Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimization for fusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Determining acceptable limits of fast-electron preheat in direct-drive-ignition–scale target designs

In direct-drive–ignition designs, preheat by fast electrons created by the two-plasmon–decay or stimulated Raman instabilities can increase the adiabat in the fuel layer and reduce compression and neutron yield. Since eliminating the preheat entirely is a major challenge, it is necessary to understand the levels of preheat that preclude ignition in a direct-drive target. Two 1-D ignition-scale target designs serve as the basis for examining the effects of synthetically increasing the levels of fast electrons using the 1-D radiation–hydrodynamic code LILAC , which includes two models of fast-electron transport. The first is an ignition design adapted from a 2-D polar-direct-drive (PDD) design for the National Ignition Facility (NIF). The second is derived from the first but uses a laser pulse that generates stronger shocks and a higher fuel adiabat. This more stable “alpha-burner” design approaches ignition and achieves yield multiplication as a result of alpha heating. The designs are then re optimized to recover performance. The igniting design, when fast-electron transport was modeled with diffusion, was found to tolerate 50% more fast-electron preheat of the cold (sub-50 eV) DT ice layer when the laser pulse was optimized using the optimizer Telios . When a straight-line fast-electron transport model was used, the effects of optimization were negligible. For the alpha-burner design, an increase of over a factor of at least 3 in the tolerable level of fast-electron preheat was obtained for both transport models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-point spectral model for variable-density homogeneous turbulence

We present a study of buoyancy-driven variable-density homogeneous turbulence, using a two-point spectral closure model. We compute the time-evolution of the spectral distribution in wave number $k$ of the correlation of density and specific volume $b$($k$), the velocity associated with the turbulent mass flux $a$($k$) , and the turbulent kinetic energy $E$($k$) , using a set of coupled equations. Under the modeling assumptions, each dynamical variable has two coefficients governing spectral transfer among modes. In addition, the velocity $a$($k$) has two coefficients governing the drag between the two fluids. Using a prescribed initial condition for $b$($k$) and starting from a quiescent flow, we first evaluate the relative importance of the different coefficients used to model this system and their impact on the statistical quantities. We next assess the accuracy of the model, relative to direct numerical simulation of the complete hydrodynamical equations, using $b$, $a$, and $E$ as metrics. We show that the model is able to capture the spectral distribution and global means of all three statistical quantities at both low and high Atwood number for a set of optimized coefficients. The optimization procedure also permits us to discern a minimal set of four coefficients which are sufficient to yield reasonable results while pointing to the mechanisms that dominate the mixing process in this problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A 2-D Implicit, Energy and Charge Conserving Particle In Cell Method

Recently, a fully implicit electrostatic 1D charge- and energy-conserving particle-in-cell algorithm was proposed and implemented by Chen et al ([2],[3]). Central to the algorithm is an advanced particle pusher. Particles are moved using an energy conserving scheme and are forced to stop at cell faces to conserve charge. Moreover, a time estimator is used to control errors in momentum. Here we implement and extend this advanced particle pusher to include 2D and electromagnetic fields. Derivations of all modifications made are presented in full. Special consideration is taken to ensure easy coupling into the implicit moment based method proposed by Taitano et al [19]. Focus is then given to optimizing the presented particle pusher on emerging architectures. Two multicore implementations, and one GPU (Graphics Processing Unit) implementation are discussed and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

IS&T CoDesign Summer School 2012 Lessons Learned: A 2D, implicit, energy- and charge- conserving electromagnetic particle in cell method [Slides]

Recently, a fully implicit electrostatic 1D charge- and energy- conserving particle-in-cell algorithm was proposed and implemented. Central to the algorithm is an advanced particle pusher. Particles are moved using an energy conserving scheme and are forced to stop at cell faces to conserve charge. Moreover, a time estimator is used to control errors in momentum. Here we implement and extend this advanced particle pusher to include 2D and electromagetic fields. Special consideration is taken to ensure easy coupling into the implicit moment. Focus is then given to optimizing the presented particle pusher on emerging architectures. Two multicore implementations, and one GPU (Graphics Processing Unit) implementation are discussed and analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Perspectives and challenges of ultra-high temperature ceramics for fusion plasma-facing applications

Ultra-high temperature ceramics (UHTCs) offer several potential advantages as plasma-facing components (PFCs) in fusion reactors due to their extreme melting points, tailorable thermal conductivity, and attractive unirradiated mechanical properties including fracture toughness comparable or superior to tungsten. Here, recent developments and material properties of UHTCs are briefly reviewed, along with an overview of limited studies on their responses to neutron irradiation and an evaluation of plasma-surface interactions. Five key research pathways, primarily focused on irradiation effects, for advancing UHTCs in PFC applications are discussed: (1) assessing irradiation effects on the coupled thermal–mechanical performance (2) addressing the lack of studies on irradiation, plasma-surface interactions, and their synergistic effects; (3) investigating high-temperature (>1000 °C) neutron irradiation effects critical for PFC performance; (4) optimizing multi-component UHTC compositions or composites to improve thermal or mechanical properties; (5) enhancing radiation resistance to mitigate microcracking and void swelling through strategies such as increasing sink strength by reducing grain size, introducing fine particles, and leveraging complex concentrated alloy concepts.

36 MATERIALS SCIENCE↗

An in situ accelerator-based diagnostic for plasma-material interactions science on magnetic fusion devices

This paper presents a novel particle accelerator-based diagnostic that nondestructively measures the evolution of material surface compositions inside magnetic fusion devices. The diagnostic's purpose is to contribute to an integrated understanding of plasma-material interactions in magnetic fusion, which is severely hindered by a dearth of in situ material surface diagnosis. The diagnostic aims to remotely generate isotopic concentration maps on a plasma shot-to-shot timescale that cover a large fraction of the plasma-facing surface inside of a magnetic fusion device without the need for vacuum breaks or physical access to the material surfaces. Our instrument uses a compact (∼1 m), high-current (∼1 milliamp) radio-frequency quadrupole accelerator to inject 0.9 MeV deuterons into the Alcator C-Mod tokamak at MIT. We control the tokamak magnetic fields – in between plasma shots – to steer the deuterons to material surfaces where the deuterons cause high-Q nuclear reactions with low-Z isotopes ∼5 μm into the material. The induced neutrons and gamma rays are measured with scintillation detectors; energy spectra analysis provides quantitative reconstruction of surface compositions. An overview of the diagnostic technique, known as accelerator-based in situ materials surveillance (AIMS), and the first AIMS diagnostic on the Alcator C-Mod tokamak is given. Experimental validation is shown to demonstrate that an optimized deuteron beam is injected into the tokamak, that low-Z isotopes such as deuterium and boron can be quantified on the material surfaces, and that magnetic steering provides access to different measurement locations. The first AIMS analysis, which measures the relative change in deuterium at a single surface location at the end of the Alcator C-Mod FY2012 plasma campaign, is also presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

LLE Review 116 (July-September 2008)

This issue has the following articles: (1) Optimizing Electron-Positron Pair Production on kJ-Class High-Intensity Lasers for the Purpose of Pair-Plasma Creation; (2) Neutron Yield Study of Direct-Drive, Low-Adiabat Cryogenic D2 Implosions on OMEGA; (3) Al 1s-2p Absorption Spectroscopy of Shock-Wave Heating and Compression in Laser-Driven Planar Foil; (4) A Measurable Lawson Criterion and Hydro-Equivalent Curves for Inertial Confinement Fusion; (5) Pulsed-THz Characterization of Hg-Based, High-Temperature Superconductors; (6) LLE's Summer High School Research Program; (7) FY08 Laser Facility Report; and (8) National Laser Users Facility and External Users Programs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The impact of argon addition on hydrogen superpermeation through palladium alloy metal foil pumps during direct internal recycling

Metal foil pumps (MFPs) are a leading technology for the direct internal recycling (DIR) of hydrogen isotopes from the plasma exhaust of fusion devices. MFPs rely on the concept of superpermeation, where plasma-generated atomic hydrogen absorbs into the metal foil, rapidly diffuses, and desorbs downstream. To date, studies of superpermeation have predominantly employed pure hydrogen or in some cases trace levels of impurities. In practice the plasma exhaust may contain significant levels of plasma enhancement gases such as argon, an inert gas with metastable states that can enhance the plasma. In this work, we systematically study the impact of Ar addition on the performance of PdCu and PdAg MFPs at low temperature. Performance was strongly dependent on the DIR fraction. At negligible DIR levels Ar addition did not significantly improve the flux over dilution effects. However, under appreciable DIR operation the flux was enhanced up to 90 % relative to pure H 2 , with the optimal concentration range being 5–10 % Ar exiting the system. Beyond 15 % addition plasma enhancement benefits were offset by dilution. Performance correlated with the atomic H emission, and benefits were more pronounced for PdAg than PdCu. Operation at significant DIR levels dramatically alters the flow dynamics resulting in concentration gradients near the MFP, creating plasma conditions that promote H 2 dissociation.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A lightweight Fe–Mn–Al–C austenitic steel with ultra-high strength and ductility fabricated via laser powder bed fusion

Lightweight Fe–Mn–Al–C steels have become a topic of significant interest for the defense and automotive industries. These alloys can maintain high strength and ductility while also reducing weight in structural applications. Conventionally processed Fe–Mn–Al–C austenitic steels with high Al content (~9 wt%) demonstrate greater than 1.5 GPa strength with 35% elongation. Several recent studies have demonstrated success in fabricating steel parts using laser powder bed fusion (L-PBF) additive manufacturing (AM), which can generate near-net-shape components with complex geometries and is capable of local microstructural control. However, studies on L-PBF processing of Fe–Mn–Al–C alloys have focused on low Al content (<5 wt%) compositional regimes representing alloys that undergo transformation-induced plasticity (TRIP) and twinning-induced plasticity (TWIP). Here, in this study, we present the effects of L-PBF processing on the microstructure and mechanical properties of an Fe–30Mn–9Al–1Si-0.5Mo-0.9C austenitic steel. A process optimization framework is employed to determine an ideal L-PBF processing space that will result in >99% density parts. Implementing this framework resulted in near-fully dense specimens fabricated over a broad range of process parameters. Additionally, two bi-directional scan rotation strategies (90° and 67°) were applied to understand their effects on texture and anisotropy in this material. As-printed specimens displayed considerable work-hardening characteristics with average strengths of up to 1.3 GPa and 36% elongation in the build direction. However, solidification microcracks oriented in the build direction resulted in anisotropy in tensile strength and ductility resulting in average strengths of 1.1 GPa and 20% elongation perpendicular to the build direction. The successful L-PBF fabrication of Fe–30Mn–9Al–1Si-0.5Mo-0.9C presented here is expected to open new avenues for weight reduction in structural applications with a high degree of control over part topology.

36 MATERIALS SCIENCE↗

Wavelength-detuning cross-beam energy transfer mitigation scheme for direct drive: Modeling and evidence from National Ignition Facility implosions

Here, cross-beam energy transfer (CBET) results from two-beam energy exchange via seeded stimulated Brillouin scattering, which detrimentally reduces laser-energy absorption for direct-drive inertial confinement fusion. Consequently, ablation pressure and implosion velocity suffer from the decreased absorption, reducing target performance in both symmetric and polar direct drive. Additionally, CBET alters the time-resolved scattered-light spectra and redistributes absorbed and scattered-light–changing shell morphology and low-mode drive symmetry. Mitigating CBET is demonstrated in inertial confinement implosions at the National Ignition Facility by detuning the laser-source wavelengths (±2.3 Å UV) of the interacting beams. In polar direct drive, wavelength detuning was shown to increase the equatorial region velocity experimentally by 16% and to alter the in-flight shell morphology. These experimental observations are consistent with design predictions of radiation–hydrodynamic simulations that indicate a 10% increase in the average ablation pressure. These results indicate that wavelength detuning successfully mitigates CBET. Simulations predict that optimized phase plates and wavelength-detuning CBET mitigation utilizing the three-legged beam layout of the OMEGA Laser System significantly increase absorption and achieve >100-Gbar hot-spot pressures in symmetric direct drive.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of linear modes in cylindrical resistive magnetohydrodynamics with a resistive wall, plasma rotation, and complex gain

Feedback stabilization of magnetohydrodynamic (MHD) modes in a tokamak is studied in a cylindrical model with a resistive wall, plasma resistivity, viscosity, and toroidal rotation. The control is based on a linear combination of the normal and tangential components of the magnetic field just inside the resistive wall. The feedback includes complex gain, for both the normal and for the tangential components, and it is known that the imaginary part of the feedback for the former is equivalent to plasma rotation [J. M. Finn and L. Chacon, Phys. Plasmas 11, 1866 (2004)]. The work includes (1) analysis with a reduced resistive MHD model for a tokamak with finite β and with stepfunction current density and pressure profiles, and (2) computations with a full compressible visco-resistive MHD model with smooth decreasing profiles of current density and pressure. The equilibria are stable for β = 0 and the marginal stability values β{sub rp,rw} < β{sub rp,iw} < β{sub ip,rw} < β{sub ip,iw} (resistive plasma, resistive wall; resistive plasma, ideal wall; ideal plasma, resistive wall; and ideal plasma, ideal wall) are computed for both models. The main results are: (a) imaginary gain with normal sensors or plasma rotation stabilizes below β{sub rp,iw} because rotation suppresses the diffusion of flux from the plasma out through the wall and, more surprisingly, (b) rotation or imaginary gain with normal sensors destabilizes above β{sub rp,iw} because it prevents the feedback flux from entering the plasma through the resistive wall to form a virtual wall. A method of using complex gain G{sub i} to optimize in the presence of rotation in this regime with β > β{sub rp,iw} is presented. The effect of imaginary gain with tangential sensors is more complicated but essentially destabilizes above and below β{sub rp,iw}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Machine learning surrogate models for Landau fluid closure

The first result of applying the machine/deep learning technique to the fluid closure problem is presented in this letter. As a start, three different types of neural networks (multilayer perceptron (MLP), convolutional neural network (CNN) and two-layer discrete Fourier transform (DFT) network) were constructed and trained to learn the well-known Hammett-Perkins Landau fluid closure in configuration space. We found that in order to train a well-preformed network, a minimum size of training data set is needed; MLP also requires a minimum number of neurons in the hidden layers equals to the degrees of freedom in Fourier space despite training data is fed in configuration space. Out of three models DFT performs the best for the clean data most likely due to the existence of nice Fourier expression for Hammett-Perkins closure but it is least robust with respect to input noise. Overall, with appropriate tuning and optimization, all three neural networks are able to accurately predict Hammett-Perkins closure and reproduce the inherit nonlocal feature, suggesting a promising path to calculate more sophisticated closures with the machine/deep learning technique.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Managing photon flux in a miniaturized photoionization detector

Miniaturized photoionization detectors (PIDs) are used in conjunction with gas chromatography systems to detect volatile compounds in gases by collecting the current from the photoionized gas analytes. PIDs should be inexpensive and compatible with a wide range of analyte species. One such PID is based on the formation of a He plasma in a dielectric barrier discharge (DBD), which generates vacuum UV (VUV) photons from excited states of He to photoionize gas analytes. There are several design parameters that can be leveraged to increase the ionizing photon flux to gas analytes to increase the sensitivity of the PID. To that end, the methods to maximize the photon flux from a pulsed He plasma in a DBD-PID were investigated using a two-dimensional plasma hydrodynamics model. The ionizing photon flux originated from the resonance states of helium, He(3P) and He(2 1 P), and from the dimer excimer He 2 *. While the photon flux from the resonant states was modulated over the voltage pulse, the photon flux from He 2 * persisted long after the voltage pulse passed. Several geometrical optimizations were investigated, such as using an array of pointed electrodes. However, increasing the capacitance of the dielectric enclosing the plasma chamber had the largest effect on increasing the VUV photon fluence to gas analytes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flying focus and its application to plasma-based laser amplifiers

Combining a chirped laser pulse with a chromatic lens yields a flying focus—a laser focus that moves dynamically in time. This provides control over the propagation of the peak laser intensity within an extended focal region that can be many times larger than the system’s Rayleigh length. Any velocity is achievable, including backward relative to the laser propagation direction. Previous simulation results have shown that a laser beam with a flying focus can create a counter-propagating ionization wave and subsequently pump a frequency-downshifted laser via the stimulated Raman scattering instability. Compared to a conventional Raman amplification scheme, several advantages were highlighted, including improved temperature control, plasma uniformity, and precursor growth mitigation. Here, we extend those results to demonstrate additional benefits: (1) the flying focus makes it possible for an unseeded Raman amplifier to produce a short, high-intensity beam; and (2) the flying focus minimizes collisional absorption of the pump, facilitating amplifier operation at higher plasma densities. Preliminary experiments have laid the groundwork for a high-performance plasma-based laser amplifier. The focal spot dynamics were initially confirmed at low intensity. It was subsequently demonstrated that ionization waves of arbitrary velocity can be produced at higher intensity. Here, we show a counter-propagating ionization front moving at approximately the speed of light—the optimal result for a Raman amplifier.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties and parameters of the electron beam injected into the mirror magnetic trap of a plasma accelerator

The parameters of the injector of an axial plasma beam injected into a plasma accelerator operating on the basis of gyroresonance acceleration of electrons in the reverse magnetic field are determined. The trapping of the beam electrons into the regime of gyroresonance acceleration is numerically simulated by the particle- in-cell method. The optimal time of axial injection of the beam into a magnetic mirror trap is determined. The beam parameters satisfying the condition of efficient particle trapping into the gyromagnetic autoresonance regime are found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development and verification of the pyIsoDep depletion package for nuclear thermal propulsion reactors

Nuclear thermal propulsion technology is currently being developed by the National Air and Space Administration for future manned Mars missions. There are multiple on-going activities to develop and enhance computational capabilities, single- and multi-physics, to advance the readiness level of this technology. The prediction of short-lived fission products is crucial to understand the reactivity penalty and the decay heat production during the different burnout stages of the vehicle. Generally, the solution entails coupled neutronic-depletion analysis. However, such simulations are somewhat expensive, especially if the duration of each engine burn is to be optimized. Therefore, there is a need to complement such high-fidelity techniques with time-efficient alternatives that do not require the sequential neutronic and depletion analysis. This paper details the methods and capabilities of pyIsoDep, an open-source code used for depletion analysis of nuclear thermal propulsion reactors. The package is general, in principle, and thus can be applied to any fission system, and can potentially be extended for fusion systems. The package was developed to provide a flexible and efficient alternative to pre-existing higher order depletion codes that could integrate well into mission and transient analysis of nuclear thermal propulsion reactors. Finally, this paper presents a validation and verification of pyIsoDep against analytical and Serpent-generated solutions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Comparison of Electron Beam and Laser Beam Powder Bed Fusion Additive Manufacturing Process for High Temperature Turbine Component Materials, Phase II. CRADA Final Report

The evolving additive manufacturing (AM) technology is now at the point where some metallic turbine components are being fabricated for both development and production purposes. The goal of this phase II project is to continue the evaluation of AM Nickel Alloy X fabricated by electron beam (EB) or laser beam (LB) powder bed fusion (PBF) process for gas turbine applications. Microstructure, mechanical and oxidation properties characterization was conducted on test specimens produced with powders of different chemistries within the typical material specification range. Powders with high Silicon (Si) content for the LB-PBF and low Si content for the EB-PBF displayed significant cracking levels in the AM Nickel Alloy X material. Accordingly, optimum fatigue performance would require careful control of powder chemistry, optimization of the fabrication parameters for a given powder and use of hot isostatic pressing (HIP) post treatment. Oxidation testing conducted at 1472°F (800ºC) in air showed that the roughness of the EB-PBF specimens led to an increase in specimen mass change, but overall the AM specimens exhibited oxidation behavior at 1472°F (800ºC) that is appropriate for applications in gas turbine engines. Assessment of the geometric capability of the LB-PBF and EBPBF systems using artifacts representative of turbine component geometries revealed that the LB-PBF process is well-suited for the fabrication of intricate geometries needed for turbine engine fuel injector components, but further process development is required to improve the EB-PBF system feature resolution.

36 MATERIALS SCIENCE↗