Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “initial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

Initial results on fault diagnosis of DSN antenna control assemblies using pattern recognition techniques

Initial results obtained from an investigation using pattern recognition techniques for identifying fault modes in the Deep Space Network (DSN) 70 m antenna control loops are described. The overall background to the problem is described, the motivation and potential benefits of this approach are outlined. In particular, an experiment is described in which fault modes were introduced into a state-space simulation of the antenna control loops. By training a multilayer feed-forward neural network on the simulated sensor output, classification rates of over 95 percent were achieved with a false alarm rate of zero on unseen tests data. It concludes that although the neural classifier has certain practical limitations at present, it also has considerable potential for problems of this nature.

Smyth, P.↗

Initial experimentation on the nonvented fill of a 0.14m3 (5 ft. 3) dewar with nitrogen and hydrogen

A series of nonvented fills were performed on a 0.14 cu m (5 cu ft) stainless steel dewar. Fills were conducted with a 120 deg cone angle spray nozzle over a range of inflow and initial wall temperatures with both liquid nitrogen and liquid hydrogen. Fill levels in excess of 85 percent liquid were achieved for four out of four nitrogen and two out of five hydrogen tests. Previously developed analytical models were compared to the test results and shown to have general trend agreement.

Chato, David J.↗

A technology assessment of alternative communications systems for the space exploration initiative

Telecommunications, Navigation, and Information Management (TNIM) services are vital to accomplish the ambitious goals of the Space Exploration Initiative (SEI). A technology assessment is provided for four alternative lunar and Mars operational TNIM systems based on detailed communications link analyses. The four alternative systems range from a minimum to a fully enhanced capability and use frequencies from S-band, through Ka-band, and up to optical wavelengths. Included are technology development schedules as they relate to present SEI mission architecture time frames.

Ponchak, Denise S.↗

Intensive MHD-structures penetration in the middle atmosphere initiated in the ionospheric cusp under quiet geomagnetic conditions

In connection with the recently detected quasiperiodical magnetic disturbances in the ionospheric cusp, the penetration of compressional surface magnetohydrodynamic (MHD) waves through the middle atmosphere is modelled numerically. For the COSPAR International Reference Atmosphere (CIRA) 72 model the respective energy density flux of the disturbances in the middle atmosphere is determined. On the basis of the developed model certain conclusions are reached about the height distribution of the structures (energy losses, currents, etc.) initiated by intensive magnetic cusp disturbances.

Mateev, L. N.↗

The Initial Blood Storage Experiment - The spaceflight hardware program

The Initial Blood Storage Experiment (IBSE) was conceived to investigate the effects of microgravity on the formed elements of human blood. The experiment flew on the January 1986, 61-C mission of the Space Shuttle Columbia. The experiment hardware was designed to provide a closely controlled temperature and air flow environment for all blood samples. During the mission, two IBSE modules were on board the orbiter and an identical set of hardware and blood samples were maintained on earth as a control. This paper describes the development and performance of the IBSE hardware which was converted from a conceptual design to an on-orbit, man-rated, mid-deck locker experiment in 17 months.

Almgren, David W.↗

Derivatives of buckling loads and vibration frequencies with respect to stiffness and initial strain parameters

A uniform variational approach to sensitivity analysis of vibration frequencies and bifurcation loads of nonlinear structures is developed. Two methods of calculating the sensitivities of bifurcation buckling loads and vibration frequencies of nonlinear structures, with respect to stiffness and initial strain parameters, are presented. A direct method requires calculation of derivatives of the prebuckling state with respect to these parameters. An adjoint method bypasses the need for these derivatives by using instead the strain field associated with the second-order postbuckling state. An operator notation is used and the derivation is based on the principle of virtual work. The derivative computations are easily implemented in structural analysis programs. This is demonstrated by examples using a general purpose, finite element program and a shell-of-revolution program.

Haftka, Raphael T.↗

Vibrations of rectangular plates with moderately large initial deflections at elevated temperatures using finite element method

A finite-element formulation is developed for the free vibration of rectangular plates which are under the influence of moderately large stress-free initial deflections and large thermal deflections. The von Karman nonlinear strain-displacement relations are used to account for the thermal deflections. The plates are thin, isotropic, and Hookean in nature. The temperature imposed on the plate is assumed to be constant through the thickness of the plate. Uniform and sinusoidal temperature distributions are studied. The material properties of the plates are temperature-dependent due to the relatively high temperatures imposed on the plates.

Gray, C. C.↗

Initial characterization of a modular heat exchanger with an integral heat pipe

As part of the Civil Space Technology Initiative (CSTI) Advanced Technology program, a conceptual design of the Stirling space engibe (SSE) was generated to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space missions. The free-piston Stirling engine (FPSE) was chosen as the growth option in the CSTI program. An existing FPSE was modified as a test bed for a modular heat exchanger evaluation. Evaluation of the individual heat pipes before installation in the engine is described.

Schreiber, Jeffrey G.↗

The formation and initial evolution of protostellar disks

The formation and evolution of an accretion disk formed during the collapse of a rotating cloud core are considered. The effect of the usual 'turbulent' alpha-viscosity as well as the effective viscosity due to self-gravitation in the disk are taken into account. For observed values of the cloud's initial rotation rates, and for reasonable estimates of the efficiency of the various processes, it is found that the disks so formed are large (radii several hundred to a few thousand AU), relatively massive (comparable in mass to the central star), and long-lived (tens of infall time scales).

Lin, Douglas N. C.↗

The ROTONET prediction system and initial comparisons with far-field acoustics measurements for the XV-15 tilt-rotor aircraft

The NASA Langley Research Center is developing the ROTONET prediction system, a comprehensive computer program for the prediction of full system rotorcraft noise, to provide an analytical tool for estimating the total noise signature of rotorcraft. It contains models of many rotorcraft noise generating mechanisms. NASA is also performing a series of flight tests to provide comprehensive validation data bases for the ROTONET System. A joint NASA/Bell Helicopter Textron Incorporated test of an XV-15 tilt-rotor aircraft is one of several flight test which has been performed. A data base consisting of spectra, noise level time histories, and effective perceived noise levels, incorporating actual meteorological conditions, and tilt-order aircraft flight dynamics, is being produced from this test. The ROTONET prediction system is described, the flight test methodology is explained, and initial comparisons are shown of ROTONET predictions with data from the flight test. EPNL, noise level time history, and narrowband noise spectra comparisons demonstrate the overall capabilities of the prediction system.

Golub, Robert A.↗

Engine selection for the Space Exploration Initiative

The process used by NASA in the selection of the engine for the Space Exploration Initiative mission is described. The major propulsion requirements of the engine are addressed along with the engine options and key drivers and trades. Special attention is given to the requirements of the propellant feed system and the reaction control system. As a result of the 90-study, four moderate chamber pressure expander-cycle oxygen/hydrogen engines with a thrust level of 20,000 lbf each were selected for the lunar transfer vehicle. The paper also presents results of architecture studies and of advanced engine test bed studies.

Jones, Lee W.↗

Initial results in the development of a synthetic aperture microwave radiometer

A radiometer that measures the complex correlation of the voltage from pairs of antennas at many different baselines is being developed. Each baseline produces a sample point in the Fourier transform of the scene, and a map of the scene is obtained after all measurements have been made by inverting the transform. A substantial reduction in the antenna collecting area required compared to a conventional imaging radiometer can be obtained in this manner. An aircraft prototype being developed is a hybrid which uses real aperture antennas to obtain resolution along-track (stick antennas) and uses aperture synthesis to obtain resolution across-track. The prototype was flight-tested aboard the NASA P-3 in June 1988. During this flight a map was made of the Delmarva Peninsula south of NASA's Wallops Flight Facility. This initial map shows the major land/water features and compares very favorably with a Landsat image of the area, suggesting a bright outlook for the development of this technique in the future.

Le Vine, David M.↗

NASA's initial flight missions in the Small Explorer Program

A new component of NASA's Explorer Program has been initiated in order to provide research opportunities characterized by small, quick-turn-around, and frequent space missions. Objectives include the launching of one or two payloads per year, depending on mission cost and availability of funds and launch vehicles. The four missions chosen from the proposals solicited by the Small Explorer Announcement Opportunity are discussed in detail. These include the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) designed to carry out energetic particle studies of outstanding questions in the fields of space plasma, solar, heliospheric, cosmic ray, and middle atmospheric physics; the Submillimeter Wave Astronomy Satellite (SWAS), which will conduct both pointed and survey observations of dense galactic molecular clouds; the Fast Auroral Snapshot Explorer (FAST); and the Total Ozone Mapping Spectrometer (TOMS).

Rasch, Nickolus O.↗

Initial experimentation on the nonvented fill of a 0.14 cu m (5 cu ft) dewar with nitrogen and hydrogen

A series of nonvented fills were performed on a 0.14 cu m (5 cu ft) stainless steel dewar. Fills were conducted with a 120 deg cone angle spray nozzle over a range of inflow and initial wall temperatures with both liquid nitrogen and liquid hydrogen. Fill levels in excess of 85 percent liquid were achieved for four out of four nitrogen and two out of five hydrogen tests. Previously developed analytical models were compared to the test results and shown to have general trend agreement.

Chato, David J.↗

Summary and recommendations for initial exercise prescription

The recommendations summarized herein constitute a basis on which an initial exercise prescription can be formulated. It is noteworthy that any exercise program designed currently would be an approximation. Examination of the existing space-flight data reveals a scarcity of in-flight data on which to rigorously design an exercise program. The relevant experience within the U.S. space program (with regard to long-duration space flight) is limited to the Skylab Program. Lessons learned from Skylab are relevant to the design of a Space Station exercise program, especially with regard to the total length of exercise time required, cardiovascular (CV) deconditioning/reconditioning, and bone loss. Certain observations of the U.S.S.R. exercise activities can also contribute to the formulation of an exercise prescription of Space Station. Reportedly, the U.S.S.R. uses both a bicycle ergometer and a treadmill device on long-duration missions with some degree of success. Using the third crew of Salyut 6, which was a 175-day stay, as a representative mission, the typical time dedicated to exercise varies from 2 to 3 hours per day. In addition, the cosmonauts wear an elasticized suit, called a penquin suit, for time periods ranging from 12 to 16 hours per day. This device provides a load across the axial skeleton against which the wearer must exert himself. Despite these extensive countermeasures, the effects of adaptation are not totally prevented.

Stewart, Donald F.↗

Plasma puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for the azimuthally uniform surface flashover which initiates plasma-puff under wide range of fill gas pressure of Ar, He and N2. The optimal fill gas pressure for the azimuthally uniform plasma-puff was about 120 mTorr and 450 Torr for He and N2, and between 120 mTorr and 5 Torr for Ar. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with the hypocycloidal pinch plasma-puff triggering. The main discharge of inverse pinch switch with plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr.

Venable, D. D.↗

Gas dynamics, accretion, and evolution of Algols: Initial results for three representative systems

IUE (International Ultraviolet Explorer) observations were made around the orbits of three Algol-type binaries: R Arae, U Cephei and Algol. These stars were selected to represent, respectively, the rapid, moderate and slow phases of mass transfer and mass loss in Algols. The data was obtained to derive maps of gas flow and mass loss, to study accretion processes and kinetic heating, and to investigate the importance of magnetic fields in these systems. Continuous observations were made from GSFC and VILSPA over 4 1/3 consecutive days during 10 to 14 Sep. 1989. A total of 100 spectra are obtained. This is the first time that Algol systems are observed continuously over their orbits with IUE. Initial results from this program are discussed.

Gimenez, A.↗

Initial studies of array feeds for the 70-meter antenna at 32 GHz

The results of a study to determine the feasibility of using array feed techniques to improve the performance of the 70 m antenna at 32 GHz are presented. Changing from 8.4 to 32 GHz has the potential of increasing the gain by 11.6 dB, but recent measurements indicate that additional losses of from 3 to 7 dB occur at 32 GHz, depending on the elevation angle. Array feeds were proposed to recover some of the losses by compensating for surface distortions that contribute to these losses. Results for both surface distortion compensation and pointing error correction are discussed. These initial studies, however, had one significant restriction: The mechanical finite element model was used to characterize the surface distortions, not the measured distortions from three angle holography data, which would be more representative of the actual antenna. Further work is required to provide for a more accurate estimate of performance that utilizes holography data and, in particular, one that evaluates the performance in the focal plane region of the antenna.

Cramer, P. W.↗