Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Low frequency radio emissions from Jupiter - Jovian kilometric radiation

A new component of the Jovian radio spectrum has been observed by the plasma wave instruments on Voyager 1 and 2 at frequencies ranging from about 10 to 56 kHz or higher. This Jovian kilometric radiation is characterized by storms of emissions lasting typically 45 minutes at 56.2 kHz, however some events persist for as long as four hours. The storms usually exhibit impulsive bursts with time scales of a few seconds to several minutes, although some events show smoothly varying intensities as a function of time. High resolution frequency-time spectrograms reveal a continuum-like background with more intense, narrowband features superimposed. The narrowband, or discrete, features tend to decrease in frequency with increasing time, falling about 1 kHz in 5 to 60 seconds. The maximum power emitted assuming an isotropic radiator near Jupiter and a bandwidth for the most intense bursts of about 10 kHz is about 10 to the 19th watts. The Jovian kilometric radiation is most likely observed within + or - 45 deg of 200 deg System III longitude, lambda III, although there is a secondary maximum near lambda III = 25 deg.

Kurth, W. S.↗
NASA NTRS1988

Experimental results on atomic oxygen corrosion of silver

The results of an experimental study of the reaction kinetics of silver with atomic oxygen in 10 degree increments over the temperature range of 0 to 70 C is reported. The silver specimens, of the order of 10,000 A in thickness, were prepared by thermal evaporation onto 3 inch diameter polished silicon wafers. There were later sliced into pieces having surface areas of the order of 1/4 to 1/2 square inch. Atomic oxygen was generated by a gas discharge in a commercial plasmod asher operating in the megahertz frequency range. The sample temperature within the chamber was controlled by means of a thermoelectric unit. Exposure of the silver specimens to atomic oxygen was incremental, with oxide film thickness measurements being carried out between exposures by means of an automated ellipsometer. For the early growth phase, the data can be described satisfactorily by a logarithmic growth law: the oxide film thickness increases as the logarithm of the exposure time. Furthermore, the oxidation process is thermally activated, the rate increasing with increasing temperature. However, the empirical activation energy parameter deduced from Arrhenius plots is quite low, being of the order of 0.1 eV.

Fromhold, Albert T.↗
DOE OSTI2013

SCALING OF THE ELECTRON DISSIPATION RANGE OF SOLAR WIND TURBULENCE

Electron scale solar wind (SW) turbulence has attracted great interest in recent years. Considerable evidence exists that the turbulence is not fully dissipated near the proton scale, but continues cascading down to electron scales. However, the scaling of the magnetic energy spectra as well as the nature of the plasma modes involved at those small scales are still not fully determined. Here we survey 10 yr of the Cluster STAFF search-coil magnetometer waveforms measured in the SW and perform a statistical study of the magnetic energy spectra in the frequency range [1, 180] Hz. We found that 75% of the analyzed spectra exhibit breakpoints near the electron gyroscale ρ{sub e}, followed by steeper power-law-like spectra. We show that the scaling below the electron breakpoint cannot be determined unambiguously due to instrumental limitations that we discuss in detail. We compare our results to those reported in other studies and discuss their implications for the physical mechanisms involved and for theoretical modeling of energy dissipation in the SW.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Dielectric spectroscopy at the nanoscale by atomic force microscopy: A simple model linking materials properties and experimental response

The use of an atomic force microscope for studying molecular dynamics through dielectric spectroscopy with spatial resolution in the nanometer scale is a recently developed approach. However, difficulties in the quantitative connection of the obtained data and the material dielectric properties, namely, frequency dependent dielectric permittivity, have limited its application. In this work, we develop a simple electrical model based on physically meaningful parameters to connect the atomic force microscopy (AFM) based dielectric spectroscopy experimental results with the material dielectric properties. We have tested the accuracy of the model and analyzed the relevance of the forces arising from the electrical interaction with the AFM probe cantilever. In this way, by using this model, it is now possible to obtain quantitative information of the local dielectric material properties in a broad frequency range. Furthermore, it is also possible to determine the experimental setup providing the best sensitivity in the detected signal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Analysis of an anti-reflecting nanowire transparent electrode for solar cells

Transparent electrodes are an important component in many optoelectronic devices, especially solar cells. In this study, we investigate a nanowire transparent electrode that also functions as an anti-reflection coating for silicon solar cells, taking into account the practical constraints that the electrode is typically encapsulated and needs to be in electric contact with the semiconductor. Numerical simulations show that the electrode can provide near-perfect broadband anti-reflection over much of the frequency range above the silicon band gap for both polarizations while keeping the sheet resistance sufficiently low. To provide insights into the physics mechanism of this broadband anti-reflection, we introduce a generalized Fabry–Perot model, which captures the effects of the higher order diffraction channels as well as the modification of the reflection coefficient of the interface introduced by the nanowires. This model is validated using frequency-domain electromagnetic simulations. Finally, our work here provides design guidelines for nanowire transparent electrode in a device configuration that is relevant for solar cell applications.

14 SOLAR ENERGY↗
DOE OSTI2019

Spectral Characteristics of Daily to Seasonal Ground Motion at the Piñon Flats Observatory from Coherence of Seismic Data

We investigate coherences of seismic data recorded during three years (2015–2017) at the Piñon Flats Observatory (PY) array and a collocated 148 m deep borehole station B084, along with oceanic data from a buoy southwest of the PY array. Seismic and barometric recordings at PY stations are analyzed with a multitaper spectral technique. The coherence of signals from seismic sources is >0.6 at 0.05–8 Hz between closely spaced (<65m) surface stations and decreases to ~0.2 in frequency bands in which the wavelengths are smaller than interstation distances. There are several local coherence increases at 1–8 Hz between nearby (<65 m) surface stations, whereas large coherence values between a surface and 148 m deep borehole stations are only present at the secondary microseism (~0.14 Hz). These points to significant modification of seismic recordings in the top crust, and those continual near-surface failures might produce shallow rapidly attenuating signals at surface stations. Incoherent local atmospheric effects induce incoherent seismic signals in low- and high-frequency ranges through different coupling mechanisms. Between 0.003 and 0.05 Hz, atmospheric loadings generate ground tilts that contaminate the two horizontal seismic recordings and decrease their coherence, whereas the vertical component is less affected. At 1–8 Hz, coupling of atmospheric pressure with surface structures transmits incoherent signals into the ground, degrading the seismic coherence in all three components. The two horizontal coherences show seasonal variations with extended coherent frequency bands in winter and spring, likely to be produced by seasonal variations in microseisms and local ground tilts. The coherences also contain high anomalies between 2 and 4 Hz resulting from anthropogenic activities. The results provide useful information on instrument characteristics and variations in the shallow crustal response to earthquakes, seasonal and ambient sources of seismic energy, along with atmospheric pressure–temperature changes and anthropogenic activities.

Geochemistry & Geophysics↗
NASA NTRS1974

Scientific instrumentation of the Radio-Astronomy-Explorer-2 satellite

The RAE-2 spacecraft has been collecting radio astronomical measurements in the 25 kHz to 13 MHz frequency range from lunar orbit since June, 1973. A summary is given of the technical aspects of the program including the calibration, instrumentation and operation of the RAE-2 experiments. Performance of the experiments over the first 18 months of the flight is summarized and illustrated. Among the unique features of the RAE-2 is the capability to observe repeated lunar occultations of strong radio sources at very low frequencies.

Alexander, J. K.↗
NASA NTRS1990

Source of O mode radio emissions from the dayside of Uranus

During the inbound trajectory toward Uranus, the Planetary Radio Astronomy instrument on Voyager 2 observed narrow-band smooth (n-smooth) emission at frequencies centered near 60 kHz and O-mode emission (the dayside source) in a frequency range narrowly confined around 160 kHz. Assuming empirical models of the plasma density for the dayside magnetosphere of Uranus, and using cold plasma theory together with observational constraints, ray-tracing calculations are performed to determine the source location of the O-mode emission. The dayside source appears to originate along magnetic field lines with a footprint near the north magnetic pole. Sources of nightside high-frequency broadband smooth (b-smooth) emission observed by Voyager after encounter are believed to exist near the conjugate footprint of these same field lines. This would indicate that the particle population supplying the free energy source has energies at least as high as a few keV.

Menietti, J. D.↗
NASA NTRSDate not supplied

Perturbations in Brain Functional Connectivity Patterns After Waking From Slow Wave Sleep Under Different Cognitive States

Sleep inertia refers to the state of transition between sleep and wake characterized by impaired alertness, confusion, and reduced cognitive and behavioral performance. While the behavioral symptoms of sleep inertia are well described, the neurological changes that lead to this state remain elusive. Here, to understand the state of sleep inertia and the reorganization that the brain undergoes, we took a graph theoretical approach and compared the EEG derived brain connectivity patterns before sleep and after waking up while participants (n = 10) performed multiple tasks that differed in cognitive complexities. We focused on how the degree and the clustering coefficient of brain regions (EEG sensors) change immediately after participants wake up from slow wave sleep. During a psychomotor vigilance task (PVT), designed to assess vigilant attention, we find that the brain regions with strong network connectivity (degree) before sleep show a reduction in connectivity after waking. In contrast, those with low connectivity before sleep have greater connectivity after waking. The regions that undergo these changes are specific to each participant and these findings are unique to the beta frequency range, which plays a key role in sensorimotor functioning and preserving the current state of the brain. Moreover, in tasks that required inhibitory control and arithmetic reasoning, we found that only regions with weak connectivity before sleep exhibited more connections after waking, but regions with high connectivity prior to sleeping remained unchanged, highlighting task specific effects. Furthermore, we find that during the PVT, the clustering coefficient within low frequency oscillations of the brain is reduced upon waking while it remains unchanged during other tasks. These results suggest that the connections between regions that are lost after abrupt awakening can be reallocated to other regions in order to renormalize the brain. However, this response may only be evident during specific cognitive states and may be more nuanced during complex task performance.

sleep inertia↗
DOE OSTI2018

Time-dependent view of an isotope effect in electron-nuclear nonequilibrium dynamics with applications to N 2

Isotopic fractionation in the photodissociation of N 2 could explain the considerable variation in the 14 N/ 15 N ratio in different regions of our galaxy. We previously proposed that such an isotope effect is due to coupling of photoexcited bound valence and Rydberg electronic states in the frequency range where there is strong state mixing. We here identify features of the role of the mass in the dynamics through a time-dependent quantum-mechanical simulation. The photoexcitation of N 2 is by an ultrashort pulse so that the process has a sharply defined origin in time and so that we can monitor the isolated molecule dynamics in time. An ultrafast pulse is necessarily broad in frequency and spans several excited electronic states. Each excited molecule is therefore not in a given electronic state but in a superposition state. A short time after excitation, there is a fairly sharp onset of a mass-dependent large population transfer when wave packets on two different electronic states in the same molecule overlap. This coherent overlap of the wave packets on different electronic states in the region of strong coupling allows an effective transfer of population that is very mass dependent. The extent of the transfer depends on the product of the populations on the two different electronic states and on their relative phase. It is as if two molecules collide but the process occurs within one molecule, a molecule that is simultaneously in both states. An analytical toy model recovers the (strong) mass and energy dependence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Long-term calibration and validation of stability of the Auger Engineering Radio Array using the diffuse Galactic radio emission

The Auger Engineering Radio Array (AERA) measures radio emission from high-energy extensive air showers. Consisting of 153 autonomous radio-detector stations spread over 17 km^2, it detects radio waves in the frequency range of 30 to 80 MHz. Accurate characterization of the detector response is crucial for proper interpretation of the collected data. Previously, this was achieved through laboratory measurements of the analog chain and simulations and measurements of the antenna's directional response. In this paper, we perform an absolute calibration using the continuously monitored sidereal modulation of the diffuse Galactic radio emission. Calibration is done by comparing the average frequency spectra recorded by the stations with predictions from seven different models of the full radio sky, accounting for the system response, which includes the antenna, filters, and amplifiers. The analysis of the calibration constants over a period of seven years shows no relevant and no significant ageing effect in the AERA antennas. This result confirms the long-term stability of the detector stations and demonstrates the possibility for a radio detector to effectively monitor ageing effects of other detectors operating over extended periods.

Antennas↗
NASA NTRS1991

Reoptimization of the Ohio State University radio telescope for the NASA SETI program

The Ohio State University radiotelescope is the second largest radio telescope in the United States, equivalent in collecting area (2200 sq m) to a 175-foot diameter dish. For the past 17 years it has been dedicated fulltime to SETI, and it is now being considered by NASA for selection as the NASA dedicated SETI observatory. The telescope was originally designed, optimized, and used as an all-sky survey instrument to create detailed maps and catalogs of the radio astronomical sky. For the SETI Program, some re-optimizations are required. Right ascension tracking for one to two hours (depending on the declination) was achieved by exploiting the exceptionally large f/d ratio of the telescope. The feed horns were mounted on a large moveable, rubber-tired cart which is capable of a total motion of 100 feet. The cart can carry many horns, making possible simultaneous observations at many sky directions and frequency ranges. Rapid declination movement and its automation will be accomplished through simplification of the existing braking system, and replacement of older mechanical sensors by modern electronic inclinometers and proximity detectors. Circular polarization capability will be achieved through an increase in the number of horizontal wires in the reflector mesh, or addition of a finer mesh on top of the existing one. The telescope has great inherent resistance to radio frequency interference, due to its ground-mounted feed horns and shielding by the large reflectors of half the horizon. The resistance was recently increased further by installation of rolled-edges and diffraction-trapping gratings on the feed horns. If further shielding should be required, inexpensive side shields could be added to the telescope, making it a totally closed structure on all four sides.

Dixon, R. S.↗
NASA NTRS2000

Development Towards a Space Qualified Laser Stabilization System in Support of Space-Based Optical Interferometers

We report on the development, functional performance and space-qualification status of a laser stabilization system supporting a space-based metrology source used to measure changes in optical path lengths in space-based stellar interferometers. The Space Interferometry Mission (SIM) and Deep Space 3 (DS-3) are two missions currently funded by the National Aeronautics and Space Administration (NASA) that are space-based optical interferometers. In order to properly recombine the starlight received at each telescope of the interferometer it is necessary to perform high resolution laser metrology to stabilize the interferometer. A potentially significant error source in performing high resolution metrology length measurements is the potential for fluctuations in the laser gauge itself. If the laser frequency or wavelength is changing over time it will be misinterpreted as a length change in one of the legs of the interferometer. An analysis of the frequency stability requirement for SIM resulted in a fractional frequency stability requirement of square root (S(sub y)(f)) = <2 x 10(exp -12)/square root(Hz) at Fourier frequencies between 10 Hz and 1000 Hz. The DS-3 mission stability requirement is further increased to square root (S(sub y)(f)) = <5 x 10(exp -14)/Square root(Hz) at Fourier frequencies between 0.2 Hz and 10 kHz with a goal of extending the low frequency range to 0.05 Hz. The free running performance of the Lightwave Electronics NPRO lasers, which are the baseline laser for both SIM and DS-3 vary in stability and we have measured them to perform as follows (9 x l0(exp -11)/ f(Hz))(Hz)/square root(Hz)) = <( square root (S(sub y)(f)) = <(1.3 x l0(exp -8)/ f(Hz))/Square root(Hz). In order to improve the frequency stability of the laser we stabilize the laser to a high finesse optical cavity by locking the optical frequency of the laser to one of the transmission modes of the cavity. At JPL we have built a prototype space-qualifiable system meeting the stability requirements of SIM, which has been delivered to one of the SIM testbeds. We have also started on the development of a system to meet the stability needs of DS-3.

Seidel, David J.↗
NASA NTRS2015

Characterization of Flap Edge Noise Radiation from a High-Fidelity Airframe Model

The results of an experimental study of the noise generated by a baseline high-fidelity airframe model are presented. The test campaign was conducted in the open-jet test section of the NASA Langley 14- by 22-foot Subsonic Tunnel on an 18%-scale, semi-span Gulfstream airframe model incorporating a trailing edge flap and main landing gear. Unsteady surface pressure measurements were obtained from a series of sensors positioned along the two flap edges, and far field acoustic measurements were obtained using a 97-microphone phased array that viewed the pressure side of the airframe. The DAMAS array deconvolution method was employed to determine the locations and strengths of relevant noise sources in the vicinity of the flap edges and the landing gear. A Coherent Output Power (COP) spectral method was used to couple the unsteady surface pressures measured along the flap edges with the phased array output. The results indicate that outboard flap edge noise is dominated by the flap bulb seal cavity with very strong COP coherence over an approximate model-scale frequency range of 1 to 5 kHz observed between the array output and those unsteady pressure sensors nearest the aft end of the cavity. An examination of experimental COP spectra for the inboard flap proved inconclusive, most likely due to a combination of coherence loss caused by decorrelation of acoustic waves propagating through the thick wind tunnel shear layer and contamination of the spectra by tunnel background noise at lower frequencies. Directivity measurements obtained from integration of DAMAS pressure-squared values over defined geometric zones around the model show that the baseline flap and landing gear are only moderately directional as a function of polar emission angle.

Humphreys, William M., Jr.↗
DOE OSTI2015

Metaporous layer to overcome the thickness constraint for broadband sound absorption

The sound absorption of a porous layer is affected by its thickness, especially in a low-frequency range. If a hard-backed porous layer contains periodical arrangements of rigid partitions that are coordinated parallel and perpendicular to the direction of incoming sound waves, the lower bound of the effective sound absorption can be lowered much more and the overall absorption performance enhanced. The consequence of rigid partitioning in a porous layer is to make the first thickness resonance mode in the layer appear at much lower frequencies compared to that in the original homogeneous porous layer with the same thickness. Moreover, appropriate partitioning yields multiple thickness resonances with higher absorption peaks through impedance matching. The physics of the partitioned porous layer, or the metaporous layer, is theoretically investigated in this study.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Listening for new physics with quantum acoustics

We present a novel application of a qubit-coupled phonon detector to search for new physics, e.g., ultralight dark matter (DM) and high-frequency gravitational waves. The detector, motivated by recent advances in quantum acoustics, is composed of superconducting transmon qubits coupled to high-overtone bulk acoustic resonators (ℎ⁡BARs) and operates in the GHz−10 GHz frequency range. New physics can excite 𝒪⁡(10 μ⁢eV) phonons within the ℎ⁡BAR, which are then converted to qubit excitations via a transducer. We detail the design, operation, backgrounds, and expected sensitivity of a prototype detector, as well as a next-generation detector optimized for new physics signals. We find that a future detector can complement current haloscope experiments in the search for both dark photon DM and high-frequency gravitational waves. Lastly, we comment on such a detector’s ability to operate as a 𝒪⁡(10 μ⁢eV) athermal phonon sensor for sub-GeV DM detection.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

Magnetic field dependence of nonlinear magnetic response and tricritical point in the monoaxial chiral helimagnet Cr 1 / 3 Nb S 2

We present a comprehensive study of the magnetization dynamics and phase evolution in the chiral helimagnet Cr 1/3 NbS 2 , which realizes a chiral soliton lattice (CSL). The magnetic field dependence of the ac magnetic response is analyzed for the first five harmonic components, M nω (H ) (n = 1–5), using a phase sensitive measurement over a frequency range, f = 11–10 000 Hz. At a critical field, the modulated CSL continuously evolves from a helicity-rich to a ferromagnetic domain-rich structure, where the crossover is revealed by the onset of an anomalous nonlinear magnetic response that coincides with extremely slow dynamics. The behavior is indicative of the formation of a spatially coherent array of large ferromagnetic domains, which relax on macroscopic time scales. The frequency dependence of the ac magnetic loss displays an asymmetric distribution of relaxation times across the highly nonlinear CSL regime, which shift to shorter time scales with increasing temperature. We experimentally resolve the tricritical point at T TCP in a temperature regime above the ferromagnetic Curie temperature which separates the linear and nonlinear magnetic regimes of the CSL at the phase transition. A comprehensive phase diagram is constructed which summarizes the features of the field and temperature dependence of the magnetic crossovers and phase transitions in Cr 1/3 NbS 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Phonon engineering of boron nitride via isotopic enrichment

Phonon polaritons (PhPs) enable a variety of applications, yet it requires PhPs supported in the desired frequency range. The two BN allotropes (cubic and hexagonal, cBN and hBN) are of particular interest, as their optic phonons fall within the so-called molecular-fingerprint region (~ 1000–1610 cm -1 ). However, there remains a spectral gap between PhPs covered by these two, limiting applications. Thus, we isotopically engineered hBN and cBN and examined the optic phonons. Furthermore, for hBN, enhancement of the optic phonon lifetimes and shifted frequencies are observed. However, lifetimes are observed to decrease with the enrichment of cBN by 10 B, 11 B, and 15 N. We propose that the reduced lifetimes are not due to intrinsic loss, but rather increased defect concentrations resulting from the modified growth, supported by first-principles calculations. Thus, reducing the extrinsic defects in isotopically engineered cBN may present a path toward overcoming these restrictions for applications in the molecular-fingerprint region.

36 MATERIALS SCIENCE↗