Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulation data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Calculation of symmetric vortex separation affecting subsonic bodies at high incidence

A method for calculating the longitudinal aerodynamic coefficients and the pressure distributions on a body at reasonably high angles of attack is presented. The body is represented by a combination of source elements and vortex-lattice elements, including separation of the vortices at increasing angles of attack. The method is self-consistent in that the body and the separated vortex wake are treated as an integrated interacting system. The location of the separation line can be included as an arbitrary input from experimental data or can be evaluated approximately by a pressure-dependent criterion. Calculated values of the aerodynamic coefficients and pressure distributions on cone-cylinder and ogive-cylinder bodies compare well, qualitatively and quantitatively, with experimental data, including simulation of the dependence on Reynolds number.

Almosnino, D.↗

Resolution of vertical mixing-ratio profiles of atmospheric constituents retrieved from solar spectra

The relationship between the uncertainty and the resolution of the mixing-ratio profiles of absorbing gases retrieved from simulated occultation data has been investigated by analyzing sets of absorber amounts, corresponding to a constituent with a constant vertical mixing-ratio profile, along atmospheric paths observed by instruments at 0, 30, and 500 km. The vertical resolution below the instrument is limited by the number of observations and the SNR; it degrades exponentially with height and is independent of the instrument altitude; it is nearly 50 times better than the resolution obtainable above the instrument. An estimate of the resolution obtained by analyzing line shapes is included for comparison.

Shaffer, W. A.↗

Use of the WEST-1 wind turbine simulator to predict blade fatigue load distribution

To test the ability of WEST-1 to predict blade fatigue load distribution, actual wind signals were fed into the simulator and the response data were recorded and processed in the same manner as actual wind turbine data. The WEST-1 simulator was operated in a stable, unattended mode for six hours. The probability distribution of the cyclic flatwise bending moment for the blade was comparable to that for an actual wind turbine in winds with low turbulence. The input from a stationary anemometer was found to be inadequate for use in the prediction of fatigue load distribution for blade design purposes and modifications are necessary.

Janetzke, D. C.↗

Satellite Data Transmission (SDT) requirement

An 85 Mb/s modem/codec to operate in a 34 MHz C-band domestic satellite transponder at a system carrier to noise power ratio of 19.5 dB is discussed. Characteristics of a satellite channel and the approach adopted for the satellite data transmission modem/codec selection are discussed. Measured data and simulation results of the existing 50 Mbps link are compared and used to verify the simulation techniques. Various modulation schemes that were screened for the SDT are discussed and the simulated performance of two prime candidates, the 8 PSK and the SMSK/2 are given. The selection process that leads to the candidate codec techniques are documented and the technology of the modem/codec candidates is assessed. Costs of the modems and codecs are estimated.

Chie, C. M.↗

Predictability of planetary waves - Interhemispheric differences and the effects of stationary forcing

An attempt is made to determine the way in which errors appear in the ultralong waves of numerical weather prediction models, as well as the means by which such errors may be alleviated. Such efforts to improve the numerical forecasting of planetary waves derive their importance from the fact that energetic large scale phenomena are the basis for prospective improvements in extended range forecasting. A simple, linear, quasi-geostrophic and barotropic model is presently used in real data forecast simulations to explore, in an idealized context, several effects that may clarify discrepancies betweeen predictability theory and the performance of current numerical weather prediction models. Attention is given to the degree to which discrepancies may be accounted for by linear theory.

Roads, J. O.↗

A comparison of lightning and nuclear electromagnetic pulse response of tactical shelters

The internal response (electromagnetic fields and cable responses) of tactical shelters is addressed. Tactical shelters are usually well-shielded systems. Apart from penetrations by signal and power lines, the main leakage paths to the interior are via seams and the environment control unit (ECU) honeycomb filter. The time domain in three-dimensional finite-difference technique is employed to determine the external and internal coupling to a shelter excited by nuclear electromagnetic pulses (NEMP) and attached lightning. The responses of interest are the internal electromagnetic fields and the voltage, current, power, and energy coupled to internal cables. Leakage through the seams and ECU filter is accomplished by their transfer impedances which relate internal electric fields to external current densities. Transfer impedances which were experimentally measured are used in the analysis. The internal numerical results are favorably compared to actual shelter test data under simulated NEMP illumination.

Perala, R. A.↗

A new NASA/MSFC mission analysis global cloud cover data base

A global cloud cover data set, derived from the USAF 3D NEPH Analysis, was developed for use in climate studies and for Earth viewing applications. This data set contains a single parameter - total sky cover - separated in time by 3 or 6 hr intervals and in space by approximately 50 n.mi. Cloud cover amount is recorded for each grid point (of a square grid) by a single alphanumeric character representing each 5 percent increment of sky cover. The data are arranged in both quarterly and monthly formats. The data base currently provides daily, 3-hr observed total sky cover for the Northern Hemisphere from 1972 through 1977 less 1976. For the Southern Hemisphere, there are data at 6-hr intervals for 1976 through 1978 and at 3-hr intervals for 1979 and 1980. More years of data are being added. To validate the data base, the percent frequency of or = 0.3 and or = 0.8 cloud cover was compared with ground observed cloud amounts at several locations with generally good agreement. Mean or other desired cloud amounts can be calculated for any time period and any size area from a single grid point to a hemisphere. The data base is especially useful in evaluating the consequence of cloud cover on Earth viewing space missions. The temporal and spatial frequency of the data allow simulations that closely approximate any projected viewing mission. No adjustments are required to account for cloud continuity.

Brown, S. C.↗

Landsat thematic mapper (TM) soil variability analysis over Webster County, Iowa

Thematic mapper simulator (TMS) data acquired June 7, June 23, and July 31, 1982, and Landsat thematic mapper (TM) data acquired August 2, September 3, and October 21, 1982, over Webster County, Iowa, were examined for within-field soil effects on corn and soybean spectral signatures. It was found that patterns displayed on various computer-generated map products were in close agreement with the detailed soil survey of the area. The difference in spectral values appears to be due to a combination of subtle soil properties and crop growth patterns resulting from the different soil properties. Bands 4 (0.76-.90 micron), 5 (1.55-1.75 micron), and 7 (2.08-2.35 micron) were found to be responding to the within-field soil variability even with increasing ground cover. While these results are preliminary, they do indicate that the soil influence on the vegetation is being detected by TM and should provide improved information relating to crop and soil properties.

Thompson, D. R.↗

Stratocumulus cloud deepening through entrainment

Under a substantial range of realistic conditions, stratocumulus cloud top entrainment is noted to either deepen an existing cloud layer or produce clouds in an unsaturated mixed layer, though the entrained air is warmer and drier than the mixed-layer air. These results, which apply irrespective of entrainment rate-determining mechanism, imply that the cloud top entrainment instability discussed by Randall (1980) and Deardorff (1980) does not necessarily destroy a layer cloud. Examples are given which include soundings, marine layer data, and simulation results produced by the UCLA general circulation model.

Randall, D. A.↗

Use of Thematic Mapper for water quality assessment

The evaluation of simulated TM data obtained on an ER-2 aircraft at twenty-five predesignated sample sites for mapping water quality factors such as conductivity, pH, suspended solids, turbidity, temperature, and depth, is discussed. Using a multiple regression for the seven TM bands, an equation is developed for the suspended solids. TM bands 1, 2, 3, 4, and 6 are used with logarithm conductivity in a multiple regression. The assessment of regression equations for a high coefficient of determination (R-squared) and statistical significance is considered. Confidence intervals about the mean regression point are calculated in order to assess the robustness of the regressions used for mapping conductivity, turbidity, and suspended solids, and by regressing random subsamples of sites and comparing the resultant range of R-squared, cross validation is conducted.

Horn, E. M.↗

Aeronautical facilities catalogue. Volume 2: Airbreathing propulsion and flight simulators

Volume two of the facilities catalogue deals with Airbreathing Propulsion and Flight Simulation Facilities. Data pertinent to managers and engineers are presented. Each facility is described on a data sheet that shows the facility's technical parameters on a chart and more detailed information in narratives. Facilities judged comparable in testing capability are noted and grouped together. Several comprehensive cross-indexes and charts are included.

Penaranda, F. E.↗

An interactive program for software reliability modeling

With the tremendous growth in computer software, the demand has arisen for producing cost effective reliable software. Over the last 10 years an area of research has developed which attempts to address this problem by estimating a program's current reliability by modeling either the times between error detections or the error counts in past testing periods. A new tool for interactive software reliability analysis using the computer is described. This computer program allows the user to perform a complete reliability analysis using any of eight well-known models appearing in the literature. Some of the capabilities of the program are illustrated by means of an analysis of a set of simulated error data.

Farr, W. H.↗

Modified Denavit-Hartenberg parameters for better location of joint axis systems in robot arms

The Denavit-Hartenberg parameters define the relative location of successive joint axis systems in a robot arm. A recent justifiable criticism is that one of these parameters becomes extremely large when two successive joints have near-parallel rotational axes. Geometrically, this parameter then locates a joint axis system at an excessive distance from the robot arm and, computationally, leads to an ill-conditioned transformation matrix. In this paper, a simple modification (which results from constraining a transverse vector between successive joint rotational axes to be normal to one of the rotational axes, instead of both) overcomes this criticism and favorably locates the joint axis system. An example is given for near-parallel rotational axes of the elbow and shoulder joints in a robot arm. The regular and modified parameters are extracted by an algebraic method with simulated measurement data. Unlike the modified parameters, extracted values of the regular parameters are very sensitive to measurement accuracy.

Barker, L. K.↗

Fairness of channel access for non-time-critical traffic using the FDDI token ring protocol

The Fiber Distributed Data Interface (FDDI) is an ANSI draft proposed standard for a 100 megabit per second fiber optic token ring. FDDI supports two types of traffic, synchronous and asynchronous. Synchronous traffic is time critical traffic; stations are assigned guaranteed bandwidth to support their synchronous needs. Asynchronous traffic is lower priority and is sent only if time permits. It is proved analytically that the FDDI access protocol provides all stations on the ring with equal access to the channel to transmit asynchronous frames, regardless of the relative sizes of synchronous bandwidth allocations for individual stations. Analytic results are supported with data from simulation runs.

Johnson, M. J.↗

Geologic results of the TMS survey over Mt. Emmons, Colorado

In 1981, NASA conducted with an American company a cooperative study, involving the use of Thematic Mapper Simulator (TMS) data. The study was concerned with an area near Crested Butte, Colorado, which contains a known, but unmined, major molybdenum deposit. Detailed ground observations in the Mt. Emmons area demonstrated that the imagery was extremely effective for detection of geologically significant features. The imagery specifically delineated areas of ferric iron staining, seritization, and hornfelized rock. Attention is given to data acquisition and data processing, field work in 1982 and in 1983, the integration of gravity data, and costs.

Rickman, D. L.↗

An economical semi-analytical orbit theory for micro-computer applications

An economical algorithm is presented for predicting the position of a satellite perturbed by drag and zonal harmonics J2 through J4. Simplicity being of the essence, drag is modeled as a secular decay rate in the semimajor axis (retarded motion) with the zonal perturbations modeled from a modified version of Brouwers formulas. The algorithm is developed as an alternative on-board orbit predictor; a back up propagator requiring low energy consumption; or a ground based propagator for microcomputer applications (e.g., at the foot of an antenna). An O(J2) secular retarded state partial matrix (matrizant) is also given to employ with state estimation. The theory has been implemented in BASIC on an inexpensive microcomputer, the program occupying under 8K bytes of memory. Simulated trajectory data and real tracking data are employed to illustrate the theory's ability to accurately accommodate oblateness and drag effects.

Gordon, R. A.↗

A theoretical and empirical study of the response of the high latitude thermosphere to the sense of the 'Y' component of the interplanetary magnetic field

Patterns of magnetospheric energetic plasma precipitation as a function of the Y component of the Interplanetary Magnetic Field (IMF) are studied. The development of a three-dimensional, time-dependent global thermospheric model using a polar conversion electric field with a dependence on the Y component of the IMF to evaluate thermospheric wind circulation is examined. Thermospheric wind data from the ISEE-3 satellite, Dynamics Explorer-2 satellite, and a ground-based Fabry-Perot interferometer in Kiruna, Sweden, collected on December 1, 2, 6, 25, 1981 and February 12, 13, 1982 are described. The observed data and simulations of polar thermospheric winds are compared. In the Northern Hemisphere a strong antisunward ion flow on the dawn side of the geomagnetic polar cap is observed when the BY is positive, and the flow is detected on the dusk side when the BY is negative. It is concluded that the strength and direction of the IMF directly control the transfer of solar wind momentum and energy to the high latitude thermosphere.

Rees, D.↗

New results for geologic units mapping of Utah test sites using Landsat TM data

This paper continues a study on the accuracy of geological mapping using Landsat Thematic Mapper data (Short, 1984). In June 1976, both the White Mountain alteration zone and the Waterpocket Fold sedimentary rock sites in Utah were surveyed by the Bendix 24-band scanner on a NASA NC-130B aircraft. Mid-June 1984 TM data for these two sites have been processed like the 1976 data to test the quality of simulation of TM data. Principal-components (PC) color composite images for White Mountain show close correspondence to the Bendix PC images. At this site carbonate strata are uniquely discriminated in both Bendix and TM composites that use an inverted PC 3 image. Alunite/kaolinite and hematite/limonite alteration zones developed on volcanic flows are also sharply separated, but iron oxide and silicified zones are less so. The accuracy of rock-units mapping at the Waterpocket Fold site by supervised classification of the June TM data is significantly better, reaching 70 percent in the best case, than for January 1983 data for that site.

Short, N. M.↗