Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Understanding the effect of friction stir processing on electrical steel: Microstructural changes and mechanical transformations

Raising Si beyond 3.5 wt% reduces core loss but embrittles electrical steels, constraining processing and application. Here we assess friction stir processing (FSP) as a solid‑state route to enable Fe–4.0 wt% Si with improved mechanical performance. Temperature‑controlled FSP with a PcBN tool produced a defect‑free processed zone. SEM/EBSD revealed dynamic recrystallization and grain refinement from an average 110 μm in the base material to ∼20 μm in the processed region, with ∼ 80% of grains < 40 μm and a reduction in high‑angle boundary fraction to ∼65% (vs >85% in the base). Comparative mechanical property analysis shows a moderate increase in yield strength in FSP samples relative to the base material, with a significant improvement in ductility (∼35–50%). Post‑fracture EBSD identified 60° twin boundaries in the base while sub-grain formation with elevated KAM in the FSP sample. Fractography revealed a shift from quasi‑cleavage in the Base-faceted planes with river patterns, steps, and occasional secondary cracks—to ductile micro void coalescence after FSP. Following FSP, the material retains soft‑magnetic behavior, with modest shifts in saturation magnetization consistent with grain refinement and stored strain, accompanied by a clear gain in formability. These results indicate that FSP provides a viable route to deploy higher‑Si electrical steels with concurrent gains in strength and ductility.

Electrical steel↗

An additively manufactured AlCuMnZr alloy microstructure and tensile mechanical properties

In this study, selective laser melting (SLM) was used to fabricate an AlCuMnZr alloy. The microstructural features that resulted from additive manufacturing (AM) were significantly refined compared to the corresponding cast alloy features. A combination of fine equiaxed and columnar grains along with in-situ formation of θ' precipitates during AM leads to enhanced yield strength (up to 300°C) in the as-fabricated AM alloy. The refinement of brittle intermetallics and a bimodal grain size distribution leads to improved tensile elongation in the AM alloy. The results illustrate the microstructural advantages that can result from additive processing over conventionally processed microstructures.

36 MATERIALS SCIENCE↗

Structural investigation of the “Tripled-Tetragonal-Tungsten-Bronze” Phases Sr 2 M 10- x O 27- y (M = Nb, Ta)

Sr 2 Nb 10 O 27 and Sr 2 Ta 10- x O 27- y exhibit the tripled tetragonal-tungsten-bronze (TTTB)-related superstructures. In contrast to Sr 2 Ta 10- x O 27- y , where an extended solid solution was found, Sr 2 Nb 10 O 27 only forms a narrow range of solid solution, Sr 1- x Nb 10 O 27- z (0 ≤ x ≤ 0.04). Serial X-ray and neutron diffraction studies show that both compounds can be modelled in the orthorhombic Pba 2 space group. Lattice parameters obtained from powder X-ray refinements are a = 12.4269(2) Å, b = 37.194(7) Å, c = 3.87897(4) Å, for Sr 2 Ta 10- x O 27- y , and a = 12.3281(3) Å, b = 37.1561(11) Å, and c = 3.93971(7) Å for Sr 2 Nb 10 O 27 . Neutron Rietveld refinements of both structures revealed the possible reason for the differing solid solution behavior. For Sr 2 Nb 10 O 27 , all Nb sites are fully occupied, whereas in Sr 2 Ta 10- x O 27- y , three out of the nine crystallographically unique Ta sites were shown to be partially occupied. Charge adjustment is therefore possible by increasing the Sr concentration, leading to a solid solution series and smaller Ta/Sr ratio as compared to Sr 2 Nb 10 O 27 . In the TTTB-related structures, Nb and Ta ions both occupy octahedral and pentagonal bipyramidal coordination sites. Layers of interconnected corner-shared octahedra were found parallel to the ab plane, with three-, four- and five-fold tunnels found in the structure running parallel to the c-axis. Sr ions partially fill the four- and five-fold tunnels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of toceranib, C 22 H 25 FN 4 O 2

The crystal structure of toceranib has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional theory techniques. Toceranib crystallizes in space group P2 1 /c (#14) with a = 10.6899(6), b = 24.5134(4), c = 7.8747(4) Å, β = 107.7737(13)°, V = 1965.04(3) Å 3 , and Z = 4. The crystal structure consists of stacks of approximately planar molecules, with N–H∙∙∙O hydrogen bonds between the layers. The commercial reagent sample was a mixture of two or more phases with toceranib being the dominant phase. The difference between the Rietveld-refined and DFT-optimized structures is larger than usual. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

36 MATERIALS SCIENCE↗

Crystal structure of meglumine diatrizoate, (C 7 H 18 NO 5 )(C 11 H 8 I 3 N 2 O 4 )

The crystal structure of meglumine diatrizoate has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional theory techniques. Meglumine diatrizoate crystallizes in space group P2 1 (#4) with a = 10.74697(4), b = 6.49364(2), c = 18.52774(7) Å, β = 90.2263(3), V = 1292.985(5) Å 3 , and Z = 2. Two different crystal structures, which yielded essentially identical refinement residuals and positions of the non-H atoms, were obtained. The differences were in the H atom positions and the hydrogen bonding. One structure was 123.0 kJ/mol/cell lower in energy than the other and was adopted for the final description. The crystal structure consists of alternating double layers of cations and anions along the c-axis. The hydrogen bonds link the cations and anions into a three-dimensional framework. Each of the hydrogen atoms on the ammonium nitrogen of the cation acts as a donor in a strong N–H∙∙∙O hydrogen bond. One of these is to a hydroxyl group of another cation, and the other is to the carboxylate group of the anion. Each of the amide nitrogen atoms of the anion forms a strong N–H∙∙∙O intermolecular hydrogen bond, one to a carbonyl and the other to a carboxylate group. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF®).

36 MATERIALS SCIENCE↗

Crystal Structure of ITQ-26, a 3D Framework with Extra-Large Pores

ITQ-26 was synthesized via the fluoride procedure using 1,3-bis-(triethylphosphoniummethyl)-benzene as the structure-directing agent. The unit cell and space group were initially determined from electron diffraction experiments on individual tilted microcrystals, using material that had been sectioned by ultramicrotomy. The material crystallizes in space group I4/mmm, where after refining against synchrotron powder data ( = 0.8714 Angstroms ), a = 26.7769(8) and c = 13.2505(5) Angstroms . Integrated electron diffraction intensities (hk0 + 0kl) were assigned phases with the program MICE to yield electrostatic potential maps with the first informative view of the microporous framework. As a constraint for subsequent phasing trials of the powder data with FOCUS, one useful solution was found after 500000 trials, conforming to the electron crystallographic determination. The final model, refined by Rietveld methods, comprises 7 unique T-sites forming a framework with a straight 12-MR channel along [001]. Two other 12-MR channels are tilted with respect to this one. The T-site density is 14.3 T/1000 A3.

36 MATERIALS SCIENCE↗

Synergy on catalytic effect of Fe-Zr additives mixed in different proportions on the hydrogen desorption from MgH{sub 2}

Mg films with mixed Fe and Zr metallic additives were prepared by rf magnetron sputtering keeping the total metal content constant, about 7 at. %, and changing the [Fe]/[Zr] ratio. Isothermal hydrogen desorption curves showed that the kinetics depends on [Fe]/[Zr] ratio and is fastest when the [Fe]/[Zr] ratio is {approx}1.8. X-ray diffraction analysis revealed formation of Fe nanoclusters and Mg grain refinement. The improvement of the hydrogen desorption kinetics can be explained by the presence of atomically dispersed Zr and Fe nanoclusters acting as nucleation centers, as well as Mg grain refinement.

36 MATERIALS SCIENCE↗

Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium

Accumulative roll bonding (ARB) has been considered as one of the promising techniques for fabrication of ultra-fine grained (UFG) metallic materials. The ARB process consists of several cycles of cutting, stacking, and rolling of metal sheets, so very high strains can be induced in the material resulting in significant grain refinement and in the formation of UFG microstructures. The ARB technique has been applied to a wide range of metallic materials such as Al and Al alloys, Mg, Fe and steels, Zr, Cu, as well as composite materials. UFG metallic materials processed via ARB show increased strength. Despite a significant body of experimental research into the deformation behaviour of the ARB-processed materials, the fundamentals of their plastic deformation are not fully understood yet. This work focuses on the effect of grain refinement via ARB-processing on the mechanical behavior and on the strain-rate sensitivity of commercially pure Zr (99.8% purity). The mechanical properties of the as-received coarse-grained (CG) and UFG (as-ARB processed) samples were studied at room temperature at two different strain rates. Mechanical strain rate jump tests were performed during tensile deformation to estimate the instantaneous strain-rate sensitivity. The evolution of surface relief during plastic deformation of pure Zr in both CG and UFG conditions was studied. The features of plastic deformation of pure Zr in both CG and UFG conditions are discussed.

36 MATERIALS SCIENCE↗

Transient x-ray diffraction with simultaneous imaging under high strain-rate loading

Real time, in situ, multiframe, diffraction, and imaging measurements on bulk samples under high and ultrahigh strain-rate loading are highly desirable for micro- and mesoscale sciences. We present an experimental demonstration of multiframe transient x-ray diffraction (TXD) along with simultaneous imaging under high strain-rate loading at the Advanced Photon Source beamline 32ID. The feasibility study utilizes high strain-rate Hopkinson bar loading on a Mg alloy. The exposure time in TXD is 2–3 μs, and the frame interval is 26.7–62.5 μs. Various dynamic deformation mechanisms are revealed by TXD, including lattice expansion or compression, crystal plasticity, grain or lattice rotation, and likely grain refinement, as well as considerable anisotropy in deformation. Dynamic strain fields are mapped via x-ray digital image correlation, and are consistent with the diffraction measurements and loading histories.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

On the thermal stability of physical vapor deposited oxide-hardened nanocrystalline gold thin films

We describe a correlation between electrical resistivity and grain size for PVD synthesized polycrystalline oxide-hardened metal-matrix thin films in oxide-dilute (<5 vol. % oxide phase) compositions. The correlation is based on the Mayadas-Shatzkes (M-S) electron scattering model, predictive of grain size evolution as a function of composition in the oxide-dilute regime for 2 μm thick Au-ZnO films. We describe a technique to investigate grain boundary (GB) mobility and the thermal stability of GBs based on in situ electrical resistivity measurements during annealing experiments, interpreted using a combination of the M-S model and the Michels et al. model describing solute drag stabilized grain growth kinetics. Using this technique, activation energy and pre-exponential Arrhenius parameter values of E{sub a} = 21.6 kJ/mol and A{sub o} = 2.3 × 10{sup −17} m{sup 2}/s for Au-1 vol. % ZnO and E{sub a} = 12.7 kJ/mol and A{sub o} = 3.1 × 10{sup −18} m{sup 2}/s for Au-2 vol. % ZnO were determined. In the oxide-dilute regime, the grain size reduction of the Au matrix yielded a maximum hardness of 2.6 GPa for 5 vol. % ZnO. A combined model including percolation behavior and grain refinement is presented that accurately describes the composition dependent change in electrical resistivity throughout the entire composition range for Au-ZnO thin films. The proposed correlations are supported by microstructural characterization using transmission electron microscopy and electron diffraction mapping for grain size determination.

36 MATERIALS SCIENCE↗

Diffusion Limit–Preserving Lumped DFEMs on AMR Meshes

Here, we present sweep-compatible, novel upwinding recipes for the bilinear discontinuous (BLD) finite element method (FEM) that allows lumped BLD to be used on adaptive mesh refinement (AMR) meshes for thick transport applications without adding additional degrees of freedom at hanging nodes that exist on refinement boundaries. We analyze the properties of the upwinding and lumping that are needed for BLD to get the thick diffusion limit on such meshes, present results demonstrating locking with the wrong recipe, and present results showing error convergence and robustness properties for two diffusive problems on a variety of AMR meshes.

42 ENGINEERING↗

HOST STAR PROPERTIES AND TRANSIT EXCLUSION FOR THE HD 38529 PLANETARY SYSTEM

The transit signature of exoplanets provides an avenue through which characterization of exoplanetary properties may be undertaken, such as studies of mean density, structure, and atmospheric composition. The Transit Ephemeris Refinement and Monitoring Survey is a program to expand the catalog of transiting planets around bright host stars by refining the orbits of known planets discovered with the radial velocity technique. Here we present results for the HD 38529 system. We determine fundamental properties of the host star through direct interferometric measurements of the radius and through spectroscopic analysis. We provide new radial velocity measurements that are used to improve the Keplerian solution for the two known planets, and we find no evidence for a previously postulated third planet. We also present 12 years of precision robotic photometry of HD 38529 that demonstrate the inner planet does not transit and the host star exhibits cyclic variations in seasonal mean brightness with a timescale of approximately six years.

79 ASTRONOMY AND ASTROPHYSICS↗

Novel methods in the Particle-In-Cell accelerator Code-Framework Warp

The Particle-In-Cell (PIC) Code-Framework Warp is being developed by the Heavy Ion Fusion Science Virtual National Laboratory (HIFS-VNL) to guide the development of accelerators that can deliver beams suitable for high-energy density experiments and implosion of inertial fusion capsules. It is also applied in various areas outside the Heavy Ion Fusion program to the study and design of existing and next-generation high-energy accelerators, including the study of electron cloud effects and laser wakefield acceleration for example. This study presents an overview of Warp's capabilities, summarizing recent original numerical methods that were developed by the HIFS-VNL (including PIC with adaptive mesh refinement, a large-timestep 'drift-Lorentz' mover for arbitrarily magnetized species, a relativistic Lorentz invariant leapfrog particle pusher, simulations in Lorentz-boosted frames, an electromagnetic solver with tunable numerical dispersion and efficient stride-based digital filtering), with special emphasis on the description of the mesh refinement capability. In addition, selected examples of the applications of the methods to the abovementioned fields are given.

43 PARTICLE ACCELERATORS↗

Programming new geometry restraints: Parallelity of atomic groups

Improvements in structural biology methods, in particular crystallography and cryo-electron microscopy, have created an increased demand for the refinement of atomic models against low-resolution experimental data. One way to compensate for the lack of high-resolution experimental data is to use a priori information about model geometry that can be utilized in refinement in the form of stereochemical restraints or constraints. Here, the definition and calculation of the restraints that can be imposed on planar atomic groups, in particular the angle between such groups, are described. Detailed derivations of the restraint targets and their gradients are provided so that they can be readily implemented in other contexts. Practical implementations of the restraints, and of associated data structures, in the Computational Crystallography Toolbox ( cctbx ) are presented.

59 BASIC BIOLOGICAL SCIENCES↗

MILK : a Python scripting interface to MAUD for automation of Rietveld analysis

Modern diffraction experiments ( e.g. in situ parametric studies) present scientists with many diffraction patterns to analyze. Interactive analyses via graphical user interfaces tend to slow down obtaining quantitative results such as lattice parameters and phase fractions. Furthermore, Rietveld refinement strategies ( i.e. the parameter turn-on-off sequences) tend to be instrument specific or even specific to a given dataset, such that selection of strategies can become a bottleneck for efficient data analysis. Managing multi-histogram datasets such as from multi-bank neutron diffractometers or caked 2D synchrotron data presents additional challenges due to the large number of histogram-specific parameters. To overcome these challenges in the Rietveld software Material Analysis Using Diffraction ( MAUD ), the MAUD Interface Language Kit ( MILK ) is developed along with an updated text batch interface for MAUD . The open-source software MILK is computer-platform independent and is packaged as a Python library that interfaces with MAUD . Using MILK , model selection ( e.g. various texture or peak-broadening models), Rietveld parameter manipulation and distributed parallel batch computing can be performed through a high-level Python interface. A high-level interface enables analysis workflows to be easily programmed, shared and applied to large datasets, and external tools to be integrated with MAUD . Through modification to the MAUD batch interface, plot and data exports have been improved. The resulting hierarchical folders from Rietveld refinements with MILK are compatible with Cinema: Debye–Scherrer , a tool for visualizing and inspecting the results of multi-parameter analyses of large quantities of diffraction data. In this manuscript, the combined Python scripting and visualization capability of MILK is demonstrated with a quantitative texture and phase analysis of data collected at the HIPPO neutron diffractometer.

97 MATHEMATICS AND COMPUTING↗

Lead apatites: structural variations among Pb 5 ( B O 4 ) 3 Cl with B = P (pyromorphite), As (mimetite) and V (vanadinite)

The crystal structure of four Pb apatite samples, Pb 5 ( B O 4 ) 3 Cl, was refined with synchrotron high-resolution powder X-ray diffraction data, Rietveld refinements, space group P 6 3 / m and Z = 2. For this isotypic series, B = P 5+ is pyromorphite, B = As 5+ is mimetite and B = V 5+ is vanadinite. The ionic radius for As 5+ (0.355 Å) is similar to that of V 5+ (0.335 Å), and this is twice as large as that for P 5+ (0.170 Å). However, the c unit-cell parameter for mimetite is surprisingly different from that of vanadinite, although their unit-cell volumes, V , are almost equal to each other. No explanation was available for this peculiar c -axis value for mimetite. Structural parameters such as average $\langle$ B —O$\rangle$ [4], $\langle$Pb1—O 9 $\rangle$ [9] and $\langle$Pb2—O 6 Cl 2 $\rangle$ [8] distances increase linearly with V (the coordination numbers for the cations are given in square brackets). Mimetite has a short Pb2—O1 distance, so the O1 oxygen atom interacts with the 6 s 2 lone-pair electrons of the Pb 2+ cation that causes the Cl—Cl distance (= c /2) to increase to the largest value in the series because of repulsion, which causes the c -axis to increase anomalously. Although Pb apatite minerals occur naturally in ore deposits, they are also formed as scaly deposits in lead water pipes that give rise to lead in tap water, as was found recently in Flint, Michigan, USA. It is important to identify Pb-containing phases in water-pipe deposits.

chemistry↗

A new default restraint library for the protein backbone in Phenix : a conformation-dependent geometry goes mainstream

Chemical restraints are a fundamental part of crystallographic protein structure refinement. In response to mounting evidence that conventional restraints have shortcomings, it has previously been documented that using backbone restraints that depend on the protein backbone conformation helps to address these shortcomings and improves the performance of refinements [Moriarty et al. (2014), FEBS J. 281 , 4061–4071]. It is important that these improvements be made available to all in the protein crystallography community. Toward this end, a change in the default geometry library used by Phenix is described here. Tests are presented showing that this change will not generate increased numbers of outliers during validation, or deposition in the Protein Data Bank, during the transition period in which some validation tools still use the conventional restraint libraries.

59 BASIC BIOLOGICAL SCIENCES↗

An editor for the generation and customization of geometry restraints

Chemical restraints for use in macromolecular structure refinement are produced by a variety of methods, including a number of programs that use chemical information to generate the required bond, angle, dihedral, chiral and planar restraints. These programs help to automate the process and therefore minimize the errors that could otherwise occur if it were performed manually. Furthermore, restraint-dictionary generation programs can incorporate chemical and other prior knowledge to provide reasonable choices of types and values. However, the use of restraints to define the geometry of a molecule is an approximation introduced with efficiency in mind. The representation of a bond as a parabolic function is a convenience and does not reflect the true variability in even the simplest of molecules. Another complicating factor is the interplay of the molecule with other parts of the macromolecular model. Finally, difficult situations arise from molecules with rare or unusual moieties that may not have their conformational space fully explored. These factors give rise to the need for an interactive editor for WYSIWYG interactions with the restraints and molecule. Restraints Editor, Especially Ligands (REEL) is a graphical user interface for simple and error-free editing along with additional features to provide greater control of the restraint dictionaries in macromolecular refinement.

59 BASIC BIOLOGICAL SCIENCES↗