis and characterisation

In this study, a novel method was used to produce a nanostructured composite consisting of hydroxyapatite and sodium alginate by varying the composition of sodium alginate. The structure, morphology, simulated body fluid response and mechanical properties of the synthesised nanocomposites were characterised. From X-ray diffraction analysis, an increase in crystallite size and degree of crystallinity with an increase in the composition of sodium alginate up to 1.5 wt.% was observed. Further, it was found to decrease with an increase in the composition of sodium alginate. A notable peak shift from 1635 to 1607 cm{sup -1} and 1456 to 1418 cm{sup -1} in the Fourier transform infrared spectra of the nanocomposite was observed towards the lower wave number side when compared with pure hydroxyapatite. It reveals a strong interaction between the positively charged calcium (Ca{sup 2+}) and the negatively charged carboxyl group (COO{sup -}) in sodium alginate. Transmission electron microscopy images of pure hydroxyapatite showed a short nanorod-like morphology with an average particle size of 13 nm. Bioresorbability of the samples was observed by immersing them in simulated body fluid medium for 14 days to evaluate the changes in pH and Ca{sup 2+} ion strength. Microhardness shows an increasing trend with an increase in the composition of sodium alginate from 1.5 to 3.0 wt.%, which is similar to that in the density. - Research Highlights: {yields} We have prepared nanohydroxyapatite/sodium alginate as a composite. {yields} Effect of sodium alginate on the properties of nanohydrroxyapatite has been studied. {yields} The sodium alginate ranges from 0 to 3.75 wt.% has been used. {yields} Composites show improved biological and mechanical properties.

36 MATERIALS SCIENCE↗

In-situ photo-reduction of silver particles and their SPR effect in enhancing the photocatalytic water splitting of Ag{sub 2}O/TiO{sub 2} photocatalysts under solar light irradiation: A case study

Highlights: • Visible light induced SPR bands confirmed the Plasmonic resonance behaviour of Ag. • Appreciable band gap reduction of TiO{sub 2} due to in-situ photoreduction of Ag{sub 2}O to Ag. • H{sub 2}-TPR emphasized the strong interaction between Ag and TiO{sub 2}. • Ag/TiO{sub 2} witnessed 76.6 folds improved H{sub 2} production rate than P25-TiO{sub 2}. - Abstract: Plasmonic Ag{sub 2}O/TiO{sub 2} photocatalysts were synthesized by impregnating silver oxide nano clusters over the surface of TiO{sub 2}. It is found that the in-situ photo reduced silver particles showed visible light absorption in a wide range of wavelength 400–800 nm due to localized surface plasmon resonance. The in-situ formed metallic silver transfer electrons to the TiO{sub 2} through SPR excitation and thus improving photocatalytic hydrogen production. The SPR behavior of silver particles on TiO{sub 2} was characterized by UV–vis diffuse reflectance spectroscopy and the X-ray photoelectron spectroscopy confirms the metallic silver. X-ray diffraction and transmission electron microscopy confirm the crystallinity of the prepared samples. H{sub 2}-temperature-programmed reduction, photoluminescence, electron paramagnetic resonance, infrared spectroscopy, BET-surface area and Raman spectra were used to understand the morphological and chemical nature of the catalysts. Among the samples, 1 wt% Ag/TiO{sub 2} showed the best activity ca. ∼23 mmol g{sup −1} in presence of glycerol scavenger.

36 MATERIALS SCIENCE↗

PBI nanofiber mat-reinforced anion exchange membranes with covalently linked interfaces for use in water electrolysers

Anion exchange membranes (AEM) are key components in anion exchange membrane water electrolysers. Recently developed materials are less susceptible to the alkaline degradation of the polymer backbone and quaternary ammonium groups. A remaining challenge is the mechanical stability in contact with hot water and dimensional stability when the temperature of the feed solution changes. One solution is to reinforce membranes with a porous support. Since support materials like PEEK or PTFE have a different swelling behavior than the matrix and no strong interactions with the matrix, voids can form, and gas crossover increases. In this work, we approach this issue by pore filling polybenzimidazole nanofiber mats with the bromomethylated precursor of mTPN, an ultra-stable AEM material. During drying, a covalent interaction between support (PBI amine groups) and matrix (-CH 2 Br) is established. After quaternization, the optimized PBI/mTPN-50.120 composite membrane still shows a high conductivity of 62 mS cm –1 , but 37% reduced length swelling in comparison to the non-reinforced membrane. Tensile strength and Young's modulus increase 17% and 56% to 49 MPa and 680 MPa, respectively. In an electrolyser, a stable voltage of 1.98V at 0.25 A cm –2 was achieved, and no change in membrane resistance was observed over the test time of 200 h (50°C, 1 M KOH, catalysts based on Ni/Fe and Mo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantum mechanical study of CO 2 and CO hydrogenation on Cu(111) surfaces doped with Ga, Mg, and Ti

DFT methods were used to analyze metal (M)-doped Cu(111) surfaces to identify surface alloys that could catalyze the hydrogenation of CO 2 . Here, the adsorption of relevant species for CO 2 /CO hydrogenation were studied on Cu(111) surfaces doped with Ga, Mg, and Ti. Preferred adsorption sites, geometries, and binding energies for relevant intermediates were determined. A systematic study of the thermochemistry of plausible surface reactions for CO 2 /CO hydrogenation on Ga/Cu(111), Mg/Cu(111), and Ti/Cu(111) was performed to postulate reaction mechanisms for the synthesis of formic acid, formaldehyde, and methanol. Our results suggest that Ga/Cu(111) and Mg/Cu(111) surfaces might be promising catalysts for the synthesis of methanol from CO 2 hydrogenation. CO 2 is activated by chemisorption on Mg/Cu(111) and Ti/Cu(111), but the latter surface has a strong interaction with O, which inhibits the last reaction steps and the desorption of the products. Our results demonstrate that the thermochemistry of CO 2 hydrogenation for the synthesis of the different products varies drastically depending on the dopant on Cu(111). Furthermore, our results suggest that the formation energies of HCOO, CH 2 O, CH 3 O, and HCO are good descriptors for catalyst screening.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SMASH – A new hadronic transport approach

Microscopic transport approaches are the tool to describe the non-equilibrium evolution in low energy collisions as well as in the late dilute stages of high-energy collisions. Here, a newly developed hadronic transport approach, SMASH (Simulating Many Accelerated Strongly-interacting Hadrons) is introduced. The overall bulk dynamics in low energy heavy ion collisions is shown including the excitation function of elliptic flow employing several equations of state. The implications of this new approach for dilepton production are discussed and preliminary results for afterburner calculations at the highest RHIC energy are presented and compared to previous UrQMD results. A detailed understanding of a hadron gas with vacuum properties is required to establish the baseline for the exploration of the transition to the quark-gluon plasma in heavy ion collisions at high net baryon densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Extraction of heavy-flavor transport coefficients in QCD matter

Here, we report on broadly based systematic investigations of the modeling components for open heavy-flavor diffusion and energy loss in strongly interacting matter in their application to heavy-flavor observables in high-energy heavy-ion collisions, conducted within an EMMI Rapid Reaction Task Force framework. Initial spectra including cold-nuclear-matter effects, a wide variety of spacetime evolution models, heavy-flavor transport coeffcients, and hadronization mechanisms are scrutinized in an effort to quantify pertinent uncertainties in the calculations of nuclear modification factors and elliptic flow of open heavy-flavor particles in nuclear collisions. We develop procedures for error assessments and criteria for common model components to improve quantitative estimates for the (low-momentum) heavy-flavor diffusion coeffcient as a long-wavelength characteristic of QCD matter as a function of temperature, and for energy loss coeffcients of high-momentum heavy-flavor particles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evidence for top quark production in nucleus-nucleus collisions

We report droplets of quark-gluon plasma (QGP), an exotic state of strongly interacting quantum chromodynamics (QCD) matter, are routinely produced in heavy nuclei high-energy collisions. Although the experimental signatures marked a paradigm shift away from expectations of a weakly coupled QGP, a challenge remains as to how the locally deconfined state with a lifetime of a few fm can be resolved. The only colored particle that decays mostly within the QGP is the top quark. Here we demonstrate, for the first time, that top quark decay products are identified, irrespective of whether interacting with the medium (bottom quarks) or not (leptonically decaying W bosons). Using 1.7±0.1 nb -1 of lead-lead (A = 208) collision data recorded by the CMS experiment at a nucleon-nucleon center-of-mass energy of 5.02 TeV, we report evidence of top quark pair ($t\bar{t}$) production. Dilepton final states are selected, and the cross section ($σ_{t\bar{t}}$) is measured from a likelihood fit to a multivariate discriminator using lepton kinematic variables. The $σ_{t\bar{t}}$ measurement is additionally performed considering the jets originating from the hadronization of bottom quarks, which improve the sensitivity to the $t\bar{t}$ signal process. After background subtraction and analysis corrections, the measured $σ_{t\bar{t}}$ is 2.56 ± 0.82(tot) and 2.02 ± 0.69(tot)μb in the two cases, respectively, consistent with predictions from perturbative QCD.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electromagnetic & Weak Probes: Experimental Overview

Electromagnetic and electroweak probes are the most versatile probes in the study of heavy-ion collisions. Produced at every stage in the evolution of QCD matter, its messengers are practically inert to the strongly interacting medium they travel through. In this contribution, I will discuss a selection of new results from experiments at the LHC, RHIC, and SIS facilities, spanning almost four orders of magnitude in beam energy. Finally, I will conclude with a brief overview of the experimental landscape in the near future.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantifying heavy quark transport coefficients with an improved transport model

We report that the heavy-flavor transport coefficients contain important information on the strong interaction at finite temperatures. The extraction of these numbers from experimental data requires dynamical modeling of heavy-flavor transport that is coupled to realistic medium evolution. Furthermore, meaningful extractions necessitate both a faithful implementation of the physical inputs to be tested and the quantification of model uncertainty. For these purposes, we have developed a partonic transport model LIDO. It has an improved treatment of in-medium parton bremsstrahlung, which has been calibrated to theoretical calculations in a simple medium to reduce modeling uncertainty. Regarding the interaction between heavy quark and the medium, few-body perturbative scatterings are applied to large-momentum transfer (q) processes, while a diffusion equation models the dynamics of small-q processes. Such a separation restricts the explicit use of medium quasi-particles to large-q processes only. Another advantage is that deviations from the leading-order probe-medium coupling can be parametrized as an additional contribution to the diffusion constant. The heavy quark transport coefficients are then extracted with uncertainty estimation from a Bayesian analysis including both the RHIC and the LHC data. The results are found to be consistent with earlier extraction of the light-quark transport coefficients at high momentum and be comparable with lattice calculations of the heavy-flavor diffusion constant in the static limit at low momentum.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

William A. Bardeen: A life in physics and the legacy of the chiral anomaly

William Allan Bardeen (September 15, 1941 − November 18, 2025) was an American theoretical physicist who worked at the Fermi National Accelerator Laboratory. He is renowned for his foundational work on the chiral anomaly, the Adler-Bardeen theorem, the non-Abelian anomaly and gravitational anomalies. He was instrumental in the development of quantum chromodynamics and its applications, such as semileptonic decays and the Λ $\overline{MS}$ scheme frequently used in perturbative analysis of high energy processes involving strong interactions. Bardeen also played a major role in developing a theory of dynamical breaking of electroweak symmetry via top quark condensates, leading to one of the first composite Brout-Englert-Higgs boson models. His work on the chiral symmetry dynamics of heavy-light quark bound states correctly predicted abnormally long-lived resonances which are chiral symmetry partners of the ground state.

Hill, Christopher T. [Fermi National Accelerator L↗

Light-front quantum chromodynamics: A framework for the analysis of hadron physics

An outstanding goal of physics is to find solutions that describe hadrons in the theory of strong interactions, Quantum Chromodynamics (QCD). For this goal, the light-front Hamiltonian formulation of QCD (LFQCD) is a complementary approach to the well-established lattice gauge method. LFQCD offers access to the hadrons nonperturbative quark and gluon amplitudes, which are directly testable in experiments at forefront facilities. We present an overview of the promises and challenges of LFQCD in the context of unsolved issues in QCD that require broadened and accelerated investigation. We identify specific goals of this approach and address its quantifiable uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The effect of thermal annealing on dopant site choice in conjugated polymers

Solution-processed organic electronic devices often consist of layers of polar and non-polar polymers. In addition, either of these layers could be doped with small molecular dopants. It is extremely important for device stability to understand the diffusion behavior of these molecular dopants under the thermal stress and whether the dopants have preference for the polar or the non-polar polymer layers. In this work, a widely used molecular dopant 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) was chosen to investigate dopant site preference upon thermal annealing between the polar thiophene poly(thiophene-3-[2-(2-methoxy-ethoxy)ethoxy]-2,5-diyl) (S–P3MEET) and non-polar thiophene poly(3-hexylthiophene) (P3HT). F4TCNQ is able to p-type dope both P3HT and S–P3MEET. Further doping studies of S–P3MEET using near edge X-ray absorption fine structure spectroscopy, conductivity measurements and atomic force microscopy show that the F4TCNQ additive competes for doping sites with the covalently attached dopants on the S–P3MEET. Calorimetry measurements reveal that the F4TCNQ interacts strongly with the side-chains of the S–P3MEET, increasing the melting temperature of the side-chains by 30 °C with 5 wt% dopant loading. Next, the thermal stability of doping in the polar/non-polar (S–P3MEET/P3HT) bilayer architectures was investigated. Steady-state absorbance and fluorescence results show that F4TCNQ binds much more strongly in S–P3MEET than P3HT and very little F4TCNQ is found in the P3HT layer after annealing. In combination with reflectometry measurements, we show that F4TCNQ remains in the SP3MEET layer with annealing to 210 °C even though the sublimation temperature for neat F4TCNQ is about 80 °C. In contrast, F4TCNQ slowly diffuses out of P3HT at room temperature. We attribute this difference in binding the F4TCNQ anion to the ability of the ethyl-oxy side-chains of the S–P3MEET to orient around the charged dopant molecule and thereby to stabilize its position. Furthermore, this study suggests that polar side-chains could be engineered to increase the thermal stability of molecular dopant position.

36 MATERIALS SCIENCE↗

Measuring the flavor asymmetry in the sea quarks of the proton with the Drell-Yan process.

The proton is a composite object made of fundamental, strongly interacting quarks. Many of the features of the proton can be described by a simple picture based on three 'valence' quarks bound by the exchange of gluons. However, protons are much more complex objects with the vast majority of their mass dynamically generated by quantum chromodynamics (QCD). This mass manifests itself through a 'sea' of gluons and quark-antiquark pairs. By measuring Drell-Yan scattering, the Fermilab E-906/Drell-Yan experiment will study the sea quark distribution in the proton and, in particular, the unusually large asymmetry between anti-up and anti-down quarks measured by earlier Drell-Yan experiments. This asymmetry cannot simply be generated through pair creation, but rather indicates an underlying, fundamental antiquark component in the proton. Using the same technique, the E-906/SeaQuest experiment will also investigate the differences between the antiquark distributions of the free proton and a proton bound in a nucleus. Nuclear binding is expected to modify the quark distributions and it has long been known that the overall quark distributions are different (the EMC effect). Surprisingly, present data suggest, however, that the antiquark distributions are not modified. To accomplish these goals, the experiment will use a 120 GeV proton beam extracted from the Fermilab Main Injector. While the experiment will be taking advantage of equipment from earlier Drell-Yan experiments, the changes in kinematics of the experiment require several, significant upgrades to the spectrometer. Japanese institutions, including Tokyo Institute of Technology, KEK, RIKEN, Kyoto University and Yamagata University, are making substantial contributions to this upgrade. The collaboration expects to begin data collection in Summer, 2010.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗