Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Stress- and Time-Dependent Formation of Self-Lubricating In Situ Carbon (SLIC) Films on Catalytically-Active Noble Alloys

Abstract Low shear strength (30 MPa) organic films were grown in situ on Pt 0.9 Au 0.1 surfaces via cyclic sliding contact in dry N 2 with trace concentrations of ambient hydrocarbons. We present a systematic investigation of the stress- and time-dependent film formation. Steady-state friction coefficients were found to be as low as µ ~ 0.015 and inversely proportional to contact pressure, revealing non-Amontonian behavior. Above a Hertzian contact pressure of ~500 MPa, shear strength dropped, indicating an activated process. Raman spectroscopy identified non-uniformity in areal coverage and relative order with contact pressure. Regions of steady-state low-friction behavior exhibited spectra similar to DLC coatings. Atomic force microscopy was used to study the formation and growth of films at the nanoscale. Stress- and time-dependent measurements suggested a sublinear increase of film volume with time, and a transition from growth to wear at a Hertzian contact pressure of ~1.2 GPa.

Jones, Morgan R.↗
DOE OSTI2021

The role of precursor decomposition in the formation of samarium doped ceria nanoparticles via solid-state microwave synthesis

The impact on the final morphology of ceria (CeO 2 ) nanoparticles made from different precursors (commercial: cerium acetate/nitrate) and in house: cerium tri(methylsilyl)amide (Ce-TMSA)) via a microwave solid state reaction has been determined. In all instances, powder X-ray diffraction indicated that the cubic fluorite CeO 2 phase (PDF# 04–004-9150, with the space group Fm-3 m) had formed. Scanning electron microscopy (SEM) images revealed spherical nanoparticles were produced from the Ce-TMSA precursor. The commercial acetate and nitrate precursors produced particles with irregular morphology. The roles of the precursor decomposition and binding energy in the synthesis of the nanocrystals with various morphologies, as well as a possible growth mechanism, were evaluated based on experimental and computational data. The formation of spherical shaped nanoparticles was determined to be due to the preferential single-step decomposition of the Ce-TMSA as well as the low activation energy to overcome decomposition. Due to the complicated decomposition of the commercial precursors and high activation energy the resulting particles adopted an irregular morphology. Highly uniform samarium doped ceria (Sm x Ce 1-x O 2-δ ) nanospheres were also synthesized from Ce-TMSA and samarium tri(methylsilyl)amide (Sm-TMSA). The effects of reaction time and temperature, on the final morphology were observed through SEM. The rapid single-step decomposition of TMSA-based precursors as observed through thermogravimetric analysis (TGA) and confirmed through the calculation of potential energy surfaces and binding energies from density functional theory (DFT) calculations, indicated that nanoparticle formation follows LaMer’s classical nucleation theory.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Data-driven discovery of a formation prediction rule on high-entropy ceramics

The interest in high entropy ceramics (HECs) has increased steadily due to their superior properties. However, the prediction of their formation still poses challenges for the discovery of new systems. Here, we discover a rational rule for designing single-phase high entropy metal diborides (HEBs) using data-driven approach. The machine learning (ML) model is trained on data collected via high-throughput experiments (HTEs). K nearest neighbor (KNN) model shows an experimental validation accuracy of 93.75%. By implementing interpretable ML method, we demonstrate that a mismatch of the bonds between boron and transition metals (δ B-TM ) dominates the formation of HEBs. We propose an empirical rule that HEBs favor forming a single phase when δ B-TM < 3.66; otherwise, multiphase. The rule has a high accuracy of 93.33% for new HEBs predictions. In addition, we contribute 165 high quality HEBs data in total, which can promote the development of materials informatics in HEBs. Furthermore, this data-driven strategy can be expanded to accelerate the search for new HECs, paving a pathway to design novel HECs with superior properties rapidly.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controlling solute channel formation using magnetic fields

Solute channel formation introduces compositional and microstructural variations in a range of processes, from metallic alloy solidification, to salt fingers in ocean and water reservoir flows. Applying an external magnetic field interacts with thermoelectric currents at solid/liquid interfaces generating additional flow fields. This thermoelectric (TE) magnetohydrodynamic (TEMHD) effect can impact on solute channel formation, via a mechanism recently drawing increasing attention. To investigate this phenomenon, we combined in situ synchrotron X-ray imaging and Parallel-Cellular-Automata-Lattice-Boltzmann based numerical simulations to study the characteristics of flow and solute transport under TEMHD. Observations suggest the macroscopic TEMHD flow appearing ahead of the solidification front, coupled with the microscopic TEMHD flow arising within the mushy zone are the primary mechanisms controlling plume migration and channel bias. Two TE regimes were revealed, each with distinctive mechanisms that dominate the flow. Further, we show that grain orientation modifies solute flow through anisotropic permeability. These insights led to a proposed strategy for producing solute channel-free solidification using a time-modulated magnetic field.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of controlled prewetting on part formation in binder jet additive manufacturing

Binder jetting is an additive manufacturing process that bonds powder through selectively depositing binder by inkjet printing. The part is then extracted and densified by sintering and/or infiltration. The process offers low costs and fast build rates, but properties can be poor due to residual porosity after sintering. The inkjet printing process may contribute to this residual porosity by creating large pores. The droplet kinetic energy ejects some powder particles from the bed and rearranges others. Particle ejection and rearrangement are theorized to create porous regions in binder-jetted parts. In this work, small amounts of moisture are added to the spread powder before printing and the impact on part formation, part properties, and printing parameters measured with varied droplet spacing, droplet velocity, and print frequency. Moisture is added by applying an atomized fluid mixture to the powder between layer spreading and binder printing. The fluid mixture partially evaporates but leaves a stable residue to increase cohesion and enhance imbibition. Moisture addition to the powder increases the range of droplet spacings for line formation while reducing particle ejection, powder rearrangement, and balling in layer and multilayer parts. Excessive moisture addition decreases the effective saturation of printed lines, but saturation in 3D parts is less impacted. Increased surface roughness in the first few layers of a print was also mitigated with prewetting. Finally, high-speed X-ray imaging verified prewetting reduction in particle ejection and rearrangement.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of a kinetic model to describe six types of symbiotic interactions in a formate utilizing microalgae-bacteria cultivation system

This study investigated an algae/formate-utilizing-bacteria system that has been developed for carbon capture. This photomixotrophic consortium consumed formate to support bacterial growth so that the resulting respiration CO 2 could be simultaneously used by algae to avoid CO 2 gas-lipid mass transfer limitation. To understand biomass growth and population interactions in this unique system, a kinetic model has been developed to describe algae and bacteria multiplication, formate and nitrogen utilizations, CO 2 mass transfer, O 2 generation and consumption, lighting condition and shading effect. The simulation indicated that this ecosystem could form six types of interactions (mutualism, commensalism, parasitism, neutralism, amensalism, and competition) depending on the light intensity and nutrient availability. Furthermore, the simulation of both batch culture and chemostat, along with parameter sensitivity tests and experimental observations, offered insights into optimal applications of algae-bacteria consortium based photobiorefinery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Suppressing CO formation in low-temperature methanol steam reforming via Ce-modified CuZnGa layered oxide catalysts

Cu-based layered double hydroxides (LDHs) are widely recognized as effective catalysts for low-temperature methanol steam reforming, yet achieving high hydrogen productivity together with near-complete suppression of CO formation remains challenging. Here, we report the synthesis and evaluation of a series of CuZnGa LDH-derived catalysts and Ce-modified analogues prepared via an aqueous miscible organic method, which enables high metal dispersion and precise structural control. The optimized CuZnGa catalyst exhibits a hydrogen production rate of 16.9 µmol H 2 ·g cat −1 ·s −1 at 180 °C with an H 2 /CO ratio exceeding 3500, outperforming many state-of-the-art low-temperature systems. Importantly, the incorporation of small amounts of Ce further suppresses CO formation while maintaining high hydrogen productivity. Combined spectroscopic characterization and density functional theory calculations reveal that Ce is incorporated into the LDH lattice by substituting Ga 3+ sites up to a critical threshold, beyond which highly dispersed CeO x species are formed. These species provide mobile lattice oxygen that participates in a Mars-van Krevelen-type pathway, selectively oxidizing CO and suppressing the reverse water-gas shift reaction. This study establishes a clear relationship between Ce speciation, oxygen mobility, and catalytic selectivity in LDH-derived systems. The resulting catalysts demonstrate the potential of interface-engineered Cu-based materials for efficient low-temperature hydrogen production with minimal CO contamination.

09 BIOMASS FUELS↗
DOE OSTI2023

Investigation on the explosion dynamics of large-format lithium-ion pouch cells

Explosion is the most extreme case of thermal runaway of lithium-ion (Li-ion) batteries. In this study, explosion dynamics of large-format Li-ion cells are investigated experimentally and numerically. Overcharge-to-explosion tests are conducted on 40 Ah Li-ion cells with Li[Ni 0.8 Co 0.1 Mn 0.1 ]O 2 cathode. Based on the explosion physics, shockwave and detonation models are used to characterize the shock effect of the cell explosion and evaluate the explosion equivalent. Von Neumann peak is observed on the pressure curves, and the shockwave velocity is supersonic at this time; the unwrinkled spherical flame phenomenon observed in the experiment indicates that it is detonation. Additionally, a geometric model is established based on the real testing scenario, and the explosion behavior is numerically studied. The characteristics of the explosion dynamics process are interpreted and the propagation mechanism of the shockwave are revealed; the deflagration to detonation transition (DDT) phenomenon in this process is caused by the formation of “hot spots”, and the explosion of the cells eventually turns into stable combustion. Here this study fills the gap in the research on thermal runaway of Li-ion cells, especially in the extreme cases of fire and explosion, and provide useful guidance for battery safety.

42 ENGINEERING↗
DOE OSTI2025

Scanning tunneling microscope tip-induced formation of Bi bilayers on Bi 2 Te 3

We report the formation of Bi(111) bilayer islands and crater structures on Bi 2 Te 3 (111) surfaces induced by voltage pulses from a scanning tunneling microscope tip. Pulses above a threshold voltage (+3 V) produce craters ∼0.5μm in diameter, similar to the size of the tip. Redeposited material self-assembles into a network of atomically ordered islands with a lattice constant identical to the underlying Bi2Te3 surface. The island size monotonically decreases over several micrometers from the pulse site, until the pristine Bi 2 Te 3 surface is recovered. We assign these islands to Bi bilayer based on atomic resolution images, analysis of step heights, and tunneling spectroscopy. Here, the dependence of bilayer formation on bias polarity and the evidence for defect diffusion together suggest a mechanism driven by the interplay of field evaporation and tunneling-current-induced Joule heating.

Bi bilayer↗
DOE OSTI2022

Acetate formation on metals via CH 4 carboxylation by CO 2 : A DFT study

Here, density functional theory calculations have been performed to investigate CH 4 activation and coupling to CO 2 forming C 2 carboxylates such as acetate on the close-packed (111) or (0001) surfaces of ten mid-to-late transition and coinage metals (Co, Ni, Cu, Ru, Rh, Pd, Ag, Ir, Pt, and Au). Consistent with the literature, the activation energy (E a ) for the initial C-H bond scission in CH 4 is mild, being ca. 1 eV or less on all but the coinage metals, of which Ag exhibits the highest E a at 2.13 eV, followed by Au and Cu. E a for the CH 3 -CO 2 coupling step is 0.8 ~ 1.1 eV on Co, Ru, Rh, and Ag, 1.2 ~ 1.5 eV on Ni, Cu, Pd, and Ir, and 1.8 ~ 2.1 eV on Pt and Au. While the two E a are comparable for several metals in terms of DFT total energies, free energy analysis indicates CH 3 -CO 2 coupling to be much more rate-limiting than CH 4 activation. Overcoming it would require over 800 K even on the most active of the metals considered, Ru, which makes the formation of acetate not feasible on the monometallic metal surfaces. Instead, we propose that single atom alloys based on early transition metals doped into a host metal such as Ni(111) could be viable catalysts. The dopant sites serve to stabilize the transition state of C-C coupling while Ni sites continue to activate CH 4 , thereby significantly lowering the required temperature for acetate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

NO formation by N 2 /O 2 plasma catalysis: The impact of surface reactions, gas-phase reactions, and mass transport

Pathways and timescales relevant to facilitate plasma-assisted N 2 -O 2 reactions are assessed by measuring the consumption of plasma-derived N and the formation of NO in the gas phase and over Ag catalytic surfaces. These measurements are enabled by a setup that enables N 2 activation in an atmospheric pressure RF plasma jet, enables O 2 addition in the plasma afterglow, facilitates reactions over an Ag wire catalyst, and allows species density quantification by molecular beam mass spectrometry. Gas-phase reactions consume N but do not form NO with high selectivity. The presence of the non-porous Ag wire catalyst increases the rate of N conversion to NO, though mass transfer processes, not surface reactions, dictate the rate of N consumption. When O 2 concentrations and the ratio of the surface area of the catalyst to the void volume of the reactor are high (3–5 mol% O 2 , 10900 m –1 ), N conversion to NO reaches 100 % selectivity. When both N 2 and O 2 are fed through the plasma jet, gas-phase NO production increases 10×, although plasma and gas-phase processes do not exclusively produce NO. Above a threshold NO density, N cannot diffuse to the catalyst surface faster than it is consumed in the gas phase by reactions with NO. Furthermore, the use of heterogeneous catalysts to enhance plasma-driven N x O y formation and control N x O y product selectivity is limited to cases where diffusive transport of N from the gas phase to the catalyst surface is faster than consumption of N from gas-phase reactions with NO.

Engineering↗
DOE OSTI2025

High-current-density electrosynthesis of formate from captured CO 2 solution by MOF-derived bismuth nanosheets

Greenhouse gas emissions present a significant challenge to humanity, and utilizing renewable electricity to convert emitted CO 2 into value-added products offers a promising solution; however, traditional CO 2 capture and regeneration processes remain energy-intensive, restricting the overall system efficiency and decarbonization efficacy. In this study, an advanced direct reduction of captured CO 2 with large current densities for formate electrosynthesis was demonstrated without the need for CO 2 regeneration or compression. The bismuth nanosheet (DRM-BiNS) was synthesized by direct reduction of a Bi-based MOF, representing a new class of catalytic materials with a large surface area and interconnected pores, suitable for the direct reduction of captured CO 2 . By seamlessly combining experimentation and simulation, insights into the structure-parameter-performance relation were acquired in a flow cell setting, including critical membrane-electrode distance, cell orientation, and pumping flow rate. Important flow-cell components, such as catholyte volume, electrode substrate, membrane choice, and ionomer type, were also carefully examined to enhance the cell performance. In sharp contrast to prior studies limited to current densities below 20 mA/cm 2 in bicarbonate-based captured CO 2 solutions, this work demonstrates a remarkable current density of 300 mA/cm 2 with an FE to formate comparable to the case with gas-fed CO 2 reduction. Moreover, the process sustained an FE above 50% at a high current density of 500 mA/cm 2 . The DRM-BiNS catalyst exhibited outstanding selectivity, activity, and stability, significantly outperforming oxide-derived bismuth nanosheets (OD-BiNS) in captured CO 2 reduction. Furthermore, these findings offer critical insights into the development of sustainable and scalable CO 2 utilization technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Autogenous formation and smart behaviors of nitrite- and nitrate-intercalated layered double hydroxides (LDHs) in Portland cement-metakaolin-dolomite blends

In this work, the influence of sodium nitrite (NaNO{sub 2}) and sodium nitrate (NaNO{sub 3}) corrosion inhibitors on the composition, structure, and chloride binding behaviors of layered double hydroxides (LDHs) formed in ternary ordinary Portland cement-metakaolin-dolomite (OPC-MK-DM) systems is studied. The results show that the nitrite and nitrate anions are preferably intercalated in the CaAl LDHs (AFm phases), but not in the MgAl LDHs (hydrotalcite-type phases) due to its limited formation in these ternary cementitious systems cured at ambient temperature. The autogenously formed nitrate- and nitrite-AFm phases are decomposed upon chloride exposure accompanied by Friedel's salts formation, potentially releasing corrosion inhibitive ions to the pore solution in a progressive manner. The NaNO{sub 2} and NaNO{sub 3} incorporation in ternary OPC-MK-DM binders marginally lowers chloride binding capacity but reduces its penetration resistance mainly due to pore coarsening. Nevertheless, a strong linear correlation can be established between the water-soluble and total chloride contents in ternary OPC-MK-DM systems, regardless of OPC replacement level and corrosion inhibitor incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

GeoMicro3D: A novel numerical model for simulating the reaction process and microstructure formation of alkali-activated slag

Highlights: • The GeoMicro3D model was innovatively developed for simulating the reaction process and microstructure formation of AAS. • In GeoMicro3D, the dissolution of slag and reactions of aqueous ions are fundamentally described in the local lattice cell. • A novel approach is proposed to speed up the nucleation simulations. • GeoMicro3D was implemented and verified with the relevant experimental data and thermodynamic calculation results. For the first time, this study developed a novel model, named GeoMicro3D, to simulate the reaction process and microstructure formation of alkali-activated slag. The GeoMicro3D model consists of four modules that are designed to simulate, respectively: (i) the initial spatial distribution of real-shape slag particles in alkaline activator, (ii) the dissolution of slag and diffusion of ions via the transition state theory and lattice Boltzmann method, respectively, (iii) the spatial distribution of reaction products using a nucleation probability theory, and (iv) the chemical reactions with thermodynamic modelling. Afterwards the GeoMicro3D model was implemented and verified. The simulation results were discussed and compared with the relevant experimental data and thermodynamic calculation results using GEMS. A good agreement was found in the comparisons, showing the strong simulation capability of GeoMicro3D.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical mechanisms and kinetic modeling of calcium aluminate cements hydration in diluted systems: Role of aluminium hydroxide formation

Calcium aluminate cements are niche cements used in the refractory industry and in non-structural applications for building chemistry with short return-to-service delay. The later applications use theses cements in combination with calcium sulfates for long-term stability. By being niche cements, the knowledge of calcium aluminate cements hydration is not as extensive as that of Portland cement. In the present paper, the calcium aluminate cements are studied in diluted suspensions as a function of different parameters such as the suspension concentration or the quantity of added calcium sulfates. The objective is to identify their baseline chemical mechanisms. This work demonstrates the essential role of hydroxide ions fluxes, i.e. quantity going in and out of the liquid phase per unit of time. The main quantitative flux is the formation of aluminium hydroxide but the activation of this reaction is difficult. This difficulty allows calcium aluminate to be used as cement by creating a dormant period (workability) for the overall reactivity. The identification of the key role of aluminium hydroxide formation explains the influence of the temperature, some mechanisms of setting admixtures and the early age of calcium aluminate cements.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Evidence of formation of an amorphous magnesium silicate (AMS) phase during alkali activation of (Na-Mg) aluminosilicate glasses

Highlights: • No hydrotalcite-group phase is formed as Al preferentially incorporates into zeolites. • Mg forms an amorphous Mg silicate (AMS) phase. • AMS is a more depolymerized phase when compared to Mg silicate hydrate (M-S-H). • High charge density of Mg effectively stabilizes depolymerized silicates in AMS phase. • Existence of AMS phase should be considered as possibility in Mg-rich AAMs. There is some ambiguity regarding the fate of Mg during the alkali activation of Mg-rich precursors within the broader field of alkali activated materials (AAMs). The present work addresses this issue by studying the reaction products in AAMs synthesized from (Na-Mg) aluminosilicate glasses. Here, instead of magnesium silicate hydrate (M-S-H) phase, Mg exclusively forms an amorphous magnesium silicate (AMS) phase. Compared to M-S-H, AMS is a more depolymerized phase, which has not previously been well documented. The formation of AMS seems to be driven by the high charge density of the Mg cation which effectively stabilizes the depolymerized silicate species. We also show that the lack of hydrotalcite-group phases is due to aluminum depletion by zeolite formation. This work highlights the need to consider the existence of the AMS phase in Mg-containing AAMs, especially in complex systems, where its identification may be difficult.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Formation of hydrocarbons favored by high pressure at subduction zone conditions

Subduction zones enable carbon transport to the deep Earth. Inorganic and organic carbon in fluids released from the subducted slab are important in water-rock interactions. However, the potential role of reduced carbon species in fluids during subduction is still unclear. In particular, the pressure, temperature, and oxidation state conducive to the formation of fluid hydrocarbons are poorly understood. Here we focused on the role of pressure influencing the formation of hydrocarbons using diamond anvil cell experiments starting with 0.5 M Ca-acetate solutions over a broad range of pressures, from 1.6 to 4.6 GPa at temperatures of 300 and 350°C. Droplets of immiscible hydrocarbon fluid coexisting with aqueous carbonate or bicarbonate and crystals of calcite or aragonite were formed at peak pressure and temperature conditions in the experiments. Furthermore, greater quantities of hydrocarbons formed at higher pressure as revealed by measuring the in situ volume percent of the droplets. Measurement of the in situ Raman spectra of the co-existing aqueous solutions and analysis of the peak area ratios of acetate to HCO 3 – showed faster decrease at higher pressure, which indicated that the reactions forming hydrocarbons were accelerated by pressure. Compared to previous Na-acetate experiments at 300°C and 3.0 GPa, this study found hydrocarbons that were more methane-rich and had more propane and less isobutane. In experiments at 350°C, isobutane transformed to one or more aromatic hydrocarbons in an immiscible fluid. The air-dried aromatic hydrocarbons were measured using a UV laser, and show peaks of bitumen. Overall, our study supports the hypothesis that high pressures and high temperatures facilitate the possible occurrence of immiscible hydrocarbon fluids in the deep carbon cycle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Film formation mechanisms in mixed-dimensional 2D/3D halide perovskite films revealed by in situ grazing-incidence wide-angle X-ray scattering

We report mixed dimensionality 2D/3D hybrid halide perovskites retain the stability of 2D perovskites (formula (A')2(A)n-1PbnI3n+1) and long diffusion lengths of the 3D materials (formula AMX3), thereby affording solar cells with extended stability as well as state of the art efficiencies approaching that of the 3D materials. These films are made by spin coating precursor solutions with arbitrarily large average layer thickness n ($\langle$n$\rangle$ > 7) to give films with both 2D and 3D phases present. While the 2D and 3D perovskite film formation mechanisms have been studied previously, little is understood about composite 2D/3D film formation. We used in situ grazing-incidence wide-angle scattering (GIWAXS) with synchrotron radiation to fully characterize films fabricated from precursor solutions with stoichiometries of (BA) 2 (MA) n-1 Pb n I 3n+1 ($\langle$n$\rangle$ = 3, 4, 5, 7, “12,” “50,” and ∞ (MAPbI 3 )). Four different mechanisms are seen depending on the stoichiometry in the precursor solution. When $\langle$n$\rangle$ = 3, oriented perovskite grows directly. For $\langle$n$\rangle$ = 4-5, the needle-shaped solvate (MA) 2 Pb 3 I 8 ·2DMF forms concomitantly with the oriented perovskite which leads to 2D/3D composite films. For $\langle$n$\rangle$ ≥ 7, this solvate dominates and unoriented perovskite grows in secondarily. For 3D perovskite, the solvate is the only phase formed. Kinetic analysis shows faster and earlier growth of the solvate with increasing $\langle$n$\rangle$. Using this knowledge, we show that the undesirable solvate mechanism can be reduced by addition of excess ammonium iodide in the precursor solution to give highly oriented films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗