Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “soft”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Conformal hetero-electrolyte interface between soft oxyhalides and garnet enables low-pressure lithium-reservoir-free solid-state batteries

The operation of solid-state batteries with a lithium metal anode and a high voltage cathode requires solid electrolytes (SEs) that are chemically stable with lithium, have a wide electrochemical window, and accommodate volume changes in the electrodes. Unfortunately, no SE has exhibited satisfactory mechanical and electrochemical properties that fit these requirements to date. Dual solid electrolyte systems that use a different SE for the anolyte and catholyte present a viable solution. Here, we focus on oxyhalide SEs that demonstrate superior ionic conductivity and cathode compatibility, where their lithium metal reactivity and poor reduction stability can be resolved using a lithium garnet (Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 , LLZTO) separator. Nonetheless, this imposes a new hetero-electrolyte (H-E) interface at the anolyte|catholyte contact that defines the ion transport across the boundary. We report its promising properties, which are deconvoluted from the electrical measurements of bilayer symmetric cells, for three representative oxyhalide catholytes, LiNbOCl 4 , LiTaOCl 4 , and Li 3 Al 3 O 2 Cl 8 . Pressure-dependent measurements reveal that the relative softness of the oxyhalides (hardness ≤0.4 GPa) enables H-E resistances lower than 150 Ω cm 2 at 2–3 MPa. Mesoscale modelling reveals that the transfer-active contact area of oxyhalides with LLZTO is about 2–3-fold higher than that of argyrodite, Li 6 PS 5 Cl. The low H-E resistance of the LiNbOCl 4 |Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 dual electrolyte enables the cycling of a Li|LiNi 0.82 Mn 0.07 Co 0.11 O 2 full cell with a high discharge capacity (200 mA h g −1 ) at 60 °C and ∼7 MPa. Importantly, we demonstrate a Li-reservoir-free full cell with high Coulombic efficiency (>99.5%) and capacity at 1 MPa using this approach coupled with a garnet-silver interlayer.

Palmer, Max [University of California, Santa Barba↗

Optimizing microfluidic flow cell geometry for in situ resonant soft X-ray characterization of molecular nanostructures

Liquid-phase resonant soft X-ray scattering (LP-RSoXS) is an emerging label-free technique to probe chemically resolved nanostructures of molecular or hybrid materials in liquid environments. Still, quantitative analysis is hindered by the pressure-induced deformation of thin silicon nitride (SiN) membranes used as windows in microfluidic flow cells, which attenuates the signal in nonlinear ways, making experimental optimization difficult. Here, in this work, we directly characterize this deformation under experimental conditions for a variety of cell configurations. We use this to develop a predictive model that combines transmission effects of SiN bowing, incident X-ray beam profiles, and material-dependent resonant scattering cross sections to simulate the effective scattering intensity at the detector across the carbon K-edge. Maps of the total signal across the flow cell window reveal that increasing the window width and polymer concentration shifts the anisotropic intensity distributions from the center toward the edges of the window. It was determined that an optimal SiN thickness of 50 nm, with a window aperture of 104 μm, maximizes the total signal for typical solute concentrations and energies across the carbon K-edge. Our results overturn the assumption that corner regions dominate the scattering signal, offering explicit design guidelines for maximizing LP-RSoXS signals and significantly advancing the quantitative application of this technique to the characterization of molecular and hybrid nanostructured materials in liquids.

Grabner, Devin [Washington State Univ., Pullman, W↗

Influence of multiple magnetic phases on the extrinsic damping of FeCo-SiO{sub 2} soft magnetic films

In order to investigate the high-frequency damping properties of the ferromagnetic film for the electromagnetic shielding applications, a series of (FeCo){sub 2x}/(Fe){sub x}/(SiO{sub 2}){sub 1-3x} nanogranular films with various volume fractions (x) were fabricated by alternate triple-target magnetron sputtering. The (FeCo){sub 0.50}/Fe{sub 0.25}/(SiO{sub 2}){sub 0.25} film shows excellent soft magnetic properties (4{pi}M{sub s{approx}}1.48 T, H{sub ce{approx}}4.3 Oe, {rho}{approx}4.3 {mu}{Omega} m). In both ferromagnetic resonance (FMR) and frequency-dependent permeability spectra measurements, two resonance peaks of the permeability for this film are obtained, which can be attributed to the complicated magnetic structure of FeCo and Fe phases in the film. This multiphase system makes an additional contribution to the extrinsic damping. As a result, the higher natural resonance frequency f for the film is up to 2.75 GHz with full width at half maximum of about 2.5 GHz for the imaginary part {mu}{sup ||}; meanwhile, the real part {mu}{sup /} is as high as 650 while f<1.3 GHz. These films could be novel candidates for the electromagnetic shielding applications.

36 MATERIALS SCIENCE↗

Chiral Symmetry Breaking In The AdS/QCD Soft-Wall Model

We show how to incorporate chiral symmetry breaking in the soft-wall version of the AdS/QCD model by using a modified dilaton profile and a quartic term in the bulk scalar potential. This allows one to separate the dependence on spontaneous and explicit chiral symmetry breaking. Moreover our 5D model automatically incorporates linear trajectories and non chiral-symmetry restoration for highly excited radial states. We compare our resulting mass spectra in the scalar, vector and axial-vector sectors with the respective QCD resonances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bulk Fermions in Soft Wall Models

We discuss the implementation of bulk fermions in soft wall models. The introduction of a position dependent bulk mass allows for a well defined Kaluza-Klein expansion for bulk fermions. The realization of flavor and the contribution to electroweak precision observables are shown to be very similar to the hard wall case. The bounds from electroweak precision test are however milder with gauge boson Kaluza-Klein modes as light as approx1.5 TeV compatible with current experimental bounds.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The nrMSSU(5) and universality of soft masses

We discuss the problem of universality of the soft, supersymmetry-breaking terms in the minimal supersymmetric SU(5) model (MSSU(5)) completed with flavor-dependent nonrenormalizable operators (NROs), or nrMSSU(5). These are exploited to correct the wrong fermion spectrum and to slow down the too-fast decay rate of the proton that the MSSU(5) model predicts. In general, the presence of such operators in the superpotential and Kaehler potential gives rise to tree-level flavor- and CP-violating entries in the sfermion mass matrices at the cutoff scale, even when the mediation of supersymmetry (SUSY) breaking is generation and field-type independent. We identify the conditions under which such terms can be avoided.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Grain transport in three-dimensional soft dusty plasma states

Three-dimensional molecular dynamics simulations of aggregates of dust grains interacting via repulsive Yukawa forces, and subject to heating by neutrals and realistic boundary conditions, suggest that grain transport is ubiquitously anomalous for soft states at the transition between liquid and solid. These anomalies include self-similar, stretched-Gaussian, probability density distributions of grain displacements and superdiffusive displacement scaling on the short time scales for which the mean displacements sigma(tau) are less than the interparticle distance DELTA. However, the details of the anomalous transport on these shorter time scales depend on system stiffness and confinement conditions. On time scales for which sigma(tau)>=DELTA, humps can develop on the distribution at integer multiples of DELTA, an effect of cooperative hopping of grains on the lattice. Relaxation toward Gaussian displacement distributions and normal diffusion takes place on time scales for which sigma(tau)>DELTA. The simulations indicate that qualitative features previously found for hexatic states of two-dimensional aggregates by simulation and experiment are also present in three-dimensional configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift tube soft-landing for the production and characterization of materials: Applied to Cu clusters

We have recently developed a soft-landing (SL) instrument that is capable of depositing ions onto substrates for preparative and developmental research of new materials using a laser ablation source. This instrument was designed with a custom drift tube and a split-ring ion optic for the isolation of selected ions. The drift tube allows for the separation and thermalization of ions formed after laser ablation through collisions with an inert bath gas. These collisions allow the ions to be landed at energies below 1 eV onto substrates. The split-ring ion optic is capable of directing ions toward the detector or a landing substrate for selected components. Experiments will be shown ablating Cu using an Nd:YAG (1064 and 532 nm) for cluster formation and landing onto a muscovite (mica) surface. The laser ablation of Cu in 8 Torr of He gas gives a spectrum that contains multiple peaks corresponding to Cu{sub n}, Cu{sub n}O{sub m} clusters, and their corresponding isomers. Atomic force microscopy and drift tube measurements were performed to characterize the performance characteristics of the instrument.

36 MATERIALS SCIENCE↗

Semicrystalline woodpile photonic crystals without complicated alignment via soft lithography

We report the fabrication and characterization of woodpile photonic crystals with up to 12 layers through titania nanoparticle infiltration of a polymer template made by soft lithography. Because the complicated alignment in the conventional layer-by-layer fabrication associated with diamondlike symmetry is replaced by a simple 90{sup o} alignment, the fabricated photonic crystal has semicrystalline phase. However, the crystal performs similarly to a perfectly aligned crystal for the light propagation integrated from the surface normal to 30{sup o} at the main photonic band gap.

36 MATERIALS SCIENCE↗

Standing-wave excited soft x-ray photoemission microscopy: application to Co microdot magnetic arrays

We demonstrate the addition of depth resolution to the usual two-dimensional images in photoelectron emission microscopy (PEEM), with application to a square array of circular magnetic Co microdots. The method is based on excitation with soft x-ray standing-waves generated by Bragg reflection from a multilayer mirror substrate. Standing wave is moved vertically through sample simply by varying the photon energy around the Bragg condition. Depth-resolved PEEM images were obtained for all of the observed elements. Photoemission intensities as functions of photon energy were compared to x-ray optical calculations in order to quantitatively derive the depth-resolved film structure of the sample.

36 MATERIALS SCIENCE↗

Domain wall assisted magnetization switching in (111) oriented L1{sub 0} FePt grown on a soft magnetic metallic glass

We report on growth and magnetic properties of exchange-coupled (111)-L1{sub 0} FePt hard/CoFeTaB soft magnetic metallic glass bilayered structure processed at lower temperature ({approx}400 deg. C). Single phaselike hysteresis loops with tailorable coercivity (<8.2 kOe) in out of plane direction are obtained. The magnetization switching mechanism is identified as domain wall assisted. In views of excellent nanofabrication abilities of metallic glass thin film and the ability to grow preferred oriented L1{sub 0} FePt, the present bilayered structure is very promising for the fabrication of high density bit--patterned magnetic recording media and other spintronic devices.

36 MATERIALS SCIENCE↗

Influence of the magnetic field annealing on the extrinsic damping of FeCoB soft magnetic films

In order to investigate the high-frequency damping properties of the ferromagnetic film for the electromagnetic shielding applications, FeCoB films with the thickness of 200 nm were fabricated by the rf magnetron sputtering and subsequently annealed with a static in-plane magnetic field of 2000 Oe under a series of temperatures. The annealed films exhibit excellent soft magnetic and microwave loss properties. The local resonance from the multiphase microstructure and two-magnon scattering at anisotropy inhomogeneities make an additional contribution to the extrinsic damping of the films. As a result, the film annealed at 450 deg. C achieves a high full width at half maximum {Delta}f up to 6 GHz for the imaginary part of the frequency-dependent permeability. These films could be novel candidates for the electromagnetic shielding applications.

36 MATERIALS SCIENCE↗

A measurement setup for acquiring the local magnetic properties of plastically deformed soft magnetic materials

This paper introduces a new measurement setup for extraction of the local magnetic properties. With the help of finite element method simulations, modifications are made on the previous double-C-yoke method. Small dimension measuring coils are applied in the stray field produced by the magnetic circuit to evaluate the local magnetic properties of the specified part of the specimen. Through the measurements with the plastically deformed materials at different temperatures, it indicates that the magnetic properties of soft magnetic materials are quite sensitive to plastic straining. After high-temperature thermal treatment on the plastically deformed specimen, the local magnetic properties exhibit an obvious recovery.

36 MATERIALS SCIENCE↗

Phenomenology of the Holographic Soft-Wall Model of QCD with 'Reversed' Dilaton

We study the phenomenology of the recently proposed modified version of the Soft-Wall model of holographic QCD with a negative dilaton profile.We investigate vector and scalar mesons, evaluating mass spectra, decay constants and two-point correlation functions. We then study chiral symmetry breaking and compute the coupling of a scalar meson with two pseudoscalars. Finally, we compare the results with the ones found in the literature in the positive-dilaton case.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Chiral Symmetry Breaking and Potentials in Soft-Wall Models of AdS/QCD

The Anti-de Sitter Space/Conformal Field Theory (AdS/CFT) correspondence may offer new and useful insights into the non-perturbative regime of strongly coupled gauge theories such as Quantum Chromodynamics (QCD). A modified soft-wall AdS/QCD model is constructed to incorporate both explicit and spontaneous chiral symmetry breaking and linear confinement. This model contains a modified dilaton and higher-order interaction terms in the Lagrangian. Within this model we calculate the radial scalar, pseudo-scalar, vector and axial-vector mass spectra. We find good agreement with experimental data. We show how to construct potentials which lead to such solutions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

BioRef: A versatile time-of-flight reflectometer for soft matter applications at Helmholtz-Zentrum Berlin

BioRef is a versatile novel time-of-flight reflectometer featuring a sample environment for in situ infrared spectroscopy at the reactor neutron source BER II of the Helmholtz Zentrum Berlin fuer Materialien und Energie (HZB). After two years of design and construction phase the instrument has recently undergone commissioning and is now available for specular and off-specular neutron reflectivity measurements. BioRef is especially dedicated to the investigation of soft matter systems and studies at the solid-liquid interface. Due to flexible resolution modes and variable addressable wavelength bands that allow for focusing onto a selected scattering vector range, BioRef enables a broad range of surface and interface investigations and even kinetic studies with subsecond time resolution. The instrumental settings can be tailored to the specific requirements of a wide range of applications. The performance is demonstrated by several reference measurements, and the unique option of in situ on-board infrared spectroscopy is illustrated by the example of a phase transition study in a lipid multilayer film.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Soft color screening effects in diffractive DIS

We construct a QCD-based model where soft gluon rescattering between final state partons in deep inelastic scattering leads to events with large rapidity gaps and a leading proton. The model successfully describes the precise HERA data on the diffractive deep inelastic structure function in the whole available kinematical range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Soft Classification of Diffractive Interactions at the LHC

Multivariate machine learning techniques provide an alternative to the rapidity gap method for event-by-event identification and classification of diffraction in hadron-hadron collisions. Traditionally, such methods assign each event exclusively to a single class producing classification errors in overlap regions of data space. As an alternative to this so called hard classification approach, we propose estimating posterior probabilities of each diffractive class and using these estimates to weigh event contributions to physical observables. It is shown with a Monte Carlo study that such a soft classification scheme is able to reproduce observables such as multiplicity distributions and relative event rates with a much higher accuracy than hard classification.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗