Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “microscope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Note: A simple, convenient, and reliable method to prepare gold scanning tunneling microscope tips

A simple method to prepare gold tips for scanning tunneling microscopy has been introduced. In this method, electrochemical etching without a hazardous electrolyte was employed. The setup uses basic laboratory instrumentation to control the etching process. This avoids purchasing complicated, expensive, and dedicated equipment for tip preparation. A procedure to optimize the etching parameters by setting the current limit is described. Etched tips were checked with both optical and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Scanning tunneling microscopic analysis of Cu(In,Ga)Se{sub 2} epitaxial layers

Scanning tunneling microscopy (STM) measurements have been made on single-crystal epitaxial layers of CuInSe{sub 2} grown on GaAs substrates. Results were obtained for as-grown, air-exposed, and cleaned surfaces; in situ cleaved surfaces; surfaces sputtered and annealed in the STM system; and samples prepared by a light chemical etch. Conventional constant-current topographs, current-voltage curves, and current imaging tunneling spectroscopy (CITS) scans were obtained. Topographic images show that the surfaces appear rough on the atomic scale and often exhibit regular features consistent with a previously proposed surface ad-dimer reconstruction. CITS scans show a spatially varying energy gap consistent with band-edge fluctuations on a scale of a few atomic spacings. Energy variations were observed in both band edges. Although quantitative description of the magnitude of these fluctuations is difficult, the fluctuations on the atomic scale appear much larger than observed by methods such as photoluminescence, which average over larger volumes.

36 MATERIALS SCIENCE↗

A high-resolution field-emission-gun, scanning electron microscope investigation of anisotropic hydrogen decrepitation in Nd-Fe-B-based sintered magnets

In this investigation commercial magnets based on (Nd,Dy){sub 14}(Fe,Co){sub 79}B{sub 7} were prepared by a conventional powder-metallurgy route with a degree of alignment equal to {approx}90% and then exposed to hydrogen at a pressure of 1 bar. The magnets, in the form of cylinders, were observed to decrepitate exclusively from the ends. High-resolution electron microscopy was able to identify the presence of crack formation within the Nd{sub 2}Fe{sub 14}B grains, with the cracks running parallel to the c axis of these grains. Based on the concentration profile for hydrogen in a rare-earth transition-metal material, it is clear that the presence of hydrogen-induced cracks running perpendicular to the ends of the magnet provides for a much more rapidly progressing hydrogen front in this direction than from the sides of the magnet. This results in the magnet exhibiting a macroscopic tendency to decrepitate from the poles of the magnet toward the center. This combination of microstructural modification via particle alignment as part of the sintering process and direct observation via high-resolution electron microscopy has led to a satisfying explanation for the anisotropic hydrogen-decrepitation effect.

36 MATERIALS SCIENCE↗

Development of Parallel Image Detection System Using Annular Pupils for Scanning Transmission Electron Microscope

A parallel image detection system using an annular pupil for electron optics were developed to realize an increase in the depth of focus, aberration-free imaging and separation of amplitude and phase images under scanning transmission electron microscopy (STEM). Apertures for annular pupils able to suppress high-energy electron scattering were developed using a focused ion beam (FIB) technique. The annular apertures were designed with outer diameter of oe 40 {mu}m and inner diameter of oe32 {mu}m. A taper angle varying from 20 deg. to 1 deg. was applied to the slits of the annular apertures to suppress the influence of high-energy electron scattering. Each azimuth angle image on scintillator was detected by a multi-anode photomultiplier tube assembly through 40 optical fibers bundled in a ring shape. To focus the image appearing on the scintillator on optical fibers, an optical lens relay system attached with CCD camera was developed. The system enables the taking of 40 images simultaneously from different scattered directions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Local Magnetic Behavior of {sup 54}Fe In EuFe{sub 2}As{sub 2}: Microscopic Study By Perturbed Angular Distribution Spectroscopy

We report time differential perturbed angular distribution measurement of {sup 54}Fe on a polycrystalline EuFe{sub 2}As{sub 2} sample. The local susceptibility measured shows Curie-Weiss like temperature dependence in the paramagnetic region. The spin-lattice relaxation observed shows Korringa like relaxation and changes discontinuously at T{sub S} = T{sub N} = 190 K. Below T{sub N}, the hyperfine field shows two components. The low filed component of the hyperfine field shows a power law dependence of 0.27 on temperature.

36 MATERIALS SCIENCE↗

A microscopic model for noise induced transport: Heat-bath nonlinearly driven by external white noise

This work explores the observation that, even in the absence of a net externally applied bias, a symmetric homogeneous system coupled linearly to two heat baths is capable of producing unidirectional motion simply by nonlinearly driving one of the heat baths by an external Gaussian white noise. This is quite contrary to the traditional observation that, in order to obtain a net drift current, a state-dependent dissipation, which is a consequence of nonlinear system-bath coupling, is ubiquitous.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Microscopic derivation of IBM and structural evolution in nuclei

A Hamiltonian of the interacting boson model (IBM) is derived based on the mean-field calculations with nuclear energy density functionals (EDFs). The multi-nucleon dynamics of the surface deformation is simulated in terms of the boson degrees of freedom. The interaction strengths of the IBM Hamiltonian are determined by mapping the potential energy surfaces (PESs) of a given EDF with quadrupole degrees of freedom onto the corresponding PES of IBM. A fermion-to-boson mapping for a rotational nucleus is discussed in terms of the rotational response, which reflects a specific time-dependent feature. Ground-state correlation energy is evaluated as a signature of structural evolution. Some examples resulting from the present spectroscopic calculations are shown for neutron-rich Pt, Os and W isotopes including exotic ones.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prediction of atomic force microscope probe dynamics through the receptance coupling method

The increased growth in the use of tip-based sensing, manipulations, and fabrication of devices in atomic force microscopy (AFM) necessitates the accurate prediction of the dynamic behavior of the AFM probe. The chip holder, to which the micro-sensing device is attached, and the rest of the AFM system can affect the overall dynamics of the probe. In order to consider these boundary effects, we propose a novel receptance coupling method to mathematically combine the dynamics of the AFM setup and probe, based on the equilibrium and compatibility conditions at the joint. Once the frequency response functions of displacement over force at the tool tip are obtained, the dynamic interaction forces between the tip and the sample in nanoscale can be determined by measuring the probe tip displacement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Kelvin probe microscopic visualization of charge storage at polystyrene interfaces with pentacene and gold

Charge carriers trapped in polystyrene (PS) were investigated with Kelvin probe microscopy (KPM) and thermally stimulated discharge current (TSDC). Lateral heterojunctions of pentacene/PS were scanned using KPM, effectively observing polarization along a side view of a lateral nonvolatile organic field-effect transistor dielectric interface. TSDC was used to observe charge migration out of PS films and to estimate the trap energy level inside the PS, using the initial rise method.

Dawidczyk, T. J.↗

First-Principles Calculation of Thermodynamic Stability of Acids and Bases under pH Environment: A Microscopic pH Theory

Despite being one of the most important thermodynamic variables, pH has yet to be incorporated into first-principles thermodynamics to calculate stability of acidic and basic solutes in aqueous solutions. By treating the solutes as defects in homogeneous liquids, we formulate a first-principles approach to calculate their formation energies under proton chemical potential, or pH, based on explicit molecular dynamics. The method draws analogy to first-principle calculations of defect formation energies under electron chemical potential, or Fermi energy, in semiconductors. From this, we propose a simple pictorial representation of the general theory of acid-base chemistry. By performing first-principles molecular dynamics of liquid water models with solutes, we apply the formulation to calculate formation energies of various neutral and charged solutes such as H{sup +}, OH{sup -}, NH{sub 3}, NH{sub 4}{sup +}, HCOOH, and HCOO{sup -} in water. The deduced auto-dissociation constant of water and the difference in the pKa values of NH{sub 3} and HCOOH show good agreement with known experimental values. Our first-principles approach can be further extended and applied to other bio- and electro-chemical molecules such as amino acids and redox reaction couples that could exist in aqueous environments to understand their thermodynamic stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-Space Microscopic Electrical Imaging of n+-p Junction Beneath Front-Side Ag Contact of Multicrystalline Si Solar Cells

We investigated the quality of the n+-p diffused junction beneath the front-side Ag contact of multicrystalline Si solar cells by characterizing the uniformities of electrostatic potential and doping concentration across the junction using the atomic force microscopy-based electrical imaging techniques of scanning Kelvin probe force microscopy and scanning capacitance microscopy. We found that Ag screen-printing metallization fired at the over-fire temperature significantly degrades the junction uniformity beneath the Ag contact grid, whereas metallization at the optimal- and under-fire temperatures does not cause degradation. Ag crystallites with widely distributed sizes were found at the Ag-grid/emitter-Si interface of the over-fired cell, which is associated with the junction damage beneath the Ag grid. Large crystallites protrude into Si deeper than the junction depth. However, the junction was not broken down; instead, it was reformed on the entire front of the crystallite/Si interface. We propose a mechanism of junction-quality degradation, based on emitter Si melting at the temperature around the Ag-Si eutectic point during firing, and subsequent re-crystallization with incorporation of Ag and other impurities and with formation of crystallographic defects during quenching. The effect of this junction damage on solar cell performance is discussed.

14 SOLAR ENERGY↗

Microscopic investigation of structural evolution in even-even N = 60 isotones

The ground state properties of even-even N=60 isotones from the neutron-rich to the proton-rich side are investigated within the self-consistent Skyrme-Hartree-Fock-Bogoliubov theory in the triaxial landscape. Quantities such as binding energies and root-mean-square radii are investigated and compared with available experimental data. The evolution of the potential energy surfaces in the ({beta},{gamma}) deformation plane is presented and discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Spin-wave interference in microscopic permalloy tubes

We present permalloy coated needles which act as spin-wave resonators. The permalloy coated needles were investigated using microwave absorption spectroscopy. Thereby, we found up to three resonant modes which correspond to constructively interfering azimuthal spin waves. The resonant modes are well reproduced in calculations based on an analytical model for the spin-wave dispersion employing periodic boundary conditions. The dependence of the resonance frequencies on the needles' radii and the external magnetic field is demonstrated experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic and self-consistent description for neutron halo in deformed nuclei

A deformed relativistic Hartree-Bogoliubov theory in continuum has been developed for the study of neutron halos in deformed nuclei and the halo phenomenon in deformed weakly bound nuclei is investigated. Magnesium and neon isotopes are studied and some results are presented for the deformed neutron-rich and weakly bound nuclei {sup 44}Mg and {sup 36}Ne. The core of the former nucleus is prolate, but the halo has a slightly oblate shape. This indicates a decoupling of the halo orbitals from the deformation of the core. The generic conditions for the existence of halos in deformed nuclei and for the occurrence of this decoupling effect are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗