Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microstructure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Fe-24 wt.%Cr-4.1 wt.%C hardfacing alloy: Microstructure and carbide refinement mechanisms with ceria additive

The microstructure and carbide refinement mechanisms of Fe-24 wt.%Cr-4.1 wt.%C hardfacing alloys with 0 wt.%, 0.5 wt.%, 1.0 wt.%, 2 wt.%, and 4 wt.% ceria additives have been systematically investigated in this work. Optical microscopy, field emission scanning electron microscopy with energy dispersive spectrometer, and X-ray diffraction were collectively used to study the microstructure, the phase components, and the chemical formation of inclusion formed in the welding process. Wear-resistance of the alloys was comparatively studied using an abrasive wear testing machine. The structure analysis results show that the Fe-Cr-C hardfacing alloy mainly consists of martensite, retained austenite, MC carbide and M{sub 7}C{sub 3} carbide. With increasing ceria additive contents, the average size of the primary M{sub 7}C{sub 3} carbide decreases and reaches a most refined state in the alloy with 2 wt.% ceria additives. Comparative wear tests data shows that the wear resistance of the hardfacing alloys with ceria additives is better than that without ceria additive. In a good agreement with the carbide refinement results, the wear resistance of the alloy reaches an optimum level in the sample with 2 wt.% ceria additive. The main RE inclusion type identified with in-situ XRD analysis is RE inclusion Ce{sub 2}O{sub 2}S. Thermodynamics calculation confirms that this type of RE inclusion could precipitate prior to M{sub 7}C{sub 3} carbides, and act as a heterogeneous nucleus for M{sub 7}C{sub 3} in the welding process, which effectively provides a mechanism for significant refinement of the M{sub 7}C{sub 3} carbide and improves its wear resistance. - Graphical Abstract: Rare Earth inclusion (Ce{sub 2}O{sub 2}S) distributes in the primary M{sub 7}C{sub 3} carbide. Moreover, Ce{sub 2}O{sub 2}S, which acts as heterogeneous nuclei of the primary M{sub 7}C{sub 3} carbide, is medium effective. Therefore, the primary M{sub 7}C{sub 3} carbide has been refined. Highlights: Black-Right-Pointing-Pointer Micro-hardness of primary M{sub 7}C{sub 3} carbide in Fe-Cr-C hardfacing alloy is 1594 HV. Black-Right-Pointing-Pointer RE inclusion Ce{sub 2}O{sub 2}S can be observed in the primary M{sub 7}C{sub 3} carbide. Black-Right-Pointing-Pointer Ce{sub 2}O{sub 2}S as heterogeneous nuclei of the Cr{sub 7}C{sub 3} is medium effective. Black-Right-Pointing-Pointer Primary carbide is most refined with 2 wt.% ceria additive.

36 MATERIALS SCIENCE↗

Surface working of 304L stainless steel: Impact on microstructure, electrochemical behavior and SCC resistance

The effect of surface working operations on the microstructure, electrochemical behavior and stress corrosion cracking resistance of 304L stainless steel (SS) was investigated in this study. The material was subjected to (a) solution annealing (b) machining and (c) grinding operations. Microstructural characterization was done using stereo microscopy and electron back scattered diffraction (EBSD) technique. The electrochemical nature of the surfaces in machined, ground and solution annealed condition were studied using potentiodynamic polarization and scanning electrochemical microscopy (SECM) in borate buffer solution. The stress corrosion cracking resistance of 304L SS in different conditions was studied by exposing the samples to boiling MgCl{sub 2} environment. Results revealed that the heavy plastic deformation and residual stresses present near the surface due to machining and grinding operations make 304L SS electrochemically more active and susceptible to stress corrosion cracking. Ground sample showed highest magnitude of current density in the passive potential range followed by machined and solution annealed 304L SS. Micro-electrochemical studies established that surface working promotes localized corrosion along the surface asperities which could lead to crack initiation. - Highlights: Black-Right-Pointing-Pointer Machining/grinding produce extensive grain fragmentation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding result in martensitic transformation near the surface of 304L SS. Black-Right-Pointing-Pointer Machining/grinding drastically reduce the SCC resistance of 304L SS in chloride. Black-Right-Pointing-Pointer Machining/grinding make the surface of 304L SS electrochemically much more active. Black-Right-Pointing-Pointer SECM study reveal that preferential dissolution takes place along surface asperities.

36 MATERIALS SCIENCE↗

Microstructure and micro-Raman studies of nitridation and structure transition of gallium oxide nanowires

Here we present a detailed study on nitridation and structure transition in monoclinic gallium oxide ({beta}-Ga{sub 2}O{sub 3}) nanowires grown on Si substrates with chemical vapor phase epitaxy. The nanowires were systematically nitridated at different temperatures. Their morphologies and microstructures were precisely characterized using field-emission scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and confocal micro-Raman spectroscopy. It is found that heat treatment of Ga{sub 2}O{sub 3} nanowires in the gas of ammonia results in rich substructures including the Ga{sub 2}O{sub 3} phase, the crystalline GaN phase, and other meta structures. The identification of these structures helps to understand some interesting phenomena observed in nanostructures, such as the microstructural origin of the unknown Raman lines in GaN nanowires. - Highlights: Black-Right-Pointing-Pointer Nitridation and structure transition of Ga{sub 2}O{sub 3} significantly depend on temperature. Black-Right-Pointing-Pointer G-N bonds form at lower temperatures but the Ga{sub 2}O{sub 3} lattice is still dominant. Black-Right-Pointing-Pointer Amorphous GaN coexists with crystalline Ga{sub 2}O{sub 3} at higher temperatures. Black-Right-Pointing-Pointer Crystalline GaN with distinct morphology is obtained at much higher temperatures.

36 MATERIALS SCIENCE↗

Simulated annealing reconstruction and characterization of the three-dimensional microstructure of a LiCoO{sub 2} Lithium-ion battery cathode

We adapt the simulated annealing approach for reconstruction of the 3D microstructure of a LiCoO{sub 2} cathode from a commercial Li-ion battery. The real size distribution curve of LiCoO{sub 2} particles is applied to regulate the reconstruction process. By discretizing a 40 × 40 × 40 μm cathode volume with 8,000,000 numerical cubes, the cathode involving three individual phases: 1) LiCoO{sub 2} as active material, 2) pores or electrolyte, and 3) additives (polyvinylidene fluoride + carbon black) is reconstructed. The microstructural statistical properties required in the reconstruction process are extracted from 2D focused ion beam/scanning electron microscopy images or obtained by analyzing the powder mixture used to make the cathode. Characterization of the reconstructed cathode gives important structural and transport properties including the two-point correlation functions, volume-specific surface area between phases, tortuosity and geometrical connectivity of individual phase. - Highlights: • Simulated annealing approach is adapted for 3D reconstruction of LiCoO{sub 2} cathode. • Real size distribution of LiCoO{sub 2} particles is applied in reconstruction process. • Reconstructed cathode accords with real one at important statistical properties. • Effective electrode-characterization approaches have been established. • Extensive characterization gives important structural properties, say, tortuosity.

36 MATERIALS SCIENCE↗

Transmission electron microscopy study of the microstructure of a Ti–Fe–Zr alloy

A Ti–35Fe–30Zr (at.%) alloy was prepared by cold crucible levitation melting, and its microstructure was characterized. Electron microscope observations revealed a microstructure with a bi-modal phase size distribution. One phase was identified as a monoclinic TiFeZr compound with lattice parameters a = 0.895 nm, b = 0.502 nm, c = 0.969 nm, and α = 119.4° in C2 (space group). A bcc β-TiZr phase with lattice parameter a = 0.341 nm coexisted with the monoclinic phase. The mechanisms of phase formation are discussed. - Highlights: • Monoclinic TiFeZr phase was observed in as-cast Ti–35Fe–30Zr (at.%) alloy. • The space group of monoclinic TiFeZr phase is C2. • The β-TiZr phase formed in as-cast Ti–35Fe–30Zr alloy.

36 MATERIALS SCIENCE↗

Microstructural and mechanical characterization of Al–Zn–Si nanocomposites

In this paper the addition of silicon nanoparticles into Al–Zn alloys to form metallic matrix nanocomposites by mechanical alloying process was investigated. The influence of various process parameters such as milling time and Si concentration in the Al–Zn matrix has an interesting effect on the microstructure and mechanical properties of the synthesized nanocomposites. The microstructural characterization of the nanocomposites was evaluated by transmission electron microscopy and energy dispersive X-ray spectroscopy (TEM–EDXS) and the mechanical properties were measured by nanoindentation and micro-hardness tests. The results showed that during mechanical milling Si is added to the Al–Zn matrix achieving a uniform and homogeneous dispersion. After solidification, it forms small particles of AlZnSi with blocky morphology in interdendritic regions. The nanoindentation profiles showed that the elastic modulus and hardness properties increase with increasing milling time. However, a high concentration of Si (> 1.2 wt.%) results in a saturation of Si in the Al–Zn matrix, which adversely affects the mechanical properties. Thus, it is important to tune the milling time and concentration of Si added to the Al–Zn alloys to control the growth of brittle phases that result in reduction of the mechanical properties of the material. - Highlights: • A novel technique for addition of Si nanocomposites into Al–Zn liquid alloy is reported. • Good dispersion and homogeneity of Si in the Al–Zn matrix are obtained. • Increasing Si content above 1.2 wt.% decreases the mechanical properties of Al–Zn alloy. • The saturation point of Si in 1.2 wt.% differs from Galvalume® composition. • The Al–Zn–1.5Si alloy with addition of nanocomposite shows 5.7 GPa of hardness.

36 MATERIALS SCIENCE↗

Nanocrystalline Cs{sub x}WO{sub 3} particles: Effects of N{sub 2} annealing on microstructure and near-infrared shielding characteristics

In order to further improve the near-infrared shielding properties of cesium tungsten bronze (Cs{sub x}WO{sub 3}) for solar filter applications, Cs{sub x}WO{sub 3} particles were prepared by solvothermal reaction method and the effects of nitrogen annealing on the microstructure and near-infrared shielding properties of Cs{sub x}WO{sub 3} were investigated. The obtained Cs{sub x}WO{sub 3} samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and spectrophotometer. The results indicate that nanosheet-like Cs{sub x}WO{sub 3} particles with hexagonal structure began to transform into nanorods after annealed at temperature higher than 600 °C. The near-infrared shielding properties of Cs{sub x}WO{sub 3} particles could be further improved by N{sub 2} annealing at 500–700 °C. Particularly, the 500 °C-annealed Cs{sub x}WO{sub 3} samples in the N{sub 2} atmosphere showed best near-infrared shielding properties. It was suggested that the excellent near-infrared shielding ability of the 500 °C-annealed Cs{sub x}WO{sub 3} samples is correlated with its minimum O/W atomic ratio and most oxygen vacancies. Highlights: • N{sub 2} annealing could further improve the near-infrared (NIR) shielding of Cs{sub x}WO{sub 3}. • Effects of N{sub 2} annealing on microstructure and NIR shielding of Cs{sub x}WO{sub 3} were studied. • The 500 °C-N{sub 2}-annealed Cs{sub x}WO{sub 3} exhibited minimum O/W ratio and most oxygen vacancies. • The 500 °C-N{sub 2}-annealed Cs{sub x}WO{sub 3} particles exhibited best NIR shielding properties.

36 MATERIALS SCIENCE↗

Microstructural study and densification analysis of hot work tool steel matrix composites reinforced with TiB{sub 2} particles

Hot work tool steels are characterized by good toughness and high hot hardness but are less wear resistant than other tooling materials, such as high speed steel. Metal matrix composites show improved tribological behavior, but not much work has been done in the field of hot work tool steels. In this paper TiB{sub 2}-reinforced hot work tool steel matrix composites were produced by spark plasma sintering (SPS). Mechanical alloying (MA) was proposed as a suited process to improve the composite microstructure. Density measurements and microstructure confirmed that MA promotes sintering and produces a fine and homogeneous dispersion of reinforcing particles. X-ray diffraction patterns of the sintered composites highlighted the formation of equilibrium Fe{sub 2}B and TiC, as predicted by thermodynamic calculations using Thermo-Calc® software. Scanning electron microscopy as well as scanning Kelvin probe force microscopy highlighted the reaction of the steel matrix with TiB{sub 2} particles, showing the formation of a reaction layer at the TiB{sub 2}-steel interface. Phase investigations pointed out that TiB{sub 2} is not chemically stable in steel matrix because of the presence of carbon even during short time SPS. - Highlights: • TiB{sub 2} reinforced steel matrix composites were produced by spark plasma sintering. • TiB{sub 2} was successfully dispersed in the steel matrix by mechanical alloying. • Steel and TiB{sub 2} react during sintering forming equilibrium Fe{sub 2}B and TiC. • The new phases were investigated by means of AFM, Volta potential and XRD analyses.

36 MATERIALS SCIENCE↗

Creep property and microstructure evolution of a nickel-base single crystal superalloy in [011] orientation

The creep property and microstructure evolution of a single crystal superalloy with [011] orientation were investigated at the temperatures of 700 °C, 900 °C and 1040 °C. It is shown that there exist stages of primary, steady-state, and tertiary creep under the lower temperature 700 °C. As the temperature increases to high temperatures of 900 °C and 1040 °C, steady-state creep stage is reduced or disappears and the shape of creep curves is dominated by an extensive tertiary stage. The minimum creep strain rate exhibits power law dependence on the applied stress; the stress exponents at 700 °C, 900 °C and 1040 °C are 28, 13 and 6.5, respectively. Microstructure observation shows that the morphologies of γ′ phase almost keep original shape at the lower temperature 700 °C and high applied stress. With the increasing creep temperature, γ′ precipitates tend to link together and form lamellar structure at an angle of 45° inclined to the applied stress. Transmission electron microscopy (TEM) investigations reveal that multiple < 110 > (111) slip systems gliding in the matrix channels and shearing γ′ precipitates by stacking faults or bending dislocation pairs are the main deformation mechanism at the lower temperature of 700 °C. At the high temperatures of 900 °C and 1040 °C, dislocation networks are formed at γ/γ′ interfaces and the γ′ rafts are sheared by dislocation pairs. - Highlights: • Creep properties of < 011 >-oriented single crystal superalloys were investigated. • γ′ phases become rafting at an angle of 45° inclined to the applied stress. • Creep deformation mechanisms depend on temperature and stress.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer

Diffusion bonding between W and steel using V/Ni composite interlayer was carried out in vacuum at 1050 °C and 10 MPa for 1 h. The microstructural examination and mechanical property evaluation of the joints show that the bonding of W to steel was successful. No intermetallic compound was observed at the steel/Ni and V/W interfaces for the joints bonded. The electron probe microanalysis and X-ray diffraction analysis revealed that Ni{sub 3}V, Ni{sub 2}V, Ni{sub 2}V{sub 3} and NiV{sub 3} were formed at the Ni/V interface. The tensile strength of about 362 MPa was obtained for as-bonded W/steel joint and the failure occurred at W near the V/W interface. The nano-indentation test across the joining interfaces demonstrated the effect of solid solution strengthening and intermetallic compound formation in the diffusion zone. - Highlights: • Diffusion bonding of W to steel was realized using V/Ni composite interlayer. • The interfacial microstructure of the joint was clarified. • Several V–Ni intermetallic compounds were formed in the interface region. • The application of V/Ni composite interlayer improved the joining quality.

36 MATERIALS SCIENCE↗

Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel

An Fe-6.5 wt.% Si-0.3 wt.% Al as-cast sheet was produced by twin-roll strip casting process, then treated with hot rolling, warm rolling and annealing. A detailed study of the microstructure and texture evolution at different processing stages was carried out by optical microscopy, X-ray diffraction and electron backscattered diffraction analysis. The initial as-cast strip showed strong columnar grains and pronounced < 001 >//ND texture. The hot rolled and warm rolled sheets were characterized by large amounts of shear bands distributed through the thickness together with strong < 110 >//RD texture and weak < 111 >//ND texture. After annealing, detrimental < 111 >//ND texture almost disappeared while beneficial (001)<210 >, (001)<010 >, (115)<5 − 10 1 > and (410) < 001 > recrystallization textures were formed, thus the magnetic induction of the annealed sheet was significantly improved. The recrystallization texture in the present study could be explained by preferred nucleation and grain growth mechanism. - Highlights: • A high silicon as-cast strip with columnar structure was produced. • A thin warm rolled sheet without large edge cracks was obtained. • Microstructure and texture evolution at each stage were investigated. • Beneficial (001)<210 >, (001)<010 >, (410)<001 > recrystallization textures were formed. • The magnetic induction of annealed sheet was significantly improved.

36 MATERIALS SCIENCE↗

Layered-structural monoclinic–orthorhombic perovskite La{sub 2}Ti{sub 2}O{sub 7} to orthorhombic LaTiO{sub 3} phase transition and their microstructure characterization

The layered-structural ceramics, such as lanthanum titanate (La{sub 2}Ti{sub 2}O{sub 7}), have been known for their good temperature and low dielectric loss at microwave frequencies that make them good candidate materials for high frequency applications. However, few studies have been conducted on the synthesis optimization by sol gel reaction, in particular by acrylamide polymerization route. The interest in La{sub 2}Ti{sub 2}O{sub 7} ceramic has been greatly increased recently due to the effect of oriented grains. This anisotropy of the microstructure leads to anisotropy in dielectric, electrical and mechanical properties. In this study, grain oriented lanthanum titanate was produced by the sol–gel acrylamide polymerization route. The characterizations of the samples were achieved by thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and transmission electron microscopy (TEM). X-ray diffraction indicates that the formation of monoclinic perovskite La{sub 2}Ti{sub 2}O{sub 7} nanocrystals is a necessary first step to obtain orthorhombic LaTiO{sub 3} nanocomposites (with space group Pbnm). In this work we identified that the monoclinic perovskite La{sub 2}Ti{sub 2}O{sub 7} with space group P2{sub 1} transforms its structure into one with the orthorhombic space group Cmc2{sub 1} at approximately 1073 K. The microstructure associated consisted of flaky monoclinic La{sub 2}Ti{sub 2}O{sub 7} nanocomposites in comparison with round-shaped LaTiO{sub 3} nanocomposites. - Highlights: • The flaky-like La{sub 2}Ti{sub 2}O{sub 7} compound was synthesized by sol–gel acrylamide route. • Simultaneous monitoring of the DTA and XRD with temperature was performed. • Phase transformation characterization of La{sub 2}Ti{sub 2}O{sub 7} has been carried out. • The variation of the La{sub 2}Ti{sub 2}O{sub 7} and LaTiO{sub 3} grain morphology has been compared.

36 MATERIALS SCIENCE↗

Effects of Mo on microstructure of as-cast 28 wt.% Cr–2.6 wt.% C–(0–10) wt.% Mo irons

Microstructures of as-cast 28 wt.% Cr–2.6 wt.% C irons containing (0–10) wt.% Mo with the Cr/C ratio of about 10 were studied and related to hardness. The experimental irons were cast into dry sand molds. Microstructural investigation was performed by light microscopy, X-ray diffractometry, scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectrometry. It was found that the iron with about 10 wt.% Mo was eutectic/peritectic, whereas the others with less Mo content were hypoeutectic. The matrix in all irons was austenite, partly transformed to martensite during cooling. Mo addition promoted the formation of M{sub 23}C{sub 6} and M{sub 6}C. At 1 wt.% Mo, multiple eutectic carbides including M{sub 7}C{sub 3}, M{sub 23}C{sub 6} and M{sub 6}C were observed. M{sub 23}C{sub 6} existed as a transition zone between eutectic M{sub 7}C{sub 3} and M{sub 6}C, indicating a carbide transition as M{sub 7}C{sub 3}(M{sub 2.3}C) → M{sub 23}C{sub 6}(M{sub 3.8}C) → M{sub 6}C. At 6 wt.% Mo, multiple eutectic carbides including M{sub 7}C{sub 3} and M{sub 23}C{sub 6} were observed together with fine cellular/lamellar M{sub 6}C aggregates. In the iron with 10 wt.% Mo, only eutectic/peritectic M{sub 23}C{sub 6} and M{sub 6}C were found without M{sub 7}C{sub 3}. Mo distribution to all carbides has been determined to be increased from ca. 0.4 to 0.7 in mass fraction as the Mo content in the irons was increased. On the other hand, Cr distribution to all carbides is quite constant as ca. 0.6 in mass fraction. Mo addition increased Vickers macro-hardness of the irons from 495 up to 674 HV{sub 30}. High Mo content as solid-solution in the matrix and the formation of M{sub 6}C or M{sub 23}C{sub 6} aggregates were the main reasons for hardness increase, indicating potentially improved wear performance of the irons with Mo addition. - Highlights: • Mo promoted the formation of M{sub 23}C{sub 6} and M{sub 6}C in the irons with Cr/C ratio of about 10. • M{sub 23}C{sub 6} has higher Fe/Cr and Mo/Cr atm% ratios than M{sub 7}C{sub 3}. • Si content and high Mo content over about 9 atm% are characteristics of M{sub 6}C. • No M{sub 7}C{sub 3} was found at 10 wt.% Mo addition, only M{sub 23}C{sub 6} and M{sub 6}C presented. • High Mo matrices and M{sub 23}C{sub 6}/M{sub 6}C aggregates increased iron macro-hardness.

36 MATERIALS SCIENCE↗

Microstructural analysis of martensite constituents in quenching and partitioning steels

A methodology to distinguish martensite formed in the first quench (M1) from martensite formed in the second quench (M2) of the Quenching and Partitioning process is presented, enabling the study of the structural characteristics of both microstructural constituents. Investigations show that M1 displays larger block size and less lattice imperfections than M2, differences that can be related to their respective carbon contents. - Highlights: • An approach to distinguish “old” from “new” martensite in Q and P steels is presented • Methodology allows separate characterization of microstructure and crystallography “Old” martensite has larger block size and more perfect lattice than the “new” one • The differences between the old and new martensite depend on their carbon contents.

36 MATERIALS SCIENCE↗

Effect of substrates on microstructure and mechanical properties of nano-eutectic 1080 steel produced by aluminothermic reaction

Nano-eutectic bulk 1080 carbon steel was prepared on glass and copper substrates by an aluminothermic reaction casting. The microstructure of the steel was analyzed by an optical microscope, transmission electron microscopy, an electron probe micro-analyzer, a scanning electron microscope and X-ray diffraction. Results show that the microstructure of the steel consisted of a little cementite and lamellar eutectic pearlite. Average lamellar spacing of the pearlite prepared on copper and glass substrates was about 230 nm and 219 nm, respectively. Volume fraction of the pearlite of the two steels was about 95%. Hardness of the steel was about 229 and 270 HV. Tensile strength was about 610 and 641 MPa and tensile elongation was about 15% and 8%. Compressive strength was about 1043 and 1144 MPa. Compared with the steel prepared on copper substrate, the steel prepared on glass substrate had smaller lamellar spacing of the pearlite phase and higher strength, and low ductility due to the smaller spacing. - Highlights: • 1080-carbon steels were successfully prepared by an aluminothermic reaction casting. • Lamellar spacing of the nanoeutetic pearlite is less than 250 nm. • The compressive strength of the steel is about 1144 MPa. • The tensile ductility of the steel is about 15%.

36 MATERIALS SCIENCE↗

The effect of annealing on the transformation and the microstructure of Mn{sub 1−x}Cr{sub x}CoGe alloys

In this work the effect of different thermal treatments on the transformation behavior of Mn{sub 1−x}Cr{sub x}CoGe alloys, with x = 0.15 and 0.20 has been analyzed. The changes in the transformation temperatures have been studied by differential scanning calorimetry (DSC). The results show that the structural transition temperature depends on the previous annealing. However, under the same heat treatment no significant change is observed on the transformation temperatures when replacing Mn by Cr. The microstructural evolution has been monitored using in-situ X-ray diffraction and transmission electron microscopy. The effect of an applied magnetic field on the transformation has been explored by SQUID magnetometry. Two different magnetic transitions are found: a first order paramagnetic (PM) to ferromagnetic (FM) corresponding to the transformation observed by calorimetry and a re-entrant spin glass to ferromagnetic transition. - Highlights: • The annealing conditions determine the magnetostructural transition. • A laminar microstructure along preferential planes observed by TEM • A RSG to ferromagnetic transition at low temperatures is detected.

36 MATERIALS SCIENCE↗

Microstructure evolution during annealing of TiAl/NiCoCrAl multilayer composite prepared by EB-PVD

TiAl/NiCoCrAl laminate composite sheet with a thickness of 0.4–0.6 mm as well as a dimension of 150 mm × 100 mm was fabricated successfully by using electron beam physical vapor deposition (EB-PVD) method. The annealing treatment was processed at 1123 and 1323 K for 3 h in a high vacuum atmosphere, respectively. The phase composition and microstructure of TiAl/NiCoCrAl microlaminated sheet have been analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Based on the sheet characterization and results of the microstructure evolution during annealing treatment process, the diffusion mechanism of interfacial reaction in TiAl/NiCoCrAl microlaminate was investigated and discussed.

36 MATERIALS SCIENCE↗

Effects of Sn addition on the microstructure, mechanical properties and corrosion behavior of Ti–Nb–Sn alloys

Ti and Ti alloys are widely used in restorative surgery because of their good biocompatibility, enhanced mechanical behavior and high corrosion resistance in physiological media. The corrosion resistance of Ti-based materials is due to the spontaneous formation of the TiO{sub 2} oxide film on their surface, which exhibits elevated stability in biological fluids. Ti–Nb alloys, depending on the composition and the processing routes to which the alloys are subjected, have high mechanical strength combined with low elastic modulus. The addition of Sn to Ti–Nb alloys allows the phase transformations to be controlled, particularly the precipitation of ω phase. The aim of this study is to discuss the microstructure, mechanical properties and corrosion behavior of cast Ti–Nb alloys to which Sn has been added. Samples were centrifugally cast in a copper mold, and the microstructure was characterized using optical microscopy, scanning electron microscopy and X-ray diffractometry. Mechanical behavior evaluation was performed using Berkovich nanoindentation, Vickers hardness and compression tests. The corrosion behavior was evaluated in Ringer's solution at room temperature using electrochemical techniques. The results obtained suggested that the physical, mechanical and chemical behaviors of the Ti–Nb–Sn alloys are directly dependent on the Sn content. - Graphical abstract: Effects of Sn addition to the Ti–30Nb alloy on the elastic modulus. - Highlights: • Sn addition causes reduction of the ω phase precipitation. • Minimum Vickers hardness and elastic modulus occurred for 6 wt.% Sn content. • Addition of 6 wt.% Sn resulted in maximum ductility and minimum compression strength. • All Ti–30Nb–XSn (X = 0, 2, 4, 6, 8 and 10%) alloys are passive in Ringer's solution. • Highest corrosion resistance was observed for 6 wt.% Sn content.

36 MATERIALS SCIENCE↗