Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84

A THEORETICAL STUDY OF THE BUILD-UP OF THE SUN’S POLAR MAGNETIC FIELD BY USING A 3D KINEMATIC DYNAMO MODEL

We develop a three-dimensional kinematic self-sustaining model of the solar dynamo in which the poloidal field generation is from tilted bipolar sunspot pairs placed on the solar surface above regions of strong toroidal field by using the SpotMaker algorithm, and then the transport of this poloidal field to the tachocline is primarily caused by turbulent diffusion. We obtain a dipolar solution within a certain range of parameters. We use this model to study the build-up of the polar magnetic field and show that some insights obtained from surface flux transport models have to be revised. We present results obtained by putting a single bipolar sunspot pair in a hemisphere and two symmetrical sunspot pairs in two hemispheres. We find that the polar fields produced by them disappear due to the upward advection of poloidal flux at low latitudes, which emerges as oppositely signed radial flux and which is then advected poleward by the meridional flow. We also study the effect that a large sunspot pair, violating Hale’s polarity law, would have on the polar field. We find that there would be some effect—especially if the anti-Hale pair appears at high latitudes in the mid-phase of the cycle—though the effect is not very dramatic.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiation GRMHD Models of Accretion onto Stellar-mass Black Holes. II. Super-Eddington Accretion

We present a comprehensive analysis of super-Eddington black hole accretion simulations that solve the GRMHD equations coupled with angle-discretized radiation transport. The simulations span a range of accretion rates, two black hole spins, and two magnetic field topologies, and include resolution studies as well as comparisons with nonradiative models. Super-Eddington accretion flows consistently develop geometrically thick disks supported by radiation pressure, regardless of magnetic field configuration. Radiation generated in the inner disk drives substantial outflows, forming conical funnel regions that limit photon escape and result in very low radiation efficiency. The accretion flows are highly turbulent, with thermal energy transport dominated by radiation advection rather than diffusion. Angular momentum is primarily carried outward by Maxwell stress, with turbulent Reynolds stress playing a subdominant role. Both strong and weak jets are produced. Strong jets arise from sufficient net vertical magnetic flux and rapid black hole spin, and they can effectively evacuate the funnel, enabling radiation to escape through strong geometric beaming. In contrast, weak jets fail to clear the funnel, which becomes obscured by radiation-driven outflows and leads to distinct observational signatures. Spiral structures are observed in the plunging region, behaving like density waves. These super-Eddington models are applicable to a variety of astronomical systems, including ultraluminous X-ray sources, little red dots, and black hole transients.

79 ASTRONOMY AND ASTROPHYSICS↗

Review of fuel/cladding eutectic formation in metallic SFR fuel pins

Sodium-cooled Fast Reactors (SFRs) remain a strong contender amongst the Generation IV reactor concepts. Metallic fuel has been a primary fuel option for SFR designers in the US and was used extensively in the first generation of SFRs. One of the benefits of metallic fuel is its chemical compatibility with the coolant; unfortunately this compatibility does not extend to steel cladding at elevated temperatures. It has been known that uranium, plutonium, and rare earths diffuse with cladding constituents to form a low melting point fuel/cladding eutectic which acts to thin the cladding once the interfacial temperature rises above the system liquidus temperature. Since the 1960's, many experiments have been performed and published to evaluate the rate of fuel/cladding eutectic formation and the temperature above which melting will begin as a function of fuel/cladding interfacial temperature, time at temperature, fuel constituents (uranium, fissium or uranium (plutonium) zirconium), cladding type (stainless steel 316, stainless steel 306, D9 or HT9), beginning of life linear power, plutonium enrichment and burnup. The results of these tests, however, remain scattered across conference and journal papers spanning 50 years. The tests used to collect this data also varied in experimental procedure throughout the years. This paper will consolidate the experimental data into four groups of similar test conditions and expand upon the testing performed for each group in detail. A companion paper in PSA 2011 will discuss predictive correlations formulated from this database. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nuclear Material Monitoring in Molten Salt Systems using Cyclic Voltammetry

As designs for the next generation of nuclear power plants and reprocessing facilities develop, molten salt based systems are receiving increasing attention as fuel containment, cooling and reprocessing media. Traditionally, aqueous systems for power production and fuel reprocessing are associated with well-developed methods for the monitoring and accountancy of nuclear material. Many of these techniques are proving insufficient in providing the same information in molten salt systems. The International Atomic Energy Agency (IAEA) has called for the continued evaluation of advanced measurement techniques in systems such as molten salt as part of the Generation IV International Forum (GIF) and International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO). Cyclic voltammetry (CV) is an electrochemical technique that offers promising applications in molten salt systems for the in situ monitoring of nuclear material. A technique such as CV offers a method for monitoring nuclear material in a system relying on molten salt for power production, cooling or reprocessing. Cyclic voltammetry has been shown to provide information regarding the diffusion of electroactive species in molten salt. Once a diffusion coefficient data base is assembled, CV can be performed on molten salt systems to determine concentrations of species in situ.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Studies on the growth and physical properties of nonlinear optical crystal: 2-Amino-5-nitropyridinium-toluenesulfonate

Graphical abstract: 2-Amino-5-nitropyridinium-toluenesulfonate is identified as potential candidate for efficient frequency conversion. Research highlights: {yields} Single crystals of 2A5NPT have been grown from saturated solution. {yields} Powder test with Nd:YAG laser radiation shows a high second harmonic generation. {yields} Single shot and multiple shot surface laser damage thresholds are determined. {yields} The thermal parameters of 2A5NPT were measured by an improved photopyroelectric technique. {yields} The high value of damage threshold is related to the specific heat of the crystal which is reasonably high. -- Abstract: Single crystals of 2-amino-5-nitropyridinium-toluenesulfonate (2A5NPT) were grown by the slow cooling method. The unit cell dimensions were determined from single crystal X-ray diffraction studies. The thermal parameters - thermal diffusivity ({alpha}), thermal effusivity (e), thermal conductivity (K) and heat capacity (C{sub p}) of 2A5NPT were measured by an improved photopyroelectric technique at room temperature. Single and multiple shot experiments performed on the grown crystals for the second harmonic of pulsed Nd:YAG laser (532 nm) show that it exhibits a high laser damage threshold which is a favorable property for nonlinear optical applications. Dielectric constant and dielectric loss of the grown crystal were evaluated for the frequency range 1 kHz-1 MHz in the temperature region 40-130 {sup o}C. Hardness values were measured using Vickers hardness measurement.

36 MATERIALS SCIENCE↗

Deterministic Modeling of the High Temperature Test Reactor

Idaho National Laboratory (INL) is tasked with the development of reactor physics analysis capability of the Next Generation Nuclear Power (NGNP) project. In order to examine INL’s current prismatic reactor deterministic analysis tools, the project is conducting a benchmark exercise based on modeling the High Temperature Test Reactor (HTTR). This exercise entails the development of a model for the initial criticality, a 19 column thin annular core, and the fully loaded core critical condition with 30 columns. Special emphasis is devoted to the annular core modeling, which shares more characteristics with the NGNP base design. The DRAGON code is used in this study because it offers significant ease and versatility in modeling prismatic designs. Despite some geometric limitations, the code performs quite well compared to other lattice physics codes. DRAGON can generate transport solutions via collision probability (CP), method of characteristics (MOC), and discrete ordinates (Sn). A fine group cross section library based on the SHEM 281 energy structure is used in the DRAGON calculations. HEXPEDITE is the hexagonal z full core solver used in this study and is based on the Green’s Function solution of the transverse integrated equations. In addition, two Monte Carlo (MC) based codes, MCNP5 and PSG2/SERPENT, provide benchmarking capability for the DRAGON and the nodal diffusion solver codes. The results from this study show a consistent bias of 2–3% for the core multiplication factor. This systematic error has also been observed in other HTTR benchmark efforts and is well documented in the literature. The ENDF/B VII graphite and U235 cross sections appear to be the main source of the error. The isothermal temperature coefficients calculated with the fully loaded core configuration agree well with other benchmark participants but are 40% higher than the experimental values. This discrepancy with the measurement stems from the fact that during the experiments the control rods were adjusted to maintain criticality, whereas in the model, the rod positions were fixed. In addition, this work includes a brief study of a cross section generation approach that seeks to decouple the domain in order to account for neighbor effects. This spectral interpenetration is a dominant effect in annular HTR physics. This analysis methodology should be further explored in order to reduce the error that is systematically propagated in the traditional generation of cross sections.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Delayed plastic relaxation limit in SiGe islands grown by Ge diffusion from a local source

The hetero-epitaxial strain relaxation in nano-scale systems plays a fundamental role in shaping their properties. Here, the elastic and plastic relaxation of self-assembled SiGe islands grown by surface-thermal-diffusion from a local Ge solid source on Si(100) are studied by atomic force and transmission electron microscopies, enabling the simultaneous investigation of the strain relaxation in different dynamical regimes. Islands grown by this technique remain dislocation-free and preserve a structural coherence with the substrate for a base width as large as 350 nm. The results indicate that a delay of the plastic relaxation is promoted by an enhanced Si-Ge intermixing, induced by the surface-thermal-diffusion, which takes place already in the SiGe overlayer before the formation of a critical nucleus. The local entropy of mixing dominates, leading the system toward a thermodynamic equilibrium, where non-dislocated, shallow islands with a low residual stress are energetically stable. These findings elucidate the role of the interface dynamics in modulating the lattice distortion at the nano-scale, and highlight the potential use of our growth strategy to create composition and strain-controlled nano-structures for new-generation devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PRE-SUPERNOVA EVOLUTION OF ROTATING SOLAR METALLICITY STARS IN THE MASS RANGE 13-120 M {sub Sun} AND THEIR EXPLOSIVE YIELDS

We present the first set of a new generation of models of massive stars with a solar composition extending between 13 and 120 M {sub Sun }, computed with and without the effects of rotation. We included two instabilities induced by rotation: the meridional circulation and the shear instability. We implemented two alternative schemes to treat the transport of the angular momentum: the advection-diffusion formalism and the simpler purely diffusive one. The full evolution from the pre-main sequence up to the pre-supernova stage is followed in detail with a very extended nuclear network. The explosive yields are provided for a variety of possible mass cuts and are available at the Web site http://www.iasf-roma.inaf.it/orfeo/public{sub h}tml. We find that both the He and the CO core masses are larger than those of their non-rotating counterparts. Also the C abundance left by the He burning is lower than in the non-rotating case, especially for stars with an initial mass of 13-25 M {sub Sun }, and this affects the final mass-radius relation, basically the final binding energy, at the pre-supernova stage. The elemental yields produced by a generation of stars rotating initially at 300 km s{sup -1} do not change substantially with respect to those produced by a generation of non-rotating massive stars, the main differences being a slight overproduction of the weak s-component and a larger production of F. Since rotation also affects the mass-loss rate, either directly or indirectly, we find substantial differences in the lifetimes as O-type and Wolf-Rayet subtypes between the rotating and non-rotating models. The maximum mass exploding as Type IIP supernova ranges between 15 and 20 M {sub Sun} in both sets of models (this value depends basically on the larger mass-loss rates in the red supergiant phase due to the inclusion of the dust-driven wind). This limiting value is in remarkably good agreement with current estimates.

79 ASTRONOMY AND ASTROPHYSICS↗

A powerful double radio relic system discovered in PSZ1 G108.18-11.53: evidence for a shock with non-uniform Mach number?

Diffuse radio emission in the form of radio haloes and relics has been found in a number of merging galaxy clusters. These structures indicate that shock and turbulence associated with the merger accelerate electrons to relativistic energies. We report the discovery of a radio relic + radio halo system in PSZ1 G108.18-11.53 (z = 0.335). This cluster hosts the second most powerful double radio relic system ever discovered. We observed PSZ1 G108.18-11.53 with the Giant Meterwave Radio Telescope and the Westerbork Synthesis Radio Telescope. We obtained radio maps at 147, 323, 607 and 1380 MHz. We also observed the cluster with the Keck telescope, obtaining the spectroscopic redshift for 42 cluster members. From the injection index, we obtained the Mach number of the shocks generating the two radio relics. For the southern shock, we found $M$ = 2.33 $+0.19\atop{-0.26}$ while the northern shock Mach number goes from $M$2.20 $+0.07\atop{-0.14}$ in the north part down to $M$ = 200 $+0.03\atop{-0.08}$ in the southern region. Finally, if the relation between the injection index and the Mach number predicted by diffusive shock acceleration theory holds, this is the first observational evidence for a gradient in the Mach number along a galaxy cluster merger shock.

79 ASTRONOMY AND ASTROPHYSICS↗

Enhanced photocatalytic activity of (Zn, N)-codoped TiO{sub 2} nanoparticles

Highlights: ► (Zn, N)-codoped TiO{sub 2} nanoparticles were prepared by the sol–gel method. ► The photocatalytic activity in TiO{sub 2} was enhanced due to the synergistic action of N and Zn doping. ► The photo-generated charge carrier transfer in the photocatalysts was studied by the PL spectra. ► The oxygen vacancy played multiple roles in the photocatalysts. -- Abstract: (Zn, N)-codoped TiO{sub 2} nanoparticles were prepared by the sol–gel method. X-ray diffraction (XRD) results testified that anatase samples were obtained. Transmission electron microscopy (TEM) patterns revealed that the average grain size of all the samples is about 15 nm and the Zn doping caused obvious particle aggregation. The Brunauer–Emmett–Teller (BET) surface areas of the samples were measured to testify the aggregation. The Zn doping caused slight blue-shift of absorption edge by the ultraviolet–visible diffuse reflectance spectroscopy (UV–vis DRS) measurements. The photocatalytic activity for the degradation of methylene blue (MB) solution was best enhanced in the (Zn, N)-codoped TiO{sub 2} with 1 at.% Zn doping level. Photoluminescence (PL) emission spectra of the samples were also investigated, which revealed that the oxygen vacancy and isolated N 2p states played important roles in the photo-generated charge carrier recombination in the (Zn, N)-codoped TiO{sub 2}. It was suggested that the doping induced oxygen vacancies could promote the photocatalytic oxidation processes.

36 MATERIALS SCIENCE↗

Conceptual design and optimization for a low-power ADS with a 70 MeV, 0.75 mA proton beam

In the framework of research on Generation IV reactors, it is very important to have infrastructures specifically dedicated to the study of fundamental kinetic and dynamic parameters of future fast-neutron reactors, a capability not provided by many presently available or planned zero-power prototypes. We propose the conceptual design of an ADS with high safety standards, in order to be used as a training facility, but also a good flexibility so as to allow for a wide range of static an dynamic measurements and experiments. A high safety standard is guaranteed by limiting the system power to less than 500 kW and the neutron multiplication coefficient k{sub eff} to less than 0.95 (a limiting value for waste storage areas), by using pure Uranium fuel (no Plutonium) and by using solid Lead as a diffuser. Lead has been chosen by considering this prototype to be a useful step towards the design of future Lead Fast Reactors, as well as because it allows a harder neutron spectrum, which facilitates tests on actinides fission, and provides meaningful data on the physics of this metal, which is one of the proposed coolants for future Generation IV reactors. The system is intrinsically subcritical and it needs an external neutron source to be sustained. Specific goal of the present work is to optimize design features of the core in such a way to meet previously declared requirements with the use of a commercially available accelerator in order to reduce costs and increase reliability. The conceptual design requires, in the 'full configuration', 60 active elements, each made by a solid Lead matrix of dimensions 92 x 92 x 1200 mm{sup 3}, each containing 81 Uranium oxide fuel rods, enriched 20% w/o in {sup 235}U. Protons, coming from a continuous cyclotron of 70 MeV in energy and 0.75 mA in beam current, are converted into neutrons by a Beryllium target. Cooling is provided by Helium gas, transparent to neutron and not subject to activation. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

On the Issue of the {zeta} series convergence and loop corrections in the generation of observable primordial non-Gaussianity in slow-roll inflation. II. The trispectrum

We calculate the trispectrum T{sub {zeta}}of the primordial curvature perturbation {zeta}, generated during a slow-roll inflationary epoch by considering a two-field quadratic model of inflation with canonical kinetic terms. We consider loop contributions as well as tree-level terms, and show that it is possible to attain very high, including observable, values for the level of non-Gaussianity {tau}{sub NL} if T{sub {zeta}}is dominated by the one-loop contribution. Special attention is paid to the claim in J. Cosmol. Astropart. Phys. 02 (2009) 017 that, in the model studied in this paper and for the specific inflationary trajectory we choose, the quantum fluctuations of the fields overwhelm the classical evolution. We argue that such a claim actually does not apply to our model, although more research is needed in order to understand the role of quantum diffusion. We also consider the probability that an observer in an ensemble of realizations of the density field sees a non-Gaussian distribution. In that respect, we show that the probability associated to the chosen inflationary trajectory is non-negligible. Finally, the levels of non-Gaussianity f{sub NL} and {tau}{sub NL} in the bispectrum B{sub {zeta}}and trispectrum T{sub {zeta}}of {zeta}, respectively, are also studied for the case in which {zeta} is not generated during inflation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of titania wrapped cadmium sulfide nanorods for photocatalytic hydrogen generation

Highlights: • TiO{sub 2}@CdS nanorods with core/shell morphology prepared by simple hydrothermal method. • TiO{sub 2} shell thickness optimized for enhanced photocatalytic activity. • Initial concentration of sacrificial agent and solution pH were optimized for H{sub 2} generation. • Optimized photocatalyst C{sub 3}T{sub 3} displayed stable and continuous H{sub 2} evolution for 20 h. • Optimised catalyst showed 12-folds efficient H{sub 2} production under UV–vis vs visible light. - Abstract: Herein we report a simplified synthetic approach for a semiconductor photocatalyst (CdS) wrapped with a nanoscale thin-layer of semiconducting material (TiO{sub 2}) to overcome the instability issues, besides the improved catalytic efficiency. Images of HR-TEM and elemental mapping evidenced the presence of CdS that covered by ultra thin-layer of TiO{sub 2} as shell. The UV–vis diffuse reflectance spectra showed red-shift in absorption edge in visible region. The photocatalytic water splitting towards hydrogen production using Na{sub 2}S/Na{sub 2}SO{sub 4} as sacrificial agent was evaluated under UV–vis and visible light irradiation. The essential variables such as thickness of TiO{sub 2} shell, amount of sacrificial agent and solution pH were fine tuned to achieve hydrogen generation of 5791 mL h{sup −1} g{sup −1} of catalyst. The higher efficiency is ascribed to core/shell morphology of CdS/TiO{sub 2} system that channelled the excitons to the surface for the red-ox reactions rather than recombination. The catalytic stability result ascertained that the photo-corrosion is greatly suppressed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spatial dependence of the growth of polycyclic aromatic compounds in an ethylene counterflow flame

The complex environments that characterize combustion systems can influence the distribution of gas-phase species, the relative importance of various growth mechanisms and the chemical and physical characteristics of the soot precursors generated. In order to provide molecular insights on the effect of combustion environments on the formation of gas-phase species, in this paper, we study the temporal and spatial dependence of soot precursors growth mechanisms in an ethylene/oxygen/argon counterflow diffusion flame. As computational tools of investigation, we included fluid dynamics simulations and stochastic discrete modeling. Results show the relative importance of various reaction pathways in flame, with the hydrogen-abstraction-acetylene-addition mechanism contributing to the formation of pure hydrocarbons near the stagnation plane, and oxygen chemistry prevailing near the maximum temperature region, where the concentration of atomic oxygen reaches its peak and phenols, ethers and furan-embedded species are formed. The computational results show excellent agreement with measurements obtained using aerosol mass spectrometry coupled with vacuum-ultraviolet photoionization. Knowledge acquired in this study can be used to predict the type of compounds formed in various locations of the flame and eventually provide insights on the environmental parameters that influence the growth of soot precursors. In addition, the results reported in this paper highlight the importance of modeling counterflow flames in two or three dimensions to capture the spatial dependence of growth mechanisms of soot precursors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrafast transient absorption measurements of photocarrier dynamics in PdSe 2

We investigate the photocarrier dynamics in bulk PdSe 2 , a layered transition metal dichalcogenide with a novel pentagonal structure and unique electronic and optical properties. Using femtosecond transient absorption microscopy, we study the behavior of photocarriers in mechanically exfoliated bulk PdSe 2 flakes at room temperature. By employing a 400 nm ultrafast laser pulse, electron–hole pairs are generated, and their dynamics are probed using an 800 nm detection pulse. Our findings reveal that the lifetime of photocarriers in bulk PdSe 2 is approximately 210 ps. Furthermore, by spatially resolving the differential reflection signal, we determine a photocarrier diffusion coefficient of about 7.3 cm 2 s –1 . Based on these results, we estimate a diffusion length of around 400 nm and a photocarrier mobility of approximately 300 cm 2 V –1 s –1 . Furthermore, these results shed light on the ultrafast optoelectronic properties of PdSe 2 , offer valuable insights into photocarriers in this emerging material, and enable design of high-performance optoelectronic devices based on PdSe 2 .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Au-Cu{sub 2}O core-shell nanowire photovoltaics

Semiconductor nanowires are among the most promising candidates for next generation photovoltaics. This is due to their outstanding optical and electrical properties which provide large optical cross sections while simultaneously decoupling the photon absorption and charge carrier extraction length scales. These effects relax the requirements for both the minority carrier diffusion length and the amount of semiconductor needed. Metal-semiconductor core-shell nanowires have previously been predicted to show even better optical absorption than solid semiconductor nanowires and offer the additional advantage of a local metal core contact. Here, we fabricate and analyze such a geometry using a single Au-Cu{sub 2}O core-shell nanowire photovoltaic cell as a model system. Spatially resolved photocurrent maps reveal that although the minority carrier diffusion length in the Cu{sub 2}O shell is less than 1 μm, the radial contact geometry with the incorporated metal electrode still allows for photogenerated carrier collection along an entire nanowire. Current-voltage measurements yield an open-circuit voltage of 600 mV under laser illumination and a dark diode turn-on voltage of 1 V. This study suggests the metal-semiconductor core-shell nanowire concept could be extended to low-cost, large-scale photovoltaic devices, utilizing for example, metal nanowire electrode grids coated with epitaxially grown semiconductor shells.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density functional theory study of the influence of segregation of S or Fe impurities on electromigration in nano-grained copper interconnects

The reliability of the circuits in the modern microelectronic devices remains, during last decades, one of the key topics in research and gains an attention for improving the promising candidates for conductors. Improvement of materials for such applications can be obtained by both electronic and compositional optimization. Ab initio calculations using full potential linearized augmented plane wave method in density functional theory are applied to explain the reduction in electromigration effect in the vicinity of grain boundaries (GB) in nano-structured Cu due to the segregation of some additives to the GB. Several possible mechanisms are considered. It is demonstrated that S atoms segregated to GB of nano-structured Cu lead to the growth of effective mass of the electrons. This decreases the mobility of electrons in external electric field, and, correspondingly, the momentum that they may transfer to atoms in collisions. Fe atoms segregated to GB of Cu create new empty states at the top of the valance band. These non-occupied states may stimulate the current of holes when external electric field is applied to the system, creating the “hole wind” in the direction opposite to the current of electrons. Such “hole wind” will compensate the forces generated by the electron current and therefore will reduce the total momentum transfer between charge carriers and atoms. The calculated electron density maps show that S and Fe segregating to Cu GB increases the strength of covalent bonds reducing the diffusion of Cu atoms in the vicinity of GB.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

STRONG NEW CONSTRAINTS ON THE EXTRAGALACTIC BACKGROUND LIGHT IN THE NEAR- TO MID-INFRARED

Direct measurements of the extragalactic background light (EBL) in the near-IR to mid-IR waveband are extremely difficult due to an overwhelming foreground from the zodiacal light that outshines the faint cosmological diffuse radiation field by more than an order of magnitude. Indirect constraints on the EBL are provided by {gamma}-ray observations of active galactic nuclei. Using the combination of the Fermi Gamma-Ray Space Telescope together with the current generation of ground-based air Cherenkov telescopes (H.E.S.S., MAGIC, and VERITAS) provides unprecedented sensitivity and spectral coverage for constraining the EBL in the near- to mid-IR. In this paper, we present new limits on the EBL based on the analysis of the broadband spectra of a select set of {gamma}-ray blazars covering 200 MeV to several TeV. The EBL intensity at 15 {mu}m is constrained to be 1.36 {+-} 0.58 nW m{sup -2} sr{sup -1}. We find that the fast evolution and baseline EBL models of Stecker et al., as well as the model of Kneiske et al., predict significantly higher EBL intensities in the mid-IR (15 {mu}m) than is allowed by the constraints derived here. In addition, the model of Franceschini et al. and the fiducial model of DomInguez et al. predict near- to mid-IR ratios smaller than that derived from our analysis. Namely, their intensities in the near-IR are too low while their intensities in the mid-IR are marginally too high. All of the aforementioned models are inconsistent with our analysis at the >3{sigma} level.

79 ASTRONOMY AND ASTROPHYSICS↗